| Specifications : |
SEDLAR 160 Drilling Rig for Sale
Hydraulic rig for sale in Europe
1000 hp Self Elevating Drilling Rig for Sale
Description
Rig General Description
I. Rig
Unit name : SEDLAR 160 (Self Elevating Drilling Land Rig 160m.T)
Rig type : Trailer mounted rig
Current location : Spain
Year of construction : 2007
Date of last full inspection : December 2009
Fuel oil consumption, work over per day : 2000 liters per day
Number of joints per trip stands : Super single
II. Storage Facilities
Fuel storage : For seven days of full operations
Water capacity : 40m3
Mud System -
Active : 75 m3
Reserve : 74 m3
Pill tank : 25 m3
Trip tank : 4.7 m3
III. Operating Depth
Max drilling depth with dual string : 5’’ & 3-1/2” drill pipe and 25klb BHA
3000m (10,000ft) : (figure depends on diameter & well configuration)
1. Derrick Set
1.1 Mast
Make : Joseph Paris - France
Height : 69ft (29m)
Nominal hook capacity : 265 000lb at 63ft / 120m tonnes at 19.2m
Casing hook capacity : 353 000lb at 52,5ft / 160m tonnes at 16m
Pipe handling system : Semi – Automated system
1.2 Substructure
Type : Self-elevating trailer
Width x length : Width 26ft (8m) x Length 79ft (24m)
Height & clearance for BOP stack : 16,4ft (5,0m)
Capacity set back (lb) : 490 000lb (220mt)
Static (lb) : Nominal 265 000lb
1.3 Crown Block
Capacity (t) : 160mt
Number of sheaves : 4 sheaves
Sheaves diameter : Cable diameter of 32mm
Groove sheaves for line size : Groove diameter 819mm and 130mm shaft
1.4 Hydraulic Jacks
Dimension : 2 Hydraulics jack of 250mm bore / 9,7m stroke
Load capacity @ max pressure : @320 bars: 160mt capacity at 52,5ft (353 000lbs)
Load capacity @ max pressure : @ 250 bars: 120mt capacity at 63,6ft (265 000lbs)
Fast tripping speed : 0,6 m/s with a hook load below 75mt
Minimal tripping speed : 0,3 m/s with max hook load of 160mt
Breaking system : Hydraulic controlled and fail safe on
Number of drive motors : 2 Hydraulic power pack for full redundancy
Description : 2 x Hydraulic - Each with 475 hp
Total continuous : 950 hp
Equipped with :
2 oil pressure alarms, ton mille monitor, hook load, weight on bit, RPM, torque, stand
pipe pressure, line pull indicator, trip tank, SPM.
2. Rig Floor Equipment
2.1 Top Drive
Type : Foremost Industries
Model : TDS F150t
Stem speed (max continuous) : Max 134 rpm continuous speed
Torque (continuous) : 25 000ft.lb at 103 rpm
Torque (intermittent) : 25 000ft.lb @ max speed
Cooling system : Hydraulic system cooled by air
2.2 Master Bushing
Maximum opening (in) : 37-1/2”
Type : Varco Split / rotating bushing
Model : Varco
2.3 Iron Roughneck
Make : National Oilwell Varco
Model : ST-80
Sizes : 4’’1/4 to 8’’1/2
Make up torque : 60 000ft.Lb
Brake out torque : 80 000ft.Lb
2.4 Drill Pipe Elevators
For OD of drill pipe : 5”
Quantity : 2
Make : Varco MGG
Type : Center latch elevator
Capacity : 250 ton
For OD of drill pipe : 3-1/2”
Quantity : 2 of each
Make : Varco MGG
Type : Center latch elevator
Capacity : 250 ton
2.5 Drill Pipe Slips (Manual)
For OD of drill pipe : 5”
Quantity : 2
Make : Varco
Type : SDXL
For OD of drill pipe offered : 3-1/2”
Quantity : 2
Make : Varco
Type : SDML
2.6 Drill Pipe Slips (Powered)
* For OD of drill pipe offered : 5” and 3 ½”
* Quantity : 1
* Make : Dencon Type SL-1
2.7 Drill Collars Slips
* Quantity : 2
* Make : Varco
* For OD drill collar offered : 8” / 6-1/2”/ 4-3/4”
* Type : DCS-L
2.8 Safety Clamps
* Quantity : 1 of each
* Make : Varco
* Type : MP-R
* Range sizes : 8”, 6-1/2”, 4-3/4” & From 4-1/8” to 2-1/4”
2.9 Drill Pipe And Drill Collar Tongs
* Number of sets : 1 of each
* Make : Varco
* Type : HT 35/ HT55/HT100
* Range sizes : 2-3/8” – 17-1/2”
2.10 Elevator Links
* Number of sets : 1 sets
* Make : Varco
* Type : 250 ton
* Size : 2-3/4”
2.11 Drill Pipe Circulation Heads
* Quantity : 1 of each for 5” & 3-1/2” DP
* Make : WECO 1502
* Type : No swivel type
* Bottom connection : 4 1⁄2 IF & 3 1⁄2 IF
* Top connection : 2” FIG 1502
2.12 Inside BOP
* Quantity : 1 of each 5 “ & 3-1/2”
* Make : Hydrill
* Type : Non return valve
* Working pressure : 10 000psi / 10 000psi
* Connection type : NC 50 & NC38 box x pin
* Nominal od : 6-3/8 / 4-7/8”
3. Mud Circulating System
3.1 Mud Pumps
* Number of pumps : 2 units
* Type : EMSCO Type RS-F1000 slush pump
* Max input power : 1000hp
* Max outlet pressure : 5000psi
* Type of drive : 1 x DETROIT diesel 12V2000 G81
* Continuous rating of drive : 1120bhp at 1800 RPM
* Pump liners : 6’’1/2, 6”, 5” and 4’’1/2
* Rated flow rates for each liner size :
6’’1/2: 2400l/min at 176bar max at 140spm
6”: 1944l/min at 207bar max at 140spm
5”: 1350l/min at 298bar max at 140spm
4-1/2”: 1092l/min at 345bar max at 140spm
* Pulsation dampener : 20gal/5000psi
* Reset relief valve : RRV Retsco
* Pump stroke counter : Electric (Autelec) @ DCR
* Charging pump : Halco 5”x4”x14”
3.2 Mud Pump Suction Lines
* Size of lines : 8”
* Working pressure : LP
3.3 Mud Pump Discharge Lines
* Size of lines : 4”
* Working pressure : 5000psi
* number of lines : 2 (One each)
3.4 Stand Pipe
* Number of stand pipe : 1
* Stand pipe size : 4” ID 3”
* Working pressure (psi) : 5000psi
* Goose neck working pressure : 5000psi
* manifold working pressure : 5000psi
3.5 Rotary Hoses
* Size rotary hoses : 4” API Type D
* Rotary houses size (id) : 3”
* Working pressure (psi) : 5000psi
3.6 Mud Tanks
* Tank no 1 volume : 25m3 (Active)
* Tank no 2 volume : 50m3 (Active)
* Tank no 3 volume : 37m3 (Reserve)
* Tank no 4 volume : 37m3 (Reserve)
* Tank no 5 volume : 4,7m3 (Trip Tank)
* Tank no 6 volume : 25m3 (Pill Tank) With Big bags jib
3.7 Mud Mixing System
* Number of mud mixing pumps : 2
* Type : Centrifugal (6 x 8”)
* Power : Electrical AC explosion proof min. 75 hp motor
3.8 Electrical Mud Mixers
* Quantity : Respectively 3, 2 & 1 (total 6)
* Power motor : 3 x 11Kw, 2 x 0,55Kw & 1 x 1Kw
* Installed place : Active, Reserve & Pill tank
3.9 Bottom Guns
Quantity :
Active (4), Reserve (4) & Pill (2) tank
Low pressure bottom guns (total 10)
3.10 Flow Line Shaker
* Number : 3 units
* Type : SWACO, Mongoose PT Dual-Motion Shaker
* Number of decks : 3
* Screens size available : 230XL, 200XL, 105XL, 165XL, 84XL, 50XL
* Capacity of process not less : 1800gpm (600gpm each)
3.11 Degasser
* Type : SWACO Centrifugal Degasser CD-1400
* Driven by : Centrifugal pump 3”x2”x13”
3.12 Mud Gas Separator
* Type : 3C Metal / Poor Boy Type
3.13 JIB For Big Bags
Type :
Type PRT 2 tonnes from HADEF
Air Operated
4. BOP Well Control Equipment
4.1 Nominal 13 5-8’’ Diverter Stack
* Bag type preventer : Spherical
* Size : 13’’5/8
* Type & brand : Shaffer MGE
* Working pressure (psi) : 5000psi
* Top connection : 13’’5/8 -5kpsi Studded Top
* Bottom connection : 13”5/8 -5kpsi Flange
* Diverter valve : Speciality 8” and 1480psi
4.2 Nominal 11’’ Bop Stack
* Bag type preventer : Yes
* Size : 11"
* Type & brand : Hydrill GK Annular
* Working pressure (psi) : 5000psi
* Top connection : 11” 5kpsi Studded Top
* Top connection size : 11”
* Bottom connection : 11” 5kpsi Flange Bottom
* Bottom connection size : 11”
* Ram type preventer : Cameron Type U
* Size : 11”
* Working pressure (psi) : 5000psi
* Single or double : Double
* Top connection : 11” 5kpsi Flange Top
* Top connection size : 11”
* Bottom connection : 11” 5kpsi Flange Bottom
* Bottom connection size : 11”
* Pipe rams size : 7”, 5”, 4-1/2”, 3-1/2”, 2-3/8” and Variable Bore (2- 7/8 to 5”)
4.3 Nominal 13 5/8” BOP Stack
* Bag type preventer : Yes
* Size : 13 5/8”
* type & brand : Shaffer Annular
* Working pressure (psi) : 5000psi
* Top connection : 13 5/8” 5kpsi Studded Top
* Top connection size : 13 5/8”
* Bottom connection : 13 5/8” 5kpsi Flange Bottom
* Bottom connection size : 13 5/8”
* Ram type preventer : Cameron Type U
* Size : 13 5/8”
* Working pressure (psi) : 5000psi
* Single or double : Single and Double
* Top connection : 13 5/8” 5kpsi Flange Top
* Top connection size : 13 5/8”
* Bottom connection : 13 5/8” 5kpsi Flange Bottom
* Bottom connection size : 13 5/8”
* Pipe rams size : TBD
4.4 Adapter Spools
13-5/8” phase -
* Type : Double studded connector
* Working pressure (psi) : 5000psi / 1000psi / 5000psi
* Top connection : 5Kpsi Studded/ 5Kpsi Studded / 5Kpsi Flange
* Top connection size : 13-5/8”, 13-5/8”, 13-5/8”
* Bottom connection : 2k Studded / 10k Studded / 2k Flange
* Bottom connection size : 13-5/8”, 13-5/8”, 13-5/8”
11” phase -
* Type :
Double Studded connector
* Working pressure (psi) : 5000psi
* Top connection : 11” 5k Studded
* Top connection size : 11”
* Bottom connection : 11” 3k Studded
* Bottom connection size : 11”
4.5 Choke Valve on BOP
* Make and type : Doyles CIW/FC
* Hydraulic operation : 1 x Manual & 1 x Hydraulic
* Size : 3-1/8”
* Working pressure (psi) : 5000psi
4.6 Kill Valve on BOP
* Type : Doyles CIW/FC - 3-1/8” - 5000psi – 2 x Manual
4.7 Check Valve
* Type : Doyles CIW/FC
* Hydraulic Operation : Yes
* Size : 3-1/8”
* Working Pressure : 5000psi
4.8 BOP Control System
* Type : Station BOP central system (E-series)
* Make : Enertex International
* Working pressure (psi) : 3000psi
4.9 Surface Accumulator Unit
* Location on rig layout : Trailer right side
* Type : Six station accumulator unit with low flow alarm
* Make : Enertex
* Number of bottles : 8
* Total bottles capacity : 120 gal (15gal each)
* Bottles working pressure : 3000psi
4.10 Hydraulic Testing Pump
* Type : Portable Testing Unit /30 bar for liquid service
* Model : Proserv Pressure Testing Unit
* Testing pressure (psi) : 5000psi
4.11 Air Pumps
* Type : Bis-sixty air pump 60:1
* Number : Two (2) Air Pumps
* Working pressure : 5000psi
4.12 Driller’s Control Panel
* Type : G-Series pneumatic
* Make : Enertex
4.13 Remote Control Panel
* Type : Pneumatic Dual Remote Control
* Make : Enertex
* Installation site : Between Rig supt & Company Man Office
4.14 Cup Tester
* Type : Type F
* Make : Packard International Cup
* Size :
Casing 48-61Lb/ft (One unit)
Casing 43,5-53,5Lb/ft (One unit)
4.15 Choke Manifold
* Make : Doyles
* Size : 3-1/8”
* Working pressure : 5000psi
* Number of adjustable chokes : 1 of each
* Manual : 3-1/8” 5k Cameron Model H2, 2” Class PU
* Remote : 3-1/16” 10k Swaco, Super Choke, EE
* Remote control panel : Yes
* Type : G-Series hydraulic
* Kill and choke lines from bop to choke Manifold : Independent Hose 3” 5000psi
* Working pressure / inside diameter : 5000psi
4.16 Chicksan Joints
* Quantity : Ten (10) joints
* Make : Best Swivel
* Size : 2”
* Type : Fig 1502
* Working pressure : 10000psi
* Length of each joint : 10ft
4.17 Choke Line
* Quantity : 1 of each
* Make : Independent Hose
* Type : API Flanges at each end
* Size : 3 1/8
* Total length : 35ft
* Working pressure : 5000psi
4.18 Kill Line
* Quantity : 1 of each
* Make : Independent hose
* Type : API Flanges at each end
* Size : 2”
* Working pressure : 5000psi
5. Drilling Equipment
5.1 5” OD Drill Pipe
Total length : 2200m (7200ft)
Grade : S-135
Range : R2 pipe
Weight : 19,5 lb/ft
Class : Premium
Internally plastic coated : Yes
Tool joint od : 6-5/8”
Tool joint id : 2 ¾
Hardfacing type : Arnco 200 XT
Connection type : 4-1/2” IF
5.2 3 ½” OD Drill Pipe
Total length : 2200m (7200ft)
Grade : S-135
Range : R2 pipe
Weight : 13,3 lb/ft
Class : Premium
Internally plastic coated : Yes
Tool joint od : 4-7/8”
Tool joint id : 2 7/16
Hardfacing type : Arnco 200 XT
Connection type : 3 ½ ” if
5.3 5 ” DP Pup Joints
Length : 4 of 15’, 2 of 10’ & 2 of 5’
Grade : S-135
Weight : 19,5 lb/ft
Class : Premium
Internally plastic coated : Yes
Tool joint od : 6-5/8”
Tool joint id : 2 ¾
Connection type : 4-1/2” IF
5.4 3 ½” DP Pup Joints
Length : 4 of 15’, 2 of 10’ & 5 of 5’
Grade : S-135
Weight : 13,3 lb/ft
Class : Premium
Internally plastic coated : Yes
Tool joint od : 4-7/8”
Tool joint id : 2 9/16
Connection type : 3 ½ ” if
5.5 HW Drill Pipe
Quantity of joints : 30 joints / 30 joints
Class : Premium
Nominal size : 5 “ & 3-1/2”
Weight : 50 lb/ft / 26 lb/ft
Length : Range 2 / Range 2
Tool joint od : 6-5/8” / 4-7/8”
Tool joint id : 2 ½ ” / 2 ¼
Connection type : Ping Box NC50 / Ping Box NC38
Hardfacing type : Yes / Yes
5.6 Drill Collars
Quantity of joints : 8 of each
Hardfacing type : Spiral type Grant Prideco H series
Nominal size : 8”, 6-1/2” & 4-3/4”
Length : 30’ each
Drill collar body id : 2-13/16”, 2-13/16”, 2-1/4”
Connection type : 6-5/8” Reg MxF / NC50 MxF /NC 38 MxF
With recess for “zip” elevator : Yes
With recess for slip : Yes
5.7 Float Valve
Quantity : 2, 2, 2, 4 & 4 of each
Make : Baker
Type : 5F-6R / 4R / 2F-3R
Working pressure : 5000psi
Connection type : 2”IFx3”R, 2”IFx3”R,4”Reg GA,4”Reg IF,
5”IFx6”R, 5”IFx6”R
5.8 Bit Subs, Subs, Etc
Bit Subs : 17-1/2”, 12-1/4”, 8-1/2” & 6”
List Of Subs For Working String -
2 of each Cross Over :
4 ½ IF B X 2 7/8 N VAM P
4 ½ IF B X 2 7/8 EU P
4 ½ IF B X 3 ½ EUE P
4 ½ IF P X 3 ½ IF B
4 ½ IF B X 3 ½ N VAM P
4 ½ IF B X 4 ½ EUE P
4 ½ IF B X 4 ½ N VAM P
3 ½ IF B X 2 7/8 N VAM P
3 ½ IF B X 2 7/8 EUE P
3 ½ IF B X 3 ½ N VAM P
3 ½ IF B X 3 ½ EUE P
3 ½ IF B X 4 ½ N VAM P
3 ½ IF B X 4 ½ EUE P
8 of each Lifting Subs -
6 5/8 REG P X 4 ½ IF B
4 ½ IF P X 4 ½ IF B
3 ½ IF P X 3 ½ IF B
5.9 Bit Breakers
Size : 17-1/2”, 12-1/4”, 8-1/2” and 6”
Number : 1 of each
6 Casing Equipment
6.1 Side Door Casing Elevators
Quantity : 1 & 2 of each
Size : 13-3/8”, 9-5/8”, 7”
Make : Wilson casing
Type : WEB
Capacity : 150 ton each
6.2 Casing Slips To Use In CSG Bowl
Quantity : 2 of each
Make : Varco
Type : CSXL
Capacity : For 13-3/8”, 9-5/8”, 7” & 4-1/2”
6.3 Single Joint CSG Elevator
Quantity : 1 of each
Make : Varco Casing
Type : SJL
6.4 Manual Casing Tongs
Quantity : 1 of each
Make : Varco
Type : HT
Capacity : 55/100
Range sizes : 17” to 4”
6.5 Power Tubing Tong
Quantity : 1
Make : Eckel Hydraulic
Type : w/ torque gauge and spring hanger
With jaws for casing : From 4’’½ to 2’’3/8
7 Fishing Equipment
7.1 Overshots
Quantity : 1 of each
Make : Logan
Type : Series 150 Type FS
Overshot od : 1-3/4”, 9-5/8”, 8-5/8”, 8-1/8”, 5-3/4”
7.2 Junk Subs
Quantity : 1 of each
For hole sizes : 12-1/4”, 8-1/2” & 6”
Connection type : 6-5/8” Reg, 4-1/2” Reg & 3-1/2” Reg
7.3 Junk Basket
Quantity : 1 of each
For hole sizes : 12-1/4”, 8-1/2” & 6”
Connection type : 6-5/8”, 4-1/2” & 3-1/2”
7.4 Taper Taps
Quantity : 1 of each
Type : Logan Wickers
Minimun od : 6-1/8” OD / 4-3/4” OD
Maximun od : (4-3/4 – 3-1/4”) / (2-3/16 – 3-11/16”)
Connections : 4-1/2” IF / 3-1/2” IF
8 Instrumentation
8.1 Weight Indicator
Make : Autelec
Type ; Dead line anchors Hydraulic cylinders
8.2 Mud Pump Pressure Gauges
Make : Autelec
Type : Proximity sensor
Proximity sensor : Working Range Pressure
8.3 Rotary Torque Indicator
Make : Autelec
Type : Pressure Box with TD pressure sensor
8.4 Tongue Torque Assembly
Make : Autelec
Type : Digital
8.5 Drilling Parameter Recorder System
Make : Autelec / Data Management Module
Wob : Yes
Stand pipe pressure : Yes
Rop : Yes
Total stroke counter : Yes
Torque : Yes
Rpm : Yes
8.6 Drift Recorders
Number of sets : 1
Make : Totco
Degree ranges from -to : 8-16°
9 Auxiliaries
Fuel tank capacity : 25m3 (2,4mx6mx2m) / 11m3 (2,4mx6mx1m)
Water pump : Two (2) Flygt BS2660MT / DS2640HT
Air dryer : Ingersoll Rand TS3A
Bug blower : 2 units
Air compressor :
Ingersoll Rand MH 55 – Max pressure
10 bars – Flow rate : 8.5 m3 / mn at 10 bars
10 Safety Equipment
10.1 Firefighting Equipment
Extinguishers : One on each module type ABC & CO2
Fire pump : fire pumps – 1 for rig / 1 for camp (type TBA)
Ppe : As required
11. Cabins
Warehouses : Mechanic,Electric, Drilling, HSE + Rubber store
Workshop : Mechanic
Offices :
1 x Drilling supt/Geologist
1 x Rig supt/Radio operator
1 x mechanic/Electrician/Other
1 x HSE/Clinic
1 x Meeting room/Prayer room
1 x Services company room / Toilet unit
12. Drawings
General layout
Bop stack : Annular 13’’ 5/8 & Double rams 11’’
|
