|
Id: WR373
 Chicago Pneumatic T650 Used Drill Rig for Sale
Worldrigs ID: WR373 Model : T650 Drill Rig
Manufacturer : Chicago Pneumatic
Condition : Used
Description :
Chicago Pneumatic T650 Drill Rig
GHH 600 CFM / 250 PSI Air Compressor
CAT D343 Diesel Deck Engine
Mounted on a Kenworth Truck
Diesel Engine
Location : USA
|  |
| |
|
Id: WR779
 Chicago Pneumatic T650 Drilling Rig - For Sale
Worldrigs ID: WR779
Model : T650 Drill Rig
Manufacturer : Chicago Pneumatic
Condition : As-Is
Description :
Chicago Pneumatic T650 Drill Rig
Mounted on a 6 x 6 Oshkosh Truck
Modified drill rig
Direct drive off of the truck engine
900 cfm / 350 psi air compressor
Location : USA
| |
| |
|
|
|
Id: WR699
 Chicago Pneumatic 650 S/S Drilling Rig for Sale
Worldrigs ID: WR699
Model : 650 S/S Drill Rig - for Parts or Repairs
Manufacturer : Chicago Pneumatic
Condition : Used
Description :
Chicago-Pneumatic Model 650 S/S Drill Rig
Condition: As Is - for parts or repairs
Used CP 650 S/S parts machine
Comes with control panel
Hydraulic valves in control panel
CO5 Air Compressor (750 CFM / 125 PSI)
Separator Tank
Rears on CCC Crane Carrier Company truck
Wheels
Oil Tank
Operators Cab
Hydraulic Jacks
Other miscellaneous items as shown in pictures
Note: All Items Sold "As Is"
Location : USA
| |
| |
|
Id: WR780
 Chicago Pneumatic T650 Drilling Rig for Sale
Worldrigs ID: WR780
Model : T650 Drill Rig
Manufacturer : Chicago Pneumatic
Condition : Used
Description :
Chicago Pneumatic T650 Drill Rig
mounted on an IH Truck
All original parts
Head need work
Good Parts Machine
Location : USA
| |
| |
|
|
|
Id: WR869
 Chicago Pneumatic 650 Drilling Rig for Sale
Worldrigs ID: WR869
Description :
1972 Chicago Pneumatic 650 Drill Rig
Sullair 750/250 air compressor (verifying the size & model)
Caterpillar 3306 Diesel Deck Engine
Gardner Denver 5x6 air driven mud pump
Hydraulic slide pipe rack
Winch
Mounted on a Ford 900 Truck (VIN #: T91KVN93939)
Caterpillar 3208 Diesel Engine
Bobcat welder
Location : USA
| |
| |
|
Id: WR695
 Chicago Pneumatic Drilling Rig - 1978 Built - For Sale
Worldrigs ID: WR695
Model : 650 S/S Drill Rig
Manufacturer : Chicago Pneumatic
Year : 1978
Condition : Used
Description :
1978 Chicago-Pneumatic Model 650 S/S Drill Rig
Caterpillar 3406 diesel engine - serial number 9HB03011
Near new batteries
750 CFM / 125 PSI CO5 Air Compressor
Dynex main pump & Dynex Head motor
Hydraulic winch
27,500 lb. pullback capability
DTH Hammer oiler
4-hole Funk Box (hydraulic pump drive)
REICHdrill dust collector (can be removed if needed)
Operators cab (can be removed if needed)
6-pod drill pipe carousel
Comes with 3 near-new 25 ft. x 5 in. OD drill pipes
New head adapter
New bit sub (tricone bit not included)
3 Hydraulic jacks
Mounted on a 1978 FCCC (Crane Carrier Company) truck
powered by Caterpillar 3208 diesel engine
13-speed Roadranger transmission
showing only 3934 miles on odometer
We also have used 25 ft. length x 4-1/2 in. OD x 3-1/2 in. API Regular
drill pipe available which can be sold at an extra cost, if needed.
Location : USA
| |
| |
|
|
|
Id: WR693
 Chicago Pneumatic 650 S/S Drilling Rig for Sale
Worldrigs ID: WR693
Model : 650 S/S Drill Rig
Manufacturer : Chicago Pneumatic
Condition : Used
Description :
Chicago-Pneumatic 650 S/S Drill Rig (2)
No Engine currently on deck (but comes with a rebuilt Caterpillar 3406 diesel
engine (heads need torqued down and fuel line needs put back on)
750 CFM / 125 PSI C05 Air Compressor
Bean (FMC) 4-cylinder water injection pump
Dynex main pump & Dynex Head motor
27,500 lb. pullback capability
Gearmatic Hydraulic winch
4-hole Funk Box (hydraulic pump drive)
3 Hydraulic jacks
4 pieces of 25 ft. drill pipe included
Mounted on 1978 CCC (Crane Carrier Company) truck
Powered by Caterpillar 3208 diesel engine,
showing only 4243 miles on odometer
Deck engine and radiator are included but need re-installed
also comes with spare pull down cylinder
Location : USA
| |
| |
|
Id: WR674
 Chicago Pneumatic T670W Drill Rig for Sale
Worldrigs ID: WR674
Model : T670W Drill Rig
Manufacturer : Chicago Pneumatic
Year : 1979
Condition : Used
Description :
979 Chicago Pneumatic T-670W Drill Rig
Loader Lock Carousel
Breakout Wrench
20 ft x 4-1/4” of used Drill Pipe
CAT 343 V6 Diesel Deck Engine (Turbo)
425 cfm / 250 psi Air Compressor
Oil Lube Pump
Bean Water Injection Pump - 1267611
Hydraulic Winch Line
3 Outriggers
Hydraulic Pull Down & Pull Back
Autofeed
18” Table Opening
320 ft of Pipe Trough
7 Rod Carousel
Auto Rod Loader
Complete Part & Service / Repair Manual Hydraulic Jib
Hydraulic Adjustable Jib Arm
Setup for AIR and MUD Drilling
Mounted on G.M.C. 7500 Series
Detroit 6V-53 Diesel Engine
Location : USA
| |
| |
|
|
|
Id: WR214
 Chicago-Pneumatic 650 Drill Rig for Sale
Worldrigs ID: WR214 Model: 650 Drill Rig
Manufacturer: Chicago Pneumatic
Year: 1986
Condition: Used
Description :
1986 Chicago-Pneumatic 650 Drill Rig
GHH 825 cfm / 350 psi Air Compressor
CAT 3406 diesel deck engine
Mounted on Ford truck
diesel engine
Around 1,000 ft of near new drill pipe at extra cost
Location : USA
| |
| |
|
Id: WR694
 Chicago Pneumatic 650 S/S Drilling Rig for Sale
Worldrigs ID: WR694
Model : 650 S/S Drill Rig
Manufacturer : Chicago Pneumatic
Condition : Used
Description :
Chicago-Pneumatic Model 650 S/S Drill Rig
No Engine currently on deck, but 2 spare Caterpillar 3406 diesel
engines are included
- 1 engine is said to have been rebuilt but we have not tested
- 2nd engine has a hole in block but will also be given with drill so
you may salvage other parts from it as needed
750 CFM / 125 PSI C05 Air Compressor
Dynex main pump, Dynex Head motor
Gearmatic Hydraulic winch
27,500 lb. pullback capability
DTH Hammer oiler (lubricator included but needs re-installed)
4-hole Funk Box (hydraulic pump drive)
6-pod drill pipe carousel (needs re-assembled and re-installed)
3 Hydraulic jacks
3 pieces of 25 ft. drill pipe included
Mounted on a 1978 CCC (Crane Carrier Company) truck
powered by Caterpillar 3208 diesel engine - showing only 5136 miles on
odometer
Carrier hood and fender need re-installed, comes with spare on-road fuel tank
Location : USA
| |
| |
|
|
|
Id: WR646
 Chicago Pneumatic 670 Drilling Rig - For sale
Worldrigs ID: WR646
Model : 670 Drill Rig
Manufacturer : Chicago Pneumatic
Year : 1972
Condition : Used
Description :
1972 Chicago Pneumatic 670 Drill Rig
International 510 gas engine (barley runs)
5-speed transmission
CAT 3406 diesel engine
GHH 750 cfm / 300 psi air compressor
Jib & carousel
Includes as a package:
8” hammer w/ 8” bit
6” hammer w/ 6-¼” bit
Jib & carousel
800 ft of 4 inches x 20 ft drill pipe
Location : USA
| |
| |
|
Id: WR883
 Chicago Pneumatic T-700WH Deep Hole Drill Rig & Package - For Sale
Worldrigs ID: WR883
Description :
1981 Chicago Pneumatic T-700WH Deep Hole Drill Rig & Package
900/350 on-board air,
mounted on a tandem axle steer Kenworth carrier -75,000# pull-back,
4-rod carousel,
CAT 3406B deck engine recently replaced (less than 500 hours ago),
rebuilt dual top-head motors and planetaries,
rebuilt rotational pump and fan motor/pump,
new Nylotron head guides,
new winch line
Additional equipment included :
3,200ft 4 1/2" x 30ft drill pipe with tandem axle drill pipe trailer
mounted IR tugger winch,
skid mounted Sullair 900/350 air compressor,
skid mounted 2000 gallon fuel tank,
skid mounted 300 bbl water tank,
skid mounted doghouse,
spare CAT 3406B engine (needs rebuilt),
6" hammer, 12" hammer/stabilizer combo,
12" tri-cone stabilizer,
casing lifters for both threaded and plain-end,
casing slips, break out wrench, J-wrench.
Location : USA
| |
| |
|
|
|
Id: WR471
 Chicago Pneumatic T7000 Top Head Drive Rotary Drill Rig for Sale
Worldrigs ID: WR471 Model : T7000 Drill Rig
Manufacturer : Chicago Pneumatic
Year : 1981
Condition : Used
Description :
1981 Chicago Pneumatic T7000 Top Head Drive Rotary Drill Rig
S/N: S-81906 (The tag is missing)
Caterpiller 3406B diesel engine
GHH 825 cfm / 300 psi Air Compressor
40' ft mast (note: the mast, carousel & auxiliary winch with
jib have been removed and are stored at another location)
4-Hydraulic outriggers
Mounted on a FWD all-wheel drive CCC (Crane Carrier Chassis)
Cummins diesel engine
6-speed transmission
walking beam rear suspension
with fair size 16.5-22.5 front tires and fair size 11.00-20 rear tires
Showing 4,581 hour on the truck chassis
Note: No Rotary Head
Location : USA
| |
| |
|
Id: WR494
 Chicago-Pneumatic 650 Drill Rig for Sale
Worldrigs ID: WR494 Model : 650 Drill Rig
Manufacturer : Chicago Pneumatic
Condition : Used
Description :
Chicago-Pneumatic 650 Drill Rig
CP 450 CFM / 250 PSI Piston Compressor with 750/350(?)
Booster (air clutch needs newdiapragm)
Tiger Tierra Casing Driver
Carousel
Package Includes:
300’ ft of used drill pipe (some need new pins and boxes)
6” and 9” DTH Hammers
6” Tricone button bit
Spare Parts included; main pumps, top head motors, inner cooler, valves for
the compressor, new drive chain for the transfer case
Rig in working order, some oil leaks (packings need replaced).
Mounted on a 1973 International Paystar truck
Location : USA
| |
| |
|
|
|
Id: WR778
 Chicago Pneumatic T650 Drilling Rig - for Sale
Worldrigs ID: WR778
Model : T650 Drill Rig
Manufacturer : Chicago Pneumatic
Condition : Used
Description :
Chicago Pneumatic T650 Drill Rig
Mounted on a 6 x 6 Oshkosh Truck
Unmounted Sullair 750 cfm / 250 psi air compressor (can be put back on)
Modified CP 650 direct drive off of the truck engine
Location : USA
| |
| |
|
Id: WR183
 Chicago Pneumatic RT1800 Drill Rig for Sale
Worldrigs ID: WR183 Model : RT1800 Drill Rig
Manufacturer : Chicago Pneumatic
Year : 1981
Condition : used
Description :
1981 Chicago Pneumatic RT1800 drill rig
Gardner Denver 5-1/2" x 8" Mud Pump
GHH 825 cfm / 250 psi Air Compressor
30' ft Kelly Bar
Myers Water Injection Pump
Hammer Oilier
60,000 lbs Pullback
10,000 lbs winch
10" Retractable Table
Handles Drill Pipe (30' x 4 1/2" x 3 1/2" IF upset joints)
Mounted on a CCC (Crane Carrier Company) Truck
Cummins 855 Diesel Engine (rebuilt in 2003) (Power Drill & Truck)
Sold Separately or as a package all together:
About 1000' ft of drill pipe (30' x 3-1/2" with 3-1/2" IF upset joints) and some 20' ft pipe,
and (5) Drill Collars (30' x 5")
32' ft Custom Air Trailer with pintle hitch & 2 axles & air brakes
1999 GMC 6500 Truck with 6 speed transmission & CAT diesel engine (hauls the air trailer)
Location : USA
| |
| |
|
|
|
Id: WR863
 Chicago-Pneumatic 7000 Top Head Drive Rotary Drilling Rig - For Sale
Worldrigs ID: WR863
Description :
1977 Chicago-Pneumatic 7000 Top Head Drive Rotary Drill Rig - S/N: 97328
Cat 3406-A diesel deck engine
GHH 825-300 air compressor
43 ft hydraulic raise mast
7" diameter 70,000 lbs hydraulic pull back and pull down hydraulic cylinders
8,000 lbs hydraulic winch and hydraulic jib
hydraulic break-out wrench
carousel
table bushings
fold up rear platform
3-hydraulic outriggers
120-volt work lights
Mounted on a 1975 Mack DM600 Truck tandem axle chassis - VIN# DM492S1239
Mack 300 diesel engine
Mack 6 speed lo-hole transmission
equipped with Jacobs engine brake
Mack camelback spring suspension
216" wheelbase
445/65 22.5 front and 11.00-20 rear tires
In fair to good condition
Upper Meter Reads 4,441 Hours & Odometer Reads 60,157 Miles
Location : USA
| |
| |
|
Id: WR879
 Chicago Pneumatic 600 Drilling Rig - For Sale
Worldrigs ID: WR879
Description :
1979 Chicago Pneumatic 600 Drill Rig
Detroit 6V93 Diesel Deck Engine
GHH 600 CFM / 300 PSI Air Compressor
320 ft of 4-1/2" x 20 ft Drill Pipe included
Recent Cooler and Drill Head Rebuilt
Mounted on a 1990 Mack Truck
300 HP Diesel Engine
Location : USA
| |
| |
|
|
|
Id: WR372
 Chicago Pneumatic T650W Drill Rig for Sale
Worldrigs ID: WR372 Model : T650W Drill Rig
Manufacturer : Chicago Pneumatic
Condition : Used
Description :
Chicago Pneumatic T650W Drill Rig
425 CFM / 250 PSI Leroi 256 SD Air Compressor
Diesel Deck Engine
Pipe Rack
Mounted on a Truck
Diesel Engine
Location : USA
| |
| |
or call +65 97768837. 
