|
|
Id: 9000-340
 National 110UE Drilling Rig -1500 hp - for Sale
Worldrigs ID: WR25 Description
National 110UE 18,000' Drilling Rig
Newly Refurbished, 1500 HP Electric, +/- 18,000’ Capacity drilling rig
Drawworks :
National 110 UE 1500HP Single Drum Drawworks, Lebus Grooved
f/1-3/8” Line, Makeup & Breakout Catheads, with Petron Driller’s
Control Console, Crown-O-Matic. Drawworks is remanufactured
by major machine shop with warranty.
Drawworks Power :
Apollo 752 DC Traction Motor, S/N-7514175, 1000 HP, with Emerson
AB34 10 HP Electric Blower Assembly, S/N-YC10E1B1.
Apollo 752 DC Traction Motor, S/N-7505238, 1000 HP, with Emerson
AB34 10 HP Electric Blower Assembly, S/N-YC10E1B2
Brake :
Rade Tech 88058DS Electric Brake
Derrick :
Skytop 142’H Cantilever Beam Leg Mast, 1,000,000 Lb. Static Hook Load,
Pin-Type, SKYTOP Crown Block w/(6) Crown Sheave Cluster, Crown
Safety Platform, Racking Board, Tong Counterweights, Ladder, Derrick
Climber, Mast Stand, 3-1/2” Standpipe & Manifold. Mast and sub will be
reconditioned and API inspected by Superior Derrick Service. Both mast &
sub were built in 1981 but never put in service until 2006.
Substructure :
Skytop 28’W x 26’H x 72’L Swing-Up Substructure, 1,000,000 Lb. Casing
Load, 600,000 Lb. Setback Capacity w/Rotary Beams, V-Door Ramp, Type
EB Deadline Anchor, Stairs, Safety Rails.
Power Source :
Kato 1050 KW AC Generator, S/N-2782533447, p/b CAT D399 Diesel Engine,
w/Air Starter, Radiator, Gauges, Mounted on 10’W x 30’8”L Covered Skid.
Rebuilt and engines load tested.
Kato 1050 KW AC Generator, p/b CAT D399 Diesel Engine,
S/N-35B066244, w/Air Starter, Radiator, Gauges, Mounted on 10’W 30’8”L
Covered Skid. Rebuilt and engines load tested.
Kato 1050 KW AC Generator p/b CAT D399 Diesel Engine w/Air Starter, Radiator,
Gauges, Mounted on 10’W x 30’8”L Covered Skid. Rebuilt and engines load tested.
SCR Unit :
IDM 4-Bay SCR Unit, S/N-505622, w/9’2”L Porch, Switchgear & Instrumentation to
Control (3) 1050 KW AC Generators, Includes: (1) Brake Control Box, GE E-9000
Line Series Motor Control Center, Mounted in 10’3”W x 29’2”L Temperature-Controlled
House w/(2) Eubank V72-10733 Air Conditioners, S/Ns-KT025145323R &
KT025146323R, (1) Hammond750 KVA Transformer, S/N-DB05J231, (1) Hammond
75 KVA Transformer, S/N-DAJST0DB822, Mounted on 10’3”W x 29’2”L Skid.
Rebuilt and tested.
(4) Shopbuilt 1’W x 9’L Electrical Suitcases
(6) Shopbuilt 3’7”W x 22’9”L Electrical Suitcases w/Grasshopper
Air Package :
(Note : Mounted on Generator Skids)
World Air RVK-40 Air Compressor, S/N-5483, p/b WEG 30 HP Electric Motor, Mounted
on No. 1 Generator Skid
Curtis Air Compressor, S/N-20601, p/b Baldor 20 HP Electric Motor,
S/N-206813260264, w/230-Gallon Air Receiver Tank, Mounted on No. 1 Generator Skid
BEL AIR 3D3HL Air Compressor, S/N-147266, p/b Baldor 20 HP Electric Motor,
S/N-20601260264, w/230-Gallon Air Receiver Tank, Mounted on No. 2 Generator Skid
Pump (Primary) :
LS NOI 3NB1300C(10P130 style) Triplex Mud Pump, S/N-205-002, 1300 HP, w/(3)
6-3/4” x 10” Forged Steel Fluid Ends, Quick-Change Valve Caps & Cylinder Heads,
LS NOI 5000 PSI Pulsation Dampener, S/N-4J28, Double Life 5” x 6” Centrifugal
Charging Pump, S/N-5218, p/b Emerson 50 HP Electric Motor, S/N-C0510190029,
5000 PSI, Pressure Gauge, Mounted on 9’8”W x 30’2”L Skid.
Pump Power :
(2) Apollo 752 DC Traction Motor, S/N-41160046, 1000 HP, w/Emerson AB34 10 HP
Electric Blower Assembly, S/N-YC10E1B
Apollo 752 DC Traction Motor, S/N-7539480, 1000 HP, w/Emerson AB34 10 HP Electric
Blower Assembly, S/N-YC10E1B
Pump (Standby)
LS NOI 3NB1300C (10P130 style)Triplex Mud Pump, S/N-204-030, 1300 HP, w/(3)
6-3/4” x 10” Forged Steel Fluid Ends, Quick-Change Valve Caps & Cylinder Heads, LS
NOI 5000 PSI Pulsation Dampener, S/N-4J4, Double Life 5” x 6” Centrifugal Charging
Pump, S/N-5219, p/b Emerson 50 HP Electric Motor, S/N-C0510190034, 5000 PSI,
Pressure Gauge, Mounted on 9’8”W x 30’2”L Skid.
Pump Power :
(2) Apollo 752 DC Traction Motor, S/N-7538070, 1000 HP, w/Emerson AB34 10 HP
Electric Blower Assembly, S/N-YC10E1B
Apollo 752 DC Traction Motor, S/N-7428792, 1000 HP, w/Emerson AB34 10 HP Electric
Blower Assembly, S/N-YC10E1B
Rotating Equipment :
MUD KING RT275 27-1/2” Rotary Table, S/N-27511, w/Split Master Bushings, p/b
Apollo 752 Traction Motor w/Emerson AB34 10 HP Blower Assembly - Rebuilt.
Mud King 450-Ton Swivel - Rebuilt
5-1/4” x 40’L Hex Kelly
Varco HD Kelly Drive Bushing
International tools kelly spinner - Rebuilt
TIW Upper Kelly Spinner
TIW Lower Kelly Spinner
Traveling Equipment :
Ideco 525-Ton Block/Hook Combination Rebuilt
2-3/4” x 132” Elevator Links
Well Control Equipment :
Hydril GK Type 13 5/8” 5000# Annular Blowout Preventer - Rebuilt
Schaffer LWS Type- 13-5/8” x 5000 PSI DOUBLE Blowout Preventer - Rebuilt
Choke Line: (1) 4-1/16” x 10M Gate Valve, (1) 4-1/16” x 5M HCR Valve
Kill Line: (2) 2-1/16” x 10M Gate Valves, (1) 2-1/16” x 5M Check Valve
CPCPB 40-32 5-Station Closing Unit, S/N-4635, w/(16) 11-Gallon Accumulator Bottles,
Triplex Pump, S/N-05556, p/b Baldor 20 HP Electric Motor, S/N-20502170516, (2) Air
Pumps, S/Ns-205902170516 & 205902170517, Gauges, 8’W x 8’2”L Skid. Pressure tested.
5 - Station remote closing unit, mounted in doghouse
5000 PSI Choke Manifold w/5-Way Cross, (2) 4-1/16” x 10M Gate Valves, (7) 2-1/16” x 10M
Gate Valves, (2) 2-1/16” x 10M Adjustable Chokes, Mounted on 8’W x 14’L Adjustable-Height
Skid.
Rig Houses :
Shopbuilt 7’9’W x 25’1”L Doghouse w/5’L Covered Porch, Knowledge Box, Bench Storage,
Cabinets, Lights, Skidded
Shopbuilt 10’2”W x 33’1”L Change House w/Round Top, Knowledge Box, (24) Lockers, Bench
Storage, Cabinets, Washer, Lights, Skidded
(2) Shopbuilt 8’W x 19’10”L Parts Houses, Each w/Round Top, Parts Bins, Skidded
Mud System :
Shopbuilt 10’W x 9’6”’H x 50’L 543-Barrel Suction Tank w/9’L Covered Porch, (3) Compartments,
(5) Grove Gear 7-1/2 HP Mud Agitators, S/Ns-801759310051, 8017513100 & 80175931105,
Each p/b Marathon 7-1/2 HP Electric Motor, S/Ns-BV74445, BV74457, BV74456, BV74448
& BV74443, Mud Hopper, Caustic Tank, Internal Plumbing, Flat Bottom, Top-Mounted Walkways,
Stairs, Safety Rails, Skidded
MCM 5” x 6” Centrifugal Mixing Pump, S/N-11945, p/b Baldor 50 HP Electric Motor,
S/N-C065180234
MCM 5” x 6” Centrifugal Mixing Pump, S/N-11288, p/b Baldor 50 HP Electric Motor,
S/N-C065180224
Shopbuilt 10’W x 9’6”’H x 50’L 543-Barrel Shaker Tank w/10’W x 9’L Covered Porch, (3) Compartments,
Grove Gear 7-1/2 HP Mud Agitator, S/N-80175931005, p/b Marathon 7-1/2 HP Electric Motor,
S/N-BV74454, Internal Plumbing, Flat Bottom, Top-Mounted Walkways, Stairs, Safety Rails, Skidded
MCM 5” x 6” Centrifugal Desilter Pump, S/N-11915, p/b Marathon 50 HP Electric Motor
MCM 5” x 6” Centrifugal Desander Pump, S/N-11945, p/b Baldor 50 HP Electric Motor,
S/N-C0508110044
Odrill/MCM Linear Motion Shale Shaker - New
OdrillL/MCM Linear Motion Shale Shaker
Double Life Desander, S/N-3159, w/(2) 10” Cones
Double Life Desilter, S/N-3158, w/(8) 2” Cones
Dreco “Deep Pit” Degasser, S/N-3295, p/b Baldor 5 HP Electric Motor
Shopbuilt 10’ W x 9’6”H x 50’ long Mixing Tank. Two 15 hp Agitators. High pressure guns. Pit levelers.
Dump gates. Three Dividers. Oilfield Three Runner skid.
Water / Fuel Tanks :
Shopbuilt 10’2”Dia x 42’3”L 500-Barrel Water Tank, Skidded - New
Baker SPD 2” x 3” Centrifugal Water Pump, S/N-2012, p/b Teco 25 HP Electric Motor, S/N-050501000,
Mounted on Generator Skid No. 3
BAKER 2” x 3” Centrifugal Water Pump, S/N-2017, p/b Teco 25 HP Electric Motor,
S/N-05134600909, Mounted on Generator Skid No. 3
Shopbuilt 8’Dia x 32’3”L 12,141-Gallon Fuel Tank w/(2) SIEMENS Fuel Transfer Pumps, Each p/b Teco 2 HP
Electric Motor, S/Ns-BQ0520600001 & BQ0520600002, w/4’L Covered Porch, Skidded
Murphy 5-Compartment Lubester w/Pumps, Hoses, Reels, Mounted on 6’W x 13’L Skid
Handling Tools :
Varco SSW-10 Pipe Spinners
Type DB 3-1/2” x 10 3/4” Rotary Tongs, S/N-10031M1399 - Rebuilt
5” 350-Ton Drill Pipe Elevators
5” Drill Pipe Slips
6-1/2” Drill Collars Slips
8” Drill Collar Slips
6-1/2” & 8” Safety Clamps
Juling XJF5-35 Air Hoist, S/N-0509-1, 10,000 Lb. Capacity
Juling XJF5-35 Air Hoist, S/N-0509-2, 10,000 Lb. Capacity
5” Mud Bucket
Instrumention :
Petron Weight Indicator, S/N-G1800 (NOTE: Located in Doghouse - Rebuilt
Totco Automatic Driller - Rebuilt
M&F Type D Mud Gauge, S/N-6773 - New
Auxiliary Equipment :
3-1/2” x 65’L Rotary Hose - New
3-1/2” x 12’L Vibrator Hose - New
3-1/2” x 18’L Vibrator Hose - New
Shopbuilt 5’W x 18”H x 60’L Catwalk, 2-Section, Steel Deck
(3) Sets of (6) 18”H x 28’L Shopbuilt Triangular Pipe Racks
Shopbuilt 8’W x 40’2”L Junk Box, Skidded
FIVE STAR Wireline Measuring Device, S/N-XCU081006N4, w/15,000’ of .092 Wireline - New.
1-3/8” Drill Line w/Ingersoll-Rand Air Tugger, S/N-SP051123032, Chain Driven. New drilling line
Rathole & Mousehole
Fluorescent, Mercury-Vapor & High-Pressure Sodium Rig Lights w/Wiring - All new wiring
Miscellaneous Spare Parts, Valves, Fire Extinguishers, Etc.
|  |
| |
|
Id: WR981
 Drilltech T25K2W Drilling Rig - For Sale
Worldrigs ID: WR981
Description :
1987 Drilltech T25K2W Drill Rig
CAT 3406 Diesel Deck Engine (2500 Hours Since Rebuilt)
GHH 825 cfm / 350 psi Air Compressor (1500 Hours Since Rebuilt)
4 Piston Bean Water Injection
Rebuilt Top Head and New Upper Chains in 2023
All Pumps Replaced or New in 2021
New Funk Gear Box in 2021
Used - 600 ft of Driltech style drill rods worn to 4-3/8”
Mounted on a 1987 Ford L8000 Truck - VIN#: FDYW82A8HVA51679
8.7 Ford Diesel Engine
Location : USA
| |
| |
|
Id: WR958
 Atlas Copco CM-780D Blast Hole Drilling Rig - For Sale
Worldrigs ID: WR958
Description :
2007 Atlas Copco CM-780D Blast Hole Drill
Crawler Mounted
Caterpillar C13 Diesel Engine
S/N: G78322D
IR HR2 865 CFM / 350 PSI Air Compressor
Bean 8 GPM Water injection Pump
Hammer lubricator
Thread Greaser
Enclosed Cab
A/C & Heater
Telescoping Boom
Rod Changer
13-1/2" Track Shoes
Set up for (4”O.D. x 13.1ft) drill pipe 21/2Z thread
Service records available for 2018/2019
Location : USA
| |
| |
|
|
|
Id: WR999
 Schramm T64HB Drilling Rig - For Sale
Worldrigs ID: WR999 Description :
1976 Schramm T64HB Drill Rig
Caterpillar 3406 Diesel Deck Engine - rated 425 HP
425 cfm / 250 psi Air Compressor (Rebuilt)
Pipe Rack
Hydraulic Leveling Jacks
Mounted on an International 2000 - Model 40S Truck
DT 8.7 Liter 300HP Diesel Engine
Front Axle: 16000LBS, Rear Axle: 20000LBS
Fuller 15 speed transmission
224,571 Miles
Air Suspension
300 ft of Drill Rod (20ft x 4-1/2") included
Price reduced as of September 2023
Location : Canada
| |
| |
|
Id: WR470
 Drilling Structures 800hp Rig for sale
Worldrigs ID: WR470 General
Trailer mounted (preferred)) or convential rig : Conventional rig
SCR, or D/E : D/E
Rig year of construction or assembly : 1981
Truck trips required to move the rig between locations : 45
Estimated rig up time (days) : 14
Estimated rig down time (days) 14
Heaviest load, widest load, & longest during rig moves : 32ton, 4,2m, 15,55m
Actual current rig status (drilling-idle - etc) & location : Standby, well#12 Manavi
Average fuel consumption for normal rig operations : 3500 LT/24 hours
Average fuel consumption to heat the enclosed areas in cold weather : -15 C 4500 LT/24 hours
Mast, Substructure, Drawworks and Associated Equipment
Mast and Associated Equipment -
Mast (make-type) : Drilling Structures Houston, TX, A.P.I. 4E second edition
Racking platform capacity : 4000m 4 1/2" drill pipe
Racking platform capacity of D.C. & H.W : 160m 8" DC
Derrick complete with monkey, stabbing, and belly boards, safety cages
around ladders (or climbing device), and derrick escape line, derrick
climbing assist line :
Monkey board, derrick escape line, one Airwinches and two cat lines at
racking platform level to aid racking of DC
Substructure and Rig Floor Equipment
Substructure (make-type), built per API standard 4-F : Drilling Structures Houston, TX
Minimum rated setback load capacity : Max. pipe setback capacity 350000 lbs
Minimum rated rotary load capacity : Max. rotary setback load 550000 lbs
Rig floor dimensions : Safe and spacious (5.7m x 8.8m and 15m x 8.8m)
Dog-house : One Doghouse
Drilling console :
Weight indicator, Tong-line Pull indicator, Rotary torque indicator,Pump pressure
indicator, Rotary R.P.m. Gauge, Pump stroke indicator for 2 Pumps.
Rig floor height from ground level : 5.2m
Clear height between Rotary beams and ground level (considering also
the rotating head) : 4.1m
Rotary Table : Gardner-Denver 17 1/2" opening, driven by 800HP, complete
with appropriate master & kelly bushings & insert bowl.
Hexagonal Kelly : 5 1/4", 40ft long.
Spinning Wrench : Foster Model 97
Winches on rig floor : 1 Each: 1,5t pull rating, air, complete with safety guards,
handle brakes
Blocks and Swivel Assembly
Swivel : Continental Emsco Swivel LB-300
Crown Block make & type : 204t capacity,6-42" &1-54", 1 1/8" Sheave
Travelling block make & type Block-Hook combination. Pyramid BJ Unimatic 6250,
300ton. 5-42" Sheaves, 1 1/8" D/L
Hook block make & type : Complete with spring and locking device.
Drawworks Assembly
Drawworks make & model; mechanical driven : Model U 36 A Mid Continent
Drawworks rated input power : 800 hp
Drawworks main & auxiliary brakes : Hydromatic Brake V 80
Make-up & break-out catheads or hydraulic equivalents : Mace-up & break-out catheads
Travelling Block safety device : Crown-o-matic
Crown block safety device : Crown-o-matic
Fast line guide : Wire line turn back's
Drilling Line : 1 1/8", 6*19 IWRC, 65t
Mud Pumps
Mud pump Make & Model : Two duplex Power Slush Pump Model
Mud Pump Performance Requirements :
Max. pressure 2760 PSI(5 1/2" Liner)
Max. rate 790 GPM (7 1/4" Liner)
Mud pumps complete with pulsation dampners, relief valves, stroke counters :
Two Hydrill type K-20 pulsation dampeners, two pressure relief valves,
two stroke counters
Mud pump suction line : Complete with filters.
Mud pump discharge line : 4" ID with 4" - 5000psi mud valves
Rig Floor Mud Manifold
Rig Floor Mud manifold : Kill line outlet, Fill-up/bleed off line outlet, two 2" outlets
complete with hammer lug wing unions type connections
Mud manifold stand pipe : 101,6 mm, 5000psi
Rotary Hose : 3 1/2", 5M
Mud Mix and Storage System
Total system volume : Total system volume 1300 bbls.
Mud tank : Shaker tank -
Compartment: Settling - 172 bbls, Middle - 75bbls, End - 110bbls.
Two shale shakers, agitator, 10" Harrisburg Desander, 8-4" Harrisburg Desilter,
Two Harrisburg centrifugal pumps, Mud guns: 1" x 3" Stationary.
Mud tank : Active -
100 bbls, complete with electric agitator and bottom guns in all compartments.
Mud tank : Treatment -
155 bbls, complete with two agitators and bottom guns.
Mud tank : Reserve - 500 bbls, with two agitators.
Mud slug pit : 56 bbls
Drilling water reserve tank : 80m3 complete with tie in to active system
and transfer pump
Mud Mixing System :
Completemud mixing system comprising one hopper mixers,one filling funnel,
sack-table and centrifugal electric pumps. Piping should be at least 6" with a
minimum velocity in the lines of 10ft/sec. Output of centrifugal pump 10bpm@85psi.
Mud degasser unit (vacuum type) : Drilco Flo-See
Mud/gas separator, atmospheric type vertical separator : One mud gas separator type
poor boy degasser.
Mud return system Including : Bell nipple and flowline
Rig Power & Electrical Systems
Diesel Engine/Generator sets : Two CAT 3408, 340 HP Diesel engines with 250 KWT
LIMA Generatores.
Electrical Safety Devices
Emergency shut down button - diesel engines : On drillers console
Well Control Equipment
BOP control panel :
Koomey Accumulator System. Ser#11242 Basic KOOMEY Accumulator, Unit
Model# ET 25160 38, Koomey Control Manifold Model No GU CKB 6S. Rig Skid and/or
test manifold Model No RT. Koomey Remote Control System Model No MARC 6. 16
W/No 1B16 Junction Box, Fluid Tank Cap. 280 Gals. Date MFD 1/79 Electric Motor
Wired for 460 Volts.207 bars WP automatic pump accumulator unit with control manifold,
one air-driven pump and one 20HP electricalli driven pump.
Double ram preventer : 11", 5000 PSI & 11" 10000 PSI
Annular Preventer : 11", 5000 PSI
Rams for above preventers : Pipe and blind rams, pipe rams for 3 1/2", 4 1/2", 5 1/2".
Kill and Choke Lines
Choke line from BOP stack to choke manifold : One each: Coflexip (protected type)
Choke Manifold
Choke Manifold : 5000 PSI
Choke Manifold outlet points : Three points with 3" boll type valves.
Choke Manifold outlet line running to mud gas separator : 4" Hose, 5000psi
Choke Manifold outlet line running to shale shaker : Line thru Gas buster To shale shaker
Flare line: One line
Choke Manifold power choke control panel : Power Choke unit, complete with pump stroke
counter & totalizer, power choke opening indicator, digital pressure guages for SP &
Casing pressures.
Drill String Safey Equipment
Lower Kelly cocks: For 4 1/2" and 3 1/2" DP
Lower Kelly cocks location: Maintained on rig floor
Driller's Console Instruments
Driller's console: Complete with weight indicator, digital SP pressure gauge (0-6000 PSI), pump stroke counter & totaliser (for each pump), Rotary RPM, Rotary Torque, Tong Torque
Miscellaneous Safety Equipment
Derrickman escape line: Jeronimo escape line
Eye washing stations : 3 each, located at: mud check area of pits, mud hopper, rig floor.
Emergency shower stations : One shower near mud hopper
Portable emergency battery lights : Six each
Wind socks : One, on dog house
Rig Intercommunication System
Portable radios : 3 each, overhead type, explosion proof
Miscellaneous
Electric welding machines : One - Electrical
Torch oxygen-acetylene or oxygen-propane welding sets : One set
Steam cleaning machine : One steamer machine
Air Compressors : Quinsey Model 390
Mud saver bucket for drill pipe (size) : For 4 1/2" & 3 1/2" DP
Wireline unit on rig floor for deviation surveys :
Electric Drive, complete with: Depth Measurement mechanism, 8,000' of
0.092 wire with swivel/sheave, sinker bar, appropriate fittings.
Tocto Standard inclinometre (for Inc) : 0-8 degree
Drillpipe Wiper Rubbers : For 4 1/2" &3 1/2"DP
| |
| |
|
Id: WR910
 Drilling Rig - For Sale-1.jpg) Ingersoll-Rand T4BH (Blast Hole) Drilling Rig - For Sale
Worldrigs ID: WR910
Description :
2004 Ingersoll-Rand T4BH (Blast Hole) Drill Rig - S/N: 7851
IR HR2 900 cfm / 350 psi Air Compressor
Cummins QSX15 Diesel Deck Engine
2 - Motor Spur Gear Power Head (Rebuilt)
5 Rod Carousel
2 - Cylinder Bean Water Injection Pump
Hammer Oiler
Drillers Cab
Hydraulic Leveling Jacks
Mounted on a CCC (Crane Carrier Company) - VIN#: 1CYDCE4854T046335
CAT C-10 Diesel Engine - S/N: MBJ04202
Note: Can be converted to T4W and set up for water well drilling at an extra cost
13,395 Frame hours
Location : USA
| |
| |
|
|
|
Id: WR950
 Schramm T64HB Drilling Rig - For Sale
Worldrigs ID: WR950 Description :
Schramm T64HB Drill Rig
425 cfm / 250 psi Air Compressor
Detroit 8V71 Diesel Deck Engine
4” Centrifugal mud pump
Pipe Rack
Hydraulic Leveling Jacks
Mounted on a 1989 International Paystar Truck
Diesel Engine
Note: drill pipe in pictures is not included
Location : USA
| |
| |
|
Id: WR924
 Gus Pech G-48 Super George Drilling Rig - For Sale
Worldrigs ID: WR924
Description :
1997 Gus Pech G-48 Super George Drill Rig
Mounted in a 1997 Mack RB688S Drill Rig
Tandem Axle
Mack 350-HP Diesel Engine
Camel Back Suspension
Bars to 96ft
Caterpillar 3208 Diesel Engine
4-Point Stabilizers
Day Cab
Maxitorque 13-speed Transmission
Double Pump Unit
Tilt Mast
Average Tires
Location : USA
| |
| |
|
Id: WR255
 SEDLAR 160 - Self Elevating Drilling Land Rig for Sale
Worldrigs ID: WR255 Description
Rig General Description
I. Rig
Unit name : SEDLAR 160 (Self Elevating Drilling Land Rig 160m.T)
Rig type : Trailer mounted rig
Current location : Spain
Year of construction : 2007
Date of last full inspection : December 2009
Fuel oil consumption, work over per day : 2000 liters per day
Number of joints per trip stands : Super single
II. Storage Facilities
Fuel storage : For seven days of full operations
Water capacity : 40m3
Mud System -
Active : 75 m3
Reserve : 74 m3
Pill tank : 25 m3
Trip tank : 4.7 m3
III. Operating Depth
Max drilling depth with dual string : 5’’ & 3-1/2” drill pipe and 25klb BHA
3000m (10,000ft) : (figure depends on diameter & well configuration)
1. Derrick Set
1.1 Mast
Make : Joseph Paris - France
Height : 69ft (29m)
Nominal hook capacity : 265 000lb at 63ft / 120m tonnes at 19.2m
Casing hook capacity : 353 000lb at 52,5ft / 160m tonnes at 16m
Pipe handling system : Semi – Automated system
1.2 Substructure
Type : Self-elevating trailer
Width x length : Width 26ft (8m) x Length 79ft (24m)
Height & clearance for BOP stack : 16,4ft (5,0m)
Capacity set back (lb) : 490 000lb (220mt)
Static (lb) : Nominal 265 000lb
1.3 Crown Block
Capacity (t) : 160mt
Number of sheaves : 4 sheaves
Sheaves diameter : Cable diameter of 32mm
Groove sheaves for line size : Groove diameter 819mm and 130mm shaft
1.4 Hydraulic Jacks
Dimension : 2 Hydraulics jack of 250mm bore / 9,7m stroke
Load capacity @ max pressure : @320 bars: 160mt capacity at 52,5ft (353 000lbs)
Load capacity @ max pressure : @ 250 bars: 120mt capacity at 63,6ft (265 000lbs)
Fast tripping speed : 0,6 m/s with a hook load below 75mt
Minimal tripping speed : 0,3 m/s with max hook load of 160mt
Breaking system : Hydraulic controlled and fail safe on
Number of drive motors : 2 Hydraulic power pack for full redundancy
Description : 2 x Hydraulic - Each with 475 hp
Total continuous : 950 hp
Equipped with :
2 oil pressure alarms, ton mille monitor, hook load, weight on bit, RPM, torque, stand
pipe pressure, line pull indicator, trip tank, SPM.
2. Rig Floor Equipment
2.1 Top Drive
Type : Foremost Industries
Model : TDS F150t
Stem speed (max continuous) : Max 134 rpm continuous speed
Torque (continuous) : 25 000ft.lb at 103 rpm
Torque (intermittent) : 25 000ft.lb @ max speed
Cooling system : Hydraulic system cooled by air
2.2 Master Bushing
Maximum opening (in) : 37-1/2”
Type : Varco Split / rotating bushing
Model : Varco
2.3 Iron Roughneck
Make : National Oilwell Varco
Model : ST-80
Sizes : 4’’1/4 to 8’’1/2
Make up torque : 60 000ft.Lb
Brake out torque : 80 000ft.Lb
2.4 Drill Pipe Elevators
For OD of drill pipe : 5”
Quantity : 2
Make : Varco MGG
Type : Center latch elevator
Capacity : 250 ton
For OD of drill pipe : 3-1/2”
Quantity : 2 of each
Make : Varco MGG
Type : Center latch elevator
Capacity : 250 ton
2.5 Drill Pipe Slips (Manual)
For OD of drill pipe : 5”
Quantity : 2
Make : Varco
Type : SDXL
For OD of drill pipe offered : 3-1/2”
Quantity : 2
Make : Varco
Type : SDML
2.6 Drill Pipe Slips (Powered)
* For OD of drill pipe offered : 5” and 3 ½”
* Quantity : 1
* Make : Dencon Type SL-1
2.7 Drill Collars Slips
* Quantity : 2
* Make : Varco
* For OD drill collar offered : 8” / 6-1/2”/ 4-3/4”
* Type : DCS-L
2.8 Safety Clamps
* Quantity : 1 of each
* Make : Varco
* Type : MP-R
* Range sizes : 8”, 6-1/2”, 4-3/4” & From 4-1/8” to 2-1/4”
2.9 Drill Pipe And Drill Collar Tongs
* Number of sets : 1 of each
* Make : Varco
* Type : HT 35/ HT55/HT100
* Range sizes : 2-3/8” – 17-1/2”
2.10 Elevator Links
* Number of sets : 1 sets
* Make : Varco
* Type : 250 ton
* Size : 2-3/4”
2.11 Drill Pipe Circulation Heads
* Quantity : 1 of each for 5” & 3-1/2” DP
* Make : WECO 1502
* Type : No swivel type
* Bottom connection : 4 1⁄2 IF & 3 1⁄2 IF
* Top connection : 2” FIG 1502
2.12 Inside BOP
* Quantity : 1 of each 5 “ & 3-1/2”
* Make : Hydrill
* Type : Non return valve
* Working pressure : 10 000psi / 10 000psi
* Connection type : NC 50 & NC38 box x pin
* Nominal od : 6-3/8 / 4-7/8”
3. Mud Circulating System
3.1 Mud Pumps
* Number of pumps : 2 units
* Type : EMSCO Type RS-F1000 slush pump
* Max input power : 1000hp
* Max outlet pressure : 5000psi
* Type of drive : 1 x DETROIT diesel 12V2000 G81
* Continuous rating of drive : 1120bhp at 1800 RPM
* Pump liners : 6’’1/2, 6”, 5” and 4’’1/2
* Rated flow rates for each liner size :
6’’1/2: 2400l/min at 176bar max at 140spm
6”: 1944l/min at 207bar max at 140spm
5”: 1350l/min at 298bar max at 140spm
4-1/2”: 1092l/min at 345bar max at 140spm
* Pulsation dampener : 20gal/5000psi
* Reset relief valve : RRV Retsco
* Pump stroke counter : Electric (Autelec) @ DCR
* Charging pump : Halco 5”x4”x14”
3.2 Mud Pump Suction Lines
* Size of lines : 8”
* Working pressure : LP
3.3 Mud Pump Discharge Lines
* Size of lines : 4”
* Working pressure : 5000psi
* number of lines : 2 (One each)
3.4 Stand Pipe
* Number of stand pipe : 1
* Stand pipe size : 4” ID 3”
* Working pressure (psi) : 5000psi
* Goose neck working pressure : 5000psi
* manifold working pressure : 5000psi
3.5 Rotary Hoses
* Size rotary hoses : 4” API Type D
* Rotary houses size (id) : 3”
* Working pressure (psi) : 5000psi
3.6 Mud Tanks
* Tank no 1 volume : 25m3 (Active)
* Tank no 2 volume : 50m3 (Active)
* Tank no 3 volume : 37m3 (Reserve)
* Tank no 4 volume : 37m3 (Reserve)
* Tank no 5 volume : 4,7m3 (Trip Tank)
* Tank no 6 volume : 25m3 (Pill Tank) With Big bags jib
3.7 Mud Mixing System
* Number of mud mixing pumps : 2
* Type : Centrifugal (6 x 8”)
* Power : Electrical AC explosion proof min. 75 hp motor
3.8 Electrical Mud Mixers
* Quantity : Respectively 3, 2 & 1 (total 6)
* Power motor : 3 x 11Kw, 2 x 0,55Kw & 1 x 1Kw
* Installed place : Active, Reserve & Pill tank
3.9 Bottom Guns
Quantity :
Active (4), Reserve (4) & Pill (2) tank
Low pressure bottom guns (total 10)
3.10 Flow Line Shaker
* Number : 3 units
* Type : SWACO, Mongoose PT Dual-Motion Shaker
* Number of decks : 3
* Screens size available : 230XL, 200XL, 105XL, 165XL, 84XL, 50XL
* Capacity of process not less : 1800gpm (600gpm each)
3.11 Degasser
* Type : SWACO Centrifugal Degasser CD-1400
* Driven by : Centrifugal pump 3”x2”x13”
3.12 Mud Gas Separator
* Type : 3C Metal / Poor Boy Type
3.13 JIB For Big Bags
Type :
Type PRT 2 tonnes from HADEF
Air Operated
4. BOP Well Control Equipment
4.1 Nominal 13 5-8’’ Diverter Stack
* Bag type preventer : Spherical
* Size : 13’’5/8
* Type & brand : Shaffer MGE
* Working pressure (psi) : 5000psi
* Top connection : 13’’5/8 -5kpsi Studded Top
* Bottom connection : 13”5/8 -5kpsi Flange
* Diverter valve : Speciality 8” and 1480psi
4.2 Nominal 11’’ Bop Stack
* Bag type preventer : Yes
* Size : 11"
* Type & brand : Hydrill GK Annular
* Working pressure (psi) : 5000psi
* Top connection : 11” 5kpsi Studded Top
* Top connection size : 11”
* Bottom connection : 11” 5kpsi Flange Bottom
* Bottom connection size : 11”
* Ram type preventer : Cameron Type U
* Size : 11”
* Working pressure (psi) : 5000psi
* Single or double : Double
* Top connection : 11” 5kpsi Flange Top
* Top connection size : 11”
* Bottom connection : 11” 5kpsi Flange Bottom
* Bottom connection size : 11”
* Pipe rams size : 7”, 5”, 4-1/2”, 3-1/2”, 2-3/8” and Variable Bore (2- 7/8 to 5”)
4.3 Nominal 13 5/8” BOP Stack
* Bag type preventer : Yes
* Size : 13 5/8”
* type & brand : Shaffer Annular
* Working pressure (psi) : 5000psi
* Top connection : 13 5/8” 5kpsi Studded Top
* Top connection size : 13 5/8”
* Bottom connection : 13 5/8” 5kpsi Flange Bottom
* Bottom connection size : 13 5/8”
* Ram type preventer : Cameron Type U
* Size : 13 5/8”
* Working pressure (psi) : 5000psi
* Single or double : Single and Double
* Top connection : 13 5/8” 5kpsi Flange Top
* Top connection size : 13 5/8”
* Bottom connection : 13 5/8” 5kpsi Flange Bottom
* Bottom connection size : 13 5/8”
* Pipe rams size : TBD
4.4 Adapter Spools
13-5/8” phase -
* Type : Double studded connector
* Working pressure (psi) : 5000psi / 1000psi / 5000psi
* Top connection : 5Kpsi Studded/ 5Kpsi Studded / 5Kpsi Flange
* Top connection size : 13-5/8”, 13-5/8”, 13-5/8”
* Bottom connection : 2k Studded / 10k Studded / 2k Flange
* Bottom connection size : 13-5/8”, 13-5/8”, 13-5/8”
11” phase -
* Type :
Double Studded connector
* Working pressure (psi) : 5000psi
* Top connection : 11” 5k Studded
* Top connection size : 11”
* Bottom connection : 11” 3k Studded
* Bottom connection size : 11”
4.5 Choke Valve on BOP
* Make and type : Doyles CIW/FC
* Hydraulic operation : 1 x Manual & 1 x Hydraulic
* Size : 3-1/8”
* Working pressure (psi) : 5000psi
4.6 Kill Valve on BOP
* Type : Doyles CIW/FC - 3-1/8” - 5000psi – 2 x Manual
4.7 Check Valve
* Type : Doyles CIW/FC
* Hydraulic Operation : Yes
* Size : 3-1/8”
* Working Pressure : 5000psi
4.8 BOP Control System
* Type : Station BOP central system (E-series)
* Make : Enertex International
* Working pressure (psi) : 3000psi
4.9 Surface Accumulator Unit
* Location on rig layout : Trailer right side
* Type : Six station accumulator unit with low flow alarm
* Make : Enertex
* Number of bottles : 8
* Total bottles capacity : 120 gal (15gal each)
* Bottles working pressure : 3000psi
4.10 Hydraulic Testing Pump
* Type : Portable Testing Unit /30 bar for liquid service
* Model : Proserv Pressure Testing Unit
* Testing pressure (psi) : 5000psi
4.11 Air Pumps
* Type : Bis-sixty air pump 60:1
* Number : Two (2) Air Pumps
* Working pressure : 5000psi
4.12 Driller’s Control Panel
* Type : G-Series pneumatic
* Make : Enertex
4.13 Remote Control Panel
* Type : Pneumatic Dual Remote Control
* Make : Enertex
* Installation site : Between Rig supt & Company Man Office
4.14 Cup Tester
* Type : Type F
* Make : Packard International Cup
* Size :
Casing 48-61Lb/ft (One unit)
Casing 43,5-53,5Lb/ft (One unit)
4.15 Choke Manifold
* Make : Doyles
* Size : 3-1/8”
* Working pressure : 5000psi
* Number of adjustable chokes : 1 of each
* Manual : 3-1/8” 5k Cameron Model H2, 2” Class PU
* Remote : 3-1/16” 10k Swaco, Super Choke, EE
* Remote control panel : Yes
* Type : G-Series hydraulic
* Kill and choke lines from bop to choke Manifold : Independent Hose 3” 5000psi
* Working pressure / inside diameter : 5000psi
4.16 Chicksan Joints
* Quantity : Ten (10) joints
* Make : Best Swivel
* Size : 2”
* Type : Fig 1502
* Working pressure : 10000psi
* Length of each joint : 10ft
4.17 Choke Line
* Quantity : 1 of each
* Make : Independent Hose
* Type : API Flanges at each end
* Size : 3 1/8
* Total length : 35ft
* Working pressure : 5000psi
4.18 Kill Line
* Quantity : 1 of each
* Make : Independent hose
* Type : API Flanges at each end
* Size : 2”
* Working pressure : 5000psi
5. Drilling Equipment
5.1 5” OD Drill Pipe
Total length : 2200m (7200ft)
Grade : S-135
Range : R2 pipe
Weight : 19,5 lb/ft
Class : Premium
Internally plastic coated : Yes
Tool joint od : 6-5/8”
Tool joint id : 2 ¾
Hardfacing type : Arnco 200 XT
Connection type : 4-1/2” IF
5.2 3 ½” OD Drill Pipe
Total length : 2200m (7200ft)
Grade : S-135
Range : R2 pipe
Weight : 13,3 lb/ft
Class : Premium
Internally plastic coated : Yes
Tool joint od : 4-7/8”
Tool joint id : 2 7/16
Hardfacing type : Arnco 200 XT
Connection type : 3 ½ ” if
5.3 5 ” DP Pup Joints
Length : 4 of 15’, 2 of 10’ & 2 of 5’
Grade : S-135
Weight : 19,5 lb/ft
Class : Premium
Internally plastic coated : Yes
Tool joint od : 6-5/8”
Tool joint id : 2 ¾
Connection type : 4-1/2” IF
5.4 3 ½” DP Pup Joints
Length : 4 of 15’, 2 of 10’ & 5 of 5’
Grade : S-135
Weight : 13,3 lb/ft
Class : Premium
Internally plastic coated : Yes
Tool joint od : 4-7/8”
Tool joint id : 2 9/16
Connection type : 3 ½ ” if
5.5 HW Drill Pipe
Quantity of joints : 30 joints / 30 joints
Class : Premium
Nominal size : 5 “ & 3-1/2”
Weight : 50 lb/ft / 26 lb/ft
Length : Range 2 / Range 2
Tool joint od : 6-5/8” / 4-7/8”
Tool joint id : 2 ½ ” / 2 ¼
Connection type : Ping Box NC50 / Ping Box NC38
Hardfacing type : Yes / Yes
5.6 Drill Collars
Quantity of joints : 8 of each
Hardfacing type : Spiral type Grant Prideco H series
Nominal size : 8”, 6-1/2” & 4-3/4”
Length : 30’ each
Drill collar body id : 2-13/16”, 2-13/16”, 2-1/4”
Connection type : 6-5/8” Reg MxF / NC50 MxF /NC 38 MxF
With recess for “zip” elevator : Yes
With recess for slip : Yes
5.7 Float Valve
Quantity : 2, 2, 2, 4 & 4 of each
Make : Baker
Type : 5F-6R / 4R / 2F-3R
Working pressure : 5000psi
Connection type : 2”IFx3”R, 2”IFx3”R,4”Reg GA,4”Reg IF,
5”IFx6”R, 5”IFx6”R
5.8 Bit Subs, Subs, Etc
Bit Subs : 17-1/2”, 12-1/4”, 8-1/2” & 6”
List Of Subs For Working String -
2 of each Cross Over :
4 ½ IF B X 2 7/8 N VAM P
4 ½ IF B X 2 7/8 EU P
4 ½ IF B X 3 ½ EUE P
4 ½ IF P X 3 ½ IF B
4 ½ IF B X 3 ½ N VAM P
4 ½ IF B X 4 ½ EUE P
4 ½ IF B X 4 ½ N VAM P
3 ½ IF B X 2 7/8 N VAM P
3 ½ IF B X 2 7/8 EUE P
3 ½ IF B X 3 ½ N VAM P
3 ½ IF B X 3 ½ EUE P
3 ½ IF B X 4 ½ N VAM P
3 ½ IF B X 4 ½ EUE P
8 of each Lifting Subs -
6 5/8 REG P X 4 ½ IF B
4 ½ IF P X 4 ½ IF B
3 ½ IF P X 3 ½ IF B
5.9 Bit Breakers
Size : 17-1/2”, 12-1/4”, 8-1/2” and 6”
Number : 1 of each
6 Casing Equipment
6.1 Side Door Casing Elevators
Quantity : 1 & 2 of each
Size : 13-3/8”, 9-5/8”, 7”
Make : Wilson casing
Type : WEB
Capacity : 150 ton each
6.2 Casing Slips To Use In CSG Bowl
Quantity : 2 of each
Make : Varco
Type : CSXL
Capacity : For 13-3/8”, 9-5/8”, 7” & 4-1/2”
6.3 Single Joint CSG Elevator
Quantity : 1 of each
Make : Varco Casing
Type : SJL
6.4 Manual Casing Tongs
Quantity : 1 of each
Make : Varco
Type : HT
Capacity : 55/100
Range sizes : 17” to 4”
6.5 Power Tubing Tong
Quantity : 1
Make : Eckel Hydraulic
Type : w/ torque gauge and spring hanger
With jaws for casing : From 4’’½ to 2’’3/8
7 Fishing Equipment
7.1 Overshots
Quantity : 1 of each
Make : Logan
Type : Series 150 Type FS
Overshot od : 1-3/4”, 9-5/8”, 8-5/8”, 8-1/8”, 5-3/4”
7.2 Junk Subs
Quantity : 1 of each
For hole sizes : 12-1/4”, 8-1/2” & 6”
Connection type : 6-5/8” Reg, 4-1/2” Reg & 3-1/2” Reg
7.3 Junk Basket
Quantity : 1 of each
For hole sizes : 12-1/4”, 8-1/2” & 6”
Connection type : 6-5/8”, 4-1/2” & 3-1/2”
7.4 Taper Taps
Quantity : 1 of each
Type : Logan Wickers
Minimun od : 6-1/8” OD / 4-3/4” OD
Maximun od : (4-3/4 – 3-1/4”) / (2-3/16 – 3-11/16”)
Connections : 4-1/2” IF / 3-1/2” IF
8 Instrumentation
8.1 Weight Indicator
Make : Autelec
Type ; Dead line anchors Hydraulic cylinders
8.2 Mud Pump Pressure Gauges
Make : Autelec
Type : Proximity sensor
Proximity sensor : Working Range Pressure
8.3 Rotary Torque Indicator
Make : Autelec
Type : Pressure Box with TD pressure sensor
8.4 Tongue Torque Assembly
Make : Autelec
Type : Digital
8.5 Drilling Parameter Recorder System
Make : Autelec / Data Management Module
Wob : Yes
Stand pipe pressure : Yes
Rop : Yes
Total stroke counter : Yes
Torque : Yes
Rpm : Yes
8.6 Drift Recorders
Number of sets : 1
Make : Totco
Degree ranges from -to : 8-16°
9 Auxiliaries
Fuel tank capacity : 25m3 (2,4mx6mx2m) / 11m3 (2,4mx6mx1m)
Water pump : Two (2) Flygt BS2660MT / DS2640HT
Air dryer : Ingersoll Rand TS3A
Bug blower : 2 units
Air compressor :
Ingersoll Rand MH 55 – Max pressure
10 bars – Flow rate : 8.5 m3 / mn at 10 bars
10 Safety Equipment
10.1 Firefighting Equipment
Extinguishers : One on each module type ABC & CO2
Fire pump : fire pumps – 1 for rig / 1 for camp (type TBA)
Ppe : As required
11. Cabins
Warehouses : Mechanic,Electric, Drilling, HSE + Rubber store
Workshop : Mechanic
Offices :
1 x Drilling supt/Geologist
1 x Rig supt/Radio operator
1 x mechanic/Electrician/Other
1 x HSE/Clinic
1 x Meeting room/Prayer room
1 x Services company room / Toilet unit
12. Drawings
General layout
Bop stack : Annular 13’’ 5/8 & Double rams 11’’
| |
| |
|
|
|
Id: WR834
 Wilson 42 - 110 Double Trailer Mounted Rig for Sale
Worldrigs ID: WR834
General Description :
Make : Wilson
Model : 42
Est. Drilling Depth : 8,500ft
Est. Rig Move Loads : 21
Rated HP : 800
Mast :
Height : 110ft
SHL Load Capacity : 300,000 Ibs.
Mast Racking Capacity : 8.500 ft
Substructure :
Style : Tee Style
Height : 12.00 ft
Clear Height : 10 ft
Casing Capacity : 300,000lbs
Drawworks :
Make : Wilson
Power Rating : HP 800
Input Power : Cat 3306
Brake Type : Drum
Drilling Line Size : 11/8"
Auxillary Brake : Hydromatic
Rotary Table :
Make : Garner Denver
Max Load Rating : 250,000 Ton
Power Generation :
Engines :
2 Cat 3406
Generators
DC - Mechanical Rig
Mud System :
Mud Pumps :
#1 Bomco Triplex
Model F800
Powered By : Cat 398
Pressure Rating : 3500 psi
Mud Pumps :
#2 Ellis Williams Duplex
Model 600 HP 16"
Powered By : Cat 379
Pressure Rating : 2000 psi
Active Mud : 900 Bbls.
Shale Shakers : 1 x 4 ft x 4 ft
Desander : N/A
Desilter : N/A
Well Control :
Annular : Hydrill 3000 psi
Double Ram : N/A
Choke Manifold : N/A
BOP Closing Unit :
Lonney 3 station
closing unit
Location : USA
| |
| |
|
Id: WR1033
 Continental EMSCO Drilling Rig - For Sale
Worldrigs ID: WR1033
Description :
Drawworks
Manufacturer : Continental EMSCO
Model : C-1
Power : 1500-HP
Motors : (2) 800-HP DC Traction Motors
Serial Number : N/A (Asset DW009)
Hours : N/A
Generator Sets
3 X Generators - Catipillar 3512B
SCR House
Configuration : 3x4
Mast
Manufacturer : IRI
Type : 136ft Telescoping Mast
Capacity : 750,000-LB Hook Load
Features : Accommodates 350-Ton Top Drive, IDM Crown, Hydraulic
Lift Cylinders, Geronimo Line, and Mast Dolly
Substructure
Manufacturer : IRI
Type : 22ft Hydraulically Telescoping Substructure
Capacity : 750,000-LB Rotary Load, 400,000-LB Simultaneous Setback
Features : Integrated Drainage System, (2) Braden Floor Winches
Rotary
Manufacturer : EMSCO
Model : Type 27-1/2’’ Rotary
Drive : Independently driven by (1) Hydraulic Haglund Motor
Blowout Preventer (BOP)
Configuration :
(1) 11’’ 10M Shaffer Type Double Ram BOP
(1) 11’’ 10M Shaffer Type Single Ram BOP
(1) 11’’ 5M Shaffer Type Annular
(1) KPM Koomey 6 Station Accumulator, Model T15160-3, S/N 2430, API 16E
Mud Pumps
2 X Mud Pumps - FB1300 CONTINENTAIL EMSCO
Mud System
Total Active Capacity : 848 Barrels
Components :
(2) Covered 424-Barrel Tanks with Round Bottoms and Electric Agitators,
each containing (2) 5x6x75-HP Centrifugal Pumps, Remote Hopper Skid
(1) Mud Processing Skid, Hydraulically Raised, with (3) Brandt King
Cobra Shakers, Brandt DG-10 Degasser, Brandt 16 Cone Desilter
(1) Trip Tank Skid, 106-Barrel Capacity, with 2x3x25-HP Centrifugal Pump
Suction Tank : 424-Barrel Capacity, with 2 each 6x5x14 Centrifugal Pumps,
includes 100-Barrel Slug Tank
Intermediate Tank : 424-Barrel Total Capacity, with 3 separate tanks
at 141-Barrels each, 2 each 6x5x14 Centrifugal Pumps
Top Drive
1 X 350 T Top Drive Canrig
Overhead String
Configuration : 400-Ton Six Sheave Block, with a 12 Line String, 1 3/8" Line
Driller Controls
Type : Drillers Cabin Skid
Features : Varco Electronic Driller and Block Control System, Block Speed
Controls, JoystickControlled Drawworks Speed, Touch Screen and Manual
Control of EDRILL and SCR
Walking System
Details : N/A
Auxiliary Equipment
Automatic Catwalk : Forum, S/N 35SP0108187AC89
Wireline Unit : Five Star Rig with 25,000ft of .092 Wireline
Motorized Drill Line Spool
Meeting and Change House Combo Skid
Hydraulic Power Unit Skid with Centrifugal Pumps and Reservoir
Pipe and Kelly Spinner : Hydraulic (Hawk, Spinmaster, Model 550-H)
Fuel Tank : 12,000 Gallons, Double Wall, Skidded with Pump
Water Tank Skid with Centrifugal Pumps
Location : USA
| |
| |
|
Id: WR1017
 Drilling Rig for Sale-1.webp "Derex 1340-16 DR (Dual Rotary) Drilling Rig - For Sale") Derex 1340-16 DR (Dual Rotary) Drilling Rig - For Sale
Worldrigs ID: WR1017
Description :
Derex 1340-16 DR (Dual Rotary) Drill Rig
Truck
Peterbilt 520
Paccar 13 Litre.
Allison 6 speed automatic
Air ride
Transfer Case
Namco (oilfield quality)
Safe Shift
Hydraulic System
Bosch Rexroth plus gear pump
Top Head
Variable torque and RPM with 2” thru-hole
0-125 rpm @ 3,500-lbf
Lower drive
Variable torque and RPM with 10” thru-hole
0-23 rpm @ 20,000-lbf
Diverter
Simple seal design with 4” NPT discharge
to control cuttings.
Derrick & Feed System
13ft top head stroke (handles 10ft x 3" OD drill pipe)
40,000-lbs pullback
20,000-lbs pulldown
100 FPM
Derrick slide/ dump
4ft Derrick slide for angles up to 45°
Main Winch
Manual jib
2,500 lb.
Remote on helpers side for winch
Control Panel
Straight hydraulic controls (no electrics to fail)
Marine grade electric switches (for lights)
Murphy engine monitor display
Twin platforms
Leveling Jacks
Four 36” stroke independently controlled
Night Lights
6 LED night lights
Toolboxes
30”x 18” x 18”
Overall Dimensions
Length: 24ft 11”
Width: 8ft 6”
Derrick up height: 24ft 6” – 28ft 6” with Derrick slide
Derrick down height: 11ft
Water Injection
9-GPM FMC injection pump
Gross Weight
36,000lbs - 38,000lbs
Casing
Diameter 4", 5" & 6" (with 8" & 10" option for surface casing)
Pre-Order Drill from EWDAdditional Options
4 – 6 Month Leadtime from Date Ordered
Sand Line Winch
1,500ft sand line
Mud Pump
3x2x13 centrifugal 300 gpm/300 psi
Centerline piston 150 gpm/600 psi
Air Compressor
Vanair / Sullair 900cfm / 350psi
Line Oiler
Many oilers available
Water InjectionDrill Pipe Packages
18 gpm FMC injection pump
Wire Feeder and Box
Hydraulic or Gas Welders
Location : USA
| |
| |
|
|
|
Id: WR583
 1200hp SCR Fast Desert Moving Rig for sale
Worldrigs ID: WR583
General
Rig Type or Model : Fast Desert Moving Rig
Year Built : September 2013
Operating Capabilities
Maximum Static Hook Load (lbs) : 650,000
Maximum Setback Load (lbs) : 490,000
Maximum Rotary Load (lbs) : 650,000
Mast
Make/type : Complete Drilling Solutions LLC
Height - ft : 142 ft Drillfloor to Water Table
Width of base - (ft x ft) : 30 x 8
Width of top - (ft x ft) : 6.5 x 6.5
Static hook load - (lbs) : 650,000
With rated set-back - (lbs) : 290,000
Max rated hook load for 10 lines to travelling block (lbs) : 650,000
Substructure (Desert Big Wheel Package)
Make/type : Complete Drilling Solutions LLC
Height -(ft) : Height of drillfloor : 25
Static setback capacity - (lbs) : Max rated setback : 290,000
Rotary Capacity - (lbs) : 650,000
Drawworks
Make/type : American Block 1500E
Rated capacity - HP : 1500
Input power continuous - HP : GE752 DC Motors 2 (750HP each)
Auxiliary brake : Johnson Caliper
Travelling Block
Make/type : American Block
Rated capacity - lbs : 700,000
No. of sheaves : 5
Drilling Line
Size - inches : 1 3/8”. 6x9 EEIP,RRL/IWRC.
Make/Type : 6x9 EEIP,RRL/IWRC
Rotary table
Make/type : American Block
Drive: (independent or driven from drawworks) : GE 752
- Motor HP (if independent) : 500
Maximum opening - inches : 37.5”
Top Drive
Make & Type : Bentec TD350
Electric or hydraulic : Electric
Rated capacity - lbs : 700,000
Prime Movers (Skids)
Quantity : 4
Make : Caterpillar
Type : 3512C
Continuous output power available HP each engine : 1476
AC- Generator
Quantity : 4
Make : Caterpillar
Type : SR4B
Continuous output power available HP each generator : 1401 Electric HP
Output ratings :
- kVa : 1492 kVa
- kW : 1045 kW
- Volts : 600 V
SCR System (Skid)
Number of SCR bays : 4
Make : Omron / IDS
Rig Service Air System
Air Compressors -
Quantity : 2
Make : Sullivan Palaket
Model : 40DG
Emergency Power
Quantity : 1
Make : Caterpillar
Model : C-15
Iron Roughneck
Make/Type : WR80 Wrangler Roughneck
Pipe handling range (inches) : 2-7/8” – 10”
Capacity : 80,000 Ft-lbs
BOP Annular
Quantity : 1
Make : Rongsheng
Size (inch) : 13-5/8 5K
WP (PSI) : 5000 PSI
BOP Ram Type Preventer
Quantity : 1
Make : Rongsheng
Type : Single Ram BOP
Single/double : Single
Size (inch) : 13 5/8"
WP (PSI) : 5000
BOP Ram Type Preventer
Quantity : 1
Make : Rongsheng
Type : Double Ram BOP
Single/double : Double
Size (inch) : 13 5/8"
WP (PSI) : 5000
BOP Accumulator Unit
Make : Top Oilfield
Reservoir capacity liter (gal) : 534
No. of stations : 8
No. of bottles/banks installed : 24
Total bottle capacity liter (gal) : 360
Bottle working pressure (psi) : 3000
Choke Manifold
Make : Idtec
Size inch 3-1/8"
Working Pressure (psi) : 5,000
Mud Pumps (Skids)
Quantity : 2
Make : HHF
Model : 1600
Power rating / pump (HP) : 1600
Mud pump driven by motors : no./type 2Nos/DC Electrical
Continuous power rating of each motor : HP : 800Hp
Mud Tanks (Skids)
Quantity : 5
Total capacity: bbls : 2000 BBL
Shale Shaker
Quantity : 3
Make : NOV
Type : King Cobra Venom
Desander
Make / type : Brandt / SRS-2
Cones :
- Quantity : 2
- Type : Hydro Cyclone
- Diameter : 12"
Desilter
Make / type : Brandt / SE-16
Cones :
- Quantity : 16
- Type : Urethane Hydrocyclone
- Diameter : 4"
Vacuum Degasser
Make : NOV Brandt
Type : Vaco-Flo 500
Maximum capacity : 500 GPM
Camp
Main Camp POB : 87
Fly Camp POB : 10
| |
| |
|
Id: WR929
 Schramm T64HB Drilling Rig - For Sale
Worldrigs ID: WR929 Description :
Schramm T64HB Drill Rig - S/N: T64HB-479
425 cfm / 250 psi air compressor
Detroit 8V71N Diesel Deck Engine
Two piston Bean water injection pump
2022 rebuilt top head with Western mud swivel
260 ft of 4-1/2" drill pipe (20ft x 4-1/2")
Two used 6" DTH Hammers
Pipe Rack
Mounted on a 1989 International Truck
DT466 Diesel Engine with 8LL speed transmission and power divider
Location : USA
| |
| |
|
Id: WR1064
 Ingersoll-Rand T3W Drilling Rig - For Sale
Worldrigs ID: WR1064
Description :
1990 Ingersoll-Rand T3W Drill Rig
Powered by a Cummins NTA 855 diesel deck engine (0 Hours Since Rebuilt)
IR HR2 825 cfm / 350 psi Air Compressor
Table is Rebuilt
New Gears & Bearings in Transfer Case/Gear Box
Many New Hydraulic Hoses
7-Rod Carousel Set Up for 4-1/2" X 20ft Rods (No Rods Included)
Repacked Table Slide Cylinder
4-Cylinder Bean Water Injection Pump
Hammer Oiler
Mounted on a 1990 Ford L9000 Truck
Cummins L10 Diesel Engine
Eaton Fuller RoadRanger transmission
167,176 Miles Showing on Meter
Location : USA
| |
| |
|
|
|
Id: WR1018
 Ardco K10 4X4 Drilling Rig - For Sale
Worldrigs ID: WR1018
Description :
1974 Ardco K10 4X4 Drill Rig
4X4 Carrier S/N: K420
Detroit 4-53T diesel engine (locked up does not run)
Eaton FS5005A 5 speed transmission
Winch on front
Drill is a predecessor to the C1000
Gear water/ grout pump
Large water tank
23.1-26 tires
Ardco top drive
Draw works is chain and sprocket drive hydraulic motor
Location : USA
| |
| |
|
Id: WR942
 Bucyrus Erie 22W Series II Cable Tool Rig - For Sale
Worldrigs ID: WR942 Description :
Bucyrus Erie 22W Series II Cable Tool Rig
Mounted on 1989 International S1800
4x4 Truck
New Cable
New Drill Line
Basic Tooling Included (6" & 8" Bits)
Location : USA
| |
| |
|
Id: WR809
 Oilwell E2000 Drilling Rig for Sale
Worldrigs ID: WR809
Description :
Drawworks : Oilwell E2000, low low rated 711,000#, single line pull,
w/10 lines, driven by (2) GE 752 DC motors, Wichita 336 air
operated/water cooled disc brake,
1 3/8” wire rope 6x19 IWRC.
Prime Power : Omron/SCR System, 3 generator bays, 4 SCR bays,
(3) Caterpillar 3512B w/Kato 1365 KW gen sets.
Auxiliary: cold start air system, primary rig air supply,
floor hoisting systems
Mast/Substructure : DSI 142ft 1,000,000# hook load, slingshot design
27ft RBC, 24.1ft RKB, 600,000# set back, Crown Block 6-60” Sheaves
1 3/8” groove, Fastline 1-60” 1 3/8” groove, hydraulic jack skidding system.
Top Drive – Traveling Block – Pipe Handling : Varco TDS11SA VF AC 500 Ton,
Continental Emsco 500 Ton Block, SJ Petro 27 ½” rotary table,
drawworks driven,
Mud Pumps : (2) Weatherford MP-16, 1600HP Triplex, 5000#psi driven
by (2) each, GE 752 DC motors.
Mud System : (3) tank system, 1200 bbl active capacity with 150 bbl TT,
tandem WFSI linear shale shakers, (8) NOV Max 2000 10HP mud agitators,
derrick desander (2) 12” cones with 6x8 centrifugal driven by 100 hp
motor, Derrick (12) 4” cones with 6x8 centrifugal driven by 100 hp
motor, Derrick Vaccu flow 1200 degasser and 48 x 20 gas buster.
BOP Equipment : 13 5/8” 5000# annular, 13 5/8” 5000# double ram,
Church energy 3000 psi accumulator, 180 gal, 6 station with remote,
4 1/16” 10M x 3 1/16” 10M choke manifold.
Fuel tank : 18000 gal
Water tank : 500 bbl
Auxiliary Equipment : Deadline Anchor, Weight indicator, pump SPM and PSI,
top drive control house, SCR system controls and MU/BO torque, manual tongs,
elevators, slips and clamps.
Location : USA
| |
| |
|
|
|
Id: WR965
 Schramm T64HB Drilling Rig - For Sale
Worldrigs ID: WR965
Description :
1978 Schramm T64HB Drill Rig
Sullair 750 cfm / 350 psi Air Compressor
Detroit 8V92T Diesel Deck Engine
Bean Water Injection Pump
Hammer Oiler
4 Rod Carousel
200 ft of Drill Rod Included
Pipe Rack
Hydraulic Leveling Jacks
Mounted on a 1991 Ford L8000 Truck - VIN #1FDZY82A2MVA23661
Ford Diesel 7.8L Engine
8LL Transmission
Location : USA
| |
| |
|
Id: WR905
 Schramm T500XD Trailer Mounted Drilling Rig for Sale
Worldrigs ID: WR905 Rig Specifications
Mast Unit
The T500XD is a trailer mounted portable land rig designed to API 4F, 7K
and 8C standards. Dual MTU V2000 diesel engines provide power to the
hydraulic system for drilling operations.
The trailer mounted Telemast
system consists of fewer loads and offers rapid set-up and deployment.
Automated pipe handling, slip actuation and breakout systems set this
machine apart from conventional oilfield equipment. Our Half-Triple concept
is designed to utilize Range 3 drill pipe for increased drilling efficiency and
quick trip times.
The mast unit is mounted on a 4 axle trailer with tandem tag axle and
includes hydraulic components necessary to transmit power to the feed,
rotation and auxiliary functions. Quick coupled hoses transmit the hydraulic
supply from the Power Unit to the rig's Mast Unit.
Telescoping construction permits long head travel and working height, yet
short overall length in the transport position. Equipped with a 30" (762 mm)
cylinder operated slide, the mast is free-standing, all pullback loads are
directed into the floor, not the rig frame. The mast is anchored to the rig floor
via locking pins.
Feed System - The top head is raised and lowered by hydraulic traverse
cylinders through 2-7/16" (63 mm) OD wire rope (370 Tons Nominal Breaking
Strength per strand) and 77" PD Nylatron sheaves. As the tophead is raised,
the inner mast section extends by a ratio of 1:2 until it reaches its fully
extended position at 56' of head travel.
Top Head Travel : 56' (17.07m)
Hookload : 500,000 lbs. Actual (227,227 kg)
Hoist Speed (Both Engines) :
0 - 130,000 lbs. @ 136 fpm (regen),
101,000 lbs. - 285,000 lbs. @ 106 fpm,
286,000 lbs. - 305,000 lbs. 100 fpm,
306,000 lbs. - 419,000 lbs. @ 76 fpm
420,000 lbs. - 500,000 lbs. @ 64 fpm
Pulldown Capacity : 80,000 lb (36.363 kg)
Pulldown Speed: 0 - 180 fpm loaded, 0 - 200 fpm free head (no load)
Mini Lube System - A multi-point systemis provided to simplify librication
of drill components. Provides centralized grease fitting locations for top head,
crown, jib boom.
Top Drive Details
The hydraulic top drive is powered by a radial piston motor and is mounted to
a tilting slabback to facilitate pipe handling functions via the LoadSafe. A
floating sub is provided to extend the life of threads by removing feed cylinder
and pipe weight forces from threads while making and breaking tool joints.
Casing lifting eyes are slabback mounted to work in conjunction with
commercially available elevator links (not included). The top drive includes a
rotation lock and rebound prevention circuitry for use when directional
drilling. An in-line mud saver valve is mounted in the top drive spindle.
Connection at top drive swivel is 3".
Top Drive
Horsepower: 950
Rotation Speed: 0- 140 RPM
Rotation Torque: Up to 35,000 ft/lbs
Swivel: 3" cartridge style
Fluid Pressure Rating: 5000 psi
Air/Mud Fluid Lines - A 4" stand pipe and traveling hose is mast mounted
and includes 1502 class hammer unions for 5000 psi operation.
Main Winch - A hydraulically powered winch is mounted to the side of the
mast for utility lifting operations. The winch is a planetary type with
overrunning clutch, hydraulic brake valve and spring applied hydraulic
release brake. The winch operates independently of the other drilling
functions. Winch is reeved over a hydraulic jib boom which centers the line
over the center of the borehole.
Model: Braden PD12C
Drum Capacity: 547 ft (167 m) of 1/2" cable (12.7 mm)
Bare Drum Pull: 9,600 lb (4,354 kg)
Bare Drum Speed: 151 fpm (46.0 mpm)
150 ft Drum Pull: 8,700 lb (3,946 kg)
150 ft Drum Speed: 165 fpm (50.3 mpm)
Cable Supplied : 150 ft (46 m) of 1/2" cable
(12.7 mm) HSLR (high strength low rotation) cable.
Explosion proof lighting is provided for nighttime operations. Lighting is 240V
and is routed through an AC distribution panel and is fed from customer
supplied generators:
(3) 400W Metal Halide units on mast crown
(3) 60W Fluorescent units on RH side of mast
Transport Dimensions : Trailer Load 1
Length : 59'
Weight : 10'
Height : 13'6"
Est. Weight : 150,000 including the tandem tag dolly
Power Unit
The three axle trailer mounted unit includes the engine packages and
hydraulic power systems. Four outriggers are supplied to provide a stable
platform for the power trailer. Quick coupled hoses transmit the hydraulic
supply to the rig's Mast Unit.
Power : 2 x MTU 12V-2000TA DDEC Tier 2, 760 bhp (567 kw) @ 1,800 rpm
w/ electric start, includes (2) two 220 gal fuel tanks, diesel air shut down
system and silencer style muffler with heat wrap on exhaust components.
Battery shut-off switch is included.
Cooling : 2 x Two core, side by side package, 130°F (54.4°C) ambient rating,
with 60" hydraulically driven fan.
Hydraulic System
Each engine is directly coupled to a pump drive gearbox
to power its hydraulic power system. To obtain full system performance, both
engines must be operated at 1800 rpm. However, when drilling conditions
permit, one engine can be operated for fuel savings and to provide
maintenance capability without stopping the drilling process. Each engine
has an identical hydraulic system so either unit can be run with the same
performance. The hydraulic system includes a 1000 gallon tank with full
return oil filtrations. All pumps are protected by suction line strainers and all
hydraulic circuits are protected by relief valves and oil cooler system.
Walkway platforms are provided for access to hydraulic tank during
maintenance operations.
Hydraulic System
Pumps : Each engine powers (9) pumps. (8) piston and (1) one gear type
Filters : (18) twin element 10-micron replaceable elements with magnetic
particle strainers on return ports. High pressure 10-micron elements are
located on the power unit, mast unit and LoadSafe
Tank Capacity : 1,000 gal. Magnetic strainers and shut-off valves on all
suction ports
Electric Heating : (10) 2,000W elements are provided in the hydraulic tank
Water Injection, Bean 35 gpm
A fixed displacement gear pump hydraulically drives the triplex piston pump
for coring and grouting. RPM adjustment is achieved through use of a flow
control valve and includes a gauge to monitor discharge pressure.
Pump Model : FMC Bean W1122BCD
Maximum Flow: 35 gpm (132.5 lpm) @ 1,000 psig (69 bar)
Tool Lubricator, Piston Pump
An air operated piston pump provides "rock drill" oil for DTH operations.
Lubricator is activated and controlled from the operator's station.
Oil Flow : 0 - 5 g/hr (0 -18.9 l/hr)
Max Pressure: 1,000 psi (69 bar)
Reservoir Capacity: 18.1 gal (68.5 l)
Air Manifold - A manifold is provided for air drilling operations. The system
included a hydraulically actuated valve for the main air control and drill string
vents. Includes connections for DTH lubricator and water injections supplies.
Safety Equipment - (4) Four fire extinguisher and (4) four emergency stop
buttons are provided. One of each is located on all 4 corners of the power
unit.
Tool Box - A lockable tool box is located on the right hand side of the rig.
Capacity - 9 cu ft (.25 cu m).
Transport Dimensions : Trailer Load 2
Length : 49'
Width : 10'
Height : 12'
Est. Weight: 85,000 lbs
Sub Base
The sub base is a cantilever design which offers a stable platform and
compact footprint and is a multi-piece package consisting of 5 transport
loads. The sub base includes a walking system which allows the rig to be
accurately position over the conductor hole and provides quick moves from
hole to hole while operating on pad drill sites. The walking system also
allows for re-leveling of the machine if required. The sub structure set-up
and walking systems are operated by a radio control module. Includes
staircases, walkways and railings as required.
Floor Height : 22'
Clearance : 19' under table bushing
Ground Pressure :
Dead Load : 26 psi
Live Load : 57 psi
Walking, Mast Down : 41 psi
Walking Mast Up : 56 psi
HPU for Sub Base is provided with both manual and radio remote controls :
Diesel Engine - 4-cylinder Perkins
Hydraulic System : Single fixed volume pump
Hydraulic Tank - 750 gal. with (3) 2,500W in-tank heaters
Walking System
The walking system consists of 4 hydraulically operated pad systems which
are located at each corner of the parallel lift sections. Lift cylinders raise the
machine 6" off of the ground and slide cylinders translate the machine 12" in
any direction in 5 degree increments. Walking Speed is 30 fph.
Transport Dimensions : Misc. Loads 4 - 7
Rig Floor and Control Room - The rig floor and control room are mounted on
a three axle trailer assembly that is integrated to the sub base during rig up
operations. The rig floor contains 37-1/2" false table adapter and a 27-1/2"
Master Bushing. The hydraulic roughneck is floor mounted and provides
make-up and breakout of tubulars up to 9-1/2" OD. A hydraulic slip lifter is
provided. Slips are provided for the following :
6-1/2" Collar
8" Collar
4-1/2" Drill Pipe
5-1/2" Casing
9-5/8" Casing
13-3/8" Casing
Power Breakout
The arm swings beneath the top head by a hydraulically powered geared
actuator. The lower jaws grab and hold the lower joint while the upper jaws
grab and rotate the upper joint to make or break the connection. Unit's
height is adjustable by 24" to allow for variances in the landed height of the
drill string. 2 sets of jaw dies are required to cover the full diameter range of
this unit. 8 x 3528-0011 dies are required for clamping diameters under 4-
1/2". Torque is adjustable in both the make and break directions and is
monitored via a hydraulic pressure gauge.
Range : 4-1/2" - 9-5/8" diameter
Clamping Force : Adjustable to 61,500 lbs @ 3000 p
Break/Make Torque : 60,000 ft/lbs @ 3500 psi
Main Deck Lighting :
(18) Metal Halide units on sub base
for the driller and LoadSafe operator. All rig and LoadSafe controls are within
easy reach of the operators. The control room is positioned to provide good
visibility of the rig floor and camera systems provide the operators with views
of the area around the LoadSafe and BOP. Accommodations are provided
for third party instrumentation packages.
Monitors : (3) 15" touch screen type
Controls : (2) control positions. (1) each for driller and LoadSafe operator.
Driller has (2) screens, (3) multi-function joysticks and additional control
switches. The LoadSafe operator has (1) screen and (2) multi-function
joysticks.
Seating : (2) fully adjustable swiveling chairs
Lighting : (2) 120V 60W fluorescent fixtures
Electrical Accessory Circuits: (10) duplex outlets, 80 amps total accessory
supply
Heating : air handler, 24,000 btu
Cooling : air handler, 11,000 btu
Power Requirement : 100 amp, 240V AC Single Phase. Routed through a
distribution panel.
The control room is equipped with hardware for wireless remote connectivity
which allows for monitoring of rig system from a remote location.
Transport Dimensions : Trailer Load 8
Length : 53'
Width : 10'
Height : 13'6"
Est. Weight : 85,000 lbs
LoadSafe
The LoadSafe automated pipe handling system is skid mounted and provides
hands-free pipe handling for drill pipe, drill collars and casing. The LoadSafe
lifts tubulars from the horizontal position into alignment with tilting top head
and advances forward or slides back to allow easy interface with the top drive
spindle and will pass 24" casing. Built-in holding clamp allows for make-up or
break-out of tool joints from top drive spindle.
Two (2) pipe arms per side are provided with indexing systems insure that
one pipe is loaded at a time. Arms are positioned to allow the use of Range
2 or Range 3 tubulars.
Arm Length: 129" per side.
Only one set of jaws I required to cover the full range of tubular diameters
(4" -24"). The jaws are simply moved to one of 4 locations on the clamp
arms to accommodate 4 separate diameter ranges.
Diameter Range 1: 4" - 10"
Diameter Range 2: 10" - 14"
Diameter Range 3: 14" - 20"
Diameter Range 4: 20" - 24"
Six (6) hydraulic outriggers are provided to level the machine for stable
operation.
Capacity: Up to Range 3
Lift: Up to 10,000 lbs
Average Trip Time: 1,000 fph
Transport Dimensions : Skid Load 3
Length : 53'
Width : 9'
Height : 6'
Est. Weight : 55,000 lbs
BOP Carraige
BOP Carriage is designed to interface with the customers supplied BOP
transport and skid system. A trolley mounted hoist lifts BOP and rolls it into
position over the borehole. A twin beam track system is mounted to the
bottom of the rig floor during initial rig-up. This system includes a 15 ton
chain hoist.
Interface Connections
Includes (18) hydraulic hoses and (3) electrical cord sets required to connect
the Power Unit to the Mast Unit and the LoadSafe.
Paint Standard Colors
Rig Mast Trailer Unit, Sub Base and LoadSafe are painted Schramm Red.
Rig mast and control room are painted white. Mast crown, top drive and
railinngs are painted safety yellow. Two part polyurethane enamel. Sherwin
Williams Polane G+.
Rig Performance Parameters
TBD prior to order acceptance.
Start-up and Initial Testing
Drill rig components will be built in West Chester, PA, USA for deployment to
Alpha Hunter Drilling LLC rig-up yard for integration, set-up and start-up
testing. Schramm will be responsible for functional and initial testing in West
Chester and start-up testing of the rig components listed in the Scope of
Supply at the Alpha Hunter yard in PA, WV or OH (TBD) once the drilling
package is assembled. Alpha Hunter Drilling LLC will be responsible for the
components it supplies.
Horizontal Well Testing
Schramm service technicians and engineers will be on-site during the drilling
of two (2) horizontal wells by Alpha Hunter Drilling personnel in the PA, WV
or OH location of their choosing. Alpha Hunter Drilling LLC will be
responsible for the rig operation.
Training and Field Service Support
Schramm will train Alpha Hunter Drilling crews in the operation and
maintenance of the drilling rig and will be either on-site or available on a 24/7
basis during the first 6 months after delivery.
Other Considerations
It is understood that the T500XD is a prototype drilling rig, and as such, may
require additional testing, extra time for set-up, trouble shooting and field
modifications not typically associated with a production model. Alpha Hunter
Drilling will cooperate and coordinate with Schramm personnel to facilitate
testing and repairs as may be required. Schramm personnel can have
access to the rig when and where appropriate and may bring visitors to either
aid in the repairs or maintenance, or for the purpose of demonstration to
potential customers. Prototype specifications are subject to change and will
be mutually agreed to prior to implementation and may affect final price or
delivery.
| |
| |
|
Id: WR941
 CME 45 Auger Drilling Rig - For Sale
Worldrigs ID: WR941 Description :
1978 CME 45 Drilling Rig Truck - Serial: 123884
Ford 4 Cylinder Gas Engine
Hours : 358
Auto Hammer
2 winch lines
22ft 4" auger sections
5ft 8" auger sections
23ft 5ft boring rod extensions
8" rock bit
4" rock bit
8" auger bit
Mounted on a 1997 Ford F450 Super Duty - VIN: 1FDLF47F8VEB32264
Miles : 235,967 on odometer
7.3L Power Stroke Diesel Engine
Manual 5 Speed Transmission
Suspension : Spring
Brakes : Hydraulic
GVWR : 15,000 lbs
Wheelbase : 161" & Tire Size: 235/85R16
Location : USA
| |
| |
|
|
|
Id: 9000-487
 Service King 1000 HP Drilling Rig for Sale
Worldrigs ID: WR703
Description :
Crown, (4) Sheave McKissick, 1 ¼”,
Date : 1/ 2012,
SHL : 450,000#
S/N: DK504, Cluster Model : 744-1, 1 1/8” Line, 36” Sheaves,
Fast Line Model : 741-1, 1 1/8” Line, 42”, 40 Tons,
Sand Line Model : 741-1, 1.12” Line, 30” Sheave, 40 Tons
Dead Line Anchor Model : 741-1, 1 1/8” Line, 30” Sheave
Carrier, (5) Axel / Trailer Mount, Model 1000,
SK#: 395T, Gross Weight:, 177,900 Lbs.,
Date: 3/2012, VIN: 1S90TDD85CL976333, (1) Sand Line Reel
(1) Electric Drive Hydraulic Pump,
(2) Oil Saver Hydraulic Filters
Engine # 1, Detroit 2010 Model, 14.0 Litre,
Allison Transmission, S/N: 06R1049132
Engine # 2, Detroit 2010 Model, 14.0 Litre,
Allison Transmission, S/N: 06R1049335
(1) Hydraulic Tank – 350 Gallons
Drawworks, Model:
46 x 10, S/N: DW 2387, Transmission,
Model: 1000, S/N: 5962350
S/N: 5962688, Power Drive Gear Box: 2.47 x 1,
Dual Actuated Air Band Brake, Hydraulic Drum Brake,
Air Actuated Crown Saver, (2) Hydraulic Cat
Heads – Make Brake, (1) Drillers Console
Mast, Model:
117ft, SHL 450,000#, S/N: DK 504,
(3) Hydraulic Raising Cylinders
Built in Top Drive Torque Track, Kelly Hose, Stand Pipe 5000 PSI
with 5000 PSI Type D MSF Mud Gauge S/N: 41814, (3) 5000 PSI
Oteco Shut Off Vales, (2) 250 Ton Bails – 79” Long,
Finger Board – (22) Fingers, (1) Sentry Block / Hook
Combo Model SI-BH-250, 36” Sheave Size Line 1 ¼”, S/N: 07054,
Date: 2007, (2) Air Hoist Lines, Fully Rigged for Safety Cable,
Number of Raising Cylinders = Number of Extensions
Mud Pits :
(2) Pit System – 950 BBL
Shaker Pit (2) Compartments, (2) Swaco Mongoose Shakers,
S/N: PF 2664, S/N: PF 2663, (1) Mongoose Mud Cleaner with
Desander Model: 2-12, S/N: 21963, S/N: 4500732 / Desilter,
Model: 6T4, S/N: 23043, (1) 5 Star 6 x 5 x 14 Cent Pump p/b
50 HP Electric motor
Suction Pit, Full Set of Pit Lights, (2) Caustic Barrels,
(4) 10 HP Agitators (4) Compartments, (2) Prime Mud Movers –
Mission Magnum 6 x 5 x 14 ea p/b 50 HP elec motors
Water Tank :
500 BBL, (2) 25HP Mission Water Transfer Pumps x 4RS,
(2) Compartment Chemical Pit
Gas Buster, Swaco, Model: 2011, 4ft x 10ft, 6” Outlets,
6” Inlets, S/N: MGS-M-118 Skidded
Choke Manifold, (6) 4 x 5M, MGV – HECI, (1) 2 x 5M, MGV – HECI,
(1) 2 x 5M Manual Choke – HECI, 3 Way Watermelon
Pill Pit, (1) Five Star 6 x 5 x 14 Cent Pump p/b 50HP
elec motor w/(1) Hopper
Mud Pump #1, SLF 1300, Engine: Cat 399B PCTA, Date: 12/23/2011,
S/N: 35B06278 Torque Converter, Oil Works, Model: C-300-100,
Type E, S/N: 1600, Five Star Charge Pump, 6 x 5 x 14 p/b 50HP
Electric Motor –, (1) 5000PSI Pulsation Dampener, (1) 5000PSI
Emergency Pop Off – Odrill, (2) 5000PSI Gate Valve - Oteco
(3) SLF 1300 Modules
(1) Mud Pump Center Skid with Frogs, Miscellaneous Basket,
Rig Mats (Table Mats)
Mud Pump #2, SLF 1300, S/N: KMI 01, Engine: Cat 399 PCTA,
Date: 05/ 2011, S/N: 35B4092, Torque Converter, Oil Works,
Model: C-300-100, Type E, S/N: 1600, Five Star Charge Pump,
6 x 5 x 14 p/b 50HP Electric Motor –, (1) 5000PSI Pulsation
Dampener, (1) 5000PSI Emergency Pop Off – Odrill, (2) 5000PSI
Gate Valve – Oteco (3) SLF 1300 Modules
(1) Top Dog House with Tools, (2) BJ Elevators, (2) Tongs,
(3) Slips, (2) Drill Pipe Slips, (4) Mud Wipers, (4) Sets
of Pit Stairs, Spare Tong Heads, (1) Hydraulic Accumulator
Suit Case
BOPs :
(1) 11” 5M Annular – Hydril GK
(1) 11” 5M Double – Shaffer Style
(1) 11ft 5M Mud Cross with Wing Valves
Top Drive :
Venture Tech 250 T w/ (1) Top Drive Service Loop, (1) Bottom
Half for Top Drive Torque Track, Hydraulic Top Drive House p/b
(2) Detroit 60 Series (14.0 Litre), has “Dan Voss” Hydraulic
Drive Pump System – (2) Pumps ea (4) Outlets ea, (1) Bug Blower
(1) Basket with (6) Crossover Subs
Junk Basket, Floor Hand Rails, Flow Line Skid with hoses,
(2) Oteco Valves, Miscellaneous Flow Line Plumbing,
(1) 4ft x 20ft V Door, (3) Saver Subs, (1) Crossover Sub
Accumulator :
Advanced Pressure Inc., (12) Bottles, 5 Station, 3000PSI System,
S/N: 11871, (2) 55 to 1 Air Pumps, (8) Steel Flex Accumulator
Lines, (1) Pressure Washer Power Swivel, Venture Tech,
Model: XK 250 Ton
Generator House :
Genset # 1, Engine: 12V 2000, Generator: Kohler – 450KW,
Model: Power Systems 600
Genset # 2, Engine: 12V 2000, Generator: Kohler – 450KW,
Model: Power Systems 600
(1) Screw Compressor – Gardner Denver, Electra Saver,
Model: EBE 990, S/N: S334319
Mud Boat – Main Section, 60ft Long x 10ft Wide (4) 12” Beams
Mud Boat – Extension, 17ft 3” Long x 11ft Wide
Substructure, 35ft Long x 11ft Wide
Rotary Table, Sentry – 20.5”, Date: 2007, S/N: 074102
(1) Rotary Angle Gear Box
(1) 40ft Parts House with Divider
(1) Wire Line 15,000 x .092 – Five Star
Consumables
Camp Transformer – 6 Outlets
Location : USA
| |
| |
|
Id: WR943
 10T Pump Hoist Rig for Sale
Worldrigs ID: WR943 Description :
Smeal 10T Pump Hoist Rig
Hydraulic Leveling Jacks
Mounted on a 1988 Ford L7000 Truck
Diesel Engine
Note:
Needs tires, some hydraulic hoses, cable lines replaced, etc. and some cleaning up
Location : USA
| |
| |
|
Id: WR1038
 1200T SWL Pedestal Crane - For Sale
Worldrigs ID: WR1038 Description :
Principal Particulars :
Maker : NOV/Am-Clyde
Class : DNV incl. man riding
Crane Voltage : 690V, Crane equipped with 6,6 KV transformers
Crane Capacities :
Capacity Main : 1200t@14-31m,600t@50m, 250t@70m
Capacity Aux : 500t@20.3-60m, 120t@100m
Capacity Whip : 50t@22.9-113.4m
Man-riding Capacity : 5 ton all radii
Boom Length (from center line of boom foot pin) :
Length to main fall upper block sheaves : 85.5m
Length to auxiliary fall upper block sheaves :107.0m
Length to whip fall jib tip sheaves :115.0m
Operating Radius :
Main fall : 18.0-91.0m
Auxilliary fall : 20.0-105.0m
Whip fall : 22.55-113.41m
Winches :
Main hoist winch : 66.8 MT single linepull at 64m/min, 4x186 KW
Aux hoist winch : 68.7 Mt single linepull at 62m/min, 4x186 KW
Whip hoist winch : 27.5 MT single linepull at 158m/min, 4x186 KW
Boom hoist winch : 2.3 MT single linepull at 26-61m/min, 3x186 KW
Swing drives : 6x149 KW, Swing speed 0,3 RPM
Tugger winches, 4xload control : 25 MT single line at 16m/min,75 KW each
| |
| |
|
|
|
Id: 9000-440
 Oilwell 760E Drilling Rig for Sale
Worldrigs ID: WR512 Drawworks
Oilwell 760-E, 1000 HP, Low Low rated 600,000#,
single line pull, w/10 lines, twin GE 752 DC motor input, Wichita
Air actuated/water cooled 236 disc brake, 1 ¼” wire rope
6x19 IWRC.
Prime Power
Omron/SCR system, (3) Generator Bays, (3) SCR Bays,
(3) Caterpillar 3512B with Kato 1365 KW AC Gen Sets.
Auxilary
Cold start air system, primary rig air supply, floor hoisting systems
Mast/Substructure
Branham 142’, 600,000# hook load with 20’ box on box, 500,000#
setback, Crown block (6) 42” sheaves 1 ¼” groove, Fastline (1)
55” 1 ¼” grooved.
Top Drive – Traveling Block- Pipe Handling
CanRig Model 6027 VF AC 250 Ton, National 500 Ton Block,
27 ½” rotary, drawworks driven.
Mud Pumps
(2) Ideco T-1300, 1300 HP Triplex, each driven by twin
GE-752 DC motors
Mud System
(2) Tank system (1200 bbl Capacity), Twin National 285P linear
motion shale shakers, (7) NOV mud agitators, NOV Brandt
desander (3) 10” cones with 6x8x11 centrifugal driven by
100HP electric motor, NOV deSilter (20) 4” cones with
6x8x14 centrifugal driven by 100 HP electric motor,
NOV Brandt D-1000-C Degasser and 48 x 20 gas buster.
BOP Equipment
11” 5,000# Annular, 11” 10,000# Double Ram, Church Energy
3,000 psi accumulator, 180 gal, 6 station with remote, 4 1/16”
10,000# WP x 2 1/16 10,000# WP Choke Manifold H25 Trim.
Fuel Tank : 18,000 gal
Water Tank : 500 bbl
Auxilary Equipment
Deadline Anchor, Weight indicator, Pump SPM and PSI, Top
Drive control house, SCR system controls, manual tongs,
elevators, slips and clamps.
| |
| |
|
Id: WR1076
 Atlas Copco Boomer L2C Drilling Rig - For Sale
Worldrigs ID: WR1076
Description :
Atlas Copco Boomer L2C Drill Rig
Diesel Motor 2013 L042V Deutz
Transmission Dana Spicer Series AVO11D254E
Front Differential Dana Spicer Series AVO11D214E
Rear Differential Dana Spicer Series NBEA378017
Last registry of hours : August 2018
Hours on the Diesel Motor : 1,017 Hours
Arm 1 = 154 Hours on Electric Motor
Arm 2 = 157 Hours on Electric Motor
Location : Northern Mexico
| |
| |
|
Id: 9000-340
National 110UE Drilling Rig -1500 hp - for Sale
Worldrigs ID: WR25 Description
National 110UE 18,000' Drilling Rig
Newly Refurbished, 1500 HP Electric, +/- 18,000’ Capacity drilling rig
Drawworks :
National 110 UE 1500HP Single Drum Drawworks, Lebus Grooved
f/1-3/8” Line, Makeup & Breakout Catheads, with Petron Driller’s
Control Console, Crown-O-Matic. Drawworks is remanufactured
by major machine shop with warranty.
Drawworks Power :
Apollo 752 DC Traction Motor, S/N-7514175, 1000 HP, with Emerson
AB34 10 HP Electric Blower Assembly, S/N-YC10E1B1.
Apollo 752 DC Traction Motor, S/N-7505238, 1000 HP, with Emerson
AB34 10 HP Electric Blower Assembly, S/N-YC10E1B2
Brake :
Rade Tech 88058DS Electric Brake
Derrick :
Skytop 142’H Cantilever Beam Leg Mast, 1,000,000 Lb. Static Hook Load,
Pin-Type, SKYTOP Crown Block w/(6) Crown Sheave Cluster, Crown
Safety Platform, Racking Board, Tong Counterweights, Ladder, Derrick
Climber, Mast Stand, 3-1/2” Standpipe & Manifold. Mast and sub will be
reconditioned and API inspected by Superior Derrick Service. Both mast &
sub were built in 1981 but never put in service until 2006.
Substructure :
Skytop 28’W x 26’H x 72’L Swing-Up Substructure, 1,000,000 Lb. Casing
Load, 600,000 Lb. Setback Capacity w/Rotary Beams, V-Door Ramp, Type
EB Deadline Anchor, Stairs, Safety Rails.
Power Source :
Kato 1050 KW AC Generator, S/N-2782533447, p/b CAT D399 Diesel Engine,
w/Air Starter, Radiator, Gauges, Mounted on 10’W x 30’8”L Covered Skid.
Rebuilt and engines load tested.
Kato 1050 KW AC Generator, p/b CAT D399 Diesel Engine,
S/N-35B066244, w/Air Starter, Radiator, Gauges, Mounted on 10’W 30’8”L
Covered Skid. Rebuilt and engines load tested.
Kato 1050 KW AC Generator p/b CAT D399 Diesel Engine w/Air Starter, Radiator,
Gauges, Mounted on 10’W x 30’8”L Covered Skid. Rebuilt and engines load tested.
SCR Unit :
IDM 4-Bay SCR Unit, S/N-505622, w/9’2”L Porch, Switchgear & Instrumentation to
Control (3) 1050 KW AC Generators, Includes: (1) Brake Control Box, GE E-9000
Line Series Motor Control Center, Mounted in 10’3”W x 29’2”L Temperature-Controlled
House w/(2) Eubank V72-10733 Air Conditioners, S/Ns-KT025145323R &
KT025146323R, (1) Hammond750 KVA Transformer, S/N-DB05J231, (1) Hammond
75 KVA Transformer, S/N-DAJST0DB822, Mounted on 10’3”W x 29’2”L Skid.
Rebuilt and tested.
(4) Shopbuilt 1’W x 9’L Electrical Suitcases
(6) Shopbuilt 3’7”W x 22’9”L Electrical Suitcases w/Grasshopper
Air Package :
(Note : Mounted on Generator Skids)
World Air RVK-40 Air Compressor, S/N-5483, p/b WEG 30 HP Electric Motor, Mounted
on No. 1 Generator Skid
Curtis Air Compressor, S/N-20601, p/b Baldor 20 HP Electric Motor,
S/N-206813260264, w/230-Gallon Air Receiver Tank, Mounted on No. 1 Generator Skid
BEL AIR 3D3HL Air Compressor, S/N-147266, p/b Baldor 20 HP Electric Motor,
S/N-20601260264, w/230-Gallon Air Receiver Tank, Mounted on No. 2 Generator Skid
Pump (Primary) :
LS NOI 3NB1300C(10P130 style) Triplex Mud Pump, S/N-205-002, 1300 HP, w/(3)
6-3/4” x 10” Forged Steel Fluid Ends, Quick-Change Valve Caps & Cylinder Heads,
LS NOI 5000 PSI Pulsation Dampener, S/N-4J28, Double Life 5” x 6” Centrifugal
Charging Pump, S/N-5218, p/b Emerson 50 HP Electric Motor, S/N-C0510190029,
5000 PSI, Pressure Gauge, Mounted on 9’8”W x 30’2”L Skid.
Pump Power :
(2) Apollo 752 DC Traction Motor, S/N-41160046, 1000 HP, w/Emerson AB34 10 HP
Electric Blower Assembly, S/N-YC10E1B
Apollo 752 DC Traction Motor, S/N-7539480, 1000 HP, w/Emerson AB34 10 HP Electric
Blower Assembly, S/N-YC10E1B
Pump (Standby)
LS NOI 3NB1300C (10P130 style)Triplex Mud Pump, S/N-204-030, 1300 HP, w/(3)
6-3/4” x 10” Forged Steel Fluid Ends, Quick-Change Valve Caps & Cylinder Heads, LS
NOI 5000 PSI Pulsation Dampener, S/N-4J4, Double Life 5” x 6” Centrifugal Charging
Pump, S/N-5219, p/b Emerson 50 HP Electric Motor, S/N-C0510190034, 5000 PSI,
Pressure Gauge, Mounted on 9’8”W x 30’2”L Skid.
Pump Power :
(2) Apollo 752 DC Traction Motor, S/N-7538070, 1000 HP, w/Emerson AB34 10 HP
Electric Blower Assembly, S/N-YC10E1B
Apollo 752 DC Traction Motor, S/N-7428792, 1000 HP, w/Emerson AB34 10 HP Electric
Blower Assembly, S/N-YC10E1B
Rotating Equipment :
MUD KING RT275 27-1/2” Rotary Table, S/N-27511, w/Split Master Bushings, p/b
Apollo 752 Traction Motor w/Emerson AB34 10 HP Blower Assembly - Rebuilt.
Mud King 450-Ton Swivel - Rebuilt
5-1/4” x 40’L Hex Kelly
Varco HD Kelly Drive Bushing
International tools kelly spinner - Rebuilt
TIW Upper Kelly Spinner
TIW Lower Kelly Spinner
Traveling Equipment :
Ideco 525-Ton Block/Hook Combination Rebuilt
2-3/4” x 132” Elevator Links
Well Control Equipment :
Hydril GK Type 13 5/8” 5000# Annular Blowout Preventer - Rebuilt
Schaffer LWS Type- 13-5/8” x 5000 PSI DOUBLE Blowout Preventer - Rebuilt
Choke Line: (1) 4-1/16” x 10M Gate Valve, (1) 4-1/16” x 5M HCR Valve
Kill Line: (2) 2-1/16” x 10M Gate Valves, (1) 2-1/16” x 5M Check Valve
CPCPB 40-32 5-Station Closing Unit, S/N-4635, w/(16) 11-Gallon Accumulator Bottles,
Triplex Pump, S/N-05556, p/b Baldor 20 HP Electric Motor, S/N-20502170516, (2) Air
Pumps, S/Ns-205902170516 & 205902170517, Gauges, 8’W x 8’2”L Skid. Pressure tested.
5 - Station remote closing unit, mounted in doghouse
5000 PSI Choke Manifold w/5-Way Cross, (2) 4-1/16” x 10M Gate Valves, (7) 2-1/16” x 10M
Gate Valves, (2) 2-1/16” x 10M Adjustable Chokes, Mounted on 8’W x 14’L Adjustable-Height
Skid.
Rig Houses :
Shopbuilt 7’9’W x 25’1”L Doghouse w/5’L Covered Porch, Knowledge Box, Bench Storage,
Cabinets, Lights, Skidded
Shopbuilt 10’2”W x 33’1”L Change House w/Round Top, Knowledge Box, (24) Lockers, Bench
Storage, Cabinets, Washer, Lights, Skidded
(2) Shopbuilt 8’W x 19’10”L Parts Houses, Each w/Round Top, Parts Bins, Skidded
Mud System :
Shopbuilt 10’W x 9’6”’H x 50’L 543-Barrel Suction Tank w/9’L Covered Porch, (3) Compartments,
(5) Grove Gear 7-1/2 HP Mud Agitators, S/Ns-801759310051, 8017513100 & 80175931105,
Each p/b Marathon 7-1/2 HP Electric Motor, S/Ns-BV74445, BV74457, BV74456, BV74448
& BV74443, Mud Hopper, Caustic Tank, Internal Plumbing, Flat Bottom, Top-Mounted Walkways,
Stairs, Safety Rails, Skidded
MCM 5” x 6” Centrifugal Mixing Pump, S/N-11945, p/b Baldor 50 HP Electric Motor,
S/N-C065180234
MCM 5” x 6” Centrifugal Mixing Pump, S/N-11288, p/b Baldor 50 HP Electric Motor,
S/N-C065180224
Shopbuilt 10’W x 9’6”’H x 50’L 543-Barrel Shaker Tank w/10’W x 9’L Covered Porch, (3) Compartments,
Grove Gear 7-1/2 HP Mud Agitator, S/N-80175931005, p/b Marathon 7-1/2 HP Electric Motor,
S/N-BV74454, Internal Plumbing, Flat Bottom, Top-Mounted Walkways, Stairs, Safety Rails, Skidded
MCM 5” x 6” Centrifugal Desilter Pump, S/N-11915, p/b Marathon 50 HP Electric Motor
MCM 5” x 6” Centrifugal Desander Pump, S/N-11945, p/b Baldor 50 HP Electric Motor,
S/N-C0508110044
Odrill/MCM Linear Motion Shale Shaker - New
OdrillL/MCM Linear Motion Shale Shaker
Double Life Desander, S/N-3159, w/(2) 10” Cones
Double Life Desilter, S/N-3158, w/(8) 2” Cones
Dreco “Deep Pit” Degasser, S/N-3295, p/b Baldor 5 HP Electric Motor
Shopbuilt 10’ W x 9’6”H x 50’ long Mixing Tank. Two 15 hp Agitators. High pressure guns. Pit levelers.
Dump gates. Three Dividers. Oilfield Three Runner skid.
Water / Fuel Tanks :
Shopbuilt 10’2”Dia x 42’3”L 500-Barrel Water Tank, Skidded - New
Baker SPD 2” x 3” Centrifugal Water Pump, S/N-2012, p/b Teco 25 HP Electric Motor, S/N-050501000,
Mounted on Generator Skid No. 3
BAKER 2” x 3” Centrifugal Water Pump, S/N-2017, p/b Teco 25 HP Electric Motor,
S/N-05134600909, Mounted on Generator Skid No. 3
Shopbuilt 8’Dia x 32’3”L 12,141-Gallon Fuel Tank w/(2) SIEMENS Fuel Transfer Pumps, Each p/b Teco 2 HP
Electric Motor, S/Ns-BQ0520600001 & BQ0520600002, w/4’L Covered Porch, Skidded
Murphy 5-Compartment Lubester w/Pumps, Hoses, Reels, Mounted on 6’W x 13’L Skid
Handling Tools :
Varco SSW-10 Pipe Spinners
Type DB 3-1/2” x 10 3/4” Rotary Tongs, S/N-10031M1399 - Rebuilt
5” 350-Ton Drill Pipe Elevators
5” Drill Pipe Slips
6-1/2” Drill Collars Slips
8” Drill Collar Slips
6-1/2” & 8” Safety Clamps
Juling XJF5-35 Air Hoist, S/N-0509-1, 10,000 Lb. Capacity
Juling XJF5-35 Air Hoist, S/N-0509-2, 10,000 Lb. Capacity
5” Mud Bucket
Instrumention :
Petron Weight Indicator, S/N-G1800 (NOTE: Located in Doghouse - Rebuilt
Totco Automatic Driller - Rebuilt
M&F Type D Mud Gauge, S/N-6773 - New
Auxiliary Equipment :
3-1/2” x 65’L Rotary Hose - New
3-1/2” x 12’L Vibrator Hose - New
3-1/2” x 18’L Vibrator Hose - New
Shopbuilt 5’W x 18”H x 60’L Catwalk, 2-Section, Steel Deck
(3) Sets of (6) 18”H x 28’L Shopbuilt Triangular Pipe Racks
Shopbuilt 8’W x 40’2”L Junk Box, Skidded
FIVE STAR Wireline Measuring Device, S/N-XCU081006N4, w/15,000’ of .092 Wireline - New.
1-3/8” Drill Line w/Ingersoll-Rand Air Tugger, S/N-SP051123032, Chain Driven. New drilling line
Rathole & Mousehole
Fluorescent, Mercury-Vapor & High-Pressure Sodium Rig Lights w/Wiring - All new wiring
Miscellaneous Spare Parts, Valves, Fire Extinguishers, Etc.
| |
| |
|
|
|
Id: WR889
 New Electric Land Drilling Rig for Sale
Worldrigs ID: WR889 Technical Description
A.1 Crown Block - Qty : 1 set
- Model: TC350
- Static hook load capacity: 3500KN
- Six (6) cluster sheaves and one (1) fastline sheave.
- Each sheaves grooved for 35mm (1-3/8") wire line.
- Confirming to API Spec.8C 5th Edition and API Spec 4F latest Edition; PSL1; SSL: E2 U2
- Dia. of main and fast line sheaves: 1524mm
• Crown saving Bumper blocks,secured cable and secondary retention by heavy wire mesh.
• Crown block have proper platform with proper railing & toe board.
A.2 Mast - Qty : 1 set
- Model : JJ350/45.5-K
- Wireline - raising type
- Effective height: 45.5m;
- Max. Static hook load: 3500KN;
- Height of monkey board: 24.5m,25.5m,26.5m;
- Monkey board to support 185 stands of 5" DP, 6 stands of 6-1/2", 5 stands of 8-1/4" DC and 2 Stands
of 10" DC. (Racking capacity).
- Confirming to API Spec.4F Latest Edition; PSL1; SSL: E2/U2; API monogrammed.
- Mast allowed wind capacity :
• Operational wind (The wind below which unrestricted drilling operations may be continued) : 16.5m/s(32knots)
• Unexpected wind(No hook load, full of setsback) : Min.30.7m/s (60knots)
• Expected wind(No hook load, no setsback load ) : Min.38.6m/s (75knots)
• Erection wind : 16.5m/s (32knots)
A.3 Substructure - Qty : 1 set
- Model: DZ350/9-S
- Slingshot-raising type
- Rotary beam load : 3500kN;
- Setback rated capacity : 1800kN;
- Drill floor height : 9m;
- Rig floor area : 13.73m×11.15m
- Clear height(rotary beam to ground) : 7.6m;
- Two(2) sets tong tail line anchor
- Confirming to API Spec.4F latest Edition; PSL1; SSL: E2/U2.
| |
| |
|
Id: WR1077
 CME 850 Drilling Rig - For Sale
Worldrigs ID: WR1077
Description :
1989 CME 850 Drill Rig
6200 Hours
Includes 5 winches
3L8 Moyno pump
Autohammer & Cathead
fluted Kelly and manual chuck
Storage
Rewired in 2023 and many new parts
In working condition per seller
Note: Steering brakes need attention, Clark transmission and hydraulics need TLC
Location : USA
| |
| |
|
Id: 9000-438
 National 80-B Land Drilling Rig for Sale
Worldrigs ID: WR510 Drawworks
National 80-B, 1000 HP mechanical, driven by National
Compound, 540,000#, single line pull w/10 lines, Parmac
481 hydromatic auxiliary brake.
Prime Power
(3) Cat D3508 with National C-300-80 torque converters
AC & Aux Power
Cat 3406 with 325 KW AC and cat C-15 455 KW AC generator
sets. 1-1/4” wire rope 6x19 IWRC. Cold Start Air System, primary
rig air supply, floor hoisting systems.
Mast/Substructure
DSI 142’ 760,000# hook load with 21’ box on box with 12 lines strung
with 450,000# set back, Crown block (6) 48” sheaves 1 ¼” grooved,
Fast line (1) 55” 1 ¼” grooved.
Traveling Equipment
National model 545-G-350 hook/block combo, National P-400 swivel
(400 ton), National C-275 rotary table
Mud Pumps
(2) National 9-P-100 triplex, 5,000psi, tail driven off National Compound
Mud System
(3) tank system (1,100bbl capacity), NOV Brandt DLMS-285P Liner
Motion Shaker, (4) Brandt Max 2000 Mud Agitators, NOV Brandt desander
(2) 12” Cones with 8x6x14 centrifugal driven by 60HP electric motor,
NOV Brandt (6) 6” cone desilter driven by 8x6x14 centrifugal with 50HP
electric motor, and 48 x 20 gas buster.
BOP Equipment
13 5/8”, 5.000# Annular, 13 5/8”, 5.000# Double Ram,
Koomey Type 80-3,000# Accumulator, 4 1/16”, 5,000# x 2 1/16”, 5,000# choke manifold.
Fuel Tank : 18,000 gal
Water Tank : 500 bbl
Auxiliary Equipment
Deadline Anchor, Weight indicator, Pump SPM & PSI Manual Tongs,
elevators, slips and clamps
| |
| |
|
|
|
Id: WR1075
 Schramm T450 Drilling Rig - For Sale
Worldrigs ID: WR1075
Description :
1985 Schramm T450 Drill Rig - S/N: T450-1732
Mounted on a GMC truck with a Gas Engines (Runs Rough) -
can be remounted but would be extra cost.
VIN #1GDP7DIE3FV619551
17,704 Miles Showing on Odometer
GHH 500 cfm / 300 psi Air Compressor with Clutch - we can
also add either centrifugal mud pump or duplex piston pump
on this drill for additional cost.
Detroit 671T Diesel Deck Engine
4 hydraulic leveling jacks
2-Cylinder Bean Water Injection Pump
“No Drill Rods or Tooling Included” Cost extra - carousel
is set up for 20 ft. lengths Mayhew Jr. drill pipe.
Location : USA
| |
| |
|
Id: WR1019
 Drilling Rig for Sale-1.webp "Derex 1340-14X DR (Dual Rotary) Drilling Rig - For Sale") Derex 1340-14X DR (Dual Rotary) Drilling Rig - For Sale
Worldrigs ID: WR1019
Description :
Derex 1340-14X DR (Dual Rotary) Drill Rig
Truck
Acela Monterra 6×6
No Emission Controls
330HP Caterpillar 7.2L Turbo-Charged Diesel Engine
Full-Time All-Wheel Drive
Allison Automatic 7-Speed Transmission
U.S. Army “Ultra-Reliable” Certification
22″ Ground Clearance
Deck Motor
Cummins 6.7 litre 300 HP tier 4
Hydraulic System
Bosch Rexroth plus gear pump
Top Head
Variable torque and RPM with 2” thru-hole
0-125 rpm @ 3,500-lbf
Lower drive
Variable torque and RPM with 10” thru-hole
0-23 rpm @ 20,000-lbf
Diverter
Simple seal design with 4” NPT discharge
to control cuttings.
Derrick & Feed System
13ft top head stroke (handles 10ft x 3" OD drill pipe)
40,000-lbs pullback
20,000-lbs pulldown
100 FPM
Derrick slide/ dump
4ft Derrick slide for angles up to 45°
Main Winch
Manual jib
2,500 lb.
Remote on helpers side for winch
Control Panel
Straight hydraulic controls (no electrics to fail)
Marine grade electric switches (for lights)
Murphy engine monitor display
Twin platforms
Leveling Jacks
Four 36” stroke independently controlled
Night Lights
6 LED night lights
Toolboxes
30”x 18” x 18”
Overall Dimensions
Length: 24ft 11”
Width: 8ft 6”
Derrick up height: 24ft 6” – 28ft 6” with Derrick slide
Derrick down height: 11ft
Water Injection
9 gpm FMC injection pump
Gross Weight
28,000lbs - 30,000lbs
Casing
Diameter 4", 5" & 6" (with 8" & 10" option for surface casing)
Pre-Order Drill from EWDAdditional Options
4 – 6 Month Leadtime from Date Ordered
Sand Line Winch
1,500ft sand line
Mud Pump
3x2x13 centrifugal 300 gpm/300 psi
Centerline piston 150 gpm/600 psi
Air Compressor Options
Vanair / Sullair 600cfm / 250psi @ 1,800rpm
Vanair / Sullair 733cfm / 150psi @ 2,200 rpm
Line Oiler
Many oilers available
Water InjectionDrill Pipe Packages
18 gpm FMC injection pump
Wire Feeder and Box
Hydraulic or Gas Welders
Location : USA
| |
| |
|
Id: WR1051
 Canterra CT250 Torquemaster Series Monitoring Drilling Rig - For Sale
Worldrigs ID: WR1051
Description :
1991 Canterra CT250 Torquemaster Series Monitoring Drill Rig
- S/N: C7250-00054
Set up for water well & geotech drilling for auger & coring
10,000 Ft-Lb Rotary Torque
Stepless Rotary Speed, 0-175 Rpm
Gear Driven Rotary, Instantly Reversible
18,500 Pounds Pullback, 0·90 Fpm
18,500 Pounds Pulldown, 0-90 Fpm
Long 23ft Foot Stroke, Chain Feed
Cummins Diesel Engine On Deck
Triple Stage Engine Air Filtration
High Capacity Hydraulic Oii Cooler
All Functions Hydraulically Operated
Variable Speed
Integrated Hydraulic Control Manifold
Top Drive Swings Off Hole Vertically
Failsafe Hydraulic Winch
Breakout Table And Hydraulic Wrench
Coring Speed Shift Range 1-710 Rpm
Water Well Rotary Head, 3150 Ft-lb / 0-115 Rpm
Sandline Wich
Auto Sample Spudder
Two Inch Circulating Plumbing
Two Inch Swivel For Mud
Air Or Foam Drilling
3x4 Centrifugal Mud Pump
Moyno Pump
200 Cfm Developmental Air Compressor
Jib Winch For Handling Augers, Rods, Tools
Single Rod Loader For Adding Rods
Rod Spinner
Powered Breakout Table
Cathead - Hydraulic Powered
Wagtail, Slid Base
Auger Guides
Suitable For Dth Hammer
Rock Drilling With Auxiliary Air Compressor
Lubrication For Downhole Hammers
4 Leveling Jacks
Auger Rack
Coring Spudder Etc. Are Included But Not Currently Mounted On Drill
As Previous Operator Was Using For Mud Rotary And Air Rotary Drilling
Rated To Drill Up To 8" Diameter Holes To 500 Ft. Depth
Can Also Run Hollow Stem Augers To 180 Ft
Core Drill To 80-0 Ft
Nearly $50,000 Worth Of Repairs And Upgrades Completed In 2022 Through 2023
Including 1 New Hydraulic Pump And 1 Reman Hydraulic Pump
Comes With 400 Feet Of 3-1/2 Inch Od By 20 Foot Drill Pipe
Mounted On 1991 International 4800 Series Truck
4x4 (4-Wheel Wheel Drive)
Location : USA
| |
| |
|
|
|
Id: WR650
 2001 Built Swing Up Triple Rig
Worldrigs ID: WR650
General Description
Year Built/Rebuilt : 2001
Estimated Drilling Depth : 20,000 ft
Estimated Rig Move Loads : 150
Estimated Camp Move Loads : 32
Rated HP : 2000
Mast
Height : 162.00 ft
Static Hook Load Capacity: 1,275,000 lbs
Mast Racking Capacity : 24,500 ft
Substructure
Style : Parallelogram
Height : 35.00 ft
Clear Height : 30.50 ft
Casing Capacity : 1,275,000 lbs
Maximum Setback Load (lbs.) : 750,000
Drawworks
Make : National
Model : 1320 UE
Power Rating : 2,000hp
Input Power : 2 ea. General Electric 5GE 752 R6A
Brake Type - Band or Disc : Band
Drilling Line size : 1 3/8"
Auxiliary Brake : Baylor 7838
No Top Drive
Swivel
Make : Continental Emsco
Model : LB-500
Capacity : 500 Ton
Rotary Table
Make : NOV D-375
Table Opening : 37 1/2"
Maximum Load Rating : 650 Ton
Power Generation
SCR / VFD / DC/DC : SCR Rig
Mud System
Mud Pumps : 3 ea Oilwell A-1700 PT 1,700hp @ 150 spm
Reserve Mud Volume :2000 bbls
Pressure Rating : 5,000 psi
Active Mud Volume : 2,000 bbls
Shale Shakers : 1 ea Brandt K-1215-N
Desander : Brandt 6" x 2 Cones
Desilter : Brandt 2" x 16 Cones
Mud Cleaner : 2 ea Brandt K-1215-N
Centrifuge : N/A
Well Control
Double Ram : 13 5/8" 10,000psi, Cameron, U
| |
| |
|
Id: WR1081
 Schramm T555 Drilling Rig - For Sale
Worldrigs ID: WR1081
Description :
2003 Schramm T555 Drill Rig - S/N: J109-0101
Caterpillar C15 Diesel Deck Engine
Sullair 1050 cfm / 350 psi Air Compressor
Less Than 2,000 Hour Since Rebuilt
9,653 Hours On gauge
Main Pump Just Rebuilt
6 Rod Carousel Inside Cable Feed
Basic Rod Handling
Table Bushings & basic tooling Included
No Pipe Included but 500 ft of Drill Pipe (20ft x 4-1/2" x 3-1/2" API)
Available at an extra cost
Mounted On A Sterling Truck
CAT Diesel Engine
19,206 miles on gauge
Location : USA
| |
| |
|
Id: WR1084
 Sandvik M5 Drilling Rig - For Sale
Worldrigs ID: WR1084
Description :
2007 Sandvik M5 Drill Rig
1075 cfm / 350 psi Air Compressor
12,000lb Winch
Setup For 4.5" Rods
8000+ hours
Cummins 565 Diesel Engine
New Transfer Case
| |
| |
|
|
|
Id: WR915
 Simco 2400 SK-Drilling Rig - For Sale
Worldrigs ID: WR915
Description :
Simco 2400 SK-Drill Rig
Torque 2400 ft/lbs
0 to 185 rmps
Can pull 7600 lbs & push 7600 lbs
1800 lbs winch lift
Net stroke 74'
Using conventional auger
rated to bore a 10" diameter hole 0-100ft deep
rated for a hollow auger can go up to 60ft deep at 3 1/4" to 4 1/4" diameter
and 0-25ft with a 6 1/4" diameter
rated core drill it can go 250ft AWX and 150ft NWX
The drill was mainly used for finding water main leaks,
and has received regular maintenance
Can be Mounted on a 1995 Ford F-450 Truck
Location : USA
| |
| |
|
Id: WR907
 Bucyrus Erie 10R Table Drive Rotary Drilling Rig - For Sale
Worldrigs ID: WR907
Description :
1975 Bucyrus Erie 10R Table Drive Rotary Drill Rig
8" retractable table
New sleeve in mud pump
5/8” casing line & kelly line
9/16” sand line
Air compressor 3 cylinder 2" plumbing
Stored indoors when not in use, Never abused, all original
Lot of subs & drill bits included
600 ft of 3-1/2" (15 ft) drill pipe included
12" 8" 6" stabilizers and mud pan included
Mounted on 1974 Ford truck
Rebuilt - Caterpillar 3208 diesel engine
Newer tires on front
Location : North America
| |
| |
|
Id: WR753
 Trailer Mounted Telescopic Mast, Double Rig for Sale
Worldrigs ID: WR753
Description :
General Description :
Make : Victory
Year Built/Rebuilt : 2009
Estimated Drilling Depth : 12,000 ft
Estimated Rig Move Loads : 48
Estimated Camp Move Loads : 22
Rated HP: 850
Mast :
Height : 105.00 ft
Static Hook Load Capacity : 350,000 lbs
Mast Racking Capacity : 12,000 ft
Substructure :
Style : Telescoping Mounted on Trailer
Height : 20.00 ft
Clear Height : 17.00 ft
Casing Capacity : 440,000 lbs
Maximum Setback Load (lbs) : 375,000
Drawworks :
Make : TSM
Power Rating : 850 hp
Input Power :
1 ea General Electric
GEB 22 A3
Brake Type - Band or Disc : Disc
Drilling Line Size : 1 1/8"
Auxillary Brake : TSM 236H SSB 90#RL W/CVCP
Top Drive / Power Swivel :
Make : Victory Rig Equipment
Model : VRT200H
Capacity : 220 Ton
Torque - Continuous : 16,000 ft-lb
Swivel :
No Swivel
Make : TSM
Model : TSM 200
Capacity : 200 Ton
Rotary Table :
Make : TSM 17.5
Table Opening : 17 ½"
Maximum Load Rating : 150 Ton
Power Generation :
Engines : 3 ea Caterpillar C 32
Generators : 3 ea Caterpillar SR 4 B
SCR / VFD / DC/DC : VFD Rig
Enhancements :
Forklift : Caterpillar 930 H
Iron Roughneck : NOV ST-80 C
Mud System :
Mud Pumps :
2 ea Weatherford Oil Tools MP-10
1,000 hp @ 140 spm
Reserve Mud Volume : 0bbls
Model : TSM 850
Pressure Rating : 5,000 psi
Active Mud Volume : 905 bbls
Power Rating :
Shale Shakers : 2 ea MI Swaco Mongoose
Mud Cleaner : N/A
Desander : Brandt 10" X 2 Cones
Desilter : Brandt 5" X 16 Cones
Centrifuge : N/A
Well Control :
Annular :
11" 5,000 psi, Doyles Valves,
Single Ram Preventer :
11" 10,000 psi, Doyles Valves, Type-U
Double Ram Preventer :
11" 10,000 psi, Doyles Valves, Type-U
Choke Manifold :
Weatherford Oil Tools
4 1/16"" 5,000 psi
BOP Closing Unit :
T3 Energy Services
6 Station 3,000 psi
Location : Mexico
| |
| |
|
|
|
Id: WR1083
 GEFCO 40K Drilling Rig - For Sale
Worldrigs ID: WR1083
Description :
2019 GEFCO 40K Drill Rig
Mounted To a 2020 Peterbilt 367 Truck
Cummins Diesel Engine - Rated 550 HP
350 Psi X 1000 Cfm Air Compressor
Bean Injection Pump with Retractable Hose Reel
4 X 3 X 13 Centrifugal Pump
Hydraulic Pipe Spinner
Petol Breakout Wrench
PL2 Auxiliary Winch
Tooling Included with Sale of Rig: 54 Drill Pipe (4-1/12 X 20 X 2-7/8 IF)
Including 6 Joints of Carousel Pipe
Overburden Drilling System with NUMA Super Jaw T-140 (QL-50)
With 30 Bit Hours
Note: Price Reduced Recently
Location : USA
| |
| |
|
Id: 9000-423
 Crown CE900ESD Drilling Rig for sale
Worldrigs ID: WR420 Drawworks:
One (1) S&S Model CE900ESD single drum, double shaft electric drive drawworks rated for 900 HP, with the following standard equipment. The Model CE900ESD Mechanical drive drawworks with band brakes consists of a single drum, double shaft drawworks mounted on a heavy-duty framework, with sheet metal covers and provisions for mounting one () DC Diesel engines. Auxiliary braking is achieved with an Eaton WCBD-336 Assist Brake.
Main Drum
Model: S&S CE900ESD
Drum Size: 22 in. x 46 in.
Lebus Grooving: 1-1/4 in.
Drum Clutch: Fawick Model 32VC1000
Brake Size: 44 x 11, c/w brake bands & brake linkage w/ greaseable pin conn
Drawworks speeds: Two (6) speeds with reverse through (2) Allison automatic transmissions
Cooling: Water circulating
Auxiliary Brake: Eaton (or equivalent) Model WCBD-336 Assist Brake Engines
(2) Detroit diesel series 60 @ 525 Hp each with Allisson 5861 transmissions
Assist Brake
One (1) Eaton (or equivalent) Model WCBD-336 Assist Brake, water cooled, with piping to edge of
driller’s side of the trailer for external water source (external water source & charge pump not supplied with unit).
Brake Water Cooling Manifold for Main Drum and Auxiliary
Brake Cooling
One (1) water-cooling system manifold for cooling main drum band brakes and auxiliary water brake,
complete with all necessary piping to edge of unit and controls. Includes connection for outside water supply.
Crown Saver
One (1) Automatic Crown Saver safety shutoff device to limit block travel, installed on drawworks, automatically
disengages clutch and sets main drum brake when block comes too close to crown block.
Hydraulic System
One (2) rig hydraulic system. Hydraulic system supplies power for trailer operations:
Hydraulic power supplied by separate Independent Hydraulic Power Unit
Rig hydraulic system includes all necessary piping to edge of unit and controls. Includes connection for
outside hydraulic power supply.
Tong pressure control
Trailer:
All the above mounted on a 2006 Crown One (1) S&S trailer. The 120,000 lb. quad suspension trailer comes complete with Sixteen (16) 315/80R22.5 tires. The trailer deck is covered with safety tread plate. The front of the trailer is equipped with two (2) hydraulic leveling/lifting jacks and two (2) mechanical jacks. Two (2) belly jacks are located in the middle of the trailer and two (2) hydraulic leveling jacks are located at the rear of the trailer. Trailer also comes complete with folding diamond grip walkways, handrails, and removable stairs located on both sides of the trailer.
Winches
Two (2) 12,000 lbs. hydraulic winches (Model PD-12C-1), one (1) controlled at Driller’s position and one
(1) controlled at pipe rack side of substructure floor.
Includes 325 ft. of ½ in. winch line. One (1) 6,000 lbs. hydraulic winch (boom pole), and 230 ft. of ½ in. wireline.
Deadline Anchor
One (1) Hercules Model HA119T (or equivalent) deadline anchor, 50,000#, for 1-1/4 in. wireline, deck mounted.
For compression-type hydraulic weight indicator load cell (customer to furnish load cell with weight indicator).
Mast:
Mast fabricated per Current API Specification 4F, Product Specification Level (PSL). One (1) S&S 118 ft. x 440,000 lbs. guyed telescoping mast; hollow structural steel framing, designed and built in accordance with API 4F, using three dimensional nonlinear dynamic finite element software. Maximum mast hook load capacity is 440,000lbs. on ten (10) lines. Mast is manufactured with all HSS construction for minimum weight and maximum stability. The mast is equipped with a ladder mounted on the off-driller's side. The safety platform, handrails, and a fall
arrest post are included with the crown frame assembly. The mast is equipped with block cradle and two (2) belly lines & two (2) load lines. Two (2) 3-stage hydraulic cylinders (chrome plated) are used for raising the mast and are equipped with safety chokes to prevent freefall in the event of a complete loss of hydraulic pressure. The mast incorporates Two (2) single acting, chromed, telescoping cylinders for raising the top section. The crown platform provides safety when servicing crown sheaves.
The crown block assembly comes with:
Four (4) 36 in. Fleet sheaves – grooved for 1 1/4 in. drill line
One (1) 42 in. Fastline sheave – grooved for 1 1/4 in. drill line
One (1) 30 in. Deadline sheave – grooved for 1 1/4 in. drill line
The crown block assembly uses all steel sheaves. The sheaves are mounted on tapered roller bearing inserts,
thus bearing failure will not damage the sheave. The fittings are provided for individual greasing of bearings.
Racking Board
One (1) automatic erecting racking board (for use with 18 ft. substructure). Welded fingers with 5 in. spacing for
4-1/2 in drill pipe.
Capacity for:
16,500 ft of 4-1/2 in drill pipe with 6-1/4 in. tool joint
Positioned for use with Range II tubulars in doubles
Complete with rear escape access
Make-Up and Break-Out Assembly
One (1) Make-up and break out assembly consisting of the following:
Unit comes with Two (2) 4 in. x 96 in. hydraulic cylinders, sheaves, rollers, and cables,
including rollers on inside edge of mast leg.
Make and break cylinders mounted on back of mast
Hydraulic controls for make up and breakout functions, mounted over driller’s console with automatic
centering at end of cylinder stroke
Top Drive:
Tesco 250 Ton HXI 700 Top drive system (serial no. 921)
PLC System
D4P – 700 power unit, caterpillar 700 HP C-18 Prime Mover wit a 4 pump drive.
Rated capacity through load collar 250 Ton 227 tonne
Rated horsepower 700 hp 522 kW
Max. continuous drill torque 24,000 ft-lb 3,254.5 daN-m
Make-up/Breakout torque 32,000 ft-lb 4,339.4 daN-m
Max. speed 200 rpm
Weight of the top drive plus:
elevators
elevator links
yoke + links (counterbalance system)
14,000 lb 6350 kg
Length (250T, with 9 ft. links) 17.5 ft. 5.3 m
Width 4 ft. 1.2 m
Quill connection NC50
Substructure (Manual Telescoping Lift):
One (1), 18 ft. high substructure (floor height). Skid mounted manually raised telescoping substructure. Substructure is raised and lowered using traveling block. Complete with one (1) set of stairs to trailer, timbers under setback, mouse-hole, rathole, tong backup posts, handrails, slip support beams for slip bowl (includes non-rotating slip bowl) and pipe ramp with stair to 3 ft x 6 in catwalk. Base of substructure to be plated on top and seal welded on bottom. Plugged drains to be installed for each compartment. Includes mast load beam (T-sill) with pin connections to substructure and mud boat. Includes 24 in clearance for v-door.
Specifications
Dimensions
Floor Height: 18 ft.
Width (Working Floor): 23 ft. 4 in.
Length (Working Floor): 12 ft.
Length (Porch): 4 ft. 3 in – 2 pin connections each side with guides & stops
Width (Porch): 23 ft. 4 in.
Width (Substructure Base): 45 ft.
Clearance Under Slip Bowl
Support Beams 15 ft. (approx).
Roading Height: 12 ft. 6 in. (approx)
Setback Capacity: 300,000 lbs.
Slip Support Capacity: 500,000 lbs.Slip Support Table Opening: 20-1/2 in.
Mud Boat:
Material
One (1) S&S manufactured Mudboat with provisions for tie down at the front and rear of the trailer. This unit includes steel checker plated tire guide rails. Ramp comes complete with all pins, turnbuckles and lugs to pin to load beam. With independent ramp. Bar grated center, weighted, full plate underneath, seal welded.
Integrated Skidding System
Mechanical actuated claw indexing with minimal handling
Two foot (2’) incremental skid cycle
Skid rail to accommodate 80’ inline skid
*note skidding system raises floor height (1) foot when utilized.
Hydraulic supply can be ran off of either Top Drive PU or Rig Carrier.
Load Beam with Mast Pedestal
One (1) S&S manufactured load beam, to match the mast loading requirements. Load beam to be plated on top and bottom with plugged drains for each compartment. Load beam comes complete with mast pedestal, all pins, turnbuckles and lugs to pin to substructure.
Mud Pumps:
(2) Sichuan-GAOSHFNG Model JF-1600 Chinese Triplex Mud Pump S/N# LLF01450 with Cat 3512 diesel engine, air clutch, air starter, V-belt drive, safety shut down system, pulsation, quick change caps, lubrication system, centrifugal charge pump, mounted on an oilfield skid base. In good condition showing 11,200 hours on February 2014.
Well Control:
Horn Spherical 11” 5000 psi annular b.o.p.
Horn LWS 11” 5000 psi Double Ram b.o.p.
Koomey Type 120 6 station accumulator w/ remote
Cameron 5000 psi choke manifold
Rig Houses:
8’ x 22’ Top Dog house w/lockers and storage (skids with the rig)
10’ x 40’ Change house w/ 12’ parts room skidded
10’ x 20’ Mud House Skidded
8’ x 8’ Pin box for storage of all rig-up pins & skidding controls
10’ x 30’ Junk basket
Mud System:
2 pit, 780 bbl mud system, 10’ x 50’x 7’-8” w/ (7) agitators
(2) Swaco Mongoose shakers
Swaco 10 cone Desilter
Swaco 2 cone Desander
Water/Fuel Tanks:
10’ x 40’ 500 bbl water tank w/(2) 2” x 4” centrifugal pumps
8’ dia. By 40’ L 12,400 gallon fuel Tank w/ transfer pumps and filter system equip with hoses for supply to all engines.
Handling Tools:
OWI Kelly spinner
4-1/2 250-ton elevators
3” x 108” 250 ton elevator links
4-1/2 250 ton DP slips
OWI pipe spinner
Web Wilson 4-3/4 to 10-3/4 manual tongs
Complete set of rig tarps
Martin Decker 400,000 Lb. weigh Indicator
Martin Decker 6-1/2” tong torque gauge.
4 sets of pipe racks
| |
| |
|
Id: 9000-402
 Cabot 900 Series - 900hp Drilling Rig for Sale
Worldrigs ID: WR252 Description:
Cabot 900 Series
Refurbished 2013
900 HP, 350,000#
Country: USA
Carrier and Drawworks :
Consisting of Model 2346 single drum drawworks, Parmac V-80
assist brake and rotary drive. Two Caterpillar 3408 475 hp ea. diesel
engines powering drawworks, rotary drive and roading chassis.
117’, 350,000# API capacity telescoping mast includes racking board
and hydraulic catworks. Mounted on Cabot 900 series chassis.
17’ telescoping type substructure with pipe slide, BOP dolly and
track system.
Model 2346 Drawworks :
12” x 46” brake rims, 23” x 44” drum barrel. 60,000# single line pull 30”
2-plate clutch. LeBus type grooved jacket for 1-1/8” wire line. Includes
turn back rollers. NEW & REBUILT
Assist Brake :
Parmac V-80 brake with overrunning clutch. Includes supply and
discharge water manifold with air operated supply. Inlet and outlet valves.
Driller’s console includes air pressure regulator for brake modulation
control and hand valve control of friction brake function. NEW
Water Manifold :
Water inlet circuit from hammer union alongside rig to assist brake and to
water circulating brake rims. Control valve in assist brake inlet line
modulated by hand valve at driller’s control. Independent discharge line
from assist brake and rim brakes to hammer union alongside rig.
Charge Pump :
3 x 4, 11-3/4” impeller, 1150 RPM, 15 HP, 55’-70’ total head and 350 GPM
maximum volume required. NEW
Reservoir :
60 BBL volume built inside water tank for extra cooling. NEW
Driller’s Console :
Located at 17’ high elevated position with folding platform hinged to mast.
Pneumatic control for drum clutch, engine throttle, engine emergency
shutdown, transmissions and rotary clutch also included. Stairs with
handrails form platform to carrier walkway. Mechanical controls located
adjacent to controls for drawworks brake. NEW
Cabot Carrier Model C9-962-300 :
Triple axel front, triple rear axel carrier with 12 x 4 drive, 300” wheel base
(bogie center to bogie center). High strength steel fabricated frame. Eaton
EFA-22T5 triple axles (66,000# service rating) with 16-1/2” x 6” air brakes
on all wheels and with spring suspension. Eaton DP480P double reduction
powered tandem and NeWay air suspension leading third axle, all with 16-
1/2” x 7” air brakes, walking beams suspension an powered tandem
(68,000# service rating). Has spring safety brakes mounted on two
powered axles. Six 18:00 x 22.5 16-ply nylon highway tread front tires
and twelve dual mounted 10:00 x 20 12-ply all purpose rear tires. Ross
503 steering with Garrison hydraulic power assist. One-man cab with
heater, defroster, two bus type rear view mirrors, driver’s instrument
panel, adjustable bucket seats with shock absorber mounted and seat
belts. Mechanical support legs, 2-sets required (2 legs per set), rear and
midship for greater lateral stability. One 125-gallon roading fuel tank with
float valve for inlet from location fuel supply, one tool box, clearance and
directional lights, tow bars front and rear.
Walkway and Stairs :
Includes walkway alongside of unit on driller’s side extending from rear
of unit to engine area. Stairways stairs including handrails. NEW
Deadline Anchor :
Hercules 118 type wire line anchor.
Front Guy Line Anchorage :
Guy lines anchor to front of carrier. Includes wireline, tail chain, forged
steel boomers, thimbles and clamps.
Drawworks Power :
Two Caterpillar 3408 475 hp ea. Series Diesel Engines. No. 1 engine
equipped with Allison CLBT-6061. No. 2 engine CLBT -6061 torque
converter transmission with lock-up providing five forward and one
reverse speed. Each engine equipped with variable speed governor, belt
driven Bendix V-1000 (24 CFM) air compressor, horn warning system for
high water temperature/low oil pressure, commercial silencing muffler, dry
type air cleaner, air starters, and engine instruments. REEBUILT -0- HRS
Specifications :
Basic Output : 475 HP per engine at 2100 RPM; Total HP 950
Cooling : Radiator with suction fan
Starting : Air
Transmission Speed : 5 forward, 1 reverse
Shift Control : Air over hydraulic with air position indicator
Drawworks Drive :
Allison CLT-6061 and CLBT-6061 combination torque converter
transmission, each driving through Model 450 right angle drive to
drawworks final drive compound. 5 forward speeds and 1 reverse to
drawworks and rotary. REBUILT
Rotary Drive :
Heavy duty propeller type drive for rotary table through 27-1/2” size.
Includes full air rotary clutch, herringbone reduction gear and oil bath
chain elevated rotary drive from drawworks to rig floor. Elevated drive
hinge mounted. REBUILT
Easy transport and rig-up on rig carrier. Chain drive always
remains made up.
Specifications: (With Typical 3.75:1 Ratio Rotary Table)
Maximum Rotary Table Speed – 220 RPM
Rotary Speeds – 5 Forward and 1 Reverse
Elevated Rotary Drive Chain – 1-1/2” Two Strand
Propeller Shaft – Spicer 1880 final Drive, Spicer 1810 ahead of Elevated Drive
Rotary Clutch – Two Plate 18”
Hydraulic Power :
36 GPM 2000 PSI (maximum) Pressure system, provided by either of two
pumps. Tong selector valve and throttle control at driller’s position.
Wire Line Capacity: 335’
Max Pull: 8,800# (1st layer)
Max. Speed: 95 FPM (At 35 GPM) (1st layer)
Mast :
117’, 350,000# Capacity, telescoping open face structural mast with legs
of cold drawn AISI seamless alloy heat treated steel tubing. Constructed
in two sections, the upper section telescoping into the lower section for
over the road position. Adjustable support screws in mast legs; folding
ladder, level and tilt indicator. MAST IS REBUILT AND HAS MPI INSPECTION
Crown Block Assembly :
Integral type, welded box construction drilling crown assembly. Five 30”
sheaves and one 36” offset sheave for fast line. 1-1/8” grooving ALL NEW
BEARINGS
Crown Nest :
With guard rail and expanded metal floor
Hydraulic Mast Raising, Lowering And Extending Mechanism :
Two double acting, three stage telescoping type hydraulic rising and
retracting cylinders. Upper mast section extending with two extending
cylinders. Additional to mast hydraulics for dtwo engine rigs so that
earthier engine of two engines rig may be used for hydraulic power
functions. Includes pump, drive, manifolding, lines, control valves, oil
reservoir and fluid. NEW
Mast Support :
At front and rear of carrier, supporting mast in over-the –road position.
NEW
Racking Board :
Heavy duty welded construction with derrick man’s platform of expanded
metal. Side-mounted racking fingers furnished to facilitate uniform racking
and prevent swarming. Has locking pins at open ends. Maximum capacity
10,300’ of 4-1/2” drill pipe (6-1/2” tool joints) and automatic unfolding
and folding of the Racking Board during extension and lowering of upper
section of mast
Wind Guys :
One set wind guys consisting of two 3⁄4” cables from crown and two 9/16”
cables from racking board. Each equipped with 10’ tail chain. Used on
Cabot cross type substructure.
Rig Base :
9’ wide x 40’ long x 6-1/2” deep. Structural steel covered with 1⁄4” plate
top and bottom, complete with access hinged and loading capabilities.
NEW
Substructure :
Cabot “T” Type 17’ high “Scoping” Substructure.
Features -
Derrick base and rig base 11’ x 13’ x 15’ with 5000 psi mud lines, BOP cart
and rails, stairs, walkways, safety railings, V-door ramp, and catwalk.
Maximum rotary (casing load) is 450,000 lbs. simultaneous with a setback
load of 200,000 lbs. for a total of 550,000 lbs. substructure capacity.
Generator House :
1 - 2010 Generac Series SD500 (500 KV AC) generator set powered by 16.12
liter Volvo diesel engine with 637 hours. Electric started, radiator, gauges,
power manager digital control platform.
1 - 2500 Cat SR-5 455 KW Ac generator, rebuilt. Powered by Cat 3456 691HP
engine with electric starter, gauges, Cat EMCPII diagnostic system, skidded.
1 - Sullivan Palatek rotary screw air compressor powered by 30HP electric
motor with air tank.
All of the above mounted in 9’9” wide X 42’ long utility house with 2010
Square D motor controls and switch gear with EGS 75KV A transformer,
safety florescent light, skidded.
Power Mud Pumps :
1 - Sentry S1-1000, 6 3⁄4” x 10” with quick change fluid end with pressurized
lubrication system (1 1⁄2” x 2” lines wash pump) with electric 5” x 6” x 12”
charge pumps with Sentry pulsation dampeners, 3 -5000psi relief valve, 3”-
5000psi pressure gauge all powered by 2010 Detroit Diesel 12V2000 engines-
1050 HP each, air volume tank, diesel day tank, oilfield type master skid.
1 – Gardner Denver PZ-8 with quick charge fluid end, pressurized lubrication
system; pulsation down power, 3” 3000 psi relief valve, 3000 psi pressure
gauge powered by CAT D-398 with air starter, air volume tank, diesel day
tank, oilfield mater skid
3 Tank Mud System (700Bbls) :
Shaker Tank -
4’ high x 9’8” wide x 32’ long mud shaker tank with 2 compartments.
7 1⁄2 HP mud agitators, 2- Derrick FLG-503 linear motion shale
shake, 580gpm, 8 cone Odrill desilter, top mounted walkways,
stairs, safety rails and safety florescent lights, All oilfield skidded.
Desander Tank -
4’ high x 9’8” wide x 42’ long mud desander tank with 2 compartments, 2 -
5hp mud agitators with 10’ electrical control room, for starters and control
panels. 2-60hp 5’x6”x11” centrifugal pumps, All top mounted walkways,
safety rails, and safety florescent lights. All oilfield skidded.
Suction Tank -
4’ high x 9’8” wide x 31’ long mud suction tank with 2 compartments, 1-5hp
mud agitator, 2 60hp 5”x 6”x14” centrifugal pumps, 10’ porch with mud
mixing hopper and electrical florescent lights. All oilfield skidded.
Rig Houses :
Top doghouse-10’ wide x 40’ long with benches, 12 lockers, tool and bolt
room, knowledge box, Satellite Auto Driller, Martin Decker 3 pin geolograph
recorder, 2-220Volt electrical heaters, insulated, safety florescent lights,
windows, covered porch, with electrically lowered stairs and landing with
safety rails. All oilfield skidded.
Water tank- 9” high x 10’ wide x 42’ long with 8’x 10’ storage room with high
pressure Cat wash down pump, water pump, 1-220 volt electric heater, has 4
hydraulic cylinders with control valve to raise and lower top dog house, safety
florescent lights. All oilfield skidded.
Fuel/Accumulator Trailer :
53’ Aluminum step deck 2 axle spread trailer with 3,500 Gal. Baffled fuel
tank, Cameron 5 station 8 bottle closing unit with electric Cat triplex pump.
Skid mounted. Five Star wireline retrievers with line capacity of 15,000 ft.,
depth measuring counter hydraulic control with 15hp electric motor, oil caddy
for motor oil, hydraulic oil and gear oil, used oil tank.
Blowout Preventer :
1 - 11” 5000Lb. Shaffer Style (U.S. Casting) studded 4” and 4 1⁄2” pipe and
Blind rams.
1 - 11” 5000Lb. Shaffer Annular studded top, flange bottom
Choke manifold with two manual chokes
Handling Equipment :
4 – New pipe tubs
1 – New center tub with catwalk and V-door
1 – 40’ x 4 1⁄4 Hex Kelly with split master bushings NEW
1 – Varco Hydaulic spinner with forward and reverse
2 – BJ type B rotary tongs with heads to 9 5/8”
1 – BJ 4” Bottleneck drill pipe elevators
1 – BJ 4 1⁄2” Bottleneck drill pipe elevators
1 – 5 1⁄2” casing elevators
1 – 7” casing elevators
1 – 8 5/8” casing elevators
1 – Set each 4” and 4 1⁄2” drill pipe slips
1 – Set each 5 1⁄2”, 7”, and 8 5/8” casing slips
2 – Elevator links
1 – Tong line pull gauge
1 – All mud hard lines, vibrating lines, Kelly hose
12 – Fire extinguishers
Rig is refurbished with all new parts and has only drilled 5
wells since going to the field.
| |
| |
|
|
|
Id: WR935
 Crown 750 Trailer Mounted Drilling Rig for Sale
Worldrigs ID: WR935 Description :
General Description :
Make : Crown
Year Built/Rebuilt : 2006
Rated HP : 750
Mast :
Height : 118ft Guyed
Static Hook Load Capacity : 350,000#
Mast Racking : 4-1/2"Pipe
Substructure :
Style : Scoped
Height : 16.00 ft
Drawworks :
Make : Crown
Power Rating : 750 HP
Input Power : 2 Cat C-15
Power Generation :
Engines :
2 john Deer
6Cyl
Generators :
2 Marathon
400KW
Mud System :
Mud Pumps : 2 1000 HP
Model : F 1000 Triplex
Pressure Rating : 5,000 psi
Shale Shakers : 2 Derrick Linear
Desander : 2 Cones
Desilter : 12 Cones
| |
| |
|
Id: WR516
 Drillmaster 1200 Drilling Rig for Sale
Worldrigs ID: WR516 Description :
Drawworks :
Drillmaster 1200M new (2009) single drum drawworks, 1200hp
Lebus grooved for 1-1/4" Drilling line, hydraulic operated makeup
& breakout winches, over-running clutch, Air driller's console,
crown-o-matic standard chain drive for rotary table
Compound :
2-Engine, In-line compound for rotary & drawworks drive.
Brake:
Superior a section 60" hydromatic brake
Drawworks Power:
No.1-Caterpillar C-18 diesel engine S/N# WJH01256,
600hp rated, w/24 volt electric start, radiator, guages,
Allison S-6610 6 speed transmission air clutch
Hours# 18,307
No.2 - Caterpillar C-18 diesel engine S/N# WJH01260,
600hp rated, w/24 volt electric start, radiator, gauges,
Allison S-6610 6 speed transmission air clutch
Hours# 17,854
Hydraulic power unit 40hp for tong winches and boom line winch
Mast:
Drillmaster New 2009 SN#09864 20'1 1"W x 136'H Cantilever mast,
with a gross nominal capacity of 915,000 Lbs. and a 650,000 Lb. static hook load,
Max wind 91 knots,
with ten (10) lines. Crown block w/ (5) 42' Sheave cluster & 1-56" fast line sheave
grooved for 1-1/4" diameter drilling line.
Each crown sheave wire rope groove is flame hardened.
Each crown sheave is fitted with Timken roller bearings and grease seals.
Derrick compete with Crown safety platform, 20 finger racking board W/ electric mule,
Bridal lines, tong counter weights, survey line sheaves,
Tugger sheaves, Ladder, Derrick climber, Geronimo line, 4" standpipe &
manifod and Derrick stand.
Last certification 8/23/2009
Substructure :
Drillmaster New (2009) 29'10"W x 20'H x 48'8"L
(4) Box-on-box substructure w/rotary beams, V-door ramp,
stairs, (2) air reciever tanks, National deadline anchor, Hydrualic power unit 40hp,
Safety rails, inside Catwalk trolley, 7'W x 14'L built in tool room (ODS) (3) stairs,
Outside wall Winterized, Jacking door, 12' x 12' setback spreader, interval stairway,
Vapor proof lighting, Skidded with oilfield tail rolls
Pump : (Primary)
CNPC Equipment F-1000 triplex mud pump news 2009,
S/N BZ11-040E, 1,000 hp.
w/ LANZOU Pulsation Dampener
MF 5,000 Psi. Pressure Gauge
Five Star 6" x 8" x 14" charging pump p/b TESCO 75hp. electric motor,
Chinese 3"Shear Relief Value, Master skidded w/ (2) Engines belt compound
Pump Power
Caterpillar C-18 Diesel Engines S/N WJHO1709,
575 hp w/24 Volt electric start, Radiator, gauges, V-Belt Drive Eaton 18CB500
Air Flex clutch, Mounted pump master skid.
Hours # 14,911
Caterpillar C-18 Diesel engine S/N WJH01683,
575 hp w/24 Volt electric start, radiator, gauges,
V-belt drive Eaton 18CB500 Air flex clutch,
Mounted pump master skid
Hours#14,859
Pump (Secondary)
CNPC Equipment F1000 triplex mud pump new 2009,
S/N BZ11-024E, 1,000hp.
w/ Lanzhou pulsation dampener,
MF 5,000 psi. Pressure gauge
Five star 6" x 8" x 14" charging pump p/b Worldwide 75hp. Electric motor,
3" Shear relief valve, Master skidded w/ (2) Engine belt compound
Pump Power
Caterpillar C-18 Diesel engine S/N WJH-1696,
575 hp w/24 volt electric start, Radiator, guages,
V-Belt Drive, Eaton 18CB500 Air flex clutch,
Mounted pump master skid.
Hours# 14,209
Caterpillar C1-8 diesel engine S/N WJH-1713,
575 hp w/ 24 volt electric start, radiator, guages,
V-Belt drive, EATON 18CB500 Air flex clutch,
Mounted pump master skid.
Hours#14,209
Rotating Equipment:
Rotary table
Liberty RT-275, New 2009, complies with API split master bushing,
W/ chain drive sprocket, 500 ton capacity
Swivel
Ideco 450
Kelly
5-1/4" x 42' Hex Kelly W/ HDS kelly drive bushing
Kelly Spinner
OWI 1500 Kelly spinner S/N 00474B w/ (2) Air Motor,
Kelly Valves
Upper Kelly Valve.
Lower Kelly Valve.
Traveling Equipment
Sentry rig equipment company
350 Ton capacity new 2009
4G350 travelling block w/ (5) 36" sheaves, 1-1/4" line,
Unitized "hydra-hook" 350 ton capacity
Blowout Preventer and valves
1 Each -13-5/8" x 5000# Jiangsu Xianz Hong Petroleum
Double Gate BOP,Top & Bottom stud configuration
Including - 1set of 5" pipe rams blocks & 1set of Blind Rams,
With 2 - 4" outlets on each side of body of BOP
1 Each - 13-5/8" Shaffer Annular BOP
Includes rubber element
1 Each - 13 5/ 8" x 5000# Type D Drilling spool W/ -2" Side outlet & 3" Side outlet
(Matched to choke manifold
1 Each - choke manifold - 3" x 5000# complete
Inc-steel Flex line W/ Flanges to connect to BOPs or drilling spools
Closing Unit
2008 Jiangsu Xianz Hong Petroleum Model FXQ640-6
Closing Unit Accumulator, 6 station,
Rig floor controls and minitor panel,
Complete W/15 bottles, 30 hp Cat 3517 charge pump, 2 Air pumps, & set up for
Nitrogen bottle backup
Suitcase closing Unit skid 7'-1 0" x 35' with junk basket
Choke Manifold and Valaves
Jiangsu Xianz Hong Petroleum Choke manifold w/ (1) -way cross, (3) 4-1/16"x5M
Gate valves, (4) 2-9/16" x 5M gate valves, (1) Manual adjustable chokes,
Hydraulic adjustable chokes,
Mounted oil field skid.
W/ 2 kill valves- & 2-choke valves mounted at drilling spool
Rig Houses:
Dog house,
Drillmaster 9'1 1"W x 39' 1 1"L
Doghouse/change house combination w/ 17;5"L
Driller's house w / knowlegde box (5) lockers, bench storage, Heater, Lights.
5'L Breezeway, 1 7'5"L Change house, w/bench storage,(16-Lockers,
Cabinets, Heater & Lights. Oil Field skidded.
Generator/Utility Houses
Drillmaster 1 1'10"W x 37'9"L x 11' 6"T
Utility House wLights, Oil field skidded to include the following items.
No #2 380 Kw. AC Caterpillar Generator package powered by Caterpillar C-15 diesel
engine S/N JRE01970 w/ 24 volt electric start, Radiator, HD Air cleaner guages.
Marathon 572RSL4025 Generator end SN# 554268-1106, complete with oil field skid.
Hours# 14,574
No. 1 Gardner-Denver EBE99N New 2006
Electro saver II rotary screw air compressor S/N# S237421,
P/b Toshiba 30hp. Electric motor, mounted 240 gallon horizontal tank.
Hours# 14,128
No.2 Gardner- Denver EBE99N New 2006
Electro Saver II Rotarty screw air compressor S/N# S237419,
P/b Toshiba 30hp. electric motor, mouted 240 gallon horozontal tank.
Hours# 14,400
Siemens Interlock panel, 600 Amp 480 volt main lockout disconnects breakers,
Allen Bradley electrical load center & breakers,
Square D 225 amp 240 volt panel with breakers
Square D 75KVA transformer 480 volt to 240 volt
Drillmaster 7'9"W x 13"H x 43'1"L Electrical suitcase
Drillmaster 2'5"W x 1 3"H x 36'3"L Electrical
Suitcase.
Mud System :
Drillmaster 9'6"W x 7'H x 34'5"L, 394 Bbl. Suction tank
10'L covered porch, (3) compartments,
(3) Max 2000 mud agitators p/b TECO 25hp. electric motors,
Sloped bottom, top mounted walkways, safely rails, lights, oil field skidded.
Five Star 6" x 8" x 14" centrifugal mixing pump S/N 5284, p/b Baldor 75 hp.
Electric motor.
Five Star 6" x 8" x 14" centrifugal mixing pump S/N 5284, p/b Baldor 75 hp.
Electric motor.
With internal jetting system, 3 dump gates.
drillmaster 9'6 "W x 7'H x 34'7"L, 394 Bbl. shaker tank
10'L covered porch, (3) Compartments
Max 2000 mud agitator agitators p/b TESCO 25 hp. electric motors,
Sloped bottom, top mounted walkways, safely rails, lights, skidded.
With internal jetting system, 3 dump gates.
Five Star 6" x 8" x 14" centrifugal mixing pump S/N
5269, p/b Baldor 75 hp. electric motor.
Five Star 6" x 8" x 14" centrifugal mixing pump S/N
5283, p/b Baldor 75 hp electric motor.
Shale shaker, Shaker, Fluid Systems Inc., Single screen,
Linear motion shale shaker S/N2450,
Shale shaker, Shaker, Fluid Systems Inc., Single screen,
Linear motion shale shaker S/N3089
NOI DSN-ZH-10CTX Desander S/N 8714-5732,w/ (2) 10" cones.
NOI DSL-10GG-4CTX Desilter S/N 8714-5731,w/ (10) 4" cones.
Drilco "Deep Pit" Degasser p/b TESCO 10 hp. electric motor
Bubble Buster: Geothermal type bubble buster
Mud House
Drillmaster 9' 1 1"W x 26'L Mud house w/mud house w/mud hopper,
Test sink, ventilation, fan, electric heater,
Lights, double side door, (2) end doors, skidded. Inculdes 7'H Tri-stand on one
end the other end sets on suction tank.
Fuel Tank
Drillmaster 7'1 1"Wx8'Hx30'L, 13,860 gallon fuel tank
w/(2) AMT 1/2 hp. fuel transfer pumps p/b Baldor 1/2 hp. electric motor,
With three (3) compartements, combo lubester oilfield skidded.
Water Tank
Drillmaster 10'10"W x 8'1"H x 35'L, 529 Bbl. Water tankx
w/ 10'L covered extension, pump room, oilfield skidded
Five Star 3"x4"x1 1" Centrifugal water Pump
S/N 5420, p/b Tesco 20 hp. electric motor
Five Star 3"x4"x1 1" Centrifugal water pump
S/N5267, p/b Tesco 20 Hp. Electric motor.
Instrumentation
Weight indicator
Mud guages.
Ancillary Equipment:
Drillmaster 5'W x 2'4"H x 60'L, 2-Section catwalk w/ steel deck and stands for string blocks
Pipe racks 5 sets 29" x 30'1 set 29" x 12' 1 set 41" x 30'
Five Star 'Retriever" electric measuring device S/N 862, w/ 15,000 Ft. of. 092
Wire line
2 sets drill pipe elevators 5"
2 sets of drill pipe slips 5"
2 sets drill collar slips 7" & 9"
2 sets tongs with all head for pipe & casing
2 sets of safety clamps
Mud box
108" 4" elevator bails
Crossover, bottom hole, lifting subs
Air hoists air wrench, Model HUL40, S/N-REM10370, 9000 lb. pull rating
Air hoist air wrench, Model KSUL, S/N-REM13962, 10,500 lb. pull rating
4,000 ft. of 1-1/4" drill line, mounted spooler stand
3-1/2" x 5,000 Psi. rotary hose
Vibrator hose 2 each 3 1/2" x 18'
Rat hole
Mouse hole
8 rig matting boards
Small hand tools & wrenches
Fluorescent & mercury-vapor rig lights & wiring explosion proof
Atco office/ living shack all electric w/ oil field skid
| |
| |
|
Id: WR815
 Alta 1500 HP AC/VFD Drilling Rig for sale
Worldrigs ID: WR815
Mast
Clear Height : 142’
Max. Static Hook Load (12 Lines) : 800,000 lbs
Max. Wind Capacity : 75 knots
Substructure
Floor Height : 25’
Clear Height : 20’-6”
Rotary Capacity : 800,000 lbs
Setback Capacity : 600,000 lbs
Hole Opening : 37-1/2”
Top Drive
Max. Static Hook Load Rating : 500 tons
Max. Speed : 265 rpm
Max. Intermittent Torque : 71,000 ft-lbs
Max. Continuous Torque : 51,400 ft-lbs
Pressure Rating : 7,500 psi
Drawworks
Rated Capacity : 1500 hp
Max. Capacity (12 lines) : 800,000 lbs
Drum Groove : 1-3/8”
Mud Pumps
Input Horsepower Rating : 2,200 hp
Maximum Pump SPM : 120 rpm
Maximum Liner Size : 9”
Minimum Liner Size : 5”
Stroke : 14
Power Generation
Generator Power : 1350 kW @ 1200 rpm
Engine Power : 1476 HP @ 1200 rpm
| |
| |
|
|
|
Id: WR968
 Ingersoll-Rand T3W Drilling Rig - For Sale
Worldrigs ID: WR968
Description :
1988 Ingersoll-Rand T3W Drill Rig
Cummins 855 Diesel Deck Engine
IR HR2 825 CFM / 350 PSI Air Compressor
240 ft of (20ft X 4-1/2" O.D.) Drill Pipe Included
Pipe Rack
Hydraulic Leveling Jacks
Mounted on a 1988 International Truck
International Diesel Engine
Working Condition - Ready To Drill
Location : SE Region
| |
| |
|
Id: WR634
 700HP Super Single Rig for Sale
Worldrigs ID: WR634
General Description
Estimated Drilling Depth : 10,000 ft
Estimated Rig Move Loads : 22
Estimated Camp Move Loads : 4
Rated HP : 700
Mast
Height : 80.00 ft
Static Hook Load Capacity: 300,000 lbs
Mast Racking Capacity : N/A
Substructure
Style : Parallelogram
Height : 15.00 ft
Clear Height : 13.00 ft
Casing Capacity : 300,000 lbs
Maximum Setback Load (lbs.) : 300,000
No Drawworks
Top Drive / Power Swivel
Make : Foremost
Model : F 150 T
Capacity : 150 Ton
No Swivel
No Rotary Table
Power Generation
Engines : 2 ea. Detroit Diesel Series 6063HV35
Generators : 2 ea. Stamford Power System HCI534DIL
SCR / VFD / DC/DC : Rack & Pinion Rig
Enhancements
Forklift : Caterpillar 930 H
Forklift : Caterpillar 930 H
Iron Roughneck : Canrig Drilling Technology TM80-110-12-X-WX/PCS
Power Slip Frame : TTS Sense 83415-04
Mud System
Mud Pumps : 2 ea Hong Hua HHF-1000
Power Rating : 1000 hp @ 140 spm
Reserve Mud Volume : 0 bbls
Pressure Rating : 5,000 psi
Active Mud Volume : 700 bbls
Shale Shakers : 2 ea. Derrick Corporation FLC 504
Desander : Derrick Corporation 10" x 3 Cones
Desilter : Derrick Corporation 4" x 16 Cones
Mud Cleaner : N/A
Centrifuge : N/A
Well Control
Annular : 11" 5,000 psi, Townsend, Type 90/19012-11-5
Double Ram : 11" 5,000 psi, Townsend. Type 82/5
Choke Manifold : 2 1/16" 5,000 psi
BOP Closing Unit : Control Technology, 5 Station 3,000 psi
| |
| |
|
Id: WR967
 Schramm T64HB Drilling Rig - For Sale
Worldrigs ID: WR967
Description :
1977 Schramm T64HB Drill Rig
40,000 lbs of Pullback
450 cfm / 250 psi and 600 cfm / 100 psi Sullair Air Compressor with
Supercharger (3000 hours since rebuilt)
Detroit 8V71 Diesel Deck Engine (1000 hours since rebuilt)
Hours on Rig are unknown
Gardner Denver 5x6 Mud Pump (Air Operated)
4 Rod Lazy Susan Rod Holder
Includes 4 of 4-1/2” x 20ft 6” Drill Rod with 3-1/2” API Reg Threads
Includes 10 of 3-1/2” x 20ft Drill Rod with 2-7/8" IF Threads
Meyers 2 Cylinder Water Injection Pump
5” & 6” Hammers Included
Comes with Basic Tooling
Mounted on a 1976 GMC 6500 Truck with 62,000+ miles
Gas V8 427 Engine
Location : USA
| |
| |
|
|
|
Id: WR1073
 Schramm T660-H Drilling Rig - For Sale
Worldrigs ID: WR1073
Description :
1989 Schramm T660-H Drill Rig
Cummins 855 Diesel Deck Engine
GHH 900 cfm / 350 psi Air Compressor
Set up for 280 feet of 4.5” drill rods with 4 Rod Lazy Susan carousel
10 Rod rack on the side of the tower
30 ft head travel
Foremost floating sub adapter
Water injection pump
hammer oilier
400 Ft of drill pipe included
Mounted on a 2009 Mack Granite Truck with
485 HP Diesel Engine
18 speed transmission
It has 74,523 km (45,830 miles)
Location : Canada, North America
| |
| |
|
Id: 9000-366
 Spencer Harris 7000 Drilling Rig - 700 hp - for Sale
Worldrigs ID: WR28 Description
Spencer Harris 7000 Drilling Rig
700 HP, Recently Working, Trailer Mounted Rig, +/- 8,000’
Drawworks :
Ideco Hydrair H-35 single drum drawworks
Lebus grooved for 1" drill line
Parmac Triple 15" hydromatic brake
Torque-tite make-up and break-out catheads
Rotary drive attachment
Rotary drive clutch
Drawworks power :
Cat D3306t diesel engines, electric start : 2
Twin sisc F10017tci torque converters : 2
Two engine compound : 1
Air reservoir tank : 1
Derrick :
Spencer Harris derrick
96' H, 250,000 Lb. capacity
Hydraulically raised
Wire line telescoped
Crown block assembly
Racking board
Standpipe
Vapor proof lighting
Substructure :
Spencer Harris single piece substructure
9' height
Stairs
Handrails
Vapor proof lighting
Rotary beam clearance : 6' 4"
Oaw : 17'
Oal : 28'
Mounted and unitized on a master oilfield skid
Back-On ramp :
Spencer Harris back-on ramp
35" h
7' 7" w
31' 5" l
Rig trailer :
Spencer Harris triple axle trailer, S/N 28
Front hydraulic mounted leveling jacks : 2
Tires : 10.00 x R20
Budd wheels
Inverted 5th wheel
Rotary table :
Mud King Rt-175 rotary table : 17 1/2" x 44" centers
Split square drive master bushing
Kelly drive bushing :
Kelly roller drive bushing
Square drive for 4 1/4" Square Kelly
Block / hook :
Traveling block with unitized hook
Mckissick 4-30" sheave block
BJ 6150 unimatic hook : 150 ton capacity grooved for 1" wire line
Rotary swivel :
Oilwell 100-C rotary swivel : 100 ton capacity
6 5/8" Reg. L.H. connection
Elevator links :
2 1/4" x 96" Elevator links : 250 ton capacity
Mud pump # 1 :
Hh Ht-800 (F-800 Style) triplex pump
S/N Ht20060067 (Dom: 2006)
6 3/4" maximum liner size
8" maximum stroke
Forged steel fluids
Quick change caps
Lanzhou Kb-45 10 gallon 5,000 psi pulsation
Dampener
O'drill/MCM 3" 5,000 psi pressure relief valve
O'drill/MCM 4" 5,000 psi gate valve
Mission 5" x 6" x 11" centrifugal pump (Pinion driven)
Odrill/Mcm 1" x 1 1/2" liner wash pump (Pinion driven)
Pump drive sheave (Bullwheel)
Pump pedestal drive
Belt guard
Suction and discharge hoses
Power : Caterpillar D398b series diesel engine S/N 66b2463
Air start
Radiator
Air clutch
Clutch guard
Engine drive sheave
Instrument panel
Diesel day tank (Filled from main tank)
Air receiver tank
Vapor proof lighting
Mud pump # 2 :
National C-250 duplex pump
7 1/4" maximum liner size
15" maximum stroke
Mattco steel fluid end
Quick change caps
Air chamber
O'drill/CM 4" 5,000 psi gate valve
Liner wash pump (Pinion driven)
Pump Drive Sheave (Bullwheel)
Pump pedestal drive
Belt guard
Pedestal mounted crane JIB
Suction and discharge hoses
Beaver Strainer
Power : Caterpillar D3406b series diesel engine
Air clutch
Clutch guard air
Start instrument
Panel
Mounted and unitized on a oilfield master skid
Doghouse :
7' h x 8' w x 30" l top doghouse
Cantilever type
With lower junk bin
Knowledge box
Crew lockers
Propane heaters
Mounted on a oilfield master skid
Mud system :
Single tank mud system approx. 650 Bbl capacity
Compartment : 4
Dimensions :
6' H x 10' W x 63' Oal
Crimped walls
O'drill/MCM linear shale shakers : 2
O'drill/MCM single cone desander : 1
O'drill/MCM 8-cone desilter : 1
O'drill/MCM 5" x 6" x 11" centrifugal charge : 1
Pump powered by 50 H.P. X.P. electric motor
Mud trough
Bottom mud guns
Stairs
Ladders
Handrails
Vapor proof lighting
Clean-out gates
All above mounted and unitized on a 10" H x 10' W x 63' Oal master skid
Generator house :
10' w x 39' l generator house
Complete with the following :
Caterpillar D3306t diesel engine radiator : 1
Electric start
With Kato model 150S x 9E generator
150 kW
187 Kva
208/240/416/480 Volt
3 - Phase
60 Hz
Caterpillar EA150 starter panel
*Above mounted and unitized on CAT rails
Deutz 6 - cylinder turbocharged diesel engine radiator : 1
Electric start
With MECC ALTO SP model Eco 34-2SN/4 generator end
100 kW
125 Kva
277/480 Volt
3 - Phase
60 Hz
*Above mounted and unitized on a master skid
Master control panel
Distribution switch panels
Breaker boxes
Transformer
Metal parts bin storage
Catwalk : 42" h x 55" w x 42' l steel catwalk
Annular blowout preventer :
Annular blowout
Preventer Reagan 10" 3,000 psi W.P.
Flanged top and flanged bottom
Closing unit :
Closing unit
2 - Station
(Mounted on trailer)
Drill pipe :
Approx. 6,000' of 4" F.H. 14.00 Lbs./ft Range II
Grades E and G-105
Pipe tubs : Pipe Tubs : 3, Skid mounted
Drill collars :
(21) 6" - 6 1/8" O.D. X 30' l +- Drill collars
4" F.H. connections
Kelly :
4 1/4" x 40' l Square Kelly with scabbard
4 1/2" X.H. PIN
6 5/8" Reg. box connections
Instrumentation : Automatic driller
3 - Pen drilling recorder
Martin-Decker "Clipper" weight indicator
Handling tools :
Type B rotary tongs, Complete
3 1/2" - 10 3/4" LUG Jaws
Handling tools :
4" F.H. 18° drill pipe elevator
150 ton capacity
6" - 6 1/8" O.D. drill collar elevator
4 1/2" x 4" rotary drill pipe slips
5 1/2" - 7" rotary drill collar slips
Rotary hose : 3 1/2" I.D. x 45' l Rotary hose, 5,000 psi W.P.
Vibrator hose : 3 1/2" I.D. x 15' l Vibrator hoses, 5,000 psi W.P.
Pipe racks : 2 Sets, 42" h x 28' l triangular pipe racks
Drill line :
Wooden spool with 1" drill line : 1
*Mounted on trailer neck
Wireline unit :
Mathey electric/hydraulic wireline unit
092 Wireline
Starter box
Skid mounted
Mud Bucket :
Mud bucket dressed for 4" drill pipe
| |
| |
|
Id: WR754
 Crown Duke CE 750 SD Trailer Mounted Drilling Rig For Sale
Worldrigs ID: WR754
Description :
Trailer / Drawworks :
Model: CE 750 SD,
Date: 2006, S/N: 0391-DW9098-06 p/b Engine # 1, Cat C15 – 535HP,
Date: 2005, S/N: JRE00815, Engine # 2, Cat C15 – 535HP,
Date: 2005, S/N: JRE00810 w/Allison Transmissions w/ (2) Hydraulic
Cat Heads – Make / Break, Air Actuated Brake Bands, (1) Air
Actuated Crown Saver, (1) Eaton Air Flex Brake – Size 224 WCBD
(1) Electric Driven Hydraulic Pump – 75HP, (1) Crown Right Angle Box,
Model: CE 750 SD, S/N: 0233-RA1K454-06, (1) Hydraulic Reservoir –
350 gallons, (2) Hydraulic Winches – Paccar, (2) Hydraulic Raising
Cylinders – Parker, (1) Wire Line Anchor, (1) Drillers Console,
(2) Extension Cylinders, (1) 90 Degree Angle Gear Box, Mounted
on a (4) Axel Carrier Trailer, Crown Section: (3) Sheaves –
1 1/8” x 30”, (1) Sand Reel - 1 1/8” x 30”, (1) Fast Line -
1 1/8” x 36”, (2) Air Hoist Sheaves w/ Finger Board – (24) Fingers,
(1) Block / Hook Combo – 5 Sheaves – 1 1/8” x 36”, Sentry,
Model: YC-UTB-265, (2) Bails – 150 Ton – 91”
Substructure :
37 ½ft Long x 11ft 6” Wide Elevating Pin Subs, (1) Set of Floor Stairs
Generator House :
Engine #1, Detroit 60 Series – 14 Liter, Date: 2005, S/N: 006R0882097,
Generator #1 Magna Max – 380KW, Model: 572 RSL4025, S/N: WA-548363-1205
Engine #2, Detroit 60 Series – 14 Liter, Date: 2006, S/N: 06R0943725,
Generator #2 Stamford, Date / S/N: Tag is Unreadable
Switch Gear With Motor Control Center w/ (2) Air Compressors –
5.2HP – 200PSI – Disco Inc., Model: 9202
Mud Pumps :
# 1, Weatherford MP-10, S/N: W-39, (3) Weatherford Fluid Modules, (1)
PD55 – 5000PSI Pulsation Dampener, (1) Charge Pump – 6 x 5 x 14 – 50HP -
Mission (1) Type D Mud Gauge – 5000PSI, S/N: RB1387, Engine: Detroit 12V
2000, WPT Power Transmission, Power Grip Clutch, Date: 2006, S/N: HJ800A2Q
# 2, Emsco F1000 Type, (3) EMSCO Fluid Modules, (1) PD55 – 5000PSI
Pulsation Dampener, (1) Charge Pump – 6 x 5 x 14 – 50HP – Mission,
(1) Type D Mud Gauge – 5000PSI, Detroit 12V 2000, WPT Power
Transmission, Power Grip Clutch, Date: 2006
Mud Pits :
Shaker Pit - (1) 400 BBL – (3) Compartments, (3) Agitators – 10HP – MCM,
(2) Mud Movers – 6 x 5 x 11, 50HP, Five Star (1) Shaker – Derrick Super
G 503, Model: FLC 503, S/N: MAH009653, (1) Desander: Derrick, 2 Cone,
Model: DSV-10-2, S/N: AD002263, (1) Desilter: Derrick – 16 Cone
Suction Pit, (1) 400 BBL – (2) Compartments, (2) Agitators –
10HP – MCM, (2) Mud Movers – 5 x 6 x 11 – 50HP – Five Star
Mud House, Filled with misc. Mud Pump expendables: Valves, Seats,
Springs, Piston Cups, Piston Rods, Liners, Liner Puller Set, (1)
Caustic Barrel, (1) Hopper, (1) Gate Valve – 5000PSI - Oteco
(1) Fuel Tank – 10,000 gal – (2) Transfer Pumps,
(1) Water Tank – 500BBL –with (2) Transfer Pumps – Double
Life – 3 x 2 x 13 with 25HP Motors w/ Elevating Top Dog House
(1) Change House / Parts House
Well Control :
BOPs: (1) Hydril GK 11” x 5000# Annular, (1) Shaffer Type DBL
11” x 5000# w/ Mud-X dressed w/ Choke and Kill Valves
Accumulator: 2006, Advanced Pressure, 5 Station w/ bypass,
(1) Triplex Pump, (2) Air Pumps, 12 Bottles
Choke:(7) 2” x 5M – MGV, (2) 4 x 5M – MGV, (1) Watermelon
Misc. Equipment :
(1) Wire Line: Oil Works Inc. – 12,000ft x .092, Model: 1200, S/N: MC 72122
(2) Cat Walk Section – 20ft Long x 4ft Wide
(3) Sets of Stairs
(6) Pipe Racks
(2) Lay Down Racks
(1) Kelly Shook
(1) Stand Pipe – 5000PSI
(1) Kelly Hose – 5000PSI – 60ft
(1) Lubester – (3) Compartments
Location : USA
| |
| |
|
|
|
Id: WR928
 New Derex 1340 DR Drilling Rig - For Sale
Worldrigs ID: WR928
Description :
2022 Derex 1340 DR Drill Rig
Stroke 13ft (handles 10ft drill pipe)
Top Drive Speed 140ft/min
Pullback 40,000lbs
Pulldown 20,000lbs
Torque (stall) 42,000 inch/lbs
TD Rotation Speed 0-140 RPM
Lower Drive Torque 180,000 inch/lbs
LD Rotation Speed 0-24 rpm
Casing Diameter 6", 5" & 4" (with 8" & 10" option)
665 CFM / 250 PSI Air Compressor
2,500 lbs Winch
Water & Foam Injection Capacity 8 gpm @ 600 psi
Pre-Order Drill from us
Location : USA
| |
| |
|
Id: WR953
 Atlas Copco RD20 III Drilling Rig - For Sale
Worldrigs ID: WR953
Description :
2006 Atlas Copco RD20 III Drill Rig
Caterpillar C27 diesel deck engine (rebuilt only has low test hours)
Ingersoll-Rand 1250 cfm / 350 psi Air Compressor
Hammer lubricator
FMC water injection 46 gallons per minute at 1500 PSI
120,000 LBS of pullback
Carousel unmounted but included
Mounted on a CCC (Crane Carrier) 5 axle
14,985 miles
Caterpillar C13 diesel engine
Drill pipe cost extra
Location : USA
| |
| |
|
Id: WR933
 Schramm TXD 200 Trailer Mounted Drilling Rig for Sale
Worldrigs ID: WR933
Description :
2007 Model TXD200 Schramm Unit 138 Ser # J135-0106
MTU 12V2000 Engine Ser # 5352005063
Sub Base/Mud Boat 2 Piece 61ft 5"L x 10ft 6"W x 2ft 7"H
Tag Axle Vin # 1K9AL10A872268004
Schramm LoadSafe 2011 Model Unit 7232 Vin# 4S9S1PA25BW276002
Location : USA
| |
| |
|
|
|
Id: WR901
 Hydraulic Super Single TXD 200 Rig - For Sale
Worldrigs ID: WR901 Description :
General
Type : Hydraulic Super Single TXD 200
Year of Manufacturer : 2006
A. General Characteristics
Operating Capabilities
Depth rating with 5 inch Drill Pipe : 2,500m (8,200ft)
Maximum rated static hook load : 200,000 lb (90,909 kg)
Gross Nominal Capacity (lb) : 200,000 lb (90,909 kg)
Maximum top drive load (lb) : 200,000 lb (90,909 kg)
Maximum operating wind speed (kt) : 93
Rig Power System
Main Drilling Unit Engine
Make / Model : Detroit Engine DDC/MTU
Quantity : 1
Prime Power (HP) : 760
Engine Speed (rpm) : 1800
Auxiliary air supply : Kaeser ASD 37
Maximum Pressure : 11 bar
Maximum output : 110 cfm or 3.1 m³/min
Additional equipment : 110 cfm or 3.1 m³/min
Additional equipment : Kaeser TC36 air dryer and airline lubricators
Power supply unit : 1 x Genset 550kVA, 400 volts at 50Hz. Containerised and silenced
Power Distribution : Containerized distribution unit.
Fuel Supply
Rig fuel tank : 2 x 110 gal (415 lt) fuel tanks.
Rig site Diesel fuel tank :
1 No. 30,000 litre bunded tank, transfer pump and supply
manifold. Automated Monitoring with GSM Sim card alerts to fuel
companies and management.
Automated feed system : Rig, Pumps and Rig generator feed from auto fuelling system.
Average fuel consumption : 130-210Lt per hour
Hydraulic System
Quantity hydraulic fixed pumps : 3
Quantity hydraulic variable pumps : 7
All hydraulic circuits are filtered to : 7 microns
System capacity : 798lt (210gl)
Remote Hydraulic Supply
Separate hydraulic pump and controls plumbed to outlet ports with twin quick connect
fittings are mounted to provide hydraulic oil supply for customer’s auxiliary equipment
Maximum Oil Flow : 58 gpm
Maximum Pressure : 5000 psi
Horsepower Requirement : 175 hp approx.
B. Drilling Equipment
Telescopic Mast
Mast height (Max ): 23.7m (78’)
Top drive travel : 50ft
Gross nominal capacity : 200,000 lb (90,909 kg)
Pull-down capacity : 32,000 lb (14,545 kg)
Substructure
Trailer Mounted, Highly mobile configuration complete with automated pipe handler
Full length Sub Base : 16.5m long x 600mm high x 3m wide, Weight: 25 Tonne
Clear height below rotary beams : 3.96m (13ft) Adjustable
Feed Line System
Line size : 2 x 27” PD Nylatron, 1½” OD 8 x 26 Wire Rope
King strength : 128.2 tons per strand
Top Head Drive System
Pipe Handling : Automated
Hoist Capacity : 200,000 lb (90,909kg)
Hoist Speed :
0 - 130,000 lbs. @ 100 fpm
131,000 lbs. - 180,000 lbs. @ 75 fpm
181,000 lbs. - 200,000 lbs. 25 fpm
Pulldown Capacity : 32,000lb (14,545kg) @ 200fpm
Rotary Table
Mast Base : 30” (762mm)
Spider Bowl : Full Circle (FCR)
Slip type : Adapts Cavins Model F Power Slip, 2-” OD to 8” OD
Range : Pneumatic
Power : 400,000lbs
C. Rig Floor Handling Equipment
Automated Pipe & Casing Handling System
Tubular Length : 13.11m (43ft)
Max Tubular Dia : 30”
Slide Travel (ft) : 8
Load Height (inch) : 42”
Size range of Drill Pipe : Up to 10 ¾”
Pipe Racking
Rig racks : Approximately 38 pcs of 4 1/2” OD upset range 2 or 3 drill pipes in one layer.
Separate Racks : 4 No. 8.5m long x 1.07m high
Power Breakout With slips
Range : 4½” - 8” diameter
Maximum clamp force : Adjustable to 47,000 lb
Maximum make-up torque (ft lb) : 53,000
Maximum break-up torque (ft lb) : 53,000
Mobile Breakout system (Scorpion) : 1 unit
Bit Subs
Quantity : 1
Size (inch) : 4½” to 12 ¼”
Bit Subs
Load capacity (lb) : 2,400 kg (5,300 lb)
Drum Speed : 151 – 165 fpm
Located at : Top right hand side of the outer mast
Type of brakes : Automatic spring applied, hydraulic release
Capacity : 150ft (46m) of ½” HSLR cable
Survey Winch
Capacity : 3,300m(10,826ft) x .092” survey line
Max load rating : 3,000lbs
Drill Collar Safety Clamp
Quantity : 2
Size range (inch) : Up to 9 5/8”
D. Mud System
Mud Pumps
Mud pump make / model : White Star /WS 1,000 Quadraplex
Quantity : 2
Output (Combined) GPM/LPM : 6” liners - 1,410 GPM (5,336 LPM)
Liner sizes available (inch) : 4” - 6½”
Pump Motor : Detriot Diesel corporation
Motor rated capacity (HP) : 1,050 HP
Pulsation dampener make / type : White Star 7.5 gallon (Hydril type)
Pressure rating (psi) : 5000 psi
Stand Pipe
Stand pipe type / size (inch) : 4”
Pressure rating (psi) : 5,000 psi
Gauge make / type : Perma-CAL 3 ½” ID x 5,000 psi
Solids Control Equipment
Shale Shaker
Make / Model : Mud Data 803 SD Linear Motion Shale Shaker
Quantity : 2
Vibrating Strength : Up to 8.0G(Adjustable)
Treating capacity (each) : 444 GPM (2,000 LPM)
Screen Area : 2.8m²
Centrifugal Pumps : 4” x 18
Model : Mission magnum
Quantity : 2 x Mix pumps
Flow :
2 x Charge Pumps
1 x Trip tank pump
1 x Drill water pump
Degasser : Poor boy
Mud Mixing
Mud Agitator
Mode l: Siemens
Quantity : 7
Motor Power : 5KW
Speed : 95 RPM
Impeller diameter : 40”
Mud Tanks
Total system volume active, reserve : 640bbl
Mud tank: Shaker : 160 bbl
Mud tank: Settling : 155 bbl
Mud tank: Slug/Pill : 77 bbl
Mud tank: Active : 155 bbl
Mud tank: Pre-mix : 77 bbl
Trip tank : 15 bbl
Water Tanks
Drilling water Storage tank : 22,000lt (160bbl)
Fire Water tank : 44,000lt (280bbl)
E. Blowout Preventer, Control Equipment and Associated Equipment
Annular Preventer
Annular Preventer make / type : White Star /WS 1,000 Quadraplex
Size : 11”
Working pressure (psi) : 5,000 psi
Ram Type Preventer
Double ram BOP make / type : Hydril double 11” x 5000 psi
Size : 11”
Working pressure (psi) : 5,000 psi
Rams for Ram Type Preventer
Variable Rams
Blind Shear Rams : 11” 1 No. set
Fixed-Bore Pipe Rams : 1 No set of each 3 ½”
Accumulator Unit and Controls
Accumulator Unit make / type : 210 Gallon, 5 station, By-Pass Valve,
Air Actuation with Remote Panel
Number / total capacity of bottle (gal) : 12 x 11gl bottles = 132gallon
Test Pump : 1 No 10,000 psi Single Pump Hydrostatic Portable Test Unit with
ITT Barton Chart Recorder
Choke Manifold
Choke manifold make / type :
1 No 3 1/8” DMS 5,000 psi with two manual adjustable chokes
Pressure rating (psi) : 5,000 psi
Drilling chokes quantity : 2 No.
Coflexip Hose for BOP / Choke Manifold
Fire proof, acid resistant, steelbanded flexible hose for connecting
the BOP stack to the choke manifold :
3” x 5,000 psi with 2 No 3″ 5,000 psi, Mc Evoy valves and choke hose
Top Hole Diverter Equipment
Drilling Spool with 8” outlet, 60ft of 8” steel flanged pipe work.
Steel containment tank
G. Drill String
Drill Pipe
3½” S135 Range II Premium NC38 : 220 Joints - 2,000m (6,500ft)
Heavy Weight Drill Pipe
5” x 4½” IF Hard Banded – Range II : 6 No. (180ft)
3½” x 3½ IF Hard Banded – Range II : 6 No. (258ft)
Drill collars
6¾” x 4½”IF – Range 2 : 8 No. (248ft)
4¾ x 3½” IF – Range 2 : 12 No. (372ft)
H. Drilling Instrumentation and Control Equipment
Drillers Console
Schramm iControl
• Weight on bit(WOB)in pounds (lbs).
• Rotation speed in revolutions per minute (rpm).
• Rotation torque in foot pounds (ft-lbs).
• Bit depth in feet(ft).
• Line pressure.
• Air compressor sump pressure.
• Air compressor temperature.
• Hydraulic oil temperature
• All engine information & diagnostic codes.
• All drill rig diagnostic codes in easy to read text
I. Other Equipment
Air Drilling Package(Not inlcuded in day rate)
Schramm iControl
| |
| |
|
Id: WR1044
 Mobile B-61 HDX Drilling Rig - For Sale
Worldrigs ID: WR1044 Description :
1991 Mobile B-61 HDX Drill Rig - S/N: 91009
PULLMASTER Main & RKI Secondary Winches
30ft H Hydraulic Raised Stiff Mast
Integrated Table
Hydraulic Tong Assembly
2005 CUMMINS 3.9L Diesel Engine
HPU
MOYNA Hydraulic Water Injection Pump
Water Tank
Drilling Capacities :
Rotary Drilling with 2-5/8” diameter drill rod…… 1350 ft. (410 m).
= we can provide new drill pipe like this at additional cost
approximately $250 USD per 5 ft. stick.
Core Drilling with AW size tools or AQ wire line… 2250 ft. (685 m).
Core Drilling with NW size tools or NQ wire line… 1350 ft. (410 m).
Continuous Flight-Auger Diameter Range…... up to 14” (355 mm).
Max. Depth w/ 6” Dia. (152.4 mm) Augers…………………………….. 360 ft. (110 m).
Max. Depth w/ 8” Dia. (203.2 mm) Augers…………………………….. 250 ft. (76.2m).
Note: Drilling Capacities are based on maximum depths obtained in
actual field test and will vary with local subsurface conditions.
Mounted on a 1991 INTERNATIONAL 4900 6x4 T/A Truck - VIN-1HTSHN4R3MH371512
IHC 6-Cyliner Diesel Engine
EATON 8-Speed Transmission
(3) Hydraulic Leveling Jacks
10.00R20 Front & 11R22.5 Rear Tires & 210" WB
Dayton Wheels (75,751 Odometer Miles)
Note: If you are wanting to do direct rotary drilling with drill pipe
and roller cone bit or DTH hammer then you will need an add auxiliary
mud pump or auxiliary air compressor. If you do not have mud pump or
compressor then we do have some options in stock we can offer at
additional costs :
Ingersoll-Rand 400 CFM / 200 PSI air compressor, enclosed, trailer mounted.
Ingersoll-Rand 600 CFM / 125 PSI air compressor, enclosed, trailer mounted.
Ingersoll-Rand 750 CFM / 300 PSI Air Compressor mounted on 1996 Volvo
truck p/b Cat 3406E.
Sullair 900 CFM / 350 PSI air compressor, enclosed, skid mounted.
Gardner Denver FXFF 4 x 5 Duplex mud pump p/b CAT 3304, skid mounted.
Gardner Denver FXF 4 x 5 Duplex mud pump p/b Waukesha 4-cylinder diesel
engine, skid mounted.
Location : USA
| |
| |
|
Id: WR1043
 Mobile B61 HDX Drilling Rig - For Sale
Worldrigs ID: WR1043
Description :
Mobile B61 HDX Drill Rig - S/N: 92007
L8 Monyo Water Pump
Cummins 4BT Diesel Deck Engine
12,000 LB Pullmaster Winch
Two AUX Winches
In Out & Side to Side
20,000 FTLB Tourque Transmission "Shift on the Fly" Automatic
Swing Out Auger Racks
Drilling Capacities :
Mounted on a 1992 Ford F-800 Truck - VIN: 1FDXK84A3NVA14295
Rotary Drilling with 2-5/8” diameter drill rod…… 1350 ft.
(410 m). = we can provide new drill pipe like this at additional
cost approximately $250 USD per 5 ft. stick.
Core Drilling with AW size tools or AQ wire line… 2250 ft. (685 m).
Core Drilling with NW size tools or NQ wire line… 1350 ft. (410 m).
Continuous Flight-Auger Diameter Range…... up to 14” (355 mm).
Max. Depth w/ 6” Dia. (152.4 mm) Augers…………………………….. 360 ft. (110 m).
Max. Depth w/ 8” Dia. (203.2 mm) Augers…………………………….. 250 ft. (76.2m).
Note : Drilling Capacities are based on maximum depths obtained in
actual field test and will vary with local subsurface conditions.
Note : (Cracked Windshield & Missing Headlight)
Mounted on a 1992 Ford F-800 Truck - VIN: 1FDXK84A3NVA14295
Odometer Reads : 133,343 Miles
Note : If you are wanting to do direct rotary drilling with drill pipe
and roller cone bit or DTH hammer then you will need an add auxiliary
mud pump or auxiliary air compressor. If you do not have mud pump or
compressor then we do have some options in stock we can offer at
additional costs.
Ingersoll-Rand 400 CFM / 200 PSI air compressor, enclosed, trailer mounted.
Ingersoll-Rand 600 CFM / 125 PSI air compressor, enclosed, trailer mounted.
Ingersoll-Rand 750 CFM / 300 PSI Air Compressor mounted on 1996 Volvo truck
p/b Cat 3406E.
Sullair 900 CFM / 350 PSI air compressor, enclosed, skid mounted.
Gardner Denver FXFF 4 x 5 Duplex mud pump p/b CAT 3304, skid mounted.
Gardner Denver FXF 4 x 5 Duplex mud pump p/b Waukesha 4-cylinder diesel
engine, skid mounted.
Location : USA
| |
| |
|
|
|
Id: WR945
 Ingersoll-Rand T3W Drilling Rig - For Sale
Worldrigs ID: WR945
Description :
1990 Ingersoll-Rand T3W Drill Rig
Cummins 855 Diesel Deck Engine (200+ hours since rebuilt)
IR 825 cfm / 350 psi air compressor
(6) of 20ft x 4-1/2" drill pipe included
Myers water injection
Hammer lubricator
Hydraulic Leveling Jacks
Mounted on a Ford L9000 Truck
Cummins L10 Diesel Engine - rated 300 horsepower
Location : USA
| |
| |
|
Id: WR816
 1984 Built Ideco Rambler Workover Rig for sale
Worldrigs ID: WR816
1984 Ideco Rambler Rig, Model BIR-3185 Five Axle Carrier
Specifications
Single Drum H-35 Drawworks with 1” drill line
96’ x 215,000# Ideco Derrick with rods & tubing racking boards
Detroit Diesel Series 60, 475 HP engine
Traveling Block, Ideco DS110, slotted speed kit design, 2 sheaves, 110 ton
Foundation, iron stands on 3” x 12” timbers
Allison CLT5860 Transmission
Hydromatic Brake, 15” double rotor with water tank
Tong, Gill Model 500 with back up head
Blowout Preventer, Townsend Type 81, 7-1/16” x 5000 psi. double stack
Stripper Head, Hall style 1500 psi.
Tubing Slips, Guiberson 60 ton air operated
Rod Elevators, 5/8” to 1”
Tubing Elevators, 2-3/8” to 2-7/8” EUE
Wash Swivel, King 53GA
Hand Tools
| |
| |
|
Id: WR843
 Foremost CTR Single Coil Tubing Hybrid Drilling Rig for Sale
Worldrigs ID: WR843
Description :
Drawworks :
Foremost Hydraullic Drawworks, 95,000 LB Capacity, 400 ft
Drum Capacity
Drawworks Power : Detroit Series 60 Floor Engine
Hydraullic Power Unit :
W/(5) Main Hydraullic Pumps, Hydraullic Reservoir, Thermal
Exchanger, Plumbing, Filters
Mast :
Foremost 85 ft Mast, 140,000 LB Maximum Hook Load w/(4) Lines,
1" Drill Line, (2) 4 Stage Mast Raising Cylinders, Chains, Stand
Pipe, Hydraullic Piping, Utility Winch, Access Ladder, Lighting,
Fall Arrest
Substructure :
Foremost Trailer Mounted Raised Substructure; Sliding Trolley BOP
Handler w/(2) Hydraullic Cylinders, Manual Cellar Controls, Standpipe
Valve, Steam Manifold, Explosion Proof Lighting, Mounted on 2005
Peerless T/A 16 Wheel Trailer, Tires 11 R22.5, Steel Buds, Spring
Suspension, w/ Rear Outriggers, Front Levelling Jacks, Hydraullic &
Electrical Lines"
Rotary Table :
16" Rotary Table, w/1,600 LB Torque, 140,000 LB Maximum Load
Top Drive :
Fluid Design Solutions Model FDS240T 70 Ton Hydraullic Top Drive
w/ Integrated Swivel, Integral Travelling Block & Backup Leg
Injector :
Steward Stevenson Model M1100SK Injector, 110,00 LB
Lifting Capacity, 60,000 LB Snub Capacity
Hydraullic System & Components :
Raising Cylinders, Winches, BOP Handler, Doghouse Raising System,
Hoses, Filters,Valves
(1) Set Web Wilson Type AAX Manual 27/8"-95/8" Rotary Tongs
(1) Drill Pipe Elevator
Set Handling Tools :
Drill Pipe, Drill Collar Slips, Safety Clamp, Drill Pipe Elevators
Townsend Type 85 SPH Annular Preventer, 9"x 3,500 psi
(2) Townsend Model T88 Ram Preventer, 9"x 3,000 psi
Control Tech Working Spool, 9"x 3,000 psi, w/2" Outlets
Control Tech Crossover Spool, 7"x 3,000psi
Mud Pump :
Mastco Pump Shack, Model JBI JF800 Triplex Mud Pump, Detroit Series 60
14.7 Liter 700 Hp Diesel Engine, Tool Shop
Mud System :
358 BBL Mud Tank, (4) Compartments-17 BBL Trip Tank, 88 BBL Suction Tank,
125 BBL Settling Tank, 125 BBL Shaker Tank, Mix Pump,MixingGuns, Manifold
Swaco Mongoose - PT Elliptical - Motion Shale Shakers
(4) Mud Guns, (9) Flow Gates & Skimmers
Poorboy 28" In-Tank Degasser w/150 ft of 8" Vent Line
Chemical Mix Barrel w/5 Hp Electric Motor
(2) Mission Model 40202529 6x5x11 Pumps, w/ 50 Hp Electric Motor, 4" Manifold,
w/(7)4" Butterfly Valves, Hopper, Storage Compartment, Exhaust Fan, Mud Weight
Station, Pason Equipment
Drill Pipe :
(196)Joints 3 1/2" Range 3 Grade E Drill Pipe, w/ 3 1/2" IF Connections
(23) Joints 4" Range 3 Grade E Drill Pipe, w/ 3 1/2" IF Connections
(10) Joints 4 3/4" Drill Collars, w/ 3 1/2" IF Connections
(10) Joints 6 1/4" Drill Collars, w/4 1/2" XH Connections
(20) Joints 3 1/2" Hevi-Weight Drill Pipe, w/ 4 1/2" XH Connections
Combination Building :
12 ft x 54 ft Mounted on 4 Member Skid, Electrical Switchgear, Transformer,
Accumulator Plumbing, (15) Lockers, (2) Benchesw/ 9,000 Liter Fuel Tank,
(4) Product Tanks
Generator 1 :
Stamford Model 6063-MK35 350 KW Generator,w/ Detroit Series 60 475 Hp Diesel
Engine, w/ Electric Start, Lockout Box
Generator 2 :
Stamford Model IEC34-1 142 KW Generator,w/ Jhon Deere 190 Hp Diesel Engine,
w/ Electric Start, Lockout Box
MCC Panel, Transformer, Starters
Accumulator :
Control Tech Model Class 3 Accumulator, 80 Gallon Accumulator,5 Station Control,
3,000 psi w/ 178 Gallon Reservoir, PLC Remote, Cat Model Triplex Pump
Air Compressor :
National Compressed Air Model NCA-16-34GSD Air Compressor, w/ Sullair 2
Stage Air Compressor, 200 Hp Elecric Motor, 2005 Avis Welding & Fab 600
Instrumentation : psi Receiver,Selectronix Model ST-8 Instrumentaion
Diesel Day Tank, Liner Rack, Utility Bench, Tooling, Storage Cabinets
Explosion Proof Lighting
Weight Indicator, Rotary Torque Gauge, Pump Pressure Gauges, Tong Line
Gauges
Safety Equipment :
(3) Scott Air packs w/ (2) Spare Bottles, Fire Extinguishers, Welding Shields,
Safety Glasses, First Aid Kits, Stretcher, Eye Wash Stations,Safety Signs,
Lanyards
General Rig Tooling, Consumables, Rig Supplies, Spare Parts
Dog house :
9ft x 14ft, Drillers Control Console, Instrumentation, Storage Cabinets/Bench,
Stabbing Valve, Ruffneck Heater, A/C, Shelving
Tool House :
314 BBL Water Tank, Access Stairs, Safety Rails, Lubster, Cat Model 310 Triplex
Wash Pump, Utility Bench, Fastener Bins, Ruffneck Heater, Storage Compartments,
Tooling
Crew House 2005 Shelter Rig Managers Wellsite :
11.5ft x 45ft, Crew Washroom, Storage Area, Desk, Couches, Fridge, Stove,
Washer, Dryer, Washroom, Sleep Area Hydraulic Catwalk w/ Operator
Enclosure, Integral Hydraulic Power Unit, (4) Swing Out Arms, (4) Levelling
Jacks, Hydraulic Pump w/ 50 Hp Electric Motor, (3) Hydraulic Pipe Tubs
w/ Controls, Manifold
2048-F
Choke & kill Line Valves, 2"x 3,000 psi w/ Hi-kalibre HCR, Manual Gate Valves,
Check Valves
Choke Manifold, 3" Gut Line x 5,000psi,w/ (2)2" Wing Lines, (8)2" Gate Valves,
(2)3" Gate Valves, Cortec 2" Chokes x 5,000 psi
Flare Tank skid mtd w/7ft x 8ft x 7ft Tank, w/(2)2",(1)6" Knockouts, 3" Flare
Line, 6" Degasser Line, Safety Rails, Stairs
Boiler : 2005 Williams & Davis 777 Volcano 100 Hp Boiler
(4)2m x 5m Rig Mats
Location : USA
| |
| |
|
|
|
Id: WR738
 2000HP Electric SCR Rig for sale
Worldrigs ID: WR738
Rated Drilling Depth
23,500 ft, w/(5" D/P#19.5 Lb/ft)
Derrick
Type : Superior
Gross Capacity : 1,470,000 Lbs
Max. Hook Load : 1,100,000 Lbs
Height : 141 ft
Draw Works
Type : JC70D
Input Power : 2,000 HP
Max. Fast Line Pull : 100,000 Lbs
Drilling Line : 1 1/2" L.H. (12 Lines)
Rotary
Type : ZP-275
Max. Opening : 27 1/2"
Rotary Speed : 300 RPM
Height : 32 ft
Mud Pumps
No. : 2 EA
Type : F-1600
Input Power : 1,600 HP/EA
Max. Pressure : 5,000 Psi
TOP drive
Make/Type : Varco TDS-11S
Rated Load Capacity : 1,100,000 Lbs
Rotating Speed : 228 RPM
Power Supply
SCR System
- 4 EA CAT3512 Gensets (SCR)
- 2 EA Volvo TAD1631GE Generator (Main Camp)
- 1 Volvo TWD740GE Generator (Emergency)
- 1 EA Cat3406 Generator (Fly Camp)
Well Control Equipment
Diverter System:
- (21 1/4" x 2,000 Psi) Bag Type Preventer
- Drilling Spool
- 10” Vent Line w/ Hydraulic Ball Valve
BOP Stack:
- (13 5/8" x 5,000 Psi) Annular
- (13 5/8” x 10,000 Psi) Double Ram + Single Ram
Mud System
Total Mud Tanks Capacity : 2220 BBL
Shale Shaker Tank : 427 BBL
Suction & Slug Tank : 503 BBL
Mixing Tank : 377 BBL
Reserve Tanks (2) : 913 BBL
Trip Tank : 86 BBL
Slug Tank : 116 BBL
Water Tanks : 400 BBL
Camp
To accommodate 86 Persons
- 1 EA Kitchen
- 2 EA Mess Hall 1 EA Dry Food Storage
- 1 EA Cold Food Storage
- 1 EA Clinic
- 1 EA Recreation Room
- 2 EA AC Generators for Lighting
HSE
The Rig is fully equipped w/ fire fighting system
Diesel Motor Driven Fire Pump, Fire Blankets & Suits
| |
| |
|
Id: WR963
 Mobile B53 Diamond Core Drilling Rig - For Sale
Worldrigs ID: WR963 Description :
2000 Mobile B53 Diamond Core Drill Rig
300 ft of Drill Pipe (2-1/4" OD)
Detroit 353 Diesel Engine
Leveling Jacks
Mounted on a 1995 Ford F700 Truck 4x4
6L Gas Engine
91,014+ Miles
20ft L x 8ft W & 20,000 lbs weight
Location : USA
| |
| |
|
Id: WR632
 Trailer Mounted Rack & Pinion, Super Single Rig
Worldrigs ID: WR632
General Description
Estimated Drilling Depth : 10,000 ft
Estimated Rig Move Loads : 22
Estimated Camp Move Loads : 4
Rated HP : 850
Mast
Height : 80.00 ft
Static Hook Load Capacity: 300,000 lbs
Mast Racking Capacity : N/A
Substructure
Style : Parallelogram
Height : 14.00 ft
Clear Height : 11.00 ft
Casing Capacity : 300,000 lbs
Maximum Setback Load (lbs.) : 300,000
No Drawworks
Top Drive / Power Swivel
Make : Tesco
Model : 250 HMI 475
Capacity : 250 Ton
Torque - Continuous : 21,000 ft-lb @ 56 rpm
No Swivel
No Rotary Table
Power Generation
Engines : 2 ea. Detroit Diesel Series 6063HV35
Generators : 2 ea. Stamford Power System HCI534DIL
SCR / VFD / DC/DC : Rack & Pinion Rig
Enhancements
Forklift : Caterpillar 930H
Iron Roughneck : Canrig Drilling Technology TM80-110-12-X-WX/PCS
Power Slip Frame : TTS Sense 83415-04
Mud System
Mud Pumps : 2 ea Hong Hua HHF-1000
Power Rating : 1000 hp @ 140 spm
Reserve Mud Volume : 0 bbls
Pressure Rating : 5,000 psi
Active Mud Volume : 700 bbls
Shale Shakers : 2 ea. Derrick Corporation FLC 504
Desander : American Craftman 10" x 3 cones
Desilter : American Craftman 4" x 16 cones
Mud Cleaner : N/A
Centrifuge : N/A
Well Control
Double Ram : 11" 5,000 psi, Townsend, Type 82
Choke Manifold : Quality Valve & Machine Works Inc., 3 1/8" 5,000 psi
BOP Closing Unit : Burnsco, 6 Station 3,000 psi
| |
| |
|
|
|
Id: WR1085
 Ingersoll-Rand TH60 Drilling Rig - For Sale
Worldrigs ID: WR1085
Description :
1984 Ingersoll-Rand TH60 Drill Rig - S/N: 0797
LT - Long Tower with casing hammer
IR HR2 750 Cfm / 250 Psi Air Compressor
Cotta Box & Compressor Clutch Were Rebuilt in 2019
4-Hydraulic Leveling Jacks
26,500 Lbs of Pull Back
4-Cylinder Bean Water Injection Pump
Set Up For 4-1/2" O.D. x 20 ft Drill Rods
7-Rod Carousel and Rod Rack
14 of 4-1/2” X 20 ft, 1 of 4-1/2” X 15 ft & 1 of 4-1/2” X 3 ft
Homemade Casing Rod included
Hammer Oilier/Lubricator
612 Banger Casing Hammer Driver AX0785038H (we can remove it for sale)
Mounted On a GMC 9500 Heavy Duty Truck - VIN#: 1GDV9F4K2EV525092
Detroit 8V92 Diesel Engine
186,464 Miles On The Meter
Location : USA
| |
| |
|
Id: WR1010
 Driltech D40K Drilling Rig - For Sale
Worldrigs ID: WR1010
Description :
1993 Driltech D40K Drill Rig
Caterpillar 3408 diesel deck engine
Sullair 1000 cfm / 350 psi Air Compressor (valve issues)
50,000 lbs of pullback
Water Injection Pump 4 cylinder
Hammer Lubricator
1000 ft of 4-1/2" x 25 ft of used drill pipe included
8" hammer, petol wrench, control cover, & sling for rods included
Mounted on Mack Truck
Rated 300 HP with Jake Brakes
All new tires installed late 2023
Location : USA
| |
| |
|
Id: WR966
 Ingersoll-Rand TH60 Long Tower Drilling Rig - For Sale
Worldrigs ID: WR966
Description :
1985 Ingersoll-Rand TH60 Long Tower Drill Rig
Mounted on a 1985 GMC General Truck
Detroit 8V92T Diesel Engine - rated 475 HP (4000 Hours since Reman)
13 Speed Transmission (3600 Hours since new)
400 ft of Drill Pipe : 4-1⁄2" × 2-7/8" IF
Front Axle: 20,000# | Front Tires: Float 98%
Rear Axles: 46,000 # | Rear Tires: 95%
Carousel : 7 Rod
Rod Box: 13 Rods
Air Compressor: Ingersoll-Rand 750 cfm / 250 psi (Rebuilt - 3500 Hours since)
Cooler: 2750 Hours since new
Cotta Box: Rebuilt - 600 Hours ago
Slide Box: Rebuilt - 250 Hours ago
Main Pump: Rebuilt - 2000 Hours ago
Sundstrand Rotation: Rebuilt - 2500 Hours ago
Rotary Head Motors - 500 Hours ago
Water Injection Pump: Cat 1010
King Swivel: K-15- 250 Hours
Oiler for hammer
Additional Mud Piping
No Mud Pump Onboard
Location : USA
| |
| |
|
|
|
Id: WR951
 Ingersoll-Rand TH60 Drilling Rig - For Sale
Worldrigs ID: WR951
Description :
1987 Ingersoll-Rand TH60 Drill Rig
Mounted on a GMC General Truck
Detroit 8V92 Silver Series Diesel Engine - rated 475 HP
Note: 3000 hours since rebuild with list below
8100 original frame hours
45,000 miles on chassis
13 speed road ranger transmission
IR 825 cfm / 350 psi air compressor
28,000 pull back
18k main winch
Auxiliary sand line winch
Hammer oiler
Single rod loader-murphys plug
Machine recently outfitted with swinging- telescoping jib crane
with helper side controls
Rebuilt hydraulic jacks
Rebuilt main feed cylinder
Rebuilt fan motor
Rebuilt water injection pump
Rebuilt and reinforced rod box
Rebuilt retract cylinder
Newer air controls at drillers panel
All newer wheels and tires steering and traction-no recaps
All newer brakes all the way around
Newly built underbody heavy duty steel tool box for table
bushings-drill bits-wrenches etc.
Dual 120 gallon aluminum fuel tanks
Newer batteries
Miller 225 welder mounted on deck with leads ran to back very low hours on welder
Racks for water hoses
Per Driller : Machine is drilling daily
Stored inside always unless on a job for past 20 years
Comes with standard table bushings and wrenches
Murphys lifting plug
400 ft 4 1/2" drill rod
Carousel holds 140 ft remainder in rod box
Undercarriage and frame in excellent condition with no rust-rot
Interior of cab is very nice, all working lights and gauges vacuumed and
cleaned weekly
Location : USA
| |
| |
|
Id: WR1031
 Pump Hoist Rig - For Sale
Worldrigs ID: WR1031
Description :
Pump Hoist Rig
Mounted on a 1990 Ford F350 XLT 4X4 Truck
VIN: 2FDKF38G5LCA77708
Ford 460 7.5 Liter Gas Engine
94,921 Miles on Odometer
GVWR range 10,001 to 19,500 lbs.
4 Outrigger Style Leveling Jacks
(Rotating Style Extenable Hoist)
Sand Line
Toolboxes
Bailor and Misc. Tooling Included
Body & Deck Has Some Rust
Location : USA
| |
| |
|
Id: WR468
 ZJ-40 Drilling Rig for sale
Worldrigs ID: WR468 Derrick
JJ22538 mast with guylines, hydraulic raising and telescoping, max. capacity 2250kN, windproof capacity with full setback, without hook load 110km/h, mast height 38m
14 X 8E Carrier Vehicle,drive type 14X8, max. speed(limited) 45km/h, climbing gradient 26%, min. Ground clearance 311mm, steering radius 19,5m
Hydraulic cathead cylinder
Hidraulic outrigger
Mast Raising and telescoping cylinders
Drill pipe Set Back Area (Racking platform capacity: 10 setbacks 7”DC, 4000m 4 ½”DP or 3200m 5” DP
Drillfloor in derrick area 7,4m X 7,4m
Monkey Board
Derrick lighting system
Hydraulic cathead cylinder
Stairways to rigfloor
Hand railings
Substructure
Substructure model ZZT 225D, max. load 2250kN, working height 6m, structure Parallelogram, working space below rotary beam 4,9m
Catwalk
Pipe Racks
Crown block model TC225, max. load 2250kN
Hook Block model YG225, max. load 2250kN
Swivel SL 225, working load 0f main bearing 1500KN(100r/min), max. work pressure 35MPa
Main oil pump, discharge capacity 208L/min, system pressure 21MPa/14MPa
TQ340-35 Casing Power Tong , Capacity 4 ½” – 13 3/8”
ZQ203-100 Drill Pipe Power Tong, 3 ½” – 5”
YZB-120 Hydraulic Power Station, Rated working pressure 16MPa
Pneumatic system, rated pressure 0,85MPa
Standpipe Manifold
Mud Valve Z23Y-35, 100mm - 5000psi
Standpipe 4 ½”
Rotary jumper hose (bottom standpipe)
Rotary Hose
Upper Kelly Valve
Kelly 5 1/4" Hexagonal
Kelly drive bushing - 5 1/4"
Lower Kelly Valve
Transmission box model Allison S6610HR, max. net input power 850HP, max. input rotary speed 2500r/min, max. net input torque 3118N.m
Compounding box model BJX260B, max. input rotary speed 2500r/min, max. output torque 26000N.m
Drawworks model JC28/11D, Main drum fast line pull 280KN
CAT C18 Diesel Engine, Power 630HP/2100r/min
Auxiliary Brake model WCB236, brake power 970HP, brake torque 66611Nm, circulating water pressure 40 psi
Drill Line – 1 1/4" diameter
Drill Line Spool
Drillers Console
Rotary Table - 27 1/2", model ZP275, max. Rotary speed 250rpm, max. Net load 4500KN, max. Torque 27kN.m
Rotary drive box, model ZX140B, max input rotary speed 2100r/min, max. input torque 14000N.m, Clutch model Axial thrust disk ATD318H
Masterbushing
Hydraulic winch model YJ3C, max. hoisting capacity 30KN
Hydraulic winch model YJ5B, max. hoisting capacity 50KN
BOP Control
B.O.P. Closing Unit
Remote Control Panel
13 5/8" 5000 PSI Annular BOP
B.O.P. 13 5/8", double studded complete with 2" side outlets (double ram - blind/pipe rams)
associated spools and DSA for BOP and Wellhead connections
Mud-Gas Separator
Choke Manifold 5000psi
BOP control hoses
Mud Treatment Package
ZG-58,4 Sand Control Tank (Shaker tank) with staircase
Shale Shaker Model QZS 703 El. motor 1.72KW 1400RPM x 2
Vacuum Degasser Model ZCQ 300, El. motor 3KW 1470 r/min, El. motor 4KW 1435 r/min
FG-49,4 Cycle Tank
Model 200SB 240-40 Sentrifugal Sand Pump, Rate 240m3/h, Inlet Diameter-200mm, Outlet Diameter-150mm, El. motor 55KW, 1480 r/min (For solids control system)
Desander Model LCS 250 x 2 with shale shaker, vibration el. motor 0.8KW 1410 r/min
Desilter Model CNQ 100 x 10, with shale shaker, vibration el. motor 0.75KW 1400 r/min
Centrifuge Model LW 450x842-N, El. motor 5.5KW 1440 r/min, El. motor 22KW 1470 r/min
FG-54,6 Cycle Tank (suction tank) with staircase
Agitator Model WNJ 11, El. motor 11KW 1460 r/min
Model 200SB 240-40 Sentrifugal Sand Pump, Rate 240m3/h, Inlet Diameter-200mm, Outlet Diameter-150mm, El. motor 55KW, 1480 r/min (For mud hoppers)
Mud Hopper
Mudgun
Water tank - 500bbl Capacity, with water pump
Mud Pumps
Mud Pump F-1000, triplex, rated stroke length 10”, Maximum WP 5000 psi
Suction manifold – 12”
Charging pump, centrifugal, model SB200x150-310, lift 25m, flow 180m3/h, el. Motor 37KW, 1490r/min
Pump engine, model G12V190PZL-3
Generator Package
MSS System, model WB ZJ40-3
Power supply system FKS-V400
Diesel-Generator Set, model FKS-V400, Diesel engine TAD 1345GE, power 400KW, 400V, 1500rpm, 50Hz
Air supply system
Electric Control Panel
SULLAIR 3000 Compressors, max. W.P 210psi, max. temp. 2350F with JYL 50F Refrigerated Compressed Air Dryers
Air Receiver 3m3
FUEL SYSTEM
Fuel Supply System
Fuel Tank – 50 m3 with fuel pump
Rigsite Accommodation
Container 20ft – Rig manager
5 Man bunkhouse units - container type caravan.
2 Man bunkhouse units – container type caravan with communal shower and toilet facilities.
8 man bunkhouse units – container type caravan with communal shower and toilet facilities.
Container 20ft for kitchen personal.
Container 20ft for Doctor.
Kitchen Galley -fully equipped kitchen and communal eating facilities
Storage container 20ft
Container mud lab.
| |
| |
|
|
|
Id: WR946
 Ingersoll-Rand T3W Drilling Rig - For Sale
Worldrigs ID: WR946
Description :
1992 Ingersoll-Rand T3W Drill Rig
Cummins 855 Diesel Deck Engine
IR 825cfm/350psi Air Compressor
Myers Water Injection Pump
Hammer Lubricator
Modine Compressor
Hydraulic Cooler
No Drill Pipe & Setup for 4-1/2"
Hydraulic Leveling Jacks
Mounted on a Ford L8000 Truck
Brazilian Ford Engine
Location : USA
| |
| |
|
Id: WR625
 850HP Trailer Mounted Rack & Pinion Rig for sale
Worldrigs ID: WR625 General Description
Estimated Drilling Depth : 10,000 ft
Estimated Rig Move Loads : 22
Estimated Camp Move Loads : 4
Rated HP : 850
Mast
Height : 80.00 ft
Static Hook Load Capacity: 300,000 lbs
Mast Racking Capacity : N/A
Substructure
Style : Parallelogram
Height : 14.00 ft
Clear Height : 11.00 ft
Casing Capacity : 300,000 lbs
Maximum Setback Load (lbs.) : 300,000
No Drawworks
Top Drive / Power Swivel
Make : Tesco
Model : 250 HMI 475
Capacity : 250 Ton
Torque - Continuous : 21,000 ft-lb @ 56 rpm
No Swivel
Rotary Table
Power Generation
Engines : 1 ea. Detroit Diesel Series 6063HV35
Generators : 2 ea. Stamford Power System HCI534DIL
SCR / VFD / DC/DC : Rack & Pinion Rig
Enhancements
Forklift : Caterpillar 930H
Iron Roughneck : Canrig Drilling Technology TM80-110-12-X-WX/PCS
Power Slip Frame : TTS Sense 83415-04
Mud System
Mud Pumps : 2 ea Hong Hua HHF-1000
Power Rating : 1000 hp @ 140 spm
Reserve Mud Volume : 0 bbls
Pressure Rating : 5,000 psi
Active Mud Volume : 700 bbls
Shale Shakers : 2 ea. Derrick Corporation FLC 504
Desander : N/A
Desilter : N/A
Mud Cleaner : N/A
Centrifuge : N/A
Well Control
Annular : 11" 5,000 psi, Townsend, Type 90
Double Ram :
11" 5,000 psi, Jiangsu, 2FZ28-35
11" 5,000 psi, Townsend, Type 82
Choke Manifold : Quality Valve and Machine Works Inc, 3 1/8" 5,000 psi
BOP Closing Unit : Burnsco, 6 Station 3,000 psi
| |
| |
|
Id: WR983
 Drilling Rig for Sale-1.webp) Atlas Copco T4BH (Blast Hole) Drilling Rig - For Sale
Worldrigs ID: WR983
Description :
2005 Atlas Copco T4BH (Blast Hole) Drill Rig - S/N: 8401
37,500 Lbs of Pullback
Note: Can be converted to T4W at an extra cost with 50k or 70k pullback options
IR HR2.5 1070 cfm / 350 psi Air Compressor
Cummins ISX15 Diesel Deck Engine
5-Rod Carousel to handle 5” x 25ft Drill Pipe (5 included)
Hammer Lubricator
2 Motor Spur Gear Head with Floating Sub
Hydraulic Leveling Jacks
Mounted on a CCC (Crane Carrier Company) Truck
CAT Diesel Engine
Rear Driller Cab
Location : USA
| |
| |
|
|
|
Id: WR944
 Generic Hydraulic Crawler Drill Rig and Air Compressor - For Sale
Worldrigs ID: WR944 Description :
Hydraulic Crawler Drill Rig and Air Compressor
KW180 Hydraulic Crawler Mounted Drill Rig
168 Hours
Max Pull 12t / Max Push 4.5t
Top Drive with 2-3/8" Reg Box Connection
Has a 10ft Foot Stroke
2020 Kaishan KSZJ 18/17 Air Compressor
Yuchai (Cummins) Diesel Powered
Dual Screw Air End
168 Hours
635 CFM @ 250 PSI
180m 3" Drill Rods in 10ft Lengths, 2 3/8" Reg Connections
1x New 7" Step Bit
1x New 4" Step Bit
Location : Canada
| |
| |
|
Id: WR818
 National Oilwell Model 5C Five Axle K100C Carrier Workover Rig - For Sale
Worldrigs ID: WR818
Description :
Single Drum D500 Drawworks with 1” drill line
104ft x 250,000# National Derrick with rods & tubing racking boards
Detroit Diesel Series 60, 500 HP engine
Allison S5610H Transmission with drop box
Traveling Block, Ideco DS110, slotted speed kit design, 2 sheaves, 110 ton
Foundation, steel scissor beam on 3” x 12” timbers
Disc Assist Brake, model 54, 48” mounted at the drum
Tong, Gill Model 500 with back up head
Blowout Preventer, Townsend Type 81, 7-1/16” x 5000 psi. double stack
Stripper Head, Hall style 1500 psi.
Tubing Slips, Guiberson 60 ton, air operated
Rod Elevators, 5/8” to 1”
Tubing Elevators, 2-3/8” to 2-7/8” EUE
Wash Swivel, King 53GA
Hand tools
Location : USA
| |
| |
|
Id: WR1078
 Atlas Copco T4W Drilling Rig - For Sale
Worldrigs ID: WR1078 Description :
2007 Atlas Copco T4W Drill Rig
Air-Conditioned Cab
IR HR2.5 1070 CFM x 350 PSI Air Compressor
Cummins ISX15 Diesel Deck Engine
50,000 Pull Back
18 GPM Bean Water Injection Pump
7 Gallon DHD Oiler
CAT C13 (rated 410 HP) Diesel Engine
Jake Brake and 8LL
Full Locking Rears
Worm Gear Rotary Head with Floating Spindle
Main 7 Rod Carousel and Special 8 Rod Carousel on side of the mast
(400ft on the drill with a Starter Rod)
Swingout 20" Table
All Aluminum Wheels, Fenders and Tool Boxes
New Paint
1000ft of 4 ½ x 25ft T4 Drill Rod
Like New (500ft Steel / 500ft Aluminum)
All Engines are Pre-Emissions
Miles- 12,907
Hours- 3,300
Note: Currently in use every day
Location : USA
| |
| |
|
|
|
Id: WR1007
 Sandvik T1000 BH Drilling Rig - For Sale
Worldrigs ID: WR1007
Description :
2006 Sandvik / Driltech T1000 Drill Rig - S/N: 732989
BH (Blasthole drilling)
CAT C15 Diesel Deck Engine - (3300 hours since rebuilt)
Sullair 1000 cfm / 350 psi Air Compresser - (5,000 hours since rebuilt)
Carousel (handles 4-1/2" drill pipe)
2 Piston Water injection pump
1 Rod Winch
Hammer Oilier
Hydraulic Leveling Jacks
Mounted on a Sterling Truck
Mercedes Benz Diesel Engine
8LL Transmission
Paint Job in 2016
Very Good Tires
37ft L x 8ft 6" W x 13ft 2" H & estimated 54,000 LBS weight
Location : USA
| |
| |
|
Id: WR938
 Generic MC 900 P Drilling Rig - For Sale
Worldrigs ID: WR938
Description :
1 - Comacchio MC 900 P DD Drill Rig
1 - Comacchio MC 900 P RC Drill Rig
Deutz BF 4M 1013 FC 112 KW/152 HP Diesel Engine
13 Ft Feed Stroke
Rotary Head
Double Head
Winch - 4,966 Lb
Foam Pump
Triplex Pump
D.T.H Lubricator
Location : Africa
| |
| |
|
Id: WR991
 Schramm T64HB Drilling Rig - For Sale
Worldrigs ID: WR991
Description :
Schramm T64HB Drill Rig
GHH 750 cfm / 300 psi Air Compressor (recently overhauled)
Detroit 8V92 Diesel Deck Engine
Mounted on a Ford Truck
Diesel Engine
Notes : Top head is good hydraulic motors overhauled in 2022
Overall fair working condition
Location : USA
| |
| |
|
|
|
Id: WR917
 Chicago Pneumatic T650 WS Drilling Rig - For Sale
Worldrigs ID: WR917
Description :
1979 Chicago Pneumatic T650WS Drill Rig
GHH 825 cfm / 300 psi Air Compressor
Caterpillar 3406B Diesel Deck Engine
6-Rod Carousel
Set Up for 4-1/2" x 20 ft Drill Pipe
Rod Rack
Hydraulic Leveling Jacks
12,000 lbs Sandline
Hammer Lubricator
Mounted on a Ford 8000 Truck - VIN #U80QVEC65I9
Caterpillar 3208 Diesel Engine
73,246 Miles Showing on Odometer
Location : USA
| |
| |
|
Id: WR913
 Schramm T660 Drilling Rig - 1986 Built - For Sale
Worldrigs ID: WR913
Description :
1986 Schramm T660 Drill Rig - S/N: T660-1766 & B/M #B104-0044
Detroit 8V92 Diesel Deck Engine
GHH 850 cfm / 350 psi Air Compressor - S/N: 861224/84984
3-Cylinder CAT Water Injection Pump
4-Rod Lazy Susan & 8-Rod Carousel (Set Up for 4-1/2" OD x 20ft Drill Pipe)
(3) Hydraulic Leveling Jacks
Mounted on a 1986 GMC Brigadier Truck
VIN#: 1GDT8C4Y8GV539207
GVW 53,320 LBS. Front 15,320 LBS. & Rear 38,000 LBS
Location : USA
| |
| |
|
Id: WR925
 Gus Pech KH-48 Super George Drilling Rig - For Sale
Worldrigs ID: WR925
Description :
1993 Gus Pech KH-48 Super George Drill Rig
Mountaed on a 1993 Mack RB688S
Tandem Axel
Mack Diesel Engine
Camel Back Suspension
Double Pump Unit
4-Point Stabilizers
Day Cab
Maxitorque 13 Speed Transmission
Drill Bucket
Tilt Mast
Average Tires
Location : USA
| |
| |
|
|
|
Id: 9000-455
 NOV Rapid Drilling Rig for Sale
Worldrigs ID: WR702 Description :
Substructure :
NOV - Slingshot type (2 piece)
Clearance : 20ft with 18ft of clearance
Capacity : 500,000# loading
Six well skidding system
Mast :
NOV - Telescoping
Height: 80ft
Capacity : 500,000#
Winch & Gin Pole : 5,000#
Drawworks :
NOV - SSGD 250 (disc brakes)
Rating : 1500- hp
Capacity : 500,000# on eight 1¼” lines.
Motor : Baylor AC
Top Drive :
NOV - TDS 10R
Rating : 250 ton
Torque Capacity :
36,500 ft/lbs intermitting
20,000 ft/lbs @ 98 rpm continuous
9730 ft/lbs @ 182 rpm continuous
Drillers Cabin :
NOV - Purged
Amphion Controls
Pipe Handling :
Iron Roughneck - NOV ST - 80R
Range : 4¼” to 8½”
Torque Capacity :
60,000 ft/lbs make up
80,000 ft/lbs brake out
BX - 450 Elevators (250 ton)
Range : 2 7/8”,5”,7”,95/8” & 13 3/8”.
PS - 21 Slips (250 ton)
Range : 2 7/8”, 5”, 7”, 9 5/8” & 13 3/8”.
Erector arm, pipe funnel and pipe rack wings.
Mud System :
Mud Pumps - 2 NOV F-1600
Rated : 1,600 hp.
Pressure :
5,000 psi
Relief Valves :
3” OTECO
Screens :
Discharge manifold & Suction skid
Stand Pipe :
5”, 1002
Mud Pits (covered)
Capacity : 625 bbls
Mixing System & skid
Shale Shakers : 2 Derrick
Trip tank : Two 25 bbl tanks & pumps
Rolling Flow Line System (15ft spacing)
BOP Equipment :
11” X 5m Shaffer Annular (flanged)
11” X 5m Shaffer Double Ram (studded)
11” X 5m Mud Cross (flanged with 3 1/8” outlets)
Re-certified by OEM
Choke Line :
3 1/8” X 5m HCR Valve
3 1/8” 5M Manual valve (replace)
3 1/8 Coflex hose :
Three - 15ft - 3 1/8” flanged choke lines
10ft - 3 1/8” flanged choke line
Four - 3 1/8” studded Tees with one filled blind flange
Kill Line 2” Coflex hose
Two : 3 1/8” X 5m manual valves (replace)
Check Valve :
NOV Hydraulic Handling System
3 1/8” X 5m Choke Manifold (hydraulic & manual chokes)
Gas Buster
Flare Stack & line
Power :
Two 3512C Caterpillar Engines
Rated : 1476 hp @ 1200 rpm
Two Baylor Generators
Rated : 1750 kVa, 600 volts / 60 HZ
NOV VFD & MCC
Bi-fuel System
Drill Pipe :
370 jts - 5” 19.5 #/ft., NC 50
Grade :
S-135
Range : III (40ft)
Inspected by Drilco
Critical Capital Spares :
F-1600 Mud Pump
Baylor 1750 kVa Generator (for repair)
Winch – 5,000#
Hydraulic Cylinders :
Substructure Raising (repairing NOV)
Derrick Raising (repairing NOV)
Derrick Scoping (repairing NOV)
BX 450 Elevators
PS 21 Slips
Skid System Description :
Applied Machinery Corporation custom built skidding system.
Capable of 75ft skidding.
Key description:
Rig Skid System :
12” Elevated Skid
Draworks Skid Section
Starter Skid Section (ODS/DS X 43ft)
Standard Skid Section (ODS/DS X 15ft)
Log of Pins, Spreaders, and Claws
AMC Hydraulic Drill Line Spooler
Festoon Track
Hydraulics :
2 Hydraulic Cylinders
10” Bore X 25” Stroke
3,000 psi Working Pressure
Associated Hoses and Fittings
Festoon :
8ft X 35ft X 12” Master Skid
Capable of supporting a 75ft Skid
4” Integrated Track and Roller for Festoon and Grasshopper
Shaker and Flowline Header :
10” “Mona-Flow” line with fittings and jets
Rolling capability to support skids
Trip Tank and mud bucket hoses
Rig Load List
|
Single Well Pad
|
Loads
|
3 Well Pad
|
|
Shaker Pit
|
1
|
Shaker Pit
|
|
Suction Pit
|
2
|
Suction Pit
|
|
Trip tank & Choke Manifold
|
3
|
Trip tank & Choke Manifold
|
|
F- 1600 Mud Pump
|
4
|
F- 1600 Mud Pump
|
|
F- 1600 Mud Pump
|
5
|
F- 1600 Mud Pump
|
|
Utility Skid
|
6
|
Utility Skid
|
|
3512 Caterpillar Gen Set
|
7
|
3512 Caterpillar Gen Set
|
|
3512 Caterpillar Gen Set
|
8
|
3512 Caterpillar Gen Set
|
|
Air Compressor Skid
|
9
|
Air Compressor Skid
|
|
VFD
|
10
|
VFD
|
|
Festoon & Grasshopper
|
11
|
Festoon & Grasshopper
|
|
Fuel Tank
|
12
|
Fuel Tank
|
|
Rig Water Tank
|
13
|
Rig Water Tank
|
|
Drawworks / Koomey
|
14
|
Drawworks / Koomey
|
|
Substructure
|
15
|
Substructure
|
|
HPU Skid & Grasshopper
|
16
|
HPU Skid & Grasshopper
|
|
Drillers Substructure
|
17
|
Drillers Substructure
|
|
Drillers Cabin
|
18
|
Drillers Cabin
|
|
Drill Line Spool
|
19
|
Drill Line Spool
|
|
2 Pipe Wings
|
20
|
2 Pipe Wings
|
|
2- Pipe Wings &Arm
|
21
|
2- Pipe Wings &Arm
|
|
Flow line, Pipe Handler, CoFlex
|
22
|
Flow line, Pipe Handler, CoFlex
|
|
Flare Box & Line
|
23
|
Flare Box & Line
|
|
2 sets Pipe Racks
|
24
|
2 sets Pipe Racks
|
|
2 X Hose Baskets
|
25
|
2 X Hose Baskets
|
|
Drill Pipe: 5" , 19.5 #/ft
|
26
|
Drill Pipe: 5" , 19.5 #/ft.
|
|
Drill Pipe: 5" , 19.5 #/ft
|
27
|
Drill Pipe: 5" , 19.5 #/ft.
|
|
Drill Pipe: 5" , 19.5 #/ft
|
28
|
Drill Pipe: 5" , 19.5 #/ft.
|
|
Pipe Bunks X 4
|
29
|
Pipe Bunks X 4
|
|
Tool / Nipple House
|
30
|
Tool / Nipple House
|
|
Hydraulic Shop
|
31
|
Hydraulic Shop
|
|
Parts House
|
32
|
Parts House
|
|
BOP in Cradle
|
33
|
BOP in Cradle
|
|
Stairs & Porches
|
34
|
Stairs & Porchesin Cradle
|
|
Mats X 5
|
39
|
Mats X 5
|
|
|
44
|
Flow Line X 2
|
|
|
48
|
Skid System X 4
|
| |
| |
|
Id: WR825
 Ideco Backin Rambler Workover Rig for Sale
Worldrigs ID: WR825
Description :
Single Drum H-35 Drawworks with 1” drill line
96ft x 212,000# Ideco Derrick with rods & tubing racking boards
Detroit Diesel Series 60, 450HP engine
Allison CLT5860 Transmission
Traveling Block, Ideco DS110, slotted speed kit design, 2 sheaves, 110 ton
Foundation, iron stands on 3” x 12” timbers
Hydromatic Brake, 15” double rotor with water tank
Tong, Gill Model 500 with back up head
Blowout Preventer, Townsend Type 81, 7-1/16”x 3000 psi. double stack
Stripper Head, Hall style 1500 psi.
Tubing Slips, Guiberson 60 ton, air operated
Rod Elevators, 5/8” to 1”
Tubing Elevators, 2-3/8” to 2-7/8” EUE
Wash Swivel, King 53GA
Hand Tools
Location : USA
| |
| |
|
Id: WR997
 Speedstar 1500 Drilling Rig - For Sale
Worldrigs ID: WR997
Description :
1976 Speedstar 1500 Drill Rig
with 22 Draw works
Combo Air/Mud
Top Head Drive Drilling Rig
Mounted on a 1976 Ford 9000 (5 Ton) Truck - (Serial # U91VVC16817)
Cummins Diesel Engine & 5" X 6°
Gardner Denver Mud Pump
500 CFM X 250# Air Compressor Truck Mounted - (J. L. Beeman)
With the following Auxiliary Equipment:
100 Ft. 3-1/2" Air Drill Collars -- (Rex McFadden Ltd./Atlas machine)
Shop Made Subs & Collars - (Owens Machine)
10 Stabilizer - (Rex McFadden/ Atlas Machine)
900 FL 3" (Range 1) Air Drill Pipe - (J. L. Beeman)
5-1/2" Rock Hound Air Hammer with High Pressure &
Low Pressure Piston/ 6-1/2" Bit - (Rock Hound)
Lil Darlin Blow Out Preventer - (Mauldin Sales)
Single Axle Shop Made 10° Trailer with Dog House
with Junk Basket - (Mauldin Sales)
Single Axle Shop Made 12° Trailer Mud House - (Mauldin Sales)
1965 Model Shop Made 3 X 7,000# Axles X 20ft Drill Pipe
Trailer VIN # TRI48964 - (Sojourher Drilling)
Location : USA
| |
| |
|
|
|
Id: 9000-383
 MAC 400 - Mechanical Drilling Rig 450 hp for Sale
Worldrigs ID: WR18 Description
Drawworks :
Mac 400 with hydromatic (water) brake, catheads, powered by a Caterpillar 3408 rated
at 450 HP with air clutch and torque converter
Mast :
P-J Services, 98’ free standing derrick, 280,000#, angle iron steel beams, scopes
with king pin and two axle dolly. Racking capacity of 8500’ of 4 ½” drill pipe
Substructure :
One piece, I beam box type. 8’H x 15’W x 34’L with 4’ fold down wings, enclosed parts house
and large volume tank with Quincy 350 air compressor driven by electric motor in substructure.
Rotary Table :
Brewster 17 ½”, rotary bushing-square, 4 ½” square Kelly
Block/Hook :
Three sheaves (6 lines) grooved for 1 1/8” line
Swivel :
TSM 150 ton with new wash pipe and packing
Generator :
125 KW powered by Detroit 6-71 in steel house with all switchgear and transformer.
Steel house includes parts cabinets, work area, and storage
Mud Pump :
Gardner Denver FXN 7 ½” x 14’ duplex powered by a Cat 3408 (450 HP) with air clutch
Mud System :
Single cone desander, Mission Magnum mud mixing pump, mud stirring guns
(rig uses earthen pits)
BOP :
Regan 10” annular (new annular rubber)
Top Dog House :
Scopes down into 400 barrel water tank, heater lockers, knowledge box
Drill String :
200 joints 4 ½” x-hole, 16.60 ppf drill pipe, yellow band, 12 assorted subs,
lower Kelly valve, inside BOP
Ancillary Equipment :
Kelly hose (new), vibrator hoses (3), 2500’ of 1 1/8” drill line (new), mouse hole, mouse
hole driller, weight indicator, tong torque gage, bear automatic driller, one pen drill recorder,
Sure Shot deviation instrument, mud gages, (3) sets pipe racks, Type C rotary tongs, rig lights
(derrick, sub, mud pump, gen house), drill collar slips, (2) sets drill pipe slips, Quincy 325
air compressor with electric motor, slick line wire line unit mounted on single axle trailer.
| |
| |
|
Id: WR821
 Precision 750 HP SCR Rig for sale
Worldrigs ID: WR821
General Description
Make : Precision
Year Built/Rebuilt : 1990
Estimated Drilling Depth : 10,000 ft
Estimated Rig Move Loads : 28
Estimated Camp Move Loads : 15
Rated HP : 750
Mast
Height : 85.00 ft
Static Hook Load Capacity : 280,000lbs
Mast Racking Capacity : N/A
Substructure
Style : Box Type
Height : 14.00 ft
Clear Height : 12.5 ft
Casing Capacity : 280,000lbs
Maximum Setback Load : N/A
Drawworks
Make : Draco
Model : Supreme 700E
Power Rating : 700 hp
Input Power : 1 ea GE 752 5GE 752 AR2A
Brake Type : Band W/ Aux Brake Wichita 7-326-300-102-0001
Drilling Line Size : 1 1/4”
Top Drive / Power Swivel
Make : Canrig
Model : 6027E
Capacity : 275 Ton
Torque – Continuous : Max RPM 24,500 ft-lb @ 130 RPM
Swivel
None
Rotary Table
None
Power Generation
Engines : 3 ea Caterpillar D-398
Generators : 3 ea ABB 718
SCR / VFD / DC/DC : SCR Rig
Mud System
Mud Pumps : 2 ea Cont Emsco F-1000
Power Rating : 1000 hp @ 140 rpm
Pressure Rating : 5,000 psi
Active Mud Volume : 792 bbls
Reserve Mud Volume : 415 bbls
Shale Shakers : 3 ea Derrick FLC 514
Mud Cleaner : N/A
Desander : Derrick 9” x 3 Cones
Desilter : Derrick 3” 20 Cones
Centrifuge : N/A
Well Control
Annular : 13 5/8” 5,000 psi Yancheng Shen
Double Ram Preventer : 13 5/8” 5000 psi Shaffer. SL
Choke Manifold : Jiangsu 3 18” 5000 psi
BOP Closing Unit : Wagner 5 station 3,000 psi
Enhancements
Forklift : Caterpillar 930
Iron Roughneck : Forum Tech 80
Pipe Arm : Failing/Sierra PB-FS7500Spec 12
| |
| |
|
Id: WR365
_result.webp "D40S Water Well and Geothermal Hydraulic Drilling Rig for Sale") D40S Water Well and Geothermal Hydraulic Drilling Rig for Sale
Worldrigs ID: WR365 Specifications
Pull up : 88῾302 lb
Pull down : 44῾150 lb
Stroke : 28 ¼’
Drilling torque : 20῾650 ft-lb 0÷180 rpm
Coring torque : 3῾320 ft-lb @ max 800 rpm
Speed up/down : 2,3 ft/s
Service jib crane : 22῾075 lb
Mud pump : 7 1/2” X 7” duplex double acting
Centrifugal pump : 792 gal 42÷72 psi
Foam pump : 60 GPM 1210 psi
Double vice : 20 ½”
Make up and break out :59῾000 ft-lb
Stroke : 27 ½”
Diesel engine : 440 kW @ 1800 rpm
Drill pipe feeder : 3 ½”÷8”
Drilling : Direct circulation - coring
Dimensions : 8,20’x 42,65’x 13,94’ (h)
Weight : 101῾412 lb
Description
D40 Hydraulic Driling Rig
Truck mounted on Astra 8 x 4
Pull up 40 metric tons
- Truck Astra HD8 Model 84.44 (heavy duty) 8x4, Euro 5
- Mast Lattice Type for D.P. and D.C. 6mt long
Maximum static hook load : 40 metric ton (44 short ton)
Maximum pull down : 20 metric ton (22 short ton)
Top drive stroke : 8,6 m.
- Slant device that permit to drill from 0-45 degree with Hydraulic Stops 5 degree by 5
degree
- Automatic drill pipe and drill collar handling system Suitable to catch drill pipes and drill
collars diameters 2 â…œ” -8” with control valve for force regulation.
- Semi automatic Pipe Rack
- Pull up and down system composed by hydraulic block distributor with valves,
hydraulically controlled to action the main cylinder.
- Hydraulic power Tong
at double body, suitable to screw and unscrew DP, DC and CSG.suitable to catch D.P.
from 2 â…œ” to CSG max 20”, full opening passage 20.1/2”.( 520 mm).
Maximum make : up 6200 kgm
Maximum brake : out 8000 kgm
- Top drive
Standard Drilling
• Maximum torque 2.800 daNm at 50 RPM (20.282 ft/lb)
• Maximum torque 778 daNm at 180 RPM (5.633 ft/lb)
• RPM from 0 to 180
Coring Drilling
• Maximum torque 448 daNm at 362 RPM (3239 ft/lb)
• Maximum torque 202 daNm at 800 RPM (1460 ft/lb)
• RPM from 0 to 800
• Stroke 8,6 m ( 52,5 ft)
• Pull up 40 metric tons ( 44 short ton )
• Pull down 20 metric tons ( 22 short ton )
• Maximum speed up 1 m/sec
• Maximum speed down 1 m/sec
- Service jib crane
With telescopic arm extension minimum 1.5 mt
Maximum load capacity 10 tons
Running speed up and down 0,5 m/s
Rope ø 13 mm
- Crown block :
Complete of 2 sheaves for wire rope ø 13 mm mounted on bearings
- Travelling block :
For 10 Tons capacity and one sheave with dead line on travelling block
- N°4 Stabilizers
- Hydraulic power unit :
mounted on rig deck composed of :
Nr.1 Diesel engine industrial type, Deutz TCD 16.0 V08 Tier IV or TCD 2015 V08 4V
Tier III
- Sound proof hood (max 80 DB )
- Manifold for mud-air discharge max 80 Bar
- Hydraulic system :
composed of pumps and hydraulic motors, pipes and hoses, blocks, distributors,
valves, hydraulic cylinders and fitting.
- 7.1/2” X 7” Duplex double acting mud pump
Performance : @120 stroke/min
Max discharge : 2376 l/min with 37 BAR liner 7.1/2”
Max pressure : 70 BAR with 1252 l/min liners 5.1/2”
Power input : 217 Hp
Complete of Hydraulic motor joint for connection hydraulic motor to pump and flex
hoses
- Centrifugal Pump : 3000 litres , 3-5 Bar with hydraulic motor
- Foam pump : Triplex CAT mod. 6671 (or equivalent), driven by hydraulic motor,
- wireline winch :
Hydraulically operated ,
Max drum capability 2.000 Mt cable (9000 feet)
Suitable for wire ø ¼” max.
Max Speed 4mt/sec Max pull 1400 daNm
- Control panel, mounted on drill floor on rear position left side near to centre well,
- Electric system EEx-d
- Diesel Electric Generator Unit
- Tool box complete of standard tools for maintenance and positioned on main frame
| |
| |
|
|
|
Id: WR964
 Schramm T450H Drilling Rig - For Sale
Worldrigs ID: WR964
Description :
1985 Schramm T450H Drill Rig
Detroit 6V71 Diesel Deck Engine
GHH 500 cfm / 300 psi Air Compressor
8,047 Hours on Rig
Bean Water Injection Pump
220 ft of Drill Rods Included
Pipe Rack
Basic Tooling Included
Hydraulic Leveling Jacks
Mounted on a 1989 Ford F900 Truck
Ford Diesel Engine
37,730 Miles on Truck
Location : USA
| |
| |
|
Id: WR888
 1500HP Electric Drilling Rig - For Sale
Worldrigs ID: WR888 Specifications
1. Crown-block
1.1 TC-315 Crown Block - Qty : 1 set
- Max. hook load : 3150KN
- Wire rope dia. : φ35mm (1-3/8")
- Main sheave dia. : φ1270mm (50")
- Fast line and dead line sheave dia. : φ1524mm (60")
2. Mast
2.1 JJ315/43.3-K Mast - Qty : 1 set
- Max. hook load : 3150KN
- Working height : 43.3m
- Monkey board height : 26.5m,25.5m,24.5m
- Top open (front/side) : 2.72mx2.5m
- Bottom open (front) : 7m
2.1.2 Mast Raising System - Qty : 1 set
Max. working pressure : 23MPa
2.1.3 Flexile Cylinder - Qty : 1 set
Stroke : 1280mm
2.1.4 Casing Stabbing Board - Qty : 1 set
- Max. lifting height : 6m
- Lifting weight : 200Kg
- Rated pressure : 0.6Mpa
- Air winch (not included)
2.2 Lifting Jack - Qty : 2 sets
100T（equipped with manual oil pump, pipeline）
3. Substructure
3.1 DZ315/9-X Substructure - Qty : 1 set
- Height : 9m
- Rotary table beam clear height :7.984m
- Rotary table bearing capacity : 3150kN
- Three-joint unit rated load : 2200kN
4 Lifting Equipment
4.1 YC360 Travelling block - Qty : 1 set
- Max. load : 3600KN
- Sheave OD : 1270mm
- Sheave No. : 6个
- Wire rope dia. : 35mm
4.3 E-1500-AC Draw works - Qty : 1 set
- Rated power input : 1100KW
- Max. fast line pull : 340KN
- Wire rope dia. : φ35mm (1-3/8")
- Gear : 2+2r stepless speed change infinitely viariable speeds
- Roller size : φ740×1249.5mm
4.3.1 Motor (incl. moisture seperator) - Qty : 1 set
- Power : 1100KW
- Rated voltage : 600V
- Rated speed : 500rpm
- Fan motor : 15KW/400V/50Hz
- Incl. moisture seperator
4.3.2 Two-gear Gear Box - Qty : 1 set
High-speed transmission ratio : 4.9475
Low-speed gear transmission ratio : 8.9494
Auto driller transmission ratio : 7.6806
4.3.3 Hydraulic Disc - Qty : 1 set
- Working brake torque : 165kN.m
- Parking brake toque : 85KN.m
- Emergency brake toque : 250kN.m
4.3.4 Disc Brake Hydraulic Station - Qty : 1 set
- System rated pressure : 8Mpa
- Fuel tank capacity : 100L
- Accumlator : 6.3L×4
- Heater power : 1kW
- Motor power : 3kW×2
- Motor voltage/frequency : 400V/50HZ
- System rated flow : 15L/min
4.3.5 Auto Driller - Qty : 1 set
- ABB Motor power : 45KW/50Hz
- Clutch type : 318H
- Gear box type : GK157-YPB45-4P;
- Transmission ratio : i=54.84
4.4 Hook - Qty : 1 set
- Max. hook load : 4500KN
- Hook mouth open size : 220mm
- Main hook mouth dia. : 180mm
- Secondary hook mouth dia : 120mm
- Meet API 8C
4.6 Swivel (incl. pneumatic spinner) - Qty : 1 set
- Max. static hook load : 4500KN
- Max. Working pressure : 5MPa
- Central tube dia : 75mm
- Connection screw connected with kelly : 6-5/8"REG-LH
- Rated speed : 300rpm
- Meet : API 8C
- Need to add 3"1502 blind block on top, change 1002 male union of connector connected with rotary hose
5. Rotary Table Independent Driva Device
5.1 ZP375 Rotary table independent driva device - Qty : 1 set
5.1.1 ZP375 Rotary Table - Qty : 1 set
- Type : ZP375
- Through0hole dia. : 952.5(37-1/2")
- Max. static load : 5850kN
- Max working torque : 32362N.M
- Gear transimmission ratio : 3.56
5.1.2 Motor - Qty : 1 set
- Power : 720KW
- Rated voltage : 600V
- Rated speed : 600rpm
- Fan motor : 11KW/380V/50Hz
5.1.3 Gear Box - Qty : 1 set
- Type : GZP32D-C
- Rated power : 400kw
- Max. working torque : 9090N.M
- Transmmission ratio : 1.69
5.1.4 Carden Shaft - Qty : 1 set
- Type : BHC290F210
- Ratio : 16000N.M
5.1.5 Brake Tong - Qty : 1 pc
6 Overall
6.1 Drilling line - Qty : 1200m
- Wire rope φ35 6×19S+IWRC-EIPS PF RL
6.2 Deadline Anchor - Qty : 1 set
- Applicable wire rope dia. : φ35
- Rig max. hook load : 3150kN
- Rig max. rope no. : 12
- Sensor type : compressional type
6.4 Air Winch - Qty : 1 set
- Rated air pressure : 0.8Mpa
- First layer rope max. lifting capacity : 50KN
- Rope capacity : 120m，Wire rope dia. : 19mm
6.5 Raising Hydraulic Station - Qty : 1 set
- Main pump rated working pressure : 23MPa
- Main pump max. output flow : 100L/min
- System voltage frequency : 380Vã€50Hz
6.6 HPU - Qty : 1 set
- Main pump rated working pressure : 16MPa
- Main pump max. working pressure : 18MPa
- Main pump max. output flow : 110L/min
- Oil tank capacity : 1800L
- Heat-dissipating method : wind cooling/water cooling
- System voltage frequency : 380Vã€50Hz
6.7 Dog House - Qty : 1 set
- 9800 x 2850 x 2900 mm
- Electric System 220V 50Hz
6.9 Air Receiver - Qty : 1 pc
- 2m3 vertical
6.10 Hydraulic Pipeline - Qty : 1 set
6.11 General Air Pipeline - Qty : 1 set
6.12 Rig up Components - Qty : 1 set
6.13 Grass Hopper - Qty : 1 set
6.14 Whole Skid - Qty : 1 set
- 12500 x 3000 mm
| |
| |
|
Id: WR916
 Reichdrill T690 Drilling Rig - For Sale
Worldrigs ID: WR916
Description :
1998 Reichdrill T690 Drill Rig
CAT 3406B Diesel Deck Engine - rated 500 HP
GHH 1100 cfm / 400 psi Air Compressor
6 Rod Carousel
Water Injection Pump
40,000 lbs of Pullback
High Torque Head and power motors
Table Swings Out
Pipe Rack (holds 300 ft of 4-1/2" x 20 x 3-1/2" reg)
Hydraulic Leveling Jacks
The following parts have been replaced/rebuilt from 2017 - 2020:
Rebuilt Air Compressor (about 1,000 since)
Radiators
Rebuilt Deck Engine (about 300 hours since)
Fuel Tanks
New Transmission
New Clutch
New Cab
Mounted on a Mack truck
Mack Diesel Engine - rated 350 HP
57,000 +- miles
Location : USA
| |
| |
|
|
|
Id: WR824
 National 610E Drilling Rig - For Sale
Worldrigs ID: WR824
Description :
Drawworks
National 610-E (750 HP) drawworks with:
Wichita 325KKB disk brake
1-1/4” Lebus grooving
Mast/Sub
DSI 142ft beam leg mast
650,000 static hook load
22ft Swing-Up sub
Power
(3) Detroit Diesel 12V2000 Gensets (1100HP) with:
800 KW generators
Ross Hill 4 SCR Bay
Traveling/Rotary
Varco TDS-10 (250 ton) AC top drive
Traveling Block (250 ton)
Cont Emsco C275 Rotary Table
Mud System
(2) RSF 1000 (1000 hp) mud pumps
Each driven by (1) DC traction motor
(2) Tank mud system (840 bbl capacity)
80 bbl sloped bottom sand trap
100 bbl premix/pill pit
Mud Systems (Cont)
Trip tank (110 bbl)
(2) Derrick FLC 504 linear motion shakers
(1) Desilter (10) 5” cones
BOP Equipment
(1) 11-5,000# Annular BOP
(1) 11-5,000# Double ram BOP
(1) 11-5,000# drilling spool with:
(1) 2-1/16” 5,000# check valve
(2) 2-1/16” 5,000# manual kill line valves
(1) 4-1/16” 5,000# manual choke valve
(1) 4-1/16” 5,000# HCR choke valve
4-1/16” x 3-1/16””- 5,000# choke manifold
Accumulator
120 gallon bottle capacity, 5 station
Triplex air pump w/20 hp electric motor
(2) Auxiliary air pumps
Remote closing unit f/accumulator
Instrumentation
Martin-Decker Type D weight indicator
Pump pressure gauge
Tong torque gauge
Handling Tools
(2) NOV HT-65 (65,000 ft-lb) manual tongs
(1) 4-1/2”, BJ MGG (250 ton) drill pipe elevators
Handling Tools (Cont)
1) Set 2-1/4” x 108”, 250 ton elevator links
(2) 4-1/2” SDXL drill pipe slips
(1) 5-1/2”-7” drill collar slips
(1) 6-3/4”-8-1/4” drill collar slips
(1) Drill collar safety clamp
Auxiliary Equipment
Gardner Denver PL30A cold start piston air compressor
(34 cfm @ 175 psi) mounted on 240 gal horizontal air tank
Powered by Honda 24 hp gas motor, electric start
(2) Palitek 30D air compressors w/30 hp electric motor
(120 cfm @ 125 psi)
Oilworks Retriever wireline unit
15,000ft-.092” line
(1)Braden PD-12 hydraulic winch (12,000# capacity)
(1)IR Man Rider air hoist (5000# capacity)
Hydraulic power unit
(2) 70 gpm, 100 hp
Brake water cooling unit
2 x 3 x 11, 30 hp centrifugal pumps
19 bbl tank, Heat exchanger
Houses & Misc.
Top doghouse
Parts/workshop house
Water tank (500 bbl) w/(2) 3x4 centrifugal pumps (25 hp)
Diesel fuel tank w/filters & transfer pumps
(8) Pipe racks-18”H
Location : USA
| |
| |
|
Id: WR891
.jpeg "Ideco 2100E Rig - For Sale") Ideco 2100E Rig - For Sale
Worldrigs ID: WR891 Description :
Technical Specifications :
Drawworks
IDECO model 2100-E (s/n E-78) with 1-1/2” LEBUS grooving, FOSTER type 37-AH / 24-AH
air catheads, KOOMEY model CBS-RT2 crown block saver and (2) (GE 752 1000-HP series
wound DC motors JANUARY -2012) with 10-HP blower motors fitted with HUNT vertical air
cure filters. Last Overhaul: ID/TEC 03/2007 (New brake bands, kicker plates: 01/2008)
Auxiliary Brake
Baylor Elmagco model 7040W (s/n 10961W) rated @ 78,000 LB-FT torque @ 50 RPM with
PWM-20 control system, Drillers control, transformer with EXP rig floor emergency stop unit
& emergency stop indicator lamp. Note: Torrington bearing p/n 23040-W-BRC3 (34).
New coupling: 12/2005.
Battery Back-Up System
GBC model 18384–205 (s/n 1086): Input 230 VAC for charging – 240 VDC for Baylor brake
with Siemens 100 AMP, 250 VDC isolating switch and 12 VDC battery 20 N battery bank.
Anti-Collision System
MAN4 Hitec (s/n 038371) AE-1005 power supply unit Kinetic Energy Monitoring System: With
control unit (230V input / 28V output), direct-mount encoder (p/n CHHGTX-0004A), Drillers
display unit, emergency stop, audible alarm and height & weight sensors. New optical sensor :
01/2008. New drum tracking assy (A000565) and sensor (A000382) 09/2008).
Brake Water Cooling System
O&M model ESH-180-2F8 (unit s/n 151494): Designed for 300 GPM @ 55 DEG C ambient
c/w (2) Caterpillar 399 radiator coolers (Dolphin 08/2007) with 96” diameter fans each driven
by Baldor 10-HP (575 VAC, 60 Hz, 1760 RPM, EXP), 40-BBL water tank, Halco Supreme
model 2500 (3” x 2” x 12.5”) centrifugal pumps (2) each driven by Baldor 25-HP (600 VAC,
60 Hz, 1775 RPM, EXP) motor, 3” suction & discharge with check valves & butterfly valves
for 100% redundancy. Control panel with starters, switches, run lights. Sensors for: high
temperature - low fluid level - low flow.
Top Drive (VARCO Upgrade: 5/2011) Not available
DS 11SA VFD Drive Unit Consists of : VFD is available
1 Incomer/ Rectifier Cubicle
1250 Af, Lsi, Blit – In Cb W / Uv Trip
6 Pulse Air Cooled Diode Bridge Rectifier
Surge Suppression Net Work With Status Indicaters
Ground Fault Monitor
Ac Line Reactor
40 Amps Cb For 30 Kava Transformers
80 Amps Chopper Uni
Air Cooled Inverter Cubicle.
Direct Torque Control W/Profibus Communication Card and Speed Feedback Encorder Card
DC Pre Charge Circuit
Inverter Fault Indication Display
420 Kw 600/690 Volt Air Cooled Vfd Modules inculding Mode Filters and Out
Put Reactors
DC Input Isolation Switsh 175 Amps
Enclsure for Plc
Resistor Bank,- Edge Wound Air Cooled Resistor
Control Cubicle
60A Fused Switch For Aux Motor Starter
600 Vac Aux Motor Starter
2 Mavaier Ac Unit
Model 11SA with power distribution center (600 VAC, 60 Hz, 3-PH, 1200 AMPS), drive system
interconnecting multi-conductors providing interface between Drillers panel, top drive and
control electronics and fitted with emergency shutdown :
ABB Inverter Invo 1 and 2 Model
ABB Rectifier
Siemens Plc Panel Model CPU- 315-2dp (S7-300)
Abb Main Circuit Breaker (600 Vac, 1200 Amp)
Drillers Control Panel Varco System-3D-55701-60-1
Bartec Profix TYPE-073136-4025/0010 EX 11 -2 (1) EEX edm LIAL 11B T4, FNR 5068/09,
16X Digital Input Prof ADDR 08, Part No- 140698-2
PTB-02 ATEK 1159.
Quill RPM gauge, torque gauge, pipe handler controls, control, mode selection, torque limit
controls (forward/reverse), emergency stop. System protection shutdowns.
Mast
Dreco Beam Leg model M-14230-1600 (s/n DHW-253-L153-09/81) NOI inspection: 08/2010 :
142ft H x 30ft W x 1,660,000 LBS (GNC) rated @ 1,200,000 LBS API SHL (12 lines).
Racking board capacity: 25,000ft (270 stands 5” DP) with 14 stands DCs & Ingersoll Rand
model BU7A-PTAB air winch (s/n BU8690397). Wind rating: 100 MPH full setback, 115 MPH
no setback. Raising Line: 2-1/4”D, 6 x 41, EIPS, RRL, IWRC, 145’ 6”L w/ open-closed spelter
sockets & 132ft 6”L w/ open-open spelter (01/2012)
Mast Load off Headache Rack : 140 MT
Crown
Dreco model 860C-742 rated @ 650-T SHL (740-T gross) w/ (7+1) 60"OD x 10”D
shaft x 1-1/2" sheaves (Replaced 02/2011).
Casing Stabbing Board
Dreco counter-balanced-adjustable type to API Spec 4E (s/n NDSC-5003): with
positive-engaging brake and Ingersoll Rand model ML500K 0.5-T air winch (s/n 14024)
with remote pendant control.Recert: AOTC # 452 (08/2005).
Deadline Anchor
Superior model E-120 (s/n R-2164) equivalent to Dreco model LOF-100-T: 50-T capacity, 29”
diameter, leg mount for 1-1/2” line and Martin Decker type E-80 tension type load cell sensator.
Drilling Line
Powered reel with 5-7/8” diameter shaft and 7,500ft of 1-1/2” drilling line to API 9A.
Substructure
Dreco Slingshot (s/n E7-475-579): 33ft H x 40ft W x 40ft L (27ft 3” clear height)
rated @ 1,200,000 LBS with 800,000 LBS setback load. Drip-pan enclosure for
rotary and setback, telescopic/adjustable bell nipple. (1) set 45ft L steps, (1) set
25ft L steps, handrails, Allen Get-Away evacuation slide, 6ft W x 44ft L V-door,
2-piece catwalk (5ft W x 60ft L x 21”H). Raising Lines (01/2012):
2 x 1-1/2”D x 750ft L ungalvanized, 6 x 36 IWRC, 1960 BT, RHO, MBL c/w open
spelter socket fitted by resin one end & other end open.
Slingshot Raising System
Lantec model 4135 (2) hydraulic raising winches (NOV Service: 6/2010):
Powered by Abcor HPU (s/n R10-HU-SWN). Lamprell Service: 06/2004,
with Baldor model M4316 (s/n 11/81) (Intersel 04/2003) 75-HP motor
(575V, 69.6 amp, 60-HZ, 3-PH, 1760-rpm, EXP), 200-gal hydraulic tank,
local & remote controls.Raising Lines (01/2012): 2 x 2-1/4”D x 132.6ft L &
145ft L, SWL 47.2 ton, 6 x 36, IWRC, RRL wire rope slings .
BOP Handling System
Dreco 50-Ton SWL (s/n 0156101330-1, 0156101330-2): 25-ton SWL hoists
(2) (NOV Service: 12/2011), hydraulic rack & pinion with remote control console
(powered by Abcor unit). Raising Lines (09/2011): 2 x 1-1/4”D x 43.5ft L, EWL,
6 x 36, IWRC, RHRL wire rope slings w/ 1-1/4" G416 Crosby open spelter
socket both ends.
Doghouse
7ft 10"W x 7ft H x 20ft L with lighting panel, Drillers remote BOP station and Petron remote.
Install BOPC closing unit Remote control panel EEGRB08AP- HMI/PLC Siemens
Simatic Mult Touch Panel
Power Control System
Ross Hill model 1400, 4-bay SCR (s/n 5546/81): (4) AC generator controls
(600V, 1445 AMP, 1550 KVA), (4) GE 1600 AMP circuit breakers
(CAT # TPR-5616-Noarhc), (4) DC SCR bridges (input: 600V, 1470 AMP
AC; output: 750 DC, 1800 AMP DC) with (4) GE 1600 AMP circuit breakers
(CAT # TPY-5616), (1) GE 1600 AMP circuit breaker for MCC
(CAT # TPRR-561-NRHC), (11) GE 7700 line control center panels
(230VAC, 3-PH, 4W, 60-HZ, CAT # 474X0443001), (1) GE 600/220VAC circuit breaker
(CAT # TB-43F) for (3) 220VAC transformers, (1) GE 600 VAC circuit
breaker (CAT # TJK-436F000) for (1) 460VAC transformer. Main in-coming
plug panel with lockouts for DW, MP-1, MP-2 and RT functions.
PCR upgrade by M&I Electric Industries (w/o W834-700-97):
- RHCC upgrade: AC control modules (4),
- 600VAC (primary), 460VAC (secondary) 300KVA xformer for all auxiliary DC drives
- Install 0-200 milli-Amp meters from actuators to read kW load sharing: Run mode 1200-RPM,
35-45 mA. Full load 160 Ma.
- Install DC Amp meters from generator exciters to read load sharing.
- PLC alarm system installed for: (a) engines; low coolant level, high coolant temp,
low oil pressure, metal particle detector, generator overspeed, (b) brake-water
cooling; low fluid level, high coolant temp, (c) mud pit purge panels (2) for H2S
& CH4 (PLC activates alarms via Gaitronics PA system).
Shunt To Series Motor Modfication- Nov – January-2012.
Installed Dynamic Brake Model 1461, Dc Power Cable And Control Cable Inter Connection,
Sproket Slip Pc Card, Hed, Voltage Feed Back Pc Card , Dc Module, And Power Recptacle
For Dc Power Out Lets.
Transformers
- Ross Hill Controls type HSUL (3): 600V-127/200Y, 100-KVA, 60-HZ, 1-PH, Cat #100S9XH6C,
4.9% imp, 150 C Temp Rises (s/n 70101-881, 70102-881, 70103-881).
- Sunbelt: 600V/480Y/277, 300-KVA, 60-HZ, 3-PH 5.64% imp, 150 C Temp Rise (s/n 22459).
- ITC type HTUL: 600V/240Y, 25-KVA, 50/60-HZ, 3-PH, Cat #2832H3DC, 3.6% imp, 150 C Temp
Rise, (s/n 726856-10/81).
- Victor (UAE) model GPTS/100K: 100-KVA, 50/60-HZ, 3-PH, Class H, 115 C temp rise, 600V
delta primary, 480V star secondary, 96A primary, 120A secondary, standard IEC726 (s/n 18216/06).
- Marcus type IW: 600V/416/240, 112-KVA, 112-HZ, 3-PH, 3.4% imp, 150 C Temp Rise
(s/n 8803-797).
Aux. Brake Controller
Baylor model PWM-20 for model 425L Drillers console.
A/C Units (2)
Trane model TTA120-A300BC, 10-TON single compressor split units
Cable Grasshopper
8ft W x 30ft L electric cable tray skid with oscillating cable arm to rig floor and (1 lot) cable trays
with covers.
Generators
KATO synchronous, brushless, 2-bearing AC (1500 KW, 347/600V, 1875 KVA, 3-PH, 60 HZ,
0.8 PF, 1200 RPM, 1806 AMP, 90 DEG C temp rise, field volt 100, field AMP 4.3) :
1. Model 1500-685361111 - type 21676 - Cat. #6P7-2050 - s/n 36739-85926-1
2. Model 1500-685361111 - type 21676 - Cat. #6P7-2050 - s/n 36741-85926-2
3. Model 1500-680361111 - type 21676 - Cat. #6P7-2050 - s/n 36738-84485-3
4. Model 1500-680361111 - type 21676 - Cat. #6P7-2050 - s/n 36740-84485-2
DC Motors
GE-752 and Juliot series -wound rated at 1000-HP continuous (750 VDC, 1150 AMP, 965 RPM)
with Class H insulation, pressurized connection box, auxiliary lockout switch and 10-HP
(460 VAC, 60-HZ, 3275 RPM, EXP) blower motors mounted on HUNT model 752V-RHB/LHB
vertical air cure filters. Note: Power cable connections are pin type and 20-pin receptacle is
Pyle National male (p/n ZREP 20332 PN). Refurbished January 2012
Main Engines (4)
Caterpillar series D3512 DITA (4), 1435-HP/1000-KW @ 1200-RPM fitted with
Woodward EG-10P actuators, injector group 4P 9075, turbo group 12 8187, marine duty
air cleaners, Spinner II oil centrifuges with AMOT metal particle detectors & oil level switch
gauges, Racor primary fuel filters, Bicera crankcase explosion relief valves, 12” exhaust outlets,
HMSO protection system for low oil pressure, high water temperature and over speed air
inlet shutoff.
- CAT #1 - 3512 Arrangement # 2W 8869 (s/n 67Z 01953)
- CAT #2 - 3512 Arrangement # 2W 8869 (s/n 67Z 02173)
- CAT #3 - 3512 Arrangement # 2W 8869 (s/n 67Z 02213)
- CAT #4 - 3512 Arrangement # 2W 8869 (s/n 67Z 02212)
Engine Cooling
O&M (drawing # 10569-402) (s/n 1-151426/7/8/9) desert-duty jacket water heat exchangers with
updraft design rated @ 150 PSI MAWP (O&M #128156) & converted to standard over-sized
water tanks with independent water pump to after-cooler.
Fuel Tank #1
Crude Settling Tank: 8.5ft D x 30ft L x 300-BBL (48m3) horizontal, cylindrical on
10ft W x 40ft L x 3-runner skid with 27” manhole, 2” vent, 4” fill connection, 2” drain,
sight-level gauge and 3” x 2” centrifugal transfer pump with 3-HP, 60-HZ, 460VAC motor.
Fuel Tank #2
Clean Crude Tank: 9.8ft D x 26ft L x 346-BBL (55m3) horizontal, cylindrical on
8ft W x 33ft L x 2-runner skid with 24” manhole, 2” vent, 4” fill connection, 2” drain
and sight-level gauge.
Fuel Day Tank
HEMT 50-BBL (7.5m3) skidded crude day-tank: With Roper type 1 gear transfer pump driven by
3-HP 460V 60-HZ motor.
Diesel Tank
HEMT 60-BBL (10m3) rectanguler (s/n A318-2333) on 19.7ft L x 8.2ft W x 5.9ft H skid with
fuel filtration unit and Roper type 1 gear transfer pump driven by 3-HP 460V 60-HZ motor.
Air Compressors (2)
Gardner-Denver model EDFQLC (s/n R-00329, R028331), oil-injected, rotary screw type rated
@ 309 SCFM (each) @ 125 PSI driven by model 24CA-3240 AC motor 75-HP, 575VAC, 60-HZ
(s/n 97600010, 97600011) inside high ambient NEMA 4 enclosure (spare air-end common
for Rigs -10/31/32).
Cold-Start Compressor #1 Not Available
Air Dryer (2008)
Great Lakes model GPS-1000-N4-116 (s/n 31303) heatless, regenerative dessicant (p/n 692001)
type, 1000 SCFM flow @ 100 psig with ASME coded twin towers rated @ 150 psig, solid state
timer, pilot air filter, 110V Nema 4 control, model GC-1000-SA coalescing pre-filter and model
GP-1660 particulate after-filter.
Vertical Air Receivers (3)
Horizontal Air Receivers (2) Not Available
Air Hoist : Ingersoll-Rand type FA2.5-16M rated @ 2.5-T SWL (s/n 73185)new installed 02/2012.
Air Hoist : Ingersoll-Rand type FA5-MR24MK1G rated @ 4.5-T SWL (s/n A017075) new
installed 02/2012.
Man Rider : Not Available
Mud Pumps (2)
1.Emsco Model T-1600 triplex, 7-1/2" bore x 12" stroke (s/n 74, 102) with Southwest
style 2-piece forged fluid ends (p/n KOP Femt1316SUCSW, Femt1316DISSW), Ideco
unitized V-belt pump drive, HYDRIL type K-20 5M WP pulsation dampener (RX-39),
suction/discharge strainers, 0-10M PSI pressure gauge, Falcon type C flanged RRV
(1,500-5,000 PSI operating range), Demco 2” 5M WP bleed-off valve, Halco type S
(1-1/2" x 2"R x 8-1/2”) centrifugal liner wash pump (s/n 04181) with Marathon 3-HP
EXP motor. Each pump powered by (2) GE-752, 1000-HP seres-wound DC motors
with 10-HP blower motor (January -2012) mounted over Hunt vertical air cure filter.
Power ends fitted with dual electric & mechanical lube system.
S/N 74: New bull gear & pinion (02/2004). New bearings main/pinion (08/2007)
S/N 102: New bull gear, pinion, eccentric & crosshead bearings (03/2005)
Mud Pump (1)
Loadmaster model LMF-1600 triplex, 7" bore x 12" stroke (s/n LMF-101) with single piece forged
fluid ends, metal to metal liner lock system, self-aligning rids with dual tube rod clamps, unitized
V-belt drive (8/8VP3000 Kevlar V-belts), model KB-75 5M WP pulsation dampener (RX-39),
suction/discharge strainers, 0-40,000 kPa pressure gauge, Retsco 3” type C flanged RRV
(1,500-5,000 PSI operating range), 2” 5M WP bleed-off valve, liner wash pump (1” x 1-1/2")
with 3-HP EXP motor (230/460V, 3-PH, 60-HZ), powered by (1) GE 752 1000-HP series -wound
DC motor(A) Jouliot 1000 HP Series Wound DC Motor (B) (January 2012)each with 10-HP
blower motor mounted over Hunt Air Cure filter. Power end fitted with triple redundant lube
system : Internal splash/gravity feed, internal gear-driven pump, external gear pump driven
by 480V, 3-PH, 60-HZ EXP electric motor and pressurized lubrication to lower crosshead slides.
Mud Lines & Manifold:
Gate Valves (6) : Demco 5” 5M WP
Gate Valves (4) : Demco 3” 5M WP
Gate Valves (4) : Demco 2” 5M WP
Gate Valves (1) : Demco 4” 5M WP
Plug Valves (4) : 2” 10M WP with Fig.1502 unions (cement manifold)
Mud Gauges (2) : Oteco 0-6000 PSI
Bleed-off Choke : CIW 2-1/16” 5M WP manual choke
Transmitter Flange : Petron instrument flange with Fig.1502 misaligning unions
Dual Standpipes : 4”ID 5M WP x 160 DEG goosenecks with Fig.1002 top unions
Cement Standpipe : 2” x 12m x 10M WP with flexible hose
Dual Sub Lines : 5” 5M WP with Fig.1002 unions
Dual Kill Lines : 2” XXHVY 10M WP
HP Hoses - Standpipes to TDS Swivel (2) : Not Available
HP Hoses - Sub Base to Standpipe Manifold (3) : Not Available
HP Hoses - Mud Pumps to Sub Base to Standpipe Manifold (5) : Not Available.
Rotary Table
Ideco model 375-E (s/n 176): Rated bearing deadload capacity 700-T. Rated
rotating load 434-T. Ideco model T-2 2-speed gearbox (s/n 5305900), GE-752
1000-HP series -wound DC moto (January 2012) with 10-HP (460VAC, 60-HZ,
3275 RPM, EXP) high-output blower motor mounted over HUNT vertical air
cure filter. Last Service: ID/TEC 09/2005.
Master Bushing (2)
CAM-Tech model MPCH (s/n NDSC-5236) & (spare) Varco model MPCH
(s/n R-2157): 37-1/2” pin drive c/w API bowls (#1-2-3), 4-leg & 2-leg slings,
bit breaker adapter plate.
In Service: 01/2007.
Hook-Block
Ideco Shorty model UTB-525-6-60 (s/n 618): 525-T API rating with unitized hook
and (6) 60” OD x 1-1/2”D grooved sheaves. Hang-off sling: 1-1/4” D x 114ft L.
NOV Service: 02/2010.
Swivel
National Oilwell model P-500 (s/n T-5268): API 500-T rating with 5M PSI WP - 15
DEG API angle gooseneck, 4” Fig.1002 union, 7-5/8” LH REG connection and
spare washpipe assy (p/n 703429-G1U).
Kelly Spinner
Varco type 6600 pneumatic (s/n 6D15X545): With (1) motor for RH/LH rotation,
control lines, foot valve and 6-5/8” REG LH box-up/pin-down.
Kelly
Inter Drill 5-1/4” hexagonal, 6-5/8 REG LH box x 4-1/2 IF pin (6-3/8” OD x 2-13/16” ID)
x 40ft L x 37ft working length (s/n K5BA004).
Choke Manifold
CIW (s/n 00-1293) 10M WP (11) valve, H2S trim: EEC Ultraflow type E-C 3-1/16” 10M
WP (BX-154) hydraulic drilling choke with control panel (see below), J-2 transmitter
flange and EEC style H-2 3-1/16” 10M WP manual choke. Wesco Recert: 10/2007.
- MGV (1) : CIW model FC 2-1/16” 10M WP, BX-152
- MGV (6) : CIW model FC 3-1/16” 10M WP, BX-154
- MGV (2) : CIW model FC 4-1/16” 10M WP, BX-155
- MGV (1) : CIW model FC 4-1/16” 5M WP, RX-39
- MGV (1) : CIW model FC 3-1/8” 5M WP, RX-35
Choke Control Console (2008)
MCM (CIW style) with digital pump stroke counter, 0 - 40,000 kPa drill pipe pressure gauge,
0 - 70,000 kPa casing pressure gauge, choke position indicator, choke speed adjustment
switch, hydraulic fluid supply with back-up hand pump, hydraulic pressure gauge and limit
switches-brackets-clamps for two pumps.
(Spare Choke Control Console) Valvcon (CIW style) with EEC digital pump stroke counter,
0 - 40,000 kPa drill pipe pressure gauge, 0 - 70,000 kPa casing pressure gauge, choke
position indicator, choke speed adjustment switch, hydraulic fluid supply with back-up
hand pump, hydraulic pressure gauge and limit switches-brackets-clamps for two pumps.
BOP Closing Unit
BOPC DCS TM 9 Station Control System Cordyne Industrial Motor And Drives
330-2K50-E40GD-U23M-6-1 (s/n 6131): 330-GAL 6-station with 400-GAL reservoir, (22)
Nippon 15-GAL accumulator bottles, (2) Graco model 208-003 type K-50 air pumps
(45:1 ratio, 3.3 GPM each, s/n A5535), Gardner-Denver model PS-172 triplex
(type UET40-HTHT-600) with WEG40-HP explosion proof motor (460 VAC, 1770 RPM).
GPES Recert: 12/2005.
- Accumulator : Model TB3305B.
- Manifold : Model UMGT2R06P10 hydraulic w/ 1”, motor-driven, failsafe regulator
- TR Regulator (auto) : Model PTR-5-1500-0-10 (s/n 9018)
- TR Regulator (manual) : Model MTR-5-1500-0-10 (s/n 04020)
- Driller’s Remote : Model AOGPR006-FC, 6-station air-operated w/ open/close display
- Toolpushers Remote : Model EE GRB08AP-HMI/PLC Siemens Touch Panel
- Air Inter-connect Cable Assy : Model 100-JG37JG
- Air Shuttle Valve Assy : Model SV12SV19 (operates 4-way c/valve - both remotes)
- Low Pressure Alarm : Model LHP - Low Fluid Level Alarm: Model LFL
- Pipe Rack Assy : Model PRMG40-13 32’L with 15 x 1” x 6M WP steel control lines
- Control Hoses : Spec. 070-5000 5M WP S/S armored (10 x 34ft L, 2 x 38ft L, 12 x 8ft L)
Drillers Console
Petron model IDS-2000 RIG SITE MONITOR with Pentium-based computer,
1.4 KVA UPS (2), remote printer and display with graphics printout and DrilGraph
remote. Sensors for active pits (5) including: PVT, trip tank, flow-out, pump SPM,
TD, ROP, bit tracking, pipe velocity, hook load, WOB, pump pressure, rotary RPM,
rotary torque. IDS indicator model HKL-A000063. IDS indicator sensor
model P000010 (2).
Weight Indicator :
- Petron type EB (16”) model AWE9-1 (s/n 0325).
- MD-Totco type EB (16”) series AWE (s/n 1024).
- Petron type E80 (s/n M2073) tension type sensator.
- MD-Totco type E80 (s/n 0202309) tension type sensator.
Hydraulic Analog Gauges/Sensors: for tong torque, pump PSI, flow indicator, trip tank
Auto Driller
Mattco Bearcat (s/n 8036): with pneumatic controller and feedback.
Drift Recorder
Martin Decker-Totco 8 DEG & 16 DEG: double recorders c/w accessories.
PA system
Atkinson Dynamics Intercoms Model AD 26-8 Gaitronics Page-Party with 12-stations
(rig floor/choke manifold/shaker tank/suction tank, workshop, offices [3],
SCR/substructure/guard cabin/elect store) and tied in with the PLC via a tone
generator for CH4, H2S and enginge control audible alarms.
Monkey Board PA
Atkinson Dynamics Intercoms Model AD26-8: For Driller-Derrickman with type
hands-free remote at monkey board.
Rig Workshop
Toes design 3-section Mechanic/Welder workshop, store & cool-store on 3-runner skid.
Each section: 10mL x 3.2mW x 3.2mH with roof and 2-TON SWL lifting beams over
Welders workshop. Includes small air receiver
Diesel Genset (Unit s/n NDSC-5232)
Engine :
CAT D3306 DITA (s/n 85Z10817, a/n 7C 9312), 1500-RPM, 296-HP with
Woodward type PRG governor
Alternator : CAT SR4 (s/n F5A07024), 400V, 1500-RPM, 244-KVA, 195-KW, 50-HZ
Fuel Tank : NSF 2m3 x 1.9mL x 1.4mW x 1.6mH x 0.9-T (JN 8017-04/08)
Motor Genset (Unit s/n NDSC-5234)
Motor : Marathon 4J444T: 100-HP/600VAC/60HZ/1185RPM (s/n AE580153)
Alternator : Newage model 350-28700, 415VAC, 50-HZ, 65 KW (Intersel 10/2006)
Rig Offices
Air-conditioned, 4-office, laboratory, mess, storeroom with (6) cabins, each on
3-runner skid, mounted on two (2) 3-runner master skids with (2) independent
50-KW genset power supply sources:
Skid #1 :
- Toolpusher cabin with TP office (front) and Materialman (rear) with WC
- PE cabin with office, WC
- Client cabin with office, shower, bedroom. Installed: 10/2005
Skid #2 :
- Service Company cabin with (4) rooms (4 beds) e/w ablution (s/n NDSC-5270)
- Senior mess and CM/CE office
- 55m3 potable water tank with (2) pumps, filtration and chlorine injection
Skid #3 :
- Mud lab cabin with 1-man accommodation
- 2-room cabin with 2 beds for TP & PE
- Safety training cabin. Installed: 12/2005
Skid #4 :
CH Mech/ CH ELECT: Single skid 10.5mL x 3.5mW with furnished,
WC/shower & bedroom. Installed: 2011
DP Bins (10 : 37ft L x 8ft W on 3-runner skid (35-T SWL)
DC Bins (04) : 37ft L x 8ft W on 3-runner skid (35-T SWL)
Junk Bins (3) : 30ftL x 7ft W on 3-runner skid (35-T SWL)
Pipe Racks : 42”H x 27ft L (8), 20”H x 27ft L (8), 42”x13”L (2)
Seatainers (5) : 20ft L x 8ft W x 8ft H (10-T SWL)
Tool House : 27ft L x 7ft 10"W x 8"H on 3-runner skid.
Mobile Camp
(24) air-conditioned cabins, each on 3-runner skid, mounted
on nine (9) 3-runner master skids.
Accomodation Rig & Camp
Rig Senior Staff : 9 Beds
Camp Senior Staff : 30 Beds
Camp Junior Staff : 68 Beds
Total Beds : 107
M/Skid 1 : (3) cabins: (6) senior rooms (24 beds)
M/Skid 2 : (3) cabins: (4) senior rooms (8 beds) with center ablution
& (2) junior (8 beds)
M/Skid 3 : (3) cabins: (3) junior rooms (12 beds), (1) senior room (1 bed).
Clinic-Medic room (2 beds including sick bay bed) with center ablution (2)
M/Skid 4 : (3) cabins : (6) senior rooms (9 beds)
M/Skid 5 : (3) cabins : (6) senior rooms (11 beds) with center ablution (1)
M/Skid 6 : (3) cabins, 2) junior rooms (8 beds), dry store, cold store
M/Skid 7 : (3) cabins : senior mess, galley, junior mess ( up graded)
M/Skid 8 :
(3) cabins : ablution block, laundry, GRP water tank (55m3)
(2) cabins : 2 x 4-man JS sleeper
Mosque : 30ft L x 10ft W skidded with AC.
RO Unit : Ecowater Systems model ESM-18CE (2.8m3/hour max output)
with booster pump and model LBR8 UV sterilizer. Installed : 08/2004.
Skid 9 – Camp Generators :
Engines (2) : Caterpillar model 3406 TA (S/N 2WBO2668/2WBO2667,
A/N 4W3805), 1500 RPM, 362-HP, 270 kW with Woodward type PRG
governor and fitted with crude oil heaters.
Generators (2) : Caterpillar model SR-4 (S/N 6BA02075/6ba02080,
A/N 5N8662), 1500-RPM, 300-KVA, 240-KW, 400VAC, 50-HZ, 433-AMP.
Electrical DB : Indent # DC61/4/30916 PDO-A1, Holec # 242.402-1985,
System 3-PH, 4 wire, 414V – 50C/S rated operating voltage, 1200-AMP
rated current main bussbars, 50KA – 1 SEC rated short-time withstand
current, 110 KA rated peak withstand current, IP54 degree of protection.
Fuel Storage : 12,000L settling tank with 4,000L day-tank and transfer pump
Skid 10 – Camp Workshop
20ft L x 8ft W x 9ft H sea container with shelves, workbench, vice, lights, AC
and ABAC model B3800-200CT3-V400CE portable air compressor
(lot #387066-0010) with model 3700060 air end (lot #016781-0299) and
KEW 3-PH type Y90L-2 230/240V 2.2-KW 50-HZ induction motor
(unit s/n NDSC-5287)
Guard Cabin : 18ft L x 10ft W X 8ft H skid with 1.5-T air-conditioner.
Rig Mosque : 13ft L x 10ft W x 8ft H skid with 1.5-T air-conditioner.
Training Room
Fire Alaram System : Model No CFP 2/4/8/ Zone Conventional Fire Alarm
System Connected to all the cabins in the camp site And Installed Control
Panel in the Sr Mess Room. Installed May 2012.
| |
| |
|
Id: 9000-420
 Drillmaster 1200M Drill Rig for sale
Worldrigs ID: WR422 Drawworks:
DRILLMASTER 1200M New (2009) Single Drum Drawworks, 1,200 Hp
Lebus grooved for 1-1/4” Drilling Line, Hydraulic operated Makeup
& Breakout winches, Over-Running Clutch, Air Driller’s Console, Crown-O-Matic standard chain drive for rotary table.
Compound:
2-Engine, In-Line Compound For rotary & Drawworks drive.
BRAKE:
Superior 4 section 60” Hydromatic Brake
Drawwworks Power:
No. 1 – CATERPILLAR C-18 Diesel Engine S/N# WJH01256,
600 Hp Rated, w/24 Volt Electric Start, Radiator, Gauges,
Allison S-6610 6 speed transmission Air clutch
Hours# 18,307
No. 2 – CATERPILLAR C-18 Diesel Engine S/N# WJH01260,
600 Hp Rated, w/24 Volt Electric Start, Radiator, Gauges,
Allison S-6610 6 speed transmission Air clutch
Hours# 17,854
Hydraulic power unit 40HP for tong winches and boom line winch
Mast:
DRILLMASTER New 2009 SN#09864 20’1 1”W x 136’H Cantilever Mast,
With a Gross Nominal Capacity of 915,000 Lbs. and a
650,000 Lb. Static Hook Load, Max wind 91 Knots,
with ten (10) lines. Crown Block w/ (5)42” Sheave Cluster &
1-56”Fast line Sheave grooved for 1-1/4” diameter drilling line.
Each Crown Sheave wire rope groove is flame hardened.
Each Crown Sheave is fitted with Timken roller bearings and grease seals.
Derrick complete with Crown Safety Platform, 20 finger Racking Board W/ electric mule, Bridal Lines, Tong Counter Weights, Survey Line Sheaves,
Tugger Sheaves, Ladder, Derrick Climber, Geronimo line,
4” Standpipe & Manifold and Derrick Stand.
Last Certification 8/23/2009
Substructure:
DRILLMASTER New (2009) 29’10”W x 20’H x 48’8”L
(4) Box-On-Box Substructure w/ Rotary Beams, V-Door Ramp,
Stairs, (2) Air Receiver Tanks, NATIONAL Deadline Anchor, Hydraulic power unit 40HP, Safety Rails, inside Catwalk Trolley, 7’W x 14’L built in Tool
Room (ODS) (3) Stairs, Outside wall Winterized, Jacking door,
12’ X 12’ Setback spreader, internal stairway, Vapor proof lighting,
Skidded with oilfield tail rolls
Pump: (Primary)
CNPC Equipment F-1000 Triplex Mud Pump New 2009,
S/N BZ11-040E, 1,000Hp.
w/ LANZOU Pulsation Dampener
MF 5,000 Psi. Pressure Gauge
FIVE STAR 6”x8”x14” Charging Pump p/b TECO 75 Hp. Electric Motor,
Chinese 3”Shear Relief Value, Master Skidded w/ (2) Engines belt compound
Pump Power
CATERPILLAR C-18 Diesel Engine S/N WJHO1709,
575 HP w/24 Volt Electric Start, Radiator, Gauges,
V-Belt Drive EATON 18CB500 Air Flex Clutch,
Mounted Pump Master Skid.
Hours # 14,911
CATERPILLAR C-18 Diesel Engine S/N WJH01683,
575 HP w/ 24 Volt Electric Start, Radiator, Gauges,
V-Belt Drive EATON18CB500 Air Flex Clutch,
Mounted Pump Master Skid
Hours#14,859
Pump (Secondary):
CNPC Equipment F1000 Triplex Mud Pump New 2009,
S/N BZ11-024E, 1,000 Hp.
w/ LANZHOU Pulsation Dampener ,
MF 5,000 Psi. Pressure Gauge
FIVE STAR 6” x 8” x14” Charging Pump p/b WORLDWIDE 75 Hp. Electric motor,
3” Shear Relief Valve, Master Skidded w/ (2) Engine belt compound
Pump Power
CATERPILLAR C-18 Diesel Engine S/N WJH-1696,
575 HP w/ 24 volt Electric Start, Radiator, Gauges,
V-Belt Drive, EATON 18CB500 Air Flex Clutch,
Mounted pump Master Skid.
Hours#14,188
CATERPILLAR C1-8 Diesel Engine S/N WJH-1713,
575 HP w/ 24 Volt Electric Start, Radiator, Gauges,
V-Belt Drive, EATON 18CB500 Air Flex Clutch,
Mounted Pump Master Skid.
Hours#14,209
Rotating Equipment:
ROTARY TABLE
Liberty RT-275, New 2009, complies with API split master bushings,
W/ chain drive sprocket, 500 Ton capacity
Swivel:
Ideco 450
Kelly:
5-1/4” x 42’ Hex Kelly W/ HDS Kelly Drive Bushing
Kelly Spinner
OWI 1500 Kelly Spinner S/N 00474B w/ (2) Air Motors,
Kelly Valves:
Upper Kelly Valve.
Lower Kelly Valve
Traveling Equipment:
Sentry Rig Equipment Company
350 Ton Capacity New 2009
4G350 Traveling Block w/ (5) 36” Sheaves, 1-1/4” Line,
Unitized “Hydra-Hook” 350 Ton Capacity
Blowout Preventer & Valves:
1 EACH -13-5/8" X 5000# Jiangsu Xianz hong Petroleum
Double Gate BOP, Top & Bottom Stud configuration
Including - 1set of 5" Pipe Rams Blocks & 1set of Blind Rams,
With 2 - 4" outlets on each side of Body of BOP
1 EACH - 13-5/8" SHAFFER ANNULAR BOP
Includes rubber element
1 EACH - 13 5/8" X 5000# Type D DRILLING SPOOL W/ - 2" SIDE OUTLET & 3" SIDE OUTLET
[MATCHED TO CHOKE MANIFOLD
1 EACH - CHOKE MANIFOLD - 3" X 5000# COMPLETE
INC - STEEL FLEX LINE W/ FLANGES TO CONNECT
TO BOPS OR DRILLING SPOOLS
Closing Unit:
2008 Jiangsu Xianz hong Petroleum Model FXQ640-6
Closing Unit Accumulator, 6 Station,
Rig Floor Controls and monitor panel,
Complete W/ 15 Bottles, 30 HP Cat 3517 Charge Pump, 2 Air Pumps, & set up for Nitrogen Bottle Backup
Suitcase Closing Unit Skid 7’-1 0” x 35’ with junk basket
Choke Manifold & Valves:
Jiangsu Xianz hong Petroleum Choke Manifold w/ (1) 5-Way Cross, (3) 4-1/16”x 5M
Gate Valves, (4) 2-9/16” x 5M Gate Valves, (1) Manual
Adjustable Chokes, Hydraulic Adjustable Chokes, Mounted Oil Field Skid.
W/ 2 Kill Valves- & 2-Choke Valves mounted at drilling spool
Rig Houses:
Dog House,
DRILLMASTER 9’ 1 1”W x 39’ 1 1”L
Doghouse / Change house Combination w/ 17’5”L
Driller’s House w/ Knowledge Box (5) Lockers, Bench Storage, Heater, Lights.
5’L Breezeway, 1 7’5”L Change House, w/Bench Storage, (16-Lockers,
Cabinets, Heater & Lights. Oil Field Skidded.
Generator/Utility Houses:
DRILLMASTER 1 1’10”W x 37’9”L x 11’ 6” T
Utility House w/Lights, Oil Field Skidded to include the following items.
No #1 380 Kw. AC CATERPILLAR Generator Package Powered by Caterpillar C-15 Diesel Engine S/N JRE01987 w/ 24 Volt Electric Start, Radiator, HD Air cleaner Gauges. Marathon 572RSL4025 Generator End SN# 554268-1106, complete with Oil Field skid.
Hours# 14,574
No #2 380 Kw. AC CATERPILLAR Generator Package Powered by Caterpillar C-15 Diesel Engine S/N JRE01970 w/ 24 Volt Electric Start, Radiator, HD Air cleaner Gauges. Marathon 572RSL4025 Generator End SN# 554273-1106, complete with Oil Field skid.
Hours# 15,717
NO. 1 GARDNER-DENVER EBE99N New 2006
Electro Saver II Rotary Screw Air Compressor S/N# S237421,
P/b TOSHIBA 30 Hp. Electric Motor, Mounted 240 Gallon Horizontal Tank.
Hours# 15,128
NO. 2 GARDNER-DENVER EBE99N New 2006
Electro Saver II Rotary Screw Air Compressor S/N# S237419,
P/b TOSHIBA 30 Hp. Electric Motor, Mounted 240 Gallon Horizontal Tank.
Hours# 14,400
SIEMENS Interlock Panel, 600 Amp 480 Volt Main Lockout Disconnects breakers.
ALLEN BRADLEY Electrical Load center with magnetic starter & breakers,
SQUARE D 225 amp 240 volt panel with breakers
SQUARE D 75KVA Transformer 480 volt to 240 volt
DRILLMASTER 7’9”W x 13”H x 43’1”L Electrical
Suitcase.
DRILLMASTER 2’5”W x 1 3”H x 36’3”L Electrical
Suitcases.
Mud System:
DRILLMASTER 9’6”W x 7’H x 34’5”L, 394 Bbl. Suction Tank
10’L Covered Porch, (3) Compartments,
(3) MAX 2000 Mud Agitators p/b TECO 25 Hp. Electric Motors,
Sloped Bottom, Top Mounted Walkways, Safety Rails, Lights, Oil Field Skidded.
FIVE STAR 6”x8”x14” Centrifugal Mixing Pump S/N 5284, p/b BALDOR 75 Hp. Electric Motor.
FIVE STAR 6”x8”x14” Centrifugal Mixing Pump S/N 5284, p/b BALDOR 75 Hp. Electric Motor.
With internal jetting system, 3 dump gates.
DRILLMASTER 9’6”W x 7’H x 34’7”L, 394 Bbl. Shaker Tank
10’L Covered Porch, (3) Compartments
MAX 2000 Mud Agitator Agitators p/b TECO 25 Hp. Electric Motors,
Sloped Bottom, Top Mounted Walkways, Safety Rails, Lights, Skidded.
With internal jetting system, 3 dump gates.
FIVE STAR 6”x8”x14” Centrifugal Mixing Pump S/N
5269, p/b BALDOR 75 Hp. Electric Motor.
FIVE STAR 6”x8”x14” Centrifugal Mixing Pump S/N
5283, p/b BALDOR 75 Hp. Electric Motor.
SHALE SHAKER, Fluid Systems Inc., Single Screen,
Linear Motion Shale Shaker S/N2450,
SHALE SHAKER, Fluid Systems Inc., Single Screen,
Linear Motion Shale Shaker S/N3089,
NOI DSN-ZH-10CTX Desander S/N 8714-5732,w/ (2) 10” Cones.
NOI DSL-10GG-4CTX Desilter S/N 8714-5731,w/ (10)4” Cones.
DRILCO “Deep Pit” Degasser p/b TECO 10 Hp. Electric Motor
Bubble Buster: Geothermal Type Bubble Buster
Mud House:
DRILLMASTER 9’ 1 1”W x 26’L Mud House w/Mud Hopper, Test Sink, Ventilation Fan, Electric Heater,
Lights, Double Side Door, (2) End Doors, Skidded. Includes 7’H Tri-Stand on one end the other end sets on suction tank.
Fuel Tank:
DRILLMASTER 7’1 1”Wx8’Hx30’L, 13,860 Gallon Fuel Tank
w/ (2) AMT 1/2 Hp. Fuel Transfer Pumps p/b BALDOR 1/2 Hp. Electric Motors,
With Three (3) Compartments, Combo Lubester Oilfield Skidded.
Water Tank:
DRILLMASTER 10’10”W x 8’1”H x 35’L, 529 Bbl. Water Tank
w/ 10’L Covered Extension, Pump Room, OilField Skidded
FIVE STAR 3”x4”x1 1” Centrifugal Water Pump
S/N 5420, p/b TECO 20 Hp. Electric Motor.
FIVE STAR 3”x4”x1 1” Centrifugal Water Pump
S/N5267, p/b TECO 20 Hp. Electric Motor.
Instrumentation:
Weight Indicator
Mud Gauges.
Ancillary Equipment:
DRILLMASTER 5’W x 2’4”H x 60’L, 2-Section Catwalk w/ Steel Deck and stands for string blocks.
Pipe Racks 5 Sets 29” x 30’ 1 set 29” x 12’ 1 set 41” x 30’
FIVE STAR “Retriever” Electric Measuring Device S/N 862, w/ 15,000 Ft. of. 092 Wire line
2 sets drill pipe elevators 5”
2 sets of drill pipe slips 5”
2 sets of drill collar slips 7” & 9”
2 sets tongs with all head for pipe & casing
2 sets of safety clamps
Mud box:
108” 4” elevator bails
Crossover, bottom hole, lifting Subs
Air Hoist Air Wrench, Model HUL40, S/N-REM10370, 9000 lb. Pull Rating
Air Hoist Air Wrench, Model KSUL, S/N-REM13962, 10,500 lb. Pull Rating
4,000 Ft. of 1-1/4” Drill Line, Mounted Spooler Stand
3-1/2” X 5,000 Psi. Rotary Hose
Vibrator Hose 2 Each 3 ½” x 18’
Rat hole
Mouse hole
8 rig matting boards
Small hand tools & wrenches
Fluorescent & Mercury-Vapor Rig Lights & Wiring Explosion proof
Atco Office/ living shack all electric w/ oil field skid
| |
| |
|
|
|
Id: 9000-399
 National 1320 - 2000 HP Drilling Rig for Sale
Worldrigs ID: WR163 Description
Mast & Sub :
Lee C. Moore, 142’ High Cantilever Type Mast, S/N: T3839 with Cantilever
Substructure, S/N: 54H048, 36’W X 25’H X 75’L, 1,000,000 LBS Gross Nominal
Capacity with 12 lines. Setback capacity 500,000 lbs. and 800,000 lbs.
complete with Racking Board Platform. Drillers and Off-Drillers Side Top Dog,
Drillers’ lockers, storage boxes and knowledge box, catwalks with (12) Pipe Racks
Drawworks :
National 1320 UE, 2,000 HP, 1-3/8” Lebus Grooved Drum Draw Works with
(2) GE-752, 1,000 HP DC Traction Motors, complete with National Make-up
and Break-out Catheads, Over-running clutch, air drillers console and
Baylor Elmagco Model 7838 Electric Brake, S/N: 7299.
Rotary :
National C-275 27-1/2” Rotary Table with Independent Drive, with
(1) GE-752,1,000 HP DC Traction Motors, complete with emergency
mechanical independent drive.
Traveling Block :
National, Model 660-G500 (Integrated), 500 Ton Capacity with (6) 60” Sheaves, 1-3/8” Line.
Swivel :
National Model P500, 500 TON Swivel
Triplex Mud Pumps :
(2) Gardner-Denver PZ-11, 1,600 HP Triplex Pumps, each with (2) GE-752, 1,000 HP DC
Traction Motors, (1) Hydril Model K-20-5000 Pulsation Dampener and
(1) 6 x 5, 70 HP centrifugal charge pump
Generators Diesel / AC :
(3) Caterpillar 3512C, 1,476 BHP (1101 BKW) @ 1200 RPM, 2006 EPA/CARB
Non-Road Mobile Tier 2 Emission & IMO certified, each with KATO 6P6-3300
Generator, Rated: 1365 EKW, 1950 KVA, 0.7 PF, 600 Volt, 3 Phase,
GT #3681H MBRadiator, Silencer MSA-1 Muffler with Spark Arrest,
(2) Sullivan Palatek Model 30DG 30HP Electric Air Compressors, radiators,
horizontal receiver tanks and (1) LEROI Model 770 cold start compressor,
diesel powered
SCR House :
ROSS HILL, Model 1650, S/N: 5244 with (4) bays, 1800 AMP Capacity, 750
Volts DC, with AC Buss, including (1) General Electric 770 Line Motor Control Center,
Model 434X162003, 480 Volts, 3 Phase, 60 HZ., mounted in a
10’H x 10’W x 30’L Temperature Controlled House.
Fuel Tank :
(1) 330 bbl. 8’ Dia. Fuel Tank with (2) 1-1/2”, 3 HP Fuel Transfer Pumps; and
(1) 300 BBL Fuel Tank
Water Tanks :
(1) 570 bbl Open Top Tank and (1) 150 bbl. with 11’ Skid Extension with
(2) 4 x 3 30 HP Centrifugal Pumps
Shale Tank :
600 bbl. Flat Bottom Tank, Internal Plumbing, Mud Jets, (2) 10 HP Agitators,
Covered Porch with (2) 6 x 5, 60 HP Centrifugal Pumps
Mud Trip Tank :
150 bbl. Flat Bottom Trip Tank with 7’L Porch and (2) 4 x 3, 30 HP
Centrifugal Pumps
Intermediate Tank :
500 bbl. Flat Bottom Tank, (3) Compartment Tank, Internal
Plumbing, Mud Jets with (3) 10 HP Mud Agitators
Suction Tank :
425 bbl. Flat Bottom, (1) Compartment Tank, Internal Plumbing, Mud Jets,
(3) 10 HP Mud Agitators with Covered Porch with (2) 6 x 5, 60 HP Centrifugal Pumps
Desilter / Desander / Shaker :
DG-ATM NOV Atmospheric Degasser with 10 HP
Pump, Brandt Desilter with (16) 4” Cones, Brandt Desander with (2) 12” Cones,
and (2) Brandt COBRA Shale Shakers
Blow Out Prevetion Equipment :
Closing Unit: Cameron, Six (6) Station, 120 Gallon Capacity
Annular Preventer :
HYDRIL Type GK - 13-5/8” X 5,000 psi
RAM Preventer :
Cameron Type U, 13-5/8” x 10,000 psi Double Ram Preventer
Cameron Type U, 13-5/8” x 10,000 psi Single Ram Preventer
Drilling Spool, 13-5/8” with 4-1/16” Hydraulic Gate Valve, 2-1/16” and
4-1/16” Outlets, (2) 21/16” Gate Valves, and (1) 4-1/16” Gate Valve.
Choke Manifold :
10,000 PSI with (8) 4-1/16” X 10,000 PSI Gate Valves mounted on an
adjustable height skid
Auxiliary Equipment : (18) 8” Slick Drill Collars
- (25) 6-3/4” O.D. x 2-1/4” I.D Slick Drill Collars
- 500 Joints, 5” 19.50#, S-135 Drill Pipe with Hard Band
- Compressor House with grasshopper
- Mud House
- Tool House
- Change House
- Parts House
- Junk Box
- (2) Ingersoll-Rand Model K6U Air Hoists
- Inter-American Model Surveyor with 15,000’ Wire Line
- 5-1/4” Hex X 42’L Kelly
- Kelly Drive Bushing
- Kelly Spinner
- Upper Kelly Valve
- Lower Kelly Valve, 5,000 psi
- National Model D Dead Line Anchor
- Pipe Spinner
- Steel Framed Rig Mats
- Electrical Suitcases
- Rig Manager Quarter
- 12 Person Crew Quarter
| |
| |
|
Id: WR706
 Drillmec MR-8000 Semitrailer Rig for Sale
Worldrigs ID: WR706
General Rig Data
Rig Data
Year of Construction : 2008
Year of recertification : July 2016 (for one year certification)
Static hook load :200mt
Setback capacity : 113mt
Mast Data
Make : Drillmec
Type : Four legs, open face, two-section telescopic
Clear height from ground level : 36 meter
Clear height from drilling floor : 31 meter
Substructure
Drill floor height : 5.2 meter
Clear height under rotary beam : 4.2 meter
Drilling floor dimensions (meter x meter) : 7 x 5
Drawworks
Make : Drillmec
Type : Conventional
Rated input power (HP) : 1.080
Main drum make : Drillmec
Main drum size (inch x inch) : 26" x 42 1/2"
Main drum static capacity : 24 mt
Main drum clutch : 42 VC 650
Main drum grooved for line OD (inch) : 1 1/8"
Make-up cathead (make) : Drillmech
Break-out cathead (make) : Drillmech
Drill line : 1 1/8" 6 x 19 IWRC EIPS
Brake type : Brake Band
Hydromatic Auxiliary brake make/model : Parmac / V80
Hydromatic Auxiliary brake capacity : 5.000 hp
Hydromatic Auxiliary brake max. pressure : 15 psi
Hydromatic Auxiliary brake max. speed : 1.550 rpm
Hydromatic Auxiliary brake clutch : 26CB 525
Cooling fluid : Water
Crown-O-Matic device : Yes Drillmec
Compound
Air System make : Drillmech
Air compressor engine : Ingersoll Rand T30 mod 2475
Air compressor max. working pressure : 11 bar
Air compressor max. HP in max. WP : 7.1 hp
Air tank capacity : 500 lt
Hydraulic system make : Drillmech
Power Pack
Diesel Engine make/model : Caterpillar / C15 - ACERT
Diesel Engine hoisting power : 540 hp
Diesel Engine quantity : 2 ea
Diesel Engine rate : 2.100 rpm
Automatic gear box quantity : 2 ea
Torque converter : TC680
Hoisting speed : 5 + 1 reverse
Rotary Drive and Rotary Table
Make : Drillmec
Rotary table opening : 271/2"
Max static load on table : 320 mt
Rotary air brake : 16 CB 500
Rotary clutch : 20 CB 500
Hydraulic Winch
Max. Load pull on drilling floor : 3.000 kg
Max. load pull on semi trailer : 5.000 kg
Drilling Equipment
Travelling block - Hook make : American block or equivalent
Travelling block - Hook Working load capacity : 226 mt
Swivel make/model : King Oil Tools/ 6SX or equivalent
Swivel static capacity : 200 mt
Swivel rotating capacity (at 100 rpm) : 122 mt
Swivel working pressure : 345 bar
Hydraulic elevation BOP make : Drillmec
Hydraulic elevation BOP total lifting capacity : 20 ton
Rig Instrumentation
Dead line anchor single pull capacity : 22.6 mt
Dead line anchor load sensor : E80 Tension
Mud System
Make : Drillmec
Volume of shale shaker tank : 60 m3
Volume of intermediate tank : 46 m3
Volume of suction tank : 46 m3
Volume of mixing tank : 60 m3
Water tank : 40 m3
Triplex Mud Pump
Make/Model : Drillmec / 9T1000
Quantity : 2 ea
Design : Horizontal design as per API 7K
Rated Input (HP) : 1.000
Valve Pot size : 7
Mounted on : Oilfield skid
Diesel Engine for Mud Pump
Make/Model : Caterpillar C18 Acert
Engine power : 600hp @ 1.200 rpm
Quantity : 2 ea for each mud pump
Transmission for Mud Pump
Make/Model : Drillmec/TC955 Torque converter
Pulsation Dampener
Make/Model : Hydrill K20-5000 or equivalent
Quantity : 1 ea (for each pump)
Shale Shaker Tank
1. Shale Shaker
Make/Model : Swaco/Mongoose PT
Quantity : 2 ea
Electric motor : 400V - 50Hz ex-proof
2. Mud Cleaner
Make/Model : Swaco / 2-12/6T4/Mongoose PT
Quantity : 1 ea
Electric motor : 400V - 50Hz ex-proof
3. Degasser
Make/Model : Swaco / Vacuum Degasser horizontal type
Quantity : 1 ea
Electric motor : 400V - 50Hz ex-proof
4. Mud Agitators
Make/Model : Swaco / c/w blades
Quantity : 2 ea
Electric motor : 15 KW 400V - 50Hz ex-proof
Intermediate Tank
Centrifugal Pump
Quantity : 2 ea
Used for : Solid equipment
Electric Motor : 75 kW 400V - 50Hz ex-proof
Mud Agitators
Quantity : 2 ea
Electric Motor : 15 kW 400V - 50Hz ex-proof
Suction Tank
1. Supercharging Centrifugal Pump
Quantity : 2 ea
Electric Motor : 75 kW 400V - 50Hz ex-proof
2. Mud Agitators
Quantity : 2 ea
Electric Motor : 15 kW 400V - 50Hz ex-proof
Mixing Tank
1. Mud Agitators
Quantity : 2 ea
Electric Motor : 15 kW 400V - 50Hz ex-proof
Mixing Unit
1. Centrifugal Pump
Quantity : 2 ea
Used for : Solid equipment
Electric Motor : 75 kW 400V - 50Hz ex-proof
2. Hoppers
Quantity : 2 ea
Size : 6"
Trip Tank
1. Quantity / Equipped with : 1 ea / 6 m3 w/ centrifugal pump & electric motor
Poor Boy Degasser
1. Quantity : 1 ea
(Mounted on top of the trip tank complete with inlet and outlet pipes)
Power System
Power Generator
Make/Model : Caterpillar / C15
Quantity : 2 ea
Prime Power : 400ekW-453kW
Frequency : 50 Hz
Speed : 1.500 rpm
MCC- Switch Gear Panel
Quantity : 1 ea
MCC for mud system : 400V / 50Hz
MCC for lighting system : 220V / 50Hz
Air Unit - Utility House
Electric Air Compressor
Pressure at discharge with dryer : 9.8 bar
Pressure at discharge without dryer : 10 bar
Capacity : 95lt/s
Power : 37kW-400V/50Hz
Quantity : 2 ea
Auxiliary Equipment
Water Cooling System
Water Tank Capacity : 5 m3
Water pump flow : 30 m3/h
Water pump motor : 400V/50Hz ex-proof
Quantity : 1 ea
Fuel Tank
Capacity : 60 m3 + 5 m3
Quantity : 1 set
Hydraulic Top Drive (HTD 220)
General Information
Make : Drillmec
Quantity : 1 ea
Bore : 3"
Rated circulating pressure : 5.000 psi - 35 Mpa
Hydraulic system requirement : 868 lt - 35 Mpa
Auxiliary hydraulic system : 225 lt - 55 Mpa
Circulation Swivel
Make : Drillmec
Wash Pipe ID : 3"
Max. WP : 350 bar
Quantity : 1 ea
Rotating Double Hook
Make : Drillmec
Quantity : 1 ea
IBOP Valve
Make : Drillmec
OD : 7 3/4"
ID : 3 1/6"
Working Pressure : 345 bar (5.000 psi)
Quantity : 1 ea
Connection : NC50 box & pin
Top Drive Hydraulic Power Unit
Quantity : 1 ea (Container)
Diesel Engine Quantity : 1 ea
Diesel Engine Make/Model : Caterpillar / C15
Diesel Engine power : 540 hp
Diesel Engine speed : 1.800 rpm
Diesel Engine no. of cylinder : 6 in line
Top Drive Rails
Quantity : 4 ea
Rig Floor Equipment
1. D.P. and D.C. Rotary Tongs
Quantity (no.) : 2 ea
Type : Rotary
Range size from : 3 1/2"
Range size to : 14 3/8"
2. Elevator Links
Set : 1 ea
Length, 1 set : 2 1/4" x 108"
Rated capacity : 250t
Drilling Instrumentation
Drilling Console
Weight Indicator
Mud Pump Pressure Gauges : Pressure range (0-5000 psi)
Rotary Torque Indicator
Rotary speed Tachometer : For top drive
Tong Torque Indicator
Mud Pump Stroke Indicator (Qty) : 2 ea
Others
Dog House (Drillmec made) : 1 ea
Dog House Support : 1 ea
High Pressure Ground Line : 1 ea
Monkey Board : 1 ea
Mud Tanks Walkways : 8 ea
Carrier Walkways : 12 ea
Handrails : 39 ea
Rotary Hose : 1 ea
Mud Pump Discharge Hose : 2 ea
Exhaust : 2 ea
Cable Tray : 1 ea
Suction Line : 1 ea
Stand Pipe Manifold : 1 ea
Stairs : 5 ea
Power Tong & Power Tong Support : 1 ea
BOP Lifting Device Remote Control Panel : 1 ea
Bop Skid & Bop Trolley : 1 ea
Vee Door : 1 ea
Driller Panel : 1 ea
Drilling Recorder 8 Pen : 1 ea
Rig Lightening System : 1 ea
Mud Tanks Lightening System : 1 ea
Well Control Equipment (without valid Certificate) : 1 ea
- 1 ea x 13 5/8" x 5000 psi Annular (Bag Type) BOP
- 1 ea x 13 5/8" x 5000 psi Double Ram BOP (Cameron "U" Type)
- 1 ea x 13 5/8" x 5000 psi Drilling Spool
- 1 ea x 3 1/8" x 5000 psi Armor Covered Flexible Hose
- 1 ea x 3 1/8" x 5000 psi Choke Manifold
- 1 ea x 3 1/8" x 5000 psi Closing Unit
- 1 ea x Remote Control Panel
- 1 ea x Remote Choke Control Panel
- 1 ea x 3 1/8" x 5000 psi HCR Valve
| |
| |
|
Id: WR393
 Newbuild D100 Hydraulic Drilling Rig for sale
Worldrigs ID: WR393 The rig is suitable for API standard zone for oil and gas and composed as follow:
Manufactured according to:
CEE Directive 2006/42/CE Machine Directive,
2004/108/EEC Electromagnetic Compatibility Directive
2006/95/EEC Low Voltage Directive
2005/88/CE Noise Directive
Application API 4F PSL1 Rev4/2013
API 6A PSL2 Rev.20/2010
API 7.1 Rev.1/2010
API 8C PSL1 Rev5/2012 where applicable
Ambient temperature 0° +50°C
Electrical components for hazardous zone according to ATEX IECEX Electric
Components
The rig is suitable for API standard zoned for oil and gas and composed as follow:
Semitrailer And Main Frame
With tree axles fixed, total mass without tractor 50 Tm, maximum dimensions 2550 mm wide
x 13.600 mm length x 4114 mm height. Frame manufactured with high strength low carbon
steel double T electrically welded, complete of extensible and folding gangways and
handrails, ladders to achieve drilling floor and rig deck. Pneumatic suspensions, single tyres
each axle 365/85 R 20 (164G), brake system pneumatic with independent loops with ABS,
24Vcc electric circuit. Stabilizers in front position, screw type manual, 2” pin, one spare tyre.
Main frame complete of plates for hydraulic stabilizers, and lower mast support for erection
operation and mast support for horizontal position during rig moving.
Spare wheel complete with wrench Michelin XZL 365/85 R20
N°4 Stabilizers ( n° 2 front, n° 2 rear )
Hydraulic type be positioned on main frame by plate bolted. Pull down max. 30 metric Tons,
mechanical stop in working position, controlled with a control panel positioned on rig frame.
DRILLING FLOOR
manufactured with electrically welded steel, connected to mast forming one body.
Predisposition for clamp site. Standard height drill floor 4000 mm.
Mast Lattice Type
Two pieces with top end connections, removable in transport condition, manufactured with
high strength steel pipe welded. Compete of cradle for main hydraulic cylinder for pull up and
pull down, pad eyes to erection system, top drive guide applied to mast internal side. Internal
mast is suitable to receive the h.cylinder with sheaves and lines for pull up and down system.
Maximum pull up 100 metric Tons (110 Short Tons), maximum pull down 20 metric tons (22
Short Tons), total top drive stroke 16 meters (52.5 ft.) (RANGE3, 13,500 mt. Max).
Crown Block
Frame manufactured with high strength low carbon steel electrically welded complete of
sheaves supports, with safety run pulley bars. Eight steel sheaves with groove hardened for
32 mm ropes, complete of lubricating system. The lines are sized with a safety factor against
breaking of 4 compared to an API rig with a safety factor of 2.0 when pulling on stuck pipe.
Cylinder system for allocate the Crown block for transport position.
Pull Up And Down System
Hydraulic block to action the main cylinder. Automatic driller system or pull down, manual,
adjustable with manipulator positioned on control panel.
Substructure
Composed by n.3 skid base to support 4 hydraulic stabilizers and 2 mechanical adjustable
screw type stabilizers
Drilling Floor
Manufactured with electrically welded steel, connected to the mast forming one body.
Predisposition for clamp site, complete of API clamp full passage 27.1/2” ( 700 mm ),
containing bowl for automatic slip
Bowls according to API Spec.
Clamp removable to have a passage of 40” ( 1000 mm ) on center well.
Net height 4 mt min.
BOP Trolley
Complete of rails, mounted on skid base in center well area including hydraulic cylinder group
suitable for lift BOP (blow out preventer) during casing sticking 25 ton capacity
Hydraulic Power Tong
At double body, suitable to screw and unscrew the drill pipes, and casing. Manufactured with
carbon steel welded and working finished to achieve the drill pipe from 2.7/8” to 13 3/8”.
Centralizer for drill pipe, positioned on power tong bottom side. The power tong is connected
to drill floor with bolts.
Maximum make up 11,500 daNm
break out torque 16,000 daNm.
Vertical stroke 30” (750 mm)
Automatic Slip
Hydraulic controlled mounted on rig floor complete of 3.1/2” DP slips, 5.1/2” – 12.3/4” CSG
Slip and 6.1/2” D.C. Slips.
Top Drive
Hydraulically powered, manufactured in carbon steel electrically welded, powered by 3
hydraulic motors, complete with shock absorber on main shaft. Gooseneck and wash pipe 3”
ID, complete with fitting for wireline entry on top of Gooseneck. The wireline entry top should
have a WECO 3” FIG. 1502 connection with a minimum drift ID= 76,2 mm. Hammer union for
Rotary hose. Main shaft sliding type, pin 6 5/8 API Reg. lower connection, full passage 3”,
complete with saver sub.Tilting system suitable to add and unload the drill pipes from drilling
sling. Support device included IBOP Kelly Valve. Complete with semi-automatic lubricator.
Maximum Torque 3450 Kgm at 50 RPM.
Maximum Torque 960 Kgm at 180 RPM.
RPM from 0 to 180
Stroke 16 meters.
Maximum speed: up low 0,6 m/sec.
high 1,2 m/sec.
down 1,2 m/sec.
Pull up 100 metric ton.
Pull down 20 metric ton.
Top Drive Dolly
Manufactured with carbon steel welded, suitable to support and guide the top drive, complete
of rack for flexible hoses and rotary hose. Tilting mechanism hydraulically powered to
position the drill pipes on rack or vice versa to feed the drilling string
Service Jib Crane
Positioned on mast, rotation with hydraulic cylinder. Hook Maximum load capacity 4T. Hook
Running speed up and down 0,6 m/s. Rope O.D. 14”. The crane is complete of 50 meters of
wire rope 14mm diameter and hook with swivel 4 metric tons capacity Crosby or equivalent
model. The service jib crane is controlled by the main panel.
Hydraulic Power Unit
Mounted on rig deck composed of : Diesel engine industrial type, Caterpillar C18 model or
equivalent , 630 HP at 1800 RPM, EPA certified, 6 cylinders in line turbocharged/aftercooled,
flame proof electrical auxiliaries, antistatic and fire resistant belts, quick closing valve with
automatic speed shut down and remote control, with special water heat exchanger for hot
temperature (55°C environment), complete of pneumatic starter, rpm counter, hours counter,
high water temperature control, lower oil pressure control, emergency stop, muffler with
sparks arrestor. Electric system Eexd. Gear coupler directly connected to engine for hydraulic
piston and gear pumps driving type Twin Disc Tecnodrive, complete of heat exchanger type
air-oil hydraulically powered. Piston hydraulic pumps Parker trade mark, mounted directly on
gear coupler.
Skid base in carbon steel suitable to support the power unit. N° 1 Fire extinguisher removable
type, placed near the engine hood.
Sound Proof Hood
Mounted on rig deck, complete of panels for noise absorbing, filters for engine air aspiration,
muffler support. The hood is complete of opening doors for maintenance operations.
Foam Injection Pump Cat
3535 Model, Displacement 37 GPM (136 lt/min) at 1200 PSI, 85 Bar complete with hydraulic
motor piping, fitting Relief valve.
Hydraulic System
Composed of pumps and hydraulic motors, pipes and hoses, blocks, distributors, valves,
hydraulic cylinders and fitting. All components mounted and connected to any user. Oil tank
capacity 2600 litres approx, complete of suction pipes and oil filter on return. Optical oil level,
thermometer for oil temperature control. Each suction pipes is connected to a ball valve. Heat
exchanger type air-oil Emmegì model.
Double Stand Pipe
4” ID 5000 PSI WP positioned with clamp in the floor of semitrailer complete of junctions,
hammer unions 4” fig.602, lock brackets.
Mud Manifold
5000 PSI H type composed by steel piping without thread, n° 3 valve 4”, n°3 valve 2”, n° 1
choke valve 2”, n° 1 Remote pressure gauge, pressure gauge 0-6000 PSI WP.Rotary Hose
API Grade D 3 1/2” ID x LG 36’ complete with 4” FIG. 602 Hammer Union. 3” Ball valve
complete with attuator and remote control
Pneumatic System
Complete of drier air, filter, lubricator, pipes, valves and air tank 500 litres capacity.
Dog House
Dog House with 2.5 x 2.60 x 3.46 mt with twist block, two doors, with control panel and quick
connection for easy dismounting for transport.
Control panel is located into the Dog House and completed of:
- Pressure Hydraulic service indicator;
- Pull up indicator (Adjustable);
- Pull down indicator (Adjustable);
- Top Drive torque indicator (Adjustable);
- Top Drive RPM indicator;
- Mud Pressure indicator;
- Power tong torque indicator (Adjustable);
- Power tong closure force indicator (Adjustable);
Control levels and manipulators, starter panel for engine with instrumentation, emergency
stop and remote stop emergency.
Lighting system and closure in front of protection.
Side Control Panel
Positioned near rear stabiliser, left side, complete of:
- control level for stabiliser
- control level for mast lifting
- control level for crown block rotating
- emergency stop
Electric System
EExd composed of n°12 lamps of 230V 23W fluorescent type positioned on mast front toward
the center well, n° 2 lamps 230V 2x36W with emergency of on rear toward rig deck, n.2
lamps positioned in the substructure as per 27/28-10.08 report, n° 2 lamps on drilling floor
2x18W with emergency positioned under engine hood 230V.
Suitable for 55°C.
Tubular Loader (Pipe Handling)
Suitable to load drilling pipes, drill collar and casing from the horizontally positioned pipes
rack to the vertical position, to add them at the top drive and vice versa. Hydraulically
powered by the driller by means of the control panel. Composed by a tubular arm with pliers
for pipes lifting on diameter from 2 3/8” to 13 3/8” (60 – 340 mm) for a maximum weight of
3000kg and a length range 3 and range 2 (patent pending)
.
Num 01 Elevator semiautomatic, type overshot, suitable to catch DP from 2”7/8, 3.1/2”,
4.1/2” and 5”.
The elevator is mounted under top drive by two pins and connected with two hydraulic
cylinders that control the open and close liners device. Interchangeable reductions and liners
are available to catch the above described sizes casing and drill pipes.
Max load capacity 100 tons.
Num 01 Elevator semiautomatic, type overshot, suitable to catch CSG 7” – 9.5/8” –
13.3/8”.
The elevator is mounted under top drive by two pins and connected with two hydraulic
cylinders that control the open and close liners device. Interchangeable reductions and liners
are available to catch the above described sizes casing and drill pipes.
Max load capacity 100 tons.
Semi-Automatically Pipe Rack
With control panel mounted on ground floor or in the main control panel, for D.P. from 3 ½”- 5”
– D.C. 8.1/4” – CSG 7” to 13.3/8” Range 2 and Range 3.
Designed for hard work and long life working activity manufactured with low alloy carbon
steel pipes, beams, plates, all components will be electrically welded composed by n° 2
tubular rack element
Capacity of 1.800 mt of DP.
Hydraulic jacks for sloping mechanism to move the pipe on centre well and vice versa, n.04
hydraulic cylinders for levelling system, n.02 hydraulic cylinders for locking system.
Tool Box
Positioned on main frame complete of tongs and tools for standard rig maintenance.
Coating Of Drilling Rig
main component with the following cycle :
- sandblasting SA 2.1/2”;
- first hand epoxy thk 40 micron;
- second hand epoxy thk 50 micron;
- third hand polyuretanic 50 micron;
- Total paint thickness 140 micron,
paint final tonality to be decided
| |
| |
|
|
|
Id: WR565
 Cooper 750 Drilling Rig for Sale
Worldrigs ID: WR565 Description :
Drawworks :
Cooper 750 DD Drawworks, 750hp, Grooved for 1 1/8" Drill Line,
Powered by (2) 425hp Detroit Diesel Series 60 Engines,
W/Allison CLT-5860 Trasmissions, Caliper Disc Brake,
Cooper (2) Engine In-Line Compound, Cooper Right Angle Gearbox,
Cooper Deadline Anchor, All Mounted On a Four Axle
Auxiliary Brake:
Kobelt Pneumatic 48"
Mast :
DSI 117' H Double Soping Mast, 410,000# Static Hook Load,
(5) Sheave Crown Cluster, Crown Safety Platform, Racking Board,
Tong Counter Weights, Ladder, Derrick Climber, Geronimo,
4" Standpipe and Manifold
Substructure :
DSI 17'8"H, Scoping T-Style Substructure, 300,000# Set Back Capacity,
Rotary Beams, Stairs, Safety Railing, Elevated Roatry Drive
Top Drive :
TESCO 250 HMIS 475 Top Drive and Power Unit, Rated 475hp, 250 ton,
(2) Speed/Torque Ranges, 21,000# Max Continous Torque
W/Max 85 RPM and 10,000# Max Continous Torque W/Max 170 RPM
Mud Pumps :
Two (2) Gardner Denver PZ-9 Triplex Pumps, 1000hp, Each
Powered by 1100hp Caterpillar D399 Diesel Engines, Forged Steel Fluid
end Modules, Quick Change Caps, K-20-5000 Pulsation Damper,
OTECO 3" Shear Relief Valve, 1 1/2" x 2" Centrifugal Rod Cooling Pump,
5" x 6" Charge Pump, 6,000 PSI Pressure Gauge, Chain Drive Assembly
Well Control :
Shaffer LWS 11" 5M Double RAM, Hydril GK 11" 5M Annular,
Choke Line (1) 4-1/16" Hose, Kill Line (1) 2 1/16" Hose,
(1) 2 1/16" GATE Valves, (2) 2 1/16" Hose,
(1) 2 1/16" Gate valve, (1) Check Valve
Choke Manifold :
Cameron Type 5M, W/5-Way Cross, (2) 4 1/16" X 5M Gate Valves,
(8) 2 1/16" X 5M Gate Valves, (8) 2 1/16" X 5M Gate Valves,
(2) 2 1/16" 5,000 PSI Pressure Guage, DSI 3' X 10' Degasser,
Mounted on 8'W x 16'L Skid
Accumulator :
Koomey Type 80 (5) Five-Sation Closing Unit, With (16) 11 Gallon Accumulator Bottles,
(1) Triplex Pump, (2) Air Pumps With 120:1 Ratio
Mud System :
Two (2) Tank Mud System of Approximately 800 BBL Total Capacity
Shaker Tank of Approximately 400 BBLS, (2) Vortex Fluid Systems
Orbital Shale Shakers, Odrill Desender W/(2) 10" Cones,
Odrill Desilter W/(12) 4" Cones, (2) 6' x 5" Series 250 Centrifugal
Pumps Powered By A 60 hp AC Electric Motor
Suction Tank of Approximately 400 BBls W/(2) 6" x 8" Series 250
Centrifugal Pumps Powered By A 60 hp AC Electric Motor, (4) 15hp
Mud Agitators, Vortex Ventures Shearing Hopper, Vortes Radial Eductors
in Mud Tanks
Trip Tank :
28 BBLS W/2" x 3" Centrifugal Pump
Power Catwalk : Rahco Hydraulic, Handles Double Joints of
Drill Pipe and Range 3 Casing
Generation/Utility House :
Two (2) Caterpillar 350 KW AC Generators, Powered By 475HP
CAT C-15 Diesel Engines W/Electric Start, Air Compressors and MCC Panel
Block/Hook :
American Block, 250 Ton Block/Hook Combination, With (5) 36" Sheaves for 1 1/8" line
Rotary Table :
IDECO 17-1/2"
Water Tank :
400 BBL. Complete W/(2) MCM 2" x 3" Centrifugal Pump Driven BY 20hp AC Electric Motors
Fuel Tank :
10,000 Gallon W/(2) Roper 3 HP Fuel Tranfer Pumps
Drillers Doghouse :
Drillers Doghouse 25' x 8'2" x 9'3"
Auxilliary Equipment :
Two (2) PC12 Hydraulic Winches, (1) IR FA2.5 Man Rider Air Hoist,
Spinnmaster 950 Hydraulic Drill Pipe
Instrumentation :
Weight Indicator, W/Tong Line Pull, Pump Pressure & Rotary Torque Gauges,
Type "D" 5,000 PSI Mud Pressure Gauge
Wireline Machine :
Five Star Retriever W/15,000' OF .092 Wireline
Well Site Trailers :
TA Structures Rig Manager Trailer 54' x 12'6" x 11'8", Crew Bunk/Change House
Tubulars :
Drill Pipe and Collars Per Contract Requirements
| |
| |
|
Id: WR812
 Carrier Mounted Corsair 550HP Rig for Sale
Worldrigs ID: WR812
General Description
Estimated Drilling Depth : 7,200 ft
Estimated Rig Move Loads : 44
Estimated Camp Move Loads : 35
Rated HP : 550
Mast
Height : 107.00 ft
Static Hook Load Capacity : 297,000 lbs
Mast Racking Capacity : 6,560 ft
Substructure
Style : Monobloc
Height : 12.92 ft
Clear Height : 10.36 ft
Casing Capacity : 297,000 lbs
Maximum Setback Load (lbs) : 198,000
Drawworks
Make : Corsair
Model : W5384E
Power Rating : 550hp
Input Power : 1 ea Caterpillar D3408
Drilling Line Size : 1"
Auxillary Brake : Parmac Inc D631974-X
Top Drive / Power Swivel
No Top Drive
Swivel
Make : Oilwell
Model : PC-150
Capacity : 150 Ton
Rotary Table
Make : Gardner Denver 17.5
Table Opening : 17 ½"
Maximum Load Rating : 150 Ton
Power Generation
Mechanical Rig
Enchancements
Power Slip Frame : Upetrom
Mud System
Mud Pumps : 2 ea Upetrom 3PN-1000
Power Rating : 1,000 hp @ 150 spm
Pressure Rating : 5,000 psi
Active Mud Volume : 1,060 bbls
Reserve Mud Volume : 117 bbls
Shale Shakers : 1 ea MI Swaco Mongoose
Mud Cleaner : N/A
Desander : N/A
Desilter : N/A
Centrifuge : N/A
Well Control
Annular : 13 5/8" 3,000 psi, Upetrom
Double Ram Preventer :
13 5/8" 3,000 psi, Upetrom,
9" 3,000 psi, Upetrom
BOP closing Unit : Upetrom
| |
| |
|
Id: WR633
 850HP Super Single Drilling Rig for Sale
Worldrigs ID: WR633
General Description
Estimated Drilling Depth : 10,000 ft
Estimated Rig Move Loads : 22
Estimated Camp Move Loads : 4
Rated HP : 850
Mast
Height : 80.00 ft
Static Hook Load Capacity: 300,000 lbs
Mast Racking Capacity : N/A
Substructure
Style : Parallelogram
Height : 15.00 ft
Clear Height : 13.00 ft
Casing Capacity : 300,000 lbs
Maximum Setback Load (lbs.) : 300,000
No Drawworks
Top Drive / Power Swivel
Make : Tesco
Model : 250 HMI 475
Capacity : 250 Ton
Torque - Continuous : 21,000 ft-lb @ 56 rpm
No Swivel
No Rotary Table
Power Generation
Engines : 2 ea. Detroit Diesel Series 6063HV35
Generators : 2 ea. Stamford Power System HCI534DIL-0080E
SCR / VFD / DC/DC : Rack & Pinion Rig
Enhancements
Forklift : Caterpillar 930H
Iron Roughneck : Canrig Drilling Technology TM80-110-12-X-WX/PCS
Mud System
Mud Pumps : 2 ea Hong Hua HHF-1000
Power Rating : 1000 hp @ 140 spm
Reserve Mud Volume : 0 bbls
Pressure Rating : 5,000 psi
Active Mud Volume : 700 bbls
Shale Shakers : 2 ea. Derrick Corporation FLC 504
Desander : American Craftman 10" x 3 cones
Desilter : American Craftman 4" x 16 cones
Mud Cleaner : N/A
Centrifuge : N/A
Well Control
Choke Manifold : Quality Valve & Machine Works Inc., 3 1/8" 5,000 psi
BOP Closing Unit : Burnsco, 6 Station 3,000 psi
| |
| |
|
|
|
Id: WR1058
 Ingersoll-Rand TH60 Long Tower Drilling Rig - For Sale
Worldrigs ID: WR1058
Description :
1979 Ingersoll-Rand TH60 Long Tower Drill Rig
Mounted on a 1979 International Paystar 5000 truck
1,408 Hours on Engine and Compressor (Since Rebuilt)
Power by a Detroit 8V92T Diesel Engine
IR 750 cfm / 350 psi Air Compressor
2-cylinder Bean Water Injection Pump
7-Rod Carousel with (20ft x 4-1/2") & 20 Rods Included
6" Hammer & Stabilizer & Basic Tooling Included
Gearmatic winch & Sand Line
3-Leveling Jacks
Note : "Divertor NOT Included" &
Several Rear Tires Need Replaced
Location : USA
| |
| |
|
Id: 9000-421
 Superior 1000M Drilling Rig for sale
Worldrigs ID: WR421 Drawworks:
SUPERIOR 1000M New (2006) Single Drum Drawworks, 1,000 Hp
Lebus grooved for 1-1/4” Drilling Line, Air operated Makeup
& Breakout Catheads, Over-Running Clutch, Air
Driller’s Console, Crown-O-Matic, Right Angle drive for rotary table.
Compound:
2-Engine, In-Line Compound, w/ Right Angle Drive RT
Box For rotary & Draw works drive.
Brake:
PARMAC Dual V-80 Hydromatic Brake coupled together
Drawwworks Power:
No. 1 – CATERPILLAR C-18 Diesel Engine S/N# WJH01728,
600 Hp Rated, w/24 Volt Electric Start, Radiator, Gauges,
OILWORKS C-195-100 Torque Converter S/N3444
Air clutch
Hours# 21,597
No. 2 – CATERPILLAR C-18 Diesel Engine S/N# WJH01706,
600 Hp Rated, w/24 Volt Electric Start, Radiator, Gauges,
OILWORKS C-195-100 Torque Converter S/N1616
Air clutch
Hours# 21,664
Mast:
DRILLMASTER New 2008 SN#07632 20’1 1”W x 136’H Cantilever Mast,
With a Gross Nominal Capacity of 930,000 Lbs. and a
650,000 Lb. Static Hook Load, Max wind 91 Knots,
with ten (10) lines. Crown Block w/ (5)42” Sheave Cluster &
1-56”Fast line Sheave grooved for 1-1/4” diameter drilling line.
Each Crown Sheave wire rope groove is flame hardened.
Each Crown Sheave is fitted with Timken roller bearings and grease seals.
Derrick complete with Crown Safety Platform, 20 finger Racking Board W/ electric mule,
Bridal Lines, Tong Counter Weights, Survey Line Sheaves,
Tugger Sheaves, Ladder, Derrick Climber, Geronimo line,
4” Standpipe & Manifold and
Derrick Stand.
Last Certification 8/23/2012
Substructure:
DRILLMASTER New (2009) 29’10”W x 20’H x 48’8”L
(4) Box-On-Box Substructure w/ Rotary Beams, V-Door Ramp,
Stairs, (2) Air Receiver Tanks, NATIONAL Deadline Anchor,
Safety Rails, inside Catwalk Trolley, 7’W x 14’L built in Tool
Room (ODS) (3) Stairs, Outside wall Winterized, Jacking door,
12’ X 12’ Setback spreader, internal stairway, Vapor proof lighting,
Skidded with oilfield tail rolls
Pump: (Primary)
HT F-1000 Triplex Mud Pump New 2006,
S/N HT 20060088, 1,000Hp.
w/ LANZOU Pulsation Dampener S/N HT20060070,
MF 5,000 Psi. Pressure Gauge
FIVE STAR 6”x8”x14” Charging Pump S/N5268 p/b TECO 75 Hp. Electric Motor,
Chinese 3”Shear Relief Value, Master Skidded w/ (2) Engines belt compound
Pump Power
CATERPILLAR C-18 Diesel Engine S/N WJHO1283,
575 HP w/24 Volt Electric Start, Radiator, Gauges,
V-Belt Drive EATON 18CB500 Air Flex Clutch,
Mounted Pump Master Skid.
Hours # 17,376
CATERPILLAR C-18 Diesel Engine S/N WJH01322,
575 HP w/ 24 Volt Electric Start, Radiator, Gauges,
V-Belt Drive EATON18CB500 Air Flex Clutch,
Mounted Pump Master Skid
Hours#16,277
Pump (Secondary):
HT F-1 000 Triplex Mud Pump New 2006,
S/N HT 20060070, 1,000 Hp.
w/ LANZHOU Pulsation Dampener S/N HT20060069,
MF 5,000 Psi. Pressure Gauge
FIVE STAR 6” x 8” x14” Charging Pump S/N5268 p/b WORLDWIDE 75 Hp. Electric motor,
3” Shear Relief Valve, Master Skidded w/ (2) Engine belt compound
Pump Power:
CATERPILLAR C-18 Diesel Engine S/N WJH-00457,
575 HP w/ 24 volt Electric Start, Radiator, Gauges,
V-Belt Drive, EATON 18CB500 Air Flex Clutch,
Mounted pump Master Skid.
Hours#13,788
CATERPILLAR C1-8 Diesel Engine S/N WJH-00373,
575 HP w/ 24 Volt Electric Start, Radiator, Gauges,
V-Belt Drive, EATON 18CB500 Air Flex Clutch,
Mounted Pump Master Skid.
Hours#16,643
Rotating Equipment:
ROTARY TABLE
Chinese ZP 27-1/2”, New 2006, complies with API split master bushings,
W/ drive shaft coupling.
Swivel:
Ideco 300
Kelly:
5-1/4” x 42’ Hex Kelly W/ HDS Kelly Drive Bushing
Kelly Spinner:
OWI 1500 Kelly Spinner S/N 00475B w/ (2) Air Motors, New
Kelly Valves:
Upper Kelly Valve.
Lower Kelly Valve
Traveling Equipment:
Sentry Rig Equipment Company
260 Ton Capacity New 2006
4G260 Traveling Block w/ (5) 36” Sheaves, 1-1/4” Line,
Unitized “Hydra-Hook” 260 Ton Capacity
Blowout Preventer & Valves:
1 EACH -13-5/8" X 5000# Jiangsu Xianz hong Petroleum
Double Gate BOP, Top & Bottom Stud configuration
Including - 1set of 5" Pipe Rams Blocks & 1set of Blind Rams,
With 2 - 4" outlets on each side of Body of BOP
1 EACH - 13-5/8" Jiangsu Xianz hong Petroleum ANNULAR BOP
Includes rubber element
1 EACH - 13 5/8" X 5000# Type D DRILLING SPOOL W/ - 2" SIDE OUTLET & 3" SIDE OUTLET
[MATCHED TO CHOKE MANIFOLD
1 EACH - CHOKE MANIFOLD - 3" X 5000# COMPLETE
INC - STEEL FLEX LINE W/ FLANGES TO CONNECT
TO BOPS OR DRILLING SPOOLS
Closing Unit:
2008 Jiangsu Xianz hong Petroleum Model FXQ640-6
Closing Unit Accumulator, 6 Station,
Rig Floor Controls and monitor panel,
Complete W/ 15 Bottles, 30 HP Cat 3517 Charge Pump, 21 Air Pumps, & set up for Nitrogen Bottle Backup
Suitcase Closing Unit Skid 7’-1 0” x 35’ with junk basket
Choke Manifold & Valves:
Jiangsu Xianz hong Petroleum Choke Manifold w/ (1) 5-Way Cross, (3) 4-1/16”x 5M
Gate Valves, (4) 2-9/16” x 5M Gate Valves, (1) Manual
Adjustable Chokes, Hydraulic Adjustable Chokes, Mounted Oil Field Skid.
W/ 2 Kill Valves- & 2-Choke Valves mounted at drilling spool
Rig Houses:
Dog House, DRILLMASTER 9’ 1 1”W x 39’ 1 1”L
Doghouse / Change house Combination w/ 17’5”L
Driller’s House w/ Knowledge Box (5) Lockers, Bench Storage, Heater, Lights.
5’L Breezeway, 1 7’5”L Change House, w/Bench Storage, (16-Lockers,
Cabinets, Heater & Lights. Oil Field Skidded.
Generator/Utility Houses:
DRILLMASTER 1 1’10”W x 37’9”L x 11’ 6” T
Utility House w/Lights, Oil Field Skidded to include the following items.
No #1 380 Kw. AC CATERPILLAR Generator Package Powered by Caterpillar C-15 Diesel Engine S/N JRE01986 w/ 24 Volt Electric Start, Radiator, HD Air cleaner Gauges. Marathon 572RSL4025 Generator End SN# 550989-0506, complete with Oil Field skid.
Hours# 17,278
No #2 380 Kw. AC CATERPILLAR Generator Package Powered by Caterpillar C-15 Diesel Engine S/N JRE01985 w/ 24 Volt Electric Start, Radiator, HD Air cleaner Gauges. Marathon 572RSL4025 Generator End SN# 550989-0507, complete with Oil Field skid.
Hours# 16,933
NO. 1 GARDNER-DENVER EBE99N New 2006
Electro Saver II Rotary Screw Air Compressor S/N# S237421,
P/b TOSHIBA 30 Hp. Electric Motor, Mounted 240 Gallon Horizontal Tank.
Hours# 15,128
NO. 2 GARDNER-DENVER EBE99N New 2006
Electro Saver II Rotary Screw Air Compressor S/N# S237419,
P/b TOSHIBA 30 Hp. Electric Motor, Mounted 240 Gallon Horizontal Tank.
Hours# 14,400
SIEMENS Interlock Panel, 600 Amp 480 Volt Main Lockout Disconnects breakers.
ALLEN BRADLEY Electrical Load center with magnetic starter & breakers,
SQUARE D 225 amp 240 volt panel with breakers
SQUARE D 75KVA Transformer 480 volt to 240 volt
DRILLMASTER 7’9”W x 13”H x 43’1”L Electrical
Suitcase.
DRILLMASTER 2’5”W x 1 3”H x 36’3”L Electrical
Suitcases.
Mud System:
DRILLMASTER 9’6”W x 7’H x 34’5”L, 394 Bbl. Suction Tank
10’L Covered Porch, (3) Compartments,
(3) MAX 2000 Mud Agitators p/b TECO 25 Hp. Electric Motors,
Sloped Bottom, Top Mounted Walkways, Safety Rails, Lights, Oil Field Skidded.
FIVE STAR 6”x8”x14” Centrifugal Mixing Pump S/N 5284, p/b BALDOR 75 Hp. Electric Motor.
FIVE STAR 6”x8”x14” Centrifugal Mixing Pump S/N 5284, p/b BALDOR 75 Hp. Electric Motor.
With internal jetting system, 3 dump gates,
DRILLMASTER 9’6”W x 7’H x 34’7”L, 394 Bbl. Shaker Tank
10’L Covered Porch, (3) Compartments
MAX 2000 Mud Agitator Agitators p/b TECO 25 Hp. Electric Motors,
Sloped Bottom, Top Mounted Walkways, Safety Rails, Lights, Skidded.
With internal jetting system, 3 dump gates,
FIVE STAR 6”x8”x14” Centrifugal Mixing Pump S/N 5269,
p/b BALDOR 75 Hp. Electric Motor.
FIVE STAR 6”x8”x14” Centrifugal Mixing Pump S/N 5283,
p/b BALDOR 75 Hp. Electric Motor.
SHALE SHAKER, Fluid Systems Inc., Single Screen,
Linear Motion Shale Shaker S/N2450,
SHALE SHAKER, Fluid Systems Inc., Single Screen,
Linear Motion Shale Shaker S/N3089,
NOI DSN-ZH-10CTX Desander S/N 8714-5732,w/ (2) 10” Cones.
NOI DSL-10GG-4CTX Desilter S/N 8714-5731,w/ (10)4” Cones.
DRILCO “Deep Pit” Degasser p/b TECO 10 Hp. Electric Motor
Bubble Buster: Geothermal Type Bubble Buster
Mud House:
DRILLMASTER 9’ 1 1”W x 26’L Mud House w/Mud Hopper, Test Sink, Ventilation Fan, Electric Heater,
Lights, Double Side Door, (2) End Doors, Skidded. Includes 7’H Tri-Stand on one end the other end sets on suction tank.
Fuel Tank:
DRILLMASTER 7’1 1”Wx8’Hx30’L, 13,860 Gallon Fuel Tank
w/ (2) AMT 1/2 Hp. Fuel Transfer Pumps p/b BALDOR 1/2 Hp. Electric Motors,
with Three (3)Compartment, Combo Lubester Oilfield Skidded.
Water Tank:
DRILLMASTER 10’10”W x 8’1”H x 35’L, 529 Bbl. Water Tank
w/ 10’L Covered Extension, Pump Room, OilField Skidded
FIVE STAR 3”x4”x1 1” Centrifugal Water Pump
S/N 5420, p/b TECO 20 Hp. Electric Motor.
FIVE STAR 3”x4”x1 1” Centrifugal Water Pump
S/N5267, p/b TECO 20 Hp. Electric Motor.
Instrumentation:
Weight Indicator
Mud Gauges.
Ancillary Equipment:
DRILLMASTER 5’W x 2’4”H x 60’L, 2-Section Catwalk w/ Steel Deck and stands for string blocks.
Pipe Racks 5 Sets 29” x 30’ 1 set 29” x 12’ 1 set 41” x 30’
FIVE STAR “Retriever” Electric Measuring Device S/N 862, w/ 15,000 Ft. of. 092 Wire line
2 sets drill pipe elevators 5”
2 sets of drill pipe slips 5”
2 sets of drill collar slips 7” & 9”
2 sets tongs with all head for pipe & casing
2 sets of safety clamps
Mud box with 5” rubbers
108” X 4” elevator bails
Crossover, bottom hole, lifting Subs
Air Hoist Air Wrench, Model HUL40, S/N-REM10370, 9000 lb. Pull Rating
Air Hoist Air Wrench, Model KSUL, S/N-REM13962, 10,500 lb. Pull Rating
4,000 Ft. of 1-1/4” Drill Line, Mounted Spooler Stand
3-1/2” X 5,000 Psi. Rotary Hose
Vibrator Hose 2 Each 3 ½” x 18’
Rat hole
Mouse hole
8 rig matting boards
Small hand tools & wrenches
Fluorescent & Mercury-Vapor Rig Lights & Wiring Explosion proof
Atco Office/ living shack all electric w/ oil field skid
| |
| |
|
Id: WR974
 Taylor RT 5000M Trailer Mounted Drilling Rig - For Sale
Worldrigs ID: WR974
Description :
2007 Taylor RT 5000M Trailer Mounted Drill Rig
Complete RC Reverse Circulation Drilling Package
DSM 18” Table
3000ft Sandline Winch
Cat C15 Diesel Engine - rated 475 hp (low hours)
Cat TH-35 AutomaticTransmission
Hercules Dolly/Jeep tandem axial
Mud Tanks (2)
Western Rubber 6WC swivel and RC Kelly
40 ft trailer equipped with "doghouse" and 25 KVA generator
Jacks for drilling rig (qty. 2)
Drill pipe 7" x 30" x 6-5/8” Drilcox 51⁄2”ID (qty. 38)
Drill collars 9”od x 5-1⁄2” ID x 30ft x 6-5/8” Drilco MxF (qty. 7)
Drill collar extensions 9" W x 68" L (qty. 2)
Low Hours
Very Good to Excellent Condition per seller
Sub for bits 9" W x 36" L (double female)
Sub for bits 9" W x 26" L (double female)
Misc Sub lift for drill collars (qty. 4)
Slips for drill collar
Slips for drill pipe - Drill tongs (qty. 2)
Splitter box - Power tongs
8" Kelley hose 38 ft - Clipper weight scale
Price Reduced in February 2023
21,658.3 Hours on the digital gauge
Location : USA
| |
| |
|
|
|
Id: 9000-441
 Oilwell E2000 Drilling Rig for sale
Worldrigs ID: WR515 Drawworks
Oilwell E2000, low low rated 711,000#, single line pull, w/10 lines,
driven by (2) GE 752 DC motors, Wichita 336 air operated/water
cooled disc brake, 1 3/8” wire rope 6x19 IWRC.
Prime Power
Omron/SCR System, 3 generator bays, 4 SCR bays, (3) Caterpillar
3512B w/Kato 1365 KW gen sets.
Auxiliary
Cold start air system, primary rig air supply, floor hoisting systems
Mast/Substructure
DSI 142’ 1,000,000# hook load, slingshot design 27’ RBC, 24.1’ RKB,
600,000# set back, Crown Block 6-60” Sheaves 1 3/8” groove, Fastline
1-60” 1 3/8” groove, hydraulic jack skidding system.
Top Drive – Traveling Block – Pipe Handling
Varco TDS11SA VF AC 500 Ton, Continental Emsco 500 Ton Block,
SJ Petro 27 ½” rotary table, drawworks driven
Mud Pumps
(2) Weatherford MP-16, 1600HP Triplex, 5000#psi driven
by (2) each, GE 752 DC motors.
Mud System
(3) tank system, 1200 bbl active capacity with 150 bbl TT,
tandem WFSI linear shale shakers, (8) NOV Max 2000 10HP mud agitators,
derrick desander (2) 12” cones with 6x8 centrifugal driven by 100 hp motor,
Derrick (12) 4” cones with 6x8 centrifugal driven by 100 hp motor, Derrick
Vaccu flow 1200 degasser and 48 x 20 gas buster.
BOP Equipment
13 5/8” 5000# annular, 13 5/8” 5000# double ram, Church
energy 3000 psi accumulator, 180 gal, 6 station with remote, 4 1/16” 10M x
3 1/16” 10M choke manifold.
Fuel tank
18000 gal
Water tank: 500 bbl
Auxiliary Equipment
Deadline Anchor, Weight indicator, pump SPM and PSI,
top drive control house, SCR system controls and MU/BO torque, manual tongs,
elevators, slips and clamps.
| |
| |
|
Id: WR1034
 Continental EMSCO Drilling Rig - For Sale
Worldrigs ID: WR1034
Description :
Drawworks
Manufacturer : Continental EMSCO
Model : C-1
Power : 1500-HP
Motors : (2) GM, 800-HP DC Traction Motors
Brake : Wichita Brake Auxiliary Brake
Control System : Varco Drilling System Interface
Serial Number : N/A (Asset DW014)
Hours : 9785
Note : Transmission shaft and splines removed for Draco
Generator Sets
3 X Generators - Catipillar 3512b
SCR House
Configuration: 3x4
Mast
Manufacturer : National Oilwell
Type : 136ft Telescoping Mast
Capacity : 750,000-LB Hook Load
Features :
Accommodates 350-Ton Top Drive
Geronimo Line
IDM Crown
Hydraulic Lift Cylinders
Mast Dolly
Substructure
Manufacturer : IDM
Type : 22ft Hydraulically Telescoping Substructure
Capacity :
750,000-LB Rotary Load
400,000-LB Simultaneous Setback
Features : Integrated Drainage System, (2) Braden Floor Winches
Rotary
Manufacturer : EMSCO
Model : Type 371⁄2"
Drive : Independently driven by (1) 800-HP DC Traction Motor
Blowout Preventer (BOP)
Configuration :
(1) 13-5/8" 10,000-LB Double Ram BOP
(1) 13-5/8" 10,000-LB Single Ram
(1) 13-5/8" 5,000-LB Annular
Type : Shaffer
Compliance : Meets API 16D
(1) 6 Station Accumulator, Beijing Petroleum, Model FXQ720-6, API 16E
Flexible Choke Line : 10,000-LB
Choke Manifold : 4ft x 4’’ 10,000-LB
Mud Pumps
2X Mud Pumps - FB1600 Continentail EMSCO
Mud System
Total Active Capacity : 848 Barrels
Components :
Tanks :
(2) Covered 424-Barrel Tanks with Round Bottoms and Electric Agitators
Each tank contains (2) 5 x 6 x 75-HP Centrifugal Pumps, Remote Hopper Skid
Mud Processing Skid :
Hydraulically Raised
(3) Brandt King Cobra Shakers
Brandt DG-10 Degasser
Brandt 16 Cone Desilter
Trip Tank Skid :
106-Barrel Capacity
2 x 3 x 25-HP Centrifugal Pump
Suction Tank :
424-Barrel Capacity
(2) 6x5x14 Centrifugal Pumps
Includes 100-Barrel Slug Tank
Intermediate Tank :
424-Barrel Total Capacity
(3) Separate Tanks at 141 Barrels each
(2) 6x5x14 Centrifugal Pumps
Top Drive
1 X 350 T Top Drive Canrig
Overhead String
Configuration :
400-Ton Six Sheave Block
12 Line String
1 3/8" Line
Driller Controls
Type : Drillers Cabin Skid
Features :
Varco Electronic Driller and Block Control System
Block Speed Controls
Joystick Controlled Drawworks Speed
Touch Screen and Manual Control of EDRILL and SCR
Auxiliary Equipment
Automatic Catwalk : Forum, Wrangler, S/N LW06072168PWC36AC
Wireline Unit : Five Star Rig with 25,000ft of .092 Wireline
Motorized Drill Line Spool
Crew Facilities :
Toolpusher and Crew Quarters, Skidded, Furnished, Satellite System
Meeting and Change House Combo Skid
Parts House Skid
Hydraulic Power Unit Skid : with Centrifugal Pumps and Reservoir
Pipe and Kelly Spinner : Hydraulic (Hawk, Spinmaster, Model 550-H)
Fuel Tank : 12,000 Gallons, Double Wall, Skidded with Pump
Water Tank Skid : with Centrifugal Pumps
Hot Water Power Washer
Location : USA
| |
| |
|
Id: WR1027
 Speedstar 70K Drilling Rig - For Sale
Worldrigs ID: WR1027
Description :
1982 Speedstar 70K Drill Rig
740 ft of 5" Drill Pipe
2 Drill collars
Mounted on a CCC (Crane Carrier Company) Truck
Diesel Engine
Location : USA
| |
| |
|
|
|
Id: WR1028
 Drilling Rig for Sale-1.webp) Atlas Copco T4BH (Blasthole) Drilling Rig - For Sale
Worldrigs ID: WR1028 Description :
2006 Atlas Copco T4BH (Blasthole) Drill Rig - S/N: 8513
Cummins QSK19 755HP Diesel Deck Engine - rated 1800 RPM and
(Missing Turbo with Hours Unknown)
IR HR2.5 1250 cfm / 350 psi Air Compressor
2 Motor Spur Gear Power Head
37,500 LBS of Pullback
5 Rod Carousel Set Up for (3) 7” Drill Pipe
Hammer Lubrication
2 Piston Bean Water Injection
2006 Mounted on a CCC (Crane Carrier Company) Truck - VIN1CYDCH4896T047122
Caterpillar C13 Diesel Engine - rated 325 HP - Miles 8,888.7 and Hours 6,496
Jake Brakes
8LL Speed Transmission
Planetary Rears
Note: Can be converted to T4W or T4W DH for water well drilling for an extra cost
Note: Repairs & Services Cost Extra: UL88 Missing, Hoses Missing,
Pump Missing & Valve Missing
Note: Bill of Sale Only
Location : USA
| |
| |
|
Id: WR998
 Altas Copco TH60 Drilling Rig - For Sale
Worldrigs ID: WR998
Description :
2018 Epiroc / Altas Copco TH60 Drill Rig
DH 70,000 lbs of pullback
Mounted on a Peterbilt Truck 367 Truck
Cummins X15 Diesel Engine - rated 600 HP 2017 Emissions Engine
22,000Lb. Front Axles
46,000Lb. HMXRear Axles
Driver Controlled DiffLocks Both Axles
Fuller 18918B Transmission / Namco Transfer Case
IR 1070 CFM / 350 PSI Air Compressor
36 Foot Derick
8,000Ft-Ibs @105RPM
Two Speed Rotary Head 5500 Ft-Ibs @ 145 RPM
4-1/2" X 2-7/8" FI Spindle With 6 Pipe Carousel & Max Casing size 19"
Standard- 3" - 350 PSI Ari Piping,
25 GPM BEAN Water Injection Without Foam
30,000 lb Drawworks - Bare Drum Pull 160 fpm
1000 ft of 5/16" Sandreel Line
Single Rod Loader
Off Board Mud Package with Hydraulic driven Mud Pump (DUPLEX CENTERLINE
MOC NO CLM-7.5" X 10" DSPA - rated 300 GPM @ 400PSI, 100HP) included
Dual JIB Controls
7 Gallon Electric DHD Lubricator
Location : USA
| |
| |
|
Id: WR952
 Atlas Copco RD20 III Drilling Rig - For Sale
Worldrigs ID: WR952
Description :
2006 Atlas Copco RD20 III Drill Rig
Cummins QSK19 Diesel Deck Engine - rated at 755 horsepower
Ingersoll-Rand 1250 cfm / 350 psi air compressor
In and out box
Carousel unmounded but included
Mounted on a CCC (Crane Carrier) with 5 axles
24,739 miles
Caterpillar C13 Diesel Engine
Drill pipe avaiable cost extra
Location : USA
| |
| |
|
|
|
Id: WR39
 Hydraulic Land Drilling Rig - for Sale - New 2000HP
Worldrigs ID: WR39 Description
|
Mast
|
|
Max. hook load
|
440 tn
|
880,000 lbs
|
|
Height
|
36.0 m
|
118.1 ft
|
|
Stroke length
|
22.0 m
|
72.2 ft
|
|
Total height incl. substructure
|
46 m
|
151 ft
|
|
Substructure
|
|
Drill floor height
|
9.0 m
|
29.5 ft
|
|
Clear height below RT
|
7.5 m
|
24.6 ft
|
|
Rotary opening
|
952.5 mm
|
37 ½”
|
|
BOP hoisting system
|
2 x 27.5 tn
|
2 x 55,000 lbs
|
|
Drawworks (AC – geardriven drawworks)
|
|
Rated power
|
2,000 hp
|
2,000 hp
|
|
Hoist capacity
|
440 tn
|
880,000 lbs
|
|
Drill in size
|
38 mm
|
½”
|
|
AC drilling motors
|
2 x 850 kW
|
2 x 1,120 hp
|
|
Max. tubular length (2 x range II)
|
19 m
|
62.3 ft
|
|
Top drive (TDK 65-500 electrically driven)
|
|
Load capacity
|
500 tn
|
1,000,000 lbs
|
|
Drilling torque*
|
63,000 Nm
|
46,500 ft-lbs
|
|
Make up / break out torque*
|
100,000 Nm
|
73,760 ft-lbs
|
|
Static break torque*
|
105,000 Nm
|
77,440 ft-lbs
|
|
Speed range
|
0-115/230 rpm
|
|
Rated power
|
758 kW
|
1,030 hp
|
|
* nominal values
|
|
Hydraulic power unit (HE2100 electro-hydraulic)
|
|
Rated power (main system).
|
1 x 400 kW.
|
1 x 536 HP
|
|
Rated power
(rig-up & emergency system)
|
1 x 160 kW.
|
1 x 215 HP
|
|
Pipe handling system - Vertical handling and storage system
|
|
Max. tubular length
|
19 m
|
62.3 ft
|
|
Drill pipe capacity
|
2 3/8" – 6 5/8".
|
2 3/8" – 6 5/8"
|
|
Drill collar capacity
|
up to 9 ½”
|
up to 9 ½”
|
|
Casing capacity (standard)
|
Up to 20”
|
Up to 20
|
|
Number of pipe racks
|
4
|
4
|
|
Total storage capacity (5“ DP).
|
6,000 m
|
19,684 ft
|
| |
| |
|
Id: WR830
 National 1320 2000 HP Drilling Rig - for Sale
Worldrigs ID: WR830
General Description :
Make : National
Estimated Drilling Depth : 20,000ft
Rated HP : 2000
Mast :
Height : 142ft
SHL Load Capacity : 1,000,000lbs
Substructure :
Make : Skytop Brewster
Style : Self Elevating
Height : 30ft
Clear Height : 27 ft
Casing Capacity : 1,000,000lbs
Skin System : Jack Skidding
Drawworks :
Make : National
Power Rating : 2000 HP
Input Power : 2GE 752
Brake Type : Emalco
Drilling Line Size : 1 - 1/2""
Auxillary Brake : Baylor 7040
Power Generation :
Engines : 3 Cat D399 PC
Generators : 3 Kato 1050 KW
SCR System :
Make : Ross Hill 5 Bay
MCC Unit :
Make : Siemens 1000 VDC
Frequency : 60 HZ,120 V
Mud Pumps :
Make : National Oilwell
Model : A1700-PT 3ea.
Power : 6ea.GE 752 DC
Pressure Rating : 5000 PSI
Mud System :
Active Mud : 2,400 Bbls
Suction : 742 Bbls
Reserve : 863 Bbls
Pre-Mix : 138 Bbls
Trip Tank : 63 Bbls
Shale Shakers : 3 ea Derrick
Desander : Derrick 2-10"
Desilter : Derrick 16-4"
Well Control :
Bop :
21-1/4" 2000 PSI
13-5/8th 5,000
Choke Manifold :
Hydraulic
4-1/16" 5,000psi
BOP Closing Unit :
Koomy Type 80
3,000psi
Enhancements :
Mud Cooling System
Drilling Instrumentation
Workshop
Mud Lab
Cutting and Welding Equipment
& Much More
Location : Asia
| |
| |
|
Id: WR977
 Atlas Copco D65 Flexiroc Drilling Rig - For Sale
Worldrigs ID: WR977
Description :
2014 Atlas Copco D65 Flexiroc Drill Rig
11.082.4 Hours
Cat C15 diesel engine - Tier IV
Atlas copco 995 CFM/435 PSI Air Compressor
Set up for 4” drill rod
Back up Camera
Chain feed Central greaser
Auto pipe thread greaser
Auto stops do not work on feed to lead pipe needs to be done manually
Needs dust hose and other normal wear and tear
Location : USA
| |
| |
|
|
|
Id: 9000-443
 Lewco Cameron LDW 750K Drilling Rig for Sale
Worldrigs ID: WR513 Drawworks
Lewco/Cameron LDW 750K 1500 HP , Low low rated
648,000#, single line pull, w/10 lines, w/2 AC 1150 input,
gear drive. Hydraulic Actuated, Parking disc brake,
1 3/8” wirerope 6x19 IWRC.
Prime Power
Omron/IDE 4 VFD System, (3) Cat 3512’s with Kato
1365KW AC Generators.
Auxillary
Cold start air system, primary rig air supply, floor hoisting
systems.
Mast/Substructure
DSI 152’, 750,000# hook load, with 12 lines strung, Singshot
design, 500,000# setback, Crown block (6) 50” sheaves 1 3/8”
groove, Fastline (1) 60” 1 3/8” grooved.
Top Drive/Traveling Block/Pipe Handling
CanRig 1250 500Ton AC Top Drive, American Block B60F500
Block, RT 275, 27 ½” Rotary w/400HP AC input.
Mud Pumps
(2) Lewco WH-1612 1600HP, 5,000psi, each driven by (2)
1150HP AC input motors.
Mud System
(2) tank system, 1200 bbl capacity, (2) Swaco Mongoose shale
shakers, 6-Oil Works 15HP agitators, Derrick desander 2 12” cones
with 5x6 centrifugal driven by 100 HP electric motor, NOV Derrick
desilter 12 4” cones with 6x8 centrifugal driven by 100 HP electric
motor, NOV Derrick Vaccu Flow 1200 Degasser, 48 x 20 gas buster.
BOP Equipment
13 5/8” 5000# annular, 13 5/8” 5000# double ram, 3000 PSI accumulator,
120 gal, 5 station with remote, 4 1/16” 5000# x 2 1/16” 5000# choke
manifold.
Fuel Tank : 18,000 gal
Water Tank : 500 bbl
Auxiliary
Deadline Anchor, Weight indicator, Pump SPM and PSI,
manual Tongs, elevators, slips and clamps
| |
| |
|
Id: 9000-411
 Foremost CTR Single Coil Tubing Hybrid Drilling Rig
Worldrigs ID: WR332 Drawworks
Foremost hydraulic drawworks, 95,000 lb capacity, 400' drum capacity
Drawworks Power
Detroit series 60 floor engine
Hydraulic Power Unit
w/ (5) main hydraulic pumps, hydraulic reservoir, thermal exchanger, plumbing , filters.
Mast
Foremost 85' mast, 140,000 lb maximum hook load w/ (4) lines, 1" drill line, (2) 4 stage
mast raising cylinders, chains, stand pipe, hydraulic piping, utility winch, access ladder,
lighting, fall arrest
Substructure
Foremost trailer mounted raised substructure; sliding trolley ВОРhandler
w/ (2) hydraulic cylinders, manual cellar controls, standpipe valve, steam manifold,
explosion proof lighting, mounted on 2005 peerless Т/Р16 wheel trailer, tires 11 r22.5,
steel buds, spring suspension, w/ rear outriggers, front leveling jacks, hydraulic & electrical
lines"
Rotary Table
16" rotary table, w/ 1,600 lb torque, 140,000 lb maximum load
Top Drive
Fluid design solutions model FDS240T 70 ton hydraulic top drive w/ integrated swivel,
integral traveling block & backup leg
Injector
Steward Stevenson model M1100SK injector, 110,00 lb lifting capacity, 60,000 lb snub
capacity
Hydraulic System & Components
Raising cylinders, winches , bop handler, doghouse raising system, hoses, filters, valves
- (1) set web wilson type aax manual 2 7/8"- 9 5/8" rotary tongs
- (1) drill pipe elevator
- set handling tools - drill pipe, drill collar slips, safety clamp, drill pipe elevators
- townsend type 85 sph annular preventer, 9" Ñ… 3,500 psi
- (2) townsend model Т88 ram preventer, 9" х 3,000 psi
- control tech working spool, 9" Ñ… 3,000 psi, w/ 2" outlets
- control tech crossover spool, 7" Ñ… 3,000 psi
Mud pump
Mastco pump shack, model JBI JF800 triplex mud pump, detroit series 60 14.7 liter
700 ÐÑ€ diesel engine, tool shop
Mud System
358 bbl mud tank, (4) compartments - 17 bbl trip tank, 88 bbl suction tank,
125 bbl settling tank, 125 bbl shaker tank, mix pump, mixing guns, manifold
- swaco mongoose-pt elliptical-motion shale shakers
- (4) mud guns, (9) flow gates & skimmers
- poorboy 28" in-tank degasser w/ 150' of 8" vent line
- chemical mix barrel w/ 5 hp electric motor
- (2) mission model 40202529 6Ñ…5Ñ…11 pumps, w/ 50 ÐÑ€ electric motor, 4" manifold, w/ (7)
4" butterfly valves, hopper, storage compartment, exhaust fan, mud weight station,
pason equipment
Drill Pipe
(196) joints 3 1/2" range 3 grade Е drill pipe, w/ 3 1/2" if connections
- (23) joints 4" range 3 grade Е drill pipe, w/ 3 1/2" if connections
- (10) joints 4 3/4" drill collars, w/ 3 1/2" if connections
- (10) joints 6 1/4" drill collars, w/ 4 1/2" xh connections
- (20) joints 3 1/2" heví-weight drill pipe, w/ 4 1/2" xh connections
Combination Building
12' Ñ… 54' mounted on 4 member skid, electrical switchgear, transformer,
accumulator plumbing, (15) lockers, (2) benches, w/ 9,000 liter fuel tank, (4) product tanks
Generator 1
Stamford model 6063-МК35 350 kw generator, w/ detroit series 60 475 hр diesel
engine, w/ electric start, lockout box
Generator 2
Stamford model IЕС34-1 142 kw generator, w/ john deere 190 hр diesel engine,
w/ electric start, lockout box
- MCC panel, transformer, starters
Accumulator
Control tech model class 3 accumulator, 80 gallon accumulator, 5 station control,
3,000 psi w/ 178 gallon reservoir, PLC remote, Cat model triplex pump
Air Compressor
National compressed air model nca-16-34GSD air compressor, w/ sullair 2
stage air compressor, 200 hp electric motor, 2005 avis welding & fab 600
Instrumentation
Psi receiver, Selectronix model ST-8 instrumentation diesel day tank, liner rack, utility
bench, tooling, storage cabinets, explosion proof lighting weight indicator, rotary torque
gauge, pump pressure gauges, tong line gauges
Safety Equipment
(3) Scott air packs w/ (2) spare bottles, fire extinguishers, welding shields, safety glasses, first
aid kits, stretcher, eye wash stations, safety signs, lanyards general rig tooling, consumables,
rig supplies, spare parts
Doghouse
9' Ñ… 14', drillers control console, instrumentation, storage cabinets / bench, stabbing valve,
ruffneck heater, Ð/С, shelving
Tool House
314 bbl water tank, access stairs, safety rails, lubster, cat model 310 triplex wash pump, utility
bench, fastener bins, ruffneck heater, storage compartments, tooling
Crew house 2005 shelter rig manager's wellsite: 11.5' x 45', crew washroom, storage area, desk,
couches , fridge, stove, washer, dryer, washroom, sleep area
Hydraulic Catwalk w/ operator enclosure, integral hydraulic power unit, (4) swing out arms,
(4) leveling jacks, hydraulic pump w/ 50 hp electric motor, (3) hydraulic pipe tubs w/ controls,
manifold 2048-F
Choke & Kill Line Valve, 2" x 3,000 psi w/ Hi-Kalibre HCR, manual gate valves, check valves
Choke Manifold, 3" gut line x 5,000 psi, w/ (2) 2" wing lines, (8) 2" gate valves, (2) 3" gate valves,
cortec 2" chokes x 5,000 psi
Flare Tank skid mtd w/ 7' x 8' x 7' tank, w/ (2) 2", (1) 6" knockouts, 3" flare
line, 6" degasser line, safety rails, stairs
Boiler
2005 williams & davis 777 volcano 100 hp boiler
- (4) 2m x 5m rig mats
| |
| |
|
Id: WR1046
 Ingersoll-Rand TH60 Drilling Rig - For Sale
Worldrigs ID: WR1046
Description :
Ingersoll-Rand TH60 Drill Rig
Mounted on a 1999 Paystar 5000 International Truck
CAT C12 Diesel Engine
TH60 was completely rebuilt in 2011
500 cfm / 250 psi Air Compressor
3-inch Rod Carousel with 250 feet of Drill Rods
Winch
Dust Control System
Water Injection Pump
Enclosed Operator Cab
Drill and Engine 4925 hours
Location : USA
| |
| |
|
|
|
Id: WR617
 Trailer Mounted Hydraulic Lift, Super Single Rig for sale
Worldrigs ID: WR617
General Description
Year built/Rebuilt ; 2009
Estimated Drilling Depth : 12,000 ft
Estimated Rig Move Loads : 30
Estimated Camp Move Loads : 3
Rated HP : 550
Mast
Height : 72.00 ft
Static Hook Load Capacity: 500,000 lbs
Mast Racking Capacity : N/A
Subsctructure
Style : Box Type
Height : 14.80 ft
Clear Height : 10.60 ft
Casing Capacity : 500,000 lbs
Maximum Setback Load (lbs.) : N/A
Drawworks
Model : RT400B
Power Rating : 1000 hp
Input Power : 1 ea. Caterpillar C15
Brake Type- Band or Disc : Band
Drilling Line Size : 1 1/8"
Auxiliary Brake : Eaton Airflex/WCB2
Top Drive / Power Swivel
Make : Venturetech
Model : XK-250
Capacity : 250 Ton
Torque-Continuous : 22K ft./lbs
No Swivel
Rotary Table
Power Generation
Engines : 3 ea. Caterpillar C 15
Generators : 2 ea. Caterpillar SR 4
SCR / VFD / DC/DC : Mechanical Rig
Enhancements
Fork Lift : Caterpillar 930 H
Pipe Arm : International Derrick Services
Mud System
Mud Pumps : 2 ea Weatherford Oil Tools MP-10, 1000 hp @ 140 spm
Reserve Mud Volume : 0 bbls
Pressure Rating : 5,000 psi
Active Mud Volume : 700 bbls
Shale Shakers : 2 ea. Derrick Corporation FLC
Desander : Derrick Corporation 10" x 3 Cones
Desilter : Derrick Corporation 4" x 16 Cones
Mud Cleaner : N/A
Centrifuge : N/A
Well Control
Choke Manifold : MDCowan 3 1/8" 5,000 psi
BOP Closing Unit : Burnsco, 5 Station 3,000 psi
| |
| |
|
Id: 1000-417
 Cabot 550 Portable Drilling Unit for sale
Worldrigs ID: WR441
Description
Drawworks
Rebuilt Cabot 550 drawworks with new Mckinney PD 150 water brake
and new brake pads. (2) new Kinecor hydraulic catheads. (2) new braden
PD12 hydraulic winches. Powered by new John Deere 600hp diesel motor
6135H485, Allison transmission CLBT5860DB.
Mast
Franks Cabot 98' 4-leg telescoping double mast, 250,000#SHL, hydraulically
raised and scoped with 5 sheave crown block and 2500' of new 1/1/8" drill line.
New sala block mounted on derrick.
Trailer
All above mounted on a 3 axle trailer
Substructure
3 piece sub with mud boat and ramp. RKB = 12.5'
Air Compressor
New Quincy D350-10 simplex reciprocating air compressor with 10hp
460/3/60 TEFC magnetic starter NEMA 4 enclosure and 200 gal air tank.
Mounted on mud boat.
Rotary Table
Rebuilt Oilwell SA 17 1/23"
Blocks
New Mckinney Artic T160 block hook
Kelly
4 1/4" x 38' long square drive kelly with drive bushings and kelly schuck.
Kelly Drive Bushings
17 1/2" split master bushings
Mud Pumps
#1 Ideco MM700 duplex pump, belt driven by a Cat D379 diesel engine, #2
Ideco MM700 duplex pump belt driven by a Cat D379 diesel engine.
Mud System
(1) 275bbl single tank system with a new 4 panel brandt king cobra shale shaker,
(2) 7.5hp agitators, (1) desander with 2-12" cones, (1) Caustic mixing barrell,
(1) eye wash station, (3) 400 watt lights, (1) mud hopper, (2) 5 x 6 centrifugle
pumps with 2-50hp electric motors.
Generator Skid w/Lubester, Junk Box & Wireline
Generator, junk box with vdoor, wireline unit and lubester all on one skid. Skid is
40'3" long x 14'11" wide. Wireline unit is a new five star 15,000, Generator is a
Cat 320kw powered by a Cat 3408 PC motor with Eaton 45 kva transformer.
Water Tank & Top Doghouse
New 450bbl water tank with top doghouse hinged to support beams to lower into
water tank. New water tank is 35' long x 8'5" wide and has 2-3x2 centrifical
25hp pumps, new doghouse is 7' x 14' plus a porch on each end.
Fuel Tank : New 2000 gallon tank with electric fuel pump
Drill Pipe : 192 joints (6048') of 4 1/2" XH yellow band drill pipe
Drill Collars : 12 drill collars 6" - 6 1/4" with 4 1/2" XH connections
Subs : 6 lift nipples 4 1/2" XH pins
Pipe Baskets : 3 pipe baskets on skids
Catwalk : (1) 41" wide x 52' long and 46" high catwalk with pipe groove
Misc
1 new 55' 5000psi 4" kelly hose
2 new 15'4" x 5000psi vibrator hoses
1 new 12'4" x 5000psi vibrator hose
New 2" hoses with 2" high pressure manifold
1-6 mud jet
| |
| |
|
Id: WR871
 1500 HP Mechanical Land Rig for Sale
Worldrigs ID: WR871 Description :
Rated Depth : 3500m (5” DP)
Year : 2007
Actual Status : Warm stacked
General Rig Specifications :
Derrick and Substructure
Derrick/mast
Make type : Skytop (open view)
Height m : 44
Width of base m x m : 16.405 x 7.054
Gross nominal capacity MT : 250
Number of lines No : 10
Ladders with safety cages and rest platform : Yes
Counter balance, system for rig tongs and pipe spinning tong
Derrick / Mast to be fitted with heavy duty, vapour tight, fluorescent
lighting system, certified for use in division 1 or division 2
areas as required by IP, API c/w safety retaining wires : Yes
Racking Platform
Racking platform capacity of 3.5" DP m : 5000
Racking platform capacity of 5" DP m : 3800
Racking platform capacity of 4.75” DC No : 7
Racking platform capacity of 6.5" / 6.75” DC No : 4
Racking platform capacity of 8" DC No : 4
Racking platform capacity of 9.5" DC No : 4
Casing Stabbing Board
Adjustable from/to height m : 8 – 11m from rig floor
Substructure
Make/type : Aztec
Height m : 7.75
Width m : 7
Setback capacity MT : 150
Simultaneous setback + Hookload capacity MT + MT : 400
Clear height below Rotary Table beams : 6.75
Provision for single hole and Kelly scabbard : Yes
Skidding capability : Yes
Draw Works and Associated Equipment
Draw Works
Make/type : RMI
Drum type (Counterbalanced/Grooved) : Lebus Grooving
Spinning cathead type : EZY Torque
Breakout cathead type : EZY Torque
Crown block safety device : Yes
Crown block safety device model : Crown-O-Matic
Input power continuous HP : 1200
Input power maximum HP :1500
Drum diameter mm : 640
Maximum line pull MT : 250
Blockline size inch/mm : 1 ¼ “
Independent fresh water cooling system for draw works and brake : Yes
Draw Works Power
Type : Mechanical
Number of engines No : 2
Engine make : GM Detroit Deisel
Engine model : 12V92
Output power continuous HP : 1200
Output power intermittent (max.) HP : 1600
Auxiliary Brake
Make : Parmac
Model : V80
Independent fail safe back-up system (specify type) : Yes, hydraulic
Hoisting Equipment
Crown Block
Make/type : Aztec
Rated capacity MT : 250
No. of sheaves : 6
Sheave diameter mm : 762
Sheave grooved for line size mm : 32
Crown-o-matic : Yes
Pad-eye for wire line logging blocks, certified to 10MT : Yes
Travelling Block
Make/type : Jereh / YG225
Rated capacity MT : 225
No. of sheaves : 5
Sheave diameter mm : 1120
Sheave grooved for line size mm : 32
Hook
Make/type : Jereh / YG225
Rated capacity MT : 225
Complete with spring assembly/hook locking device : Yes
Swivel
Make/type (Incorporated Kelly spinner, double acting) : Jereh / XLS225 with spinner
Rated capacity MT : 225
Test/working pressure mPa : 35
C/W gooseneck and wash pipe minimum ID mm : 75
C/W 6 5/8" reg. left hand pin connection : Yes
C/W access fitting for wireline entry on top of gooseneck : Yes
Drilling Line
Size (min.) mm : 32
Type : 6 x 19 IPS IWRC
Length (min.) m : 1000
C/W support frame for drum/cover : Yes
Drilling line drum power driven : Yes
Spare reel drilling line : Yes
Anchor Dead Line
Make/type : Jereh
C/W weight sensor : Yes
Rotation System
Rotary Table
Make/type : Jereh / ZP-275
Minimum opening in : 27 ½ “
Rated capacity MT : 450
Maximum continuous torque Nm : 28,000
Master Bushings (split hinged master bushing c/w lock down)
Make : Jereh
Type : ZP-275
Full range of inserts bowls to suit running all casing sizes:-
18- 5/8””, 13-3/8”, 10-3/4”, 10”, 9-7/8”,9.5/8”, 7”,6-5/8”,4-1/2”
Including dedicated lifting slings and bit breaker adapter plates : Yes
Kelly Bushing
Make : Jereh
Type : Square
Top Drive
Make : DJ Petroleum
Type : TD40HY
Rated Capacity MT : 250
Test/Working Pressure mPa : 70/35
Type of drive motor : Hydraulic
Output Power (Continuous) HP : 540
Output Torque (Continuous) Nm : 35,000
Two speed gearbox : Yes
Maximum Rotary Speed rpm : 180
Top Drive (cont.)
Remote Upper IBOP : Yes
Wireline entry possible from top of unit : Yes
Fitted with pipe handler for remote breakout/make-up : Yes
Make up torque Nm : 50,000
Break out torque Nm : 50,000
Derrick Winches
Rig Floor Winches
Type : Hydraulic
Capacity MT : 5
Wire diameter mm : 12.7
Automatic brakes : Yes
Overload protection : No
Automatic spooling : No
Monkey Board Work Winch
Type (air winch or hydraulic racking arm option) : Hydraulic
Capacity MT : 1.5
Wire diameter mm : 6.35
Automatic brakes : No
Overload protection y/n : No
Automatic spooling y/n : No
Rig Floor Man-Riding Winch
Fully Certified for “man-riding” : Yes
Type : Hydraulic
Non-twist wire : Yes
Wire diameter mm : 12.7
Automatic brakes : Yes
Overload protection : Yes
Automatic spooling : No
Rig Power Plant
Diesel Engine Plant
Quantity No : 2
Make : GM Detroit Deisel
Type : 12V92
Maximum continuous power HP : 830
At rotation speed of RPM : 1900
Equipped with spark arrestors : Yes
Mufflers installed : Yes
Emergency Shutdown
Required emergency shutdown switches for the complete
power system located at the drillers position and power plant : Yes
Emergency Lighting System
Battery back up emergency lighting system. Lighting units
situated at key locations around rig and rig site offices : Yes
Auxiliary Power Supply
Provision for power supply for a mud logging unit with a typical power
requirement of 220 Volt, 60 Hz, single/three phase as available : Yes
Rig Service Air System
Air Compressors
Quantity No : 3
Make/ Model : FS TA-120
Rated capacity L/min : 1591
Working press Bar : 9.65
Rig Site Fuel System
Quantity No : 2
Capacity L : 20,000
Detailed specification will be given on request.
| |
| |
|
|
|
Id: WR1068
 Ingersoll-Rand TH60 Drilling Rig - For Sale
Worldrigs ID: WR1068
Description :
2004 Ingersoll-Rand TH60 Drill Rig
IR 1070 cfm / 350 psi Air Compressor - Rebuilt in 2021
Set of for 3-1/2” x 20 ft Drill Rods
New Transfer Case installed in 2022
Mounted on International Truck
Cummins Diesel Engine
Water injection pump
Hammer Oiler
400 Ft of drill pipe included
Location : Canada, North America
| |
| |
|
Id: WR823
 National Oilwell Model 5C Rig for Sale
Worldrigs ID: WR823
Specifications
Single Drum D500BB Drawworks with 1” drill line
Sand Drum, 160BB with 9/16” swab line
104’ x 250,000# Derrick with rods & tubing racking boards
Detroit Diesel Series 60, 500 HP engine
Allison 4700-OFS Transmission with drop box
Traveling Block, Ideco DS110, slotted speed kit design, 2 sheaves, 110 ton
Foundation, steel scissor beam on 3” x 12” timbers
Disc Assist Brake, model 54, 48” mounted at the drum
Tong, Gill model 500 with back up head
Blowout Preventer, Townsend Type 81, 7-1/16”x 5000 psi. double stack
Stripper Head, Hall style 1500 psi.
Tubing Slips, Guiberson 60 ton, air operated
Rod Elevators, 5/8” to 1”
Tubing Elevators, 2-3/8” to 2-7/8” EUE
Wash Swivel, King 53GA
Hand tools
| |
| |
|
Id: WR1011
 Ingersoll-Rand TH55 Drilling Rig - For Sale
Worldrigs ID: WR1011 Description :
1979 Ingersoll-Rand TH55 Drill Rig
Water Well / Geothermal Drill Rig
50SDS (piston) Air Compressor (approximately 200 CFM)
3x4 centrifugal mud pump
Mounted on a International Truck
DT466 diesel engine with roadranger transmission
Note: Truck is not in very good shape (has some holes rusted in floorboard
and passenger side fender flare missing), but engine runs
Drill will need new kelly hose, some hydraulic hoses and likely some other
things but dont currently have detailed condition report available
Comes with 300 ft. of drill pipie (20 ft lengths x 3-1/2” OD x
2-3/8 ft IF threads) 3-1/2” OD x 2-3/8” IF), also comes with a
couple stabilizers, suction hose, etc
Location : USA
| |
| |
|
|
|
Id: WR992
 Atlas Copco RD20 Range III Drilling Rig - For Sale
Worldrigs ID: WR992
Description :
2007 Atlas Copco RD20 Range III Drill Rig - S/N# 21103
Ingersoll-Rand 1250 cfm / 350 psi Air Compressor
Cummins QSK19 Diesel Deck Engine
30,000 lbs Pulldown
120,000 lbs Pullback Capacity
No Carousel
Hydraulic Utility Winches
(5) Hydraulic Leveling Jacks
4 Piston Bean Water Injection Pump
Drillers Control
Mounted on a CCC (Crane Carrier Company) 5-Axle Carrier with Single Man CAB
VIN: 1CYDGV5887T047843
C-13 Diesel Engine
Eaton 8 Speed Transmission
Shows 15,821 Odometer Miles
Location : USA
| |
| |
|
Id: WR1014
 Diedrich HD D-50 Track Drilling Rig - For Sale
Worldrigs ID: WR1014
Description :
2018 Diedrich HD D-50 Track Drill Rig
John Deere 4-cylinder Turbo Disel 4.5L
Powertech Tier-3 Engine with-6000 hours
3L6 Mono Pump
250 gallon steel water tank
Tramming winch
Auto hammer (no Cathead)
Rear auger rack
Custom rod racks (10ft & 5ft)
2 Remote controls
Slide base in/out wiggle tail
Three hydraulic work hoists (Main #7000, Aux #2000, WL #800)
Breakout wrench
Through spindle mounted king water swivel
Hydraulic rod table/clamp
Dropdown side work table
Custom drillers plaorm
Flip down sheave block for lower tramming/travel clearance
SPT auto hammer calibraon cerficaon
D50
Location : USA
| |
| |
|
Id: WR1040
 Ingersoll-Rand T4BH Drilling Rig - For Sale
Worldrigs ID: WR1040 Description :
1999 Ingersoll-Rand T4BH Drill Rig - S/N: 6340
Note: set up for BH (blasthole drilling)
New IR 1050 cfm / 350 psi Air Compressor (needs to be installed at EWD)
Cummins QSK19 diesel deck engine - 3,500 hours since rebuilt
2 motor Spur gear head
37,500 LBS of pullback
2 piston Water injection pump
New gearbox, new cooler, rebuilt pumps and much more in 2022
6 drill pipe (4-1/2"x 25 ft x 3-1/2")
Rear operators cab
Mounted on CCC (Crane Carrier Company) Truck
Cummins L10 diesel engine
Note: Can be converted to T4W or T4W DH for water well drilling)
Location : USA
| |
| |
|
|
|
Id: WR918
 Schramm T64HB Drilling Rig - For Sale
Worldrigs ID: WR918
Description :
1977 Schramm T64HB Drill Rig
Retrofitted
Sullair 900 cfm / 350 psi Air Compressor
Caterpillar 3406 Diesel Deck Engine
3-Piston T Series 47 General Pump T921 Water Injection Pump
4 Rod Lazy Susan set up for 4.5" Diameter 20ft Rods (2 Rods Included)
Pipe Rack
Hydraulic Leveling Jacks
Mounted on a 1977 International Paystar 5000 Truck - VIN #D3127GGB13741
Diesel Engine
Location : USA
| |
| |
|
Id: WR594
 IDECO H44 Truck Mounted Drilling and Work-Over Rig for Sale
Worldrigs ID: WR594
Model : H44
Manufacturer : IDECO
Year : N/A
Condition : Used
Description :
IDECO H44 Truck Mounted Drilling and Work-Over Rig
Single drum drawworks
Lebus grooved for 1 1/8 inch drilling line
Foster make-up and break-out catheads
Parmac SR 22’’ single hydromatic brake
Ideco KM-108-268 AGH Mast
108’ hydraulic raising rams
5 sheave crown w/ Safety Platform
Single cab five axle carrier
(2) Detroit Series 60, 475 hp each
each with Allison CLBT-5860 transmissions
2 Mud pumps Triplex National Oil Well 7P-50 with CAT 379 with air start
Shopbuilt 8’W x 18’L doghouse with 4’L covered porch
Generator/Utility House - GM series 60 385 Kw engine & CAT 3306 200 Kw Diesel Engine
12’ X 40’ mud tank complete with shaker
Water Tank – shopbuilt
Fuel Tank
Rotary Tongs – Byron Jackson type B
Elevators – 4-1/2”, 250 Ton BN, CL
Elevators – 7-1/2”, SS, CL
Pipe Slips – (2) 4-1/2”
Collar Slips – 8-Segment, 10-Segment
100 Drilling tubes (4 1/5 inch diameter and 31 ft length each)
Other Auxillary Equipment
Location : Middle East Region
| |
| |
|
Id: WR1066
 Driltech D40K Drilling Rig - For Sale
Worldrigs ID: WR1066
Description :
1978 Driltech D40K Drill Rig
Sullair 750 cfm / 350 psi Air Compressor (Factory Rebuilt 5,415 hours since)
GD 5X6 Mud Pump Rebuilt Fluid End (1 job since)
CAT 3406B Diesel Deck Engine - rated 400 HP (Rebuilt 1,110 +- hours since)
Dual Carousels
Includes 1,000ft of 4.5" X 25ft Drill Pipe and Breakout Tools
Mounted on a CCC (Crane Carrier Company) Truck
Cummins NTC400 Big Cam Diesel Engine - rated 400 HP (Rebuilt 2,500 +- hours since)
Brand New Rear Tires
Location : USA
| |
| |
|
|
|
Id: WR994
 Schramm T64HB Drilling Rig - For Sale
Worldrigs ID: WR994
Description :
Schramm T64HB Drill Rig - S/N: T64HB-622
Detroit 8V71 diesel deck engine
450 CFM / 250PSI piston air compressor
3 cylinder Water injection pump
(3) leveling jacks
Pipe Rack
300 ft. of used CP style 20ft x 4-1/2" Drill Rods Included
Mounted on a 1973 GMC 6500 Truck
C70 with a gas engine
Location : USA
| |
| |
|
Id: WR808
 NOV 1000 HP AC/VFD Drilling Rig for Sale
Worldrigs ID: WR808
Description :
General Description :
Make : NOV
Year Built/Rebuilt : 2008
Estimated Drilling Depth : 12,000 ft
Estimated Rig Move Loads : 17
Estimated Camp Move Loads : 26
Rated HP : 1000
Mast :
Height : 80.00 ft
Static Hook Load Capacity : 500,000lbs
Mast Racking Capacity : N/A
Substructure :
Style : Parallelogram
Height : 20.00 ft
Clear Height : 18.00 ft
Casing Capacity : 500,000lbs
Maximum Setback Load : N/A
Drawworks :
Make : NOV
Model : SSGD-250
Power Rating : 1,500 hp
Input Power :
2 ea Baylor
CM632UU1129A
Brake Type : Disc
Drilling Line Size : 1 1/4”
Top Drive / Power Swivel :
Make : NOV
Model : TDS 10-RR
Capacity : 250 Ton
Torque – Continuous :
Max RPM
20,000 ft-lb
@ 87 RPM
Swivel :
None
Rotary Table :
None
Power Generation :
Engines :
3 ea Caterpillar
3512 B
Generators :
3 ea Caterpillar
SR4B
SCR / VFD / DC/DC : VFD rig
Mud System :
Mud Pumps :
2 ea NOV
F-1000
Power Rating :
1000 hp
@ 140 rpm
Pressure Rating : 5,000 psi
Active Mud Volume : 1,080 bbls
Reserve Mud Volume : 0 bbls
Shale Shakers :
4 ea Brandt
King Cobra
Mud Cleaner : N/A
Desander :
Brandt 10”
X 3 Cones
Desilter :
Brandt
DSLR-20GG-4CTX
Centrifuge : N/A
Well Control :
Annular :
13 5/8” 5,000 psi
-1, Hydril, GX
21 ¼”-2000 psi
-1, Shaffer
Double Ram Preventer :
[Cameron] -1
Cameron,
U Double BOP
with Large Bore
Shear Ram
Choke Manifold :
Shaffer 3 1/8”
5,000 psi
BOP Closing Unit :
Shaffer 6 station
3,000 psi
Enhancements :
Forklift : Caterpillar It 62H
Iron Roughneck : NOV ST-80 R
Power Slips : NOV PS-21
Tubular Loading SYS : NOV TLS-6000
| |
| |
|
Id: WR890
 Tech RT 400 Hydraulic Drilling Rig for sale
Worldrigs ID: WR890 Specifications
- Rig Tech Rt 400 525 Hp Grooved F/ 1-1/8" Line P/B Detroit Series 60 Diesel Eng, Allison 6610 Trans,
Eatonauxiliary Brake, International Derrick Service 67'h X 8'w, 500,000# Gnc, Hyd. Raised Mast Mtd. On 3-Axle
- Carrier W/ Venture Tech XK250 Hyd. Top Drive, Ids 12'hx 10'w Substructure W/ Mud Boat Skid &
Pipehandlingboom Arm (Note: 10'7" Clearance Under Rotary Beams) Sub & Mast
- Brake Cooling Unit, Approx. 600-Gal Water Tank W/ Allen Bradley Switch Gear, (2) Cobra 2 X3 X 11
Cent Pumps, P/B 25 Hp Elec. Motors, Skidded.
- Kohler Model 400dse 380 Kw Ac Gen, S/N: 2023744,P/B Detroit Series 60, 585 Hp @ 1800 Rpm Diesel
Eng, S/N: 06R0815243, W/ Elec. Starter,Radiator, Gauges, Skidded; Marathon Model 400d8E 380 Kw Ac
Gen, S/N: 2019092, P/B Detroitseries 60, 685 Hp @ 1800 Rpm Diesel Eng, S/N: 06R0805025, W/ Elec.
Starter, Radiator, Gauges,Skidded; Venture Tech Hpu 250-Ton Hyd. Power Unit, P/B Detroit Series 60
Diesel Eng, S/N:06r0805644 W/ Elec. Start; Paletec Model 25DG Air Compressor, P/B 25 Hp Elec.
Motor W/ Air volume Tank; 12'w X 50'l Utility House W/ Cutler-Hammer Series 2100 Elec. Controlpanel
W/ Wiring, 75 Kva Elec.Transformer, Fluorescent Lights, Skidded.
- Rs-F1000 Triplex Mud Pump, 1000 Hp, Steel Fluid End, W/ Quick-Change Caps, O'drill 3" Shear
Relief Valve,Rod Cooling Pump, Wedco 6000# Pressure Gauge,Bull Wheel, Master Skidded; Mud
Hog 5" X 6"Chargingpump, 5000# Pulsation Dampener, P/B Detroit.
- Hydril GK-10-900, 11" 3000# Annular Bop.
- 8'w X 20'l Crimped Steel Top Doghouse W/ Round Top, Knowledge Box, (4) Lockers, Bench Storage,
Cabinets, Parts Bins, 4-Station B.O.P. Remote Closing Unit, Fluorescent Lights, Heater, Skidded;
Drillers House Telescopes Down To 21'l Porch Extension W/ Junk Box Unitized On A Skid W/ 7'9"W X 20'l
Crimped Steel Change House W/ 7'3"L Covered Porch Ext., Round Top, (13) Lockers, Bench Storage,
Parts Bins, 5-Station Type 80 Closing Unit.
- 7'10"W X 8'4"H X 40'l 423-Bbl. Water Tank W/ 8'l Porch Covered Ext. W/ Mud Hog & Double Life 2" X 3"
Cent Pumps, Skidded.
- 8' Dia X 27'3"L 13,000-Gal Fuel Tank W/ 4'11"L Porch Ext. & 7'10"L Porch Ext. (2) Fuel Transfer Pumps P/B
3 Hp Elec. Motors, 5-Compartment Lubester, Skidded
- Federal Pacific 112.5 Kva Transformer W/ Lift Frame.
| |
| |
|
|
|
Id: WR984
 Atlas Copco T30 Power ROC Crawler Drilling Rig - For Sale
Worldrigs ID: WR984
Description :
2016 Atlas Copco T30 Power ROC Crawler Drill Rig
S/N: TMG16SED 0064
4522 Hours
Cummins QSB4.5 Diesel Engine - rated 155 HP
Drifter YD14S - S/N: AVO15D408
Main Pump Rebuilt 1500 Hours Ago
Both Final Drives (Rebuilt 200 Hours Ago)
Set Up for T45
Hole Size 1.75 TO 3.5"
14 FT Start 12 ft Drilling Steel
| |
| |
|
Id: WR1024
 Generic Bucket Style Drilling Rig - For Sale
Worldrigs ID: WR1024 Description :
Bucket Style Drill Rig
Detroit Diesel Deck Engine
Mounted in a 1984 International 4370 Series truck
Tandem Axle
Cummins Diesel Truck Engine
Note: Bill of sale only (no-title) & Selling "as is, where-is".
Location : USA
| |
| |
|
Id: WR1039
 Mobile Drill B-57 Auger / Coring Drilling Rig - For Sale
Worldrigs ID: WR1039
Description :
Mobile Drill B-57 Auger / Coring Drill Rig - Serial : 90091
Cummins 4 Cylinder Deck Diesel Engine
Mounted on a 1990 Ford F800 truck - VIN : 1FDXK84A6LVA47983
Miles : 106,812 on odometer
Ford 6-cylinder Diesel Engine Displacement : 7.8L
Manual 10 Speed Transmission
Axles : Tandem
Lift axle
Pusher axle
GVWR : 30,000
Features : Bed/drill
Bean Triplex Piston pump
Saftey hammer
Tires Size : 11R22.5
Location : USA
| |
| |
|
|
|
Id: WR658
 2013 Built Mechanical Drilling Rig
Worldrigs ID: WR658
General Description
Year Built/Rebuilt : 2013
Estimated Drilling Depth : 13,100 ft
Rated HP : 1000
Mast
Height : 103.00 ft
Static Hook Load Capacity: 500,000 lbs
Mast Racking Capacity : 16,500 ft
Substructure
Style : Parallelogram
Height : 22.00 ft
Clear Height : 18.00 ft
Casing Capacity : 500,000 lbs
Maximum Setback Load (lbs.) : 320,000
Drawworks
Make : Honghua
Model : JC 40
Power Rating : 1000hp
Input Power : 2 ea. Caterpillar C18
Brake Type - Band or Disc : Band
Auxiliary Brake : Eaton Eaton
Drilling Line size : 1 1/4"
No Top Drive
Swivel
Make : NOV
Model : S-150
Capacity : 150 Ton
Rotary Table
Make : Lanzhou Zhongshi ZP-275
Table Opening : 27 1/2"
Maximum Load Rating : 450 Ton
Power Generation
Engines : 2 ea. Caterpillar C15
Generators : 2 ea. Caterpillar S-Star
SCR / VFD / DC/DC : Mechanical Rig
Enhancements
Power Slip Frame : Cavins/LT92113
Mud System
Mud Pumps : 2 ea. Honghua HHF 800 800hp @ 150 spm
Reserve Mud Volume : 415 bbls
Pressure Rating : 5,000 psi
Active Mud Volume : 1095 bbls
Shale Shakers : 2 ea. Derrick Corporation FLC 503
Desander : N/A
Desilter : N/A
Mud Cleaner : N/A
Centrifuge : N/A
Well Control
Annular :
7 1/16" 5,000 psi, Jiangsu Xinde,FH18-
Double Ram Preventer:
11" 5,000 psi, Jiangsu Xinde, FH28-
7 1/16" 5,000 psi, Jiangsu Xinde, 2FZ18-
Choke Manifold : Chengde Kingdream Petroleum JG 65/65-35
BOP Closing Unit : Guangzhou Dongsu FKQ640-6
| |
| |
|
Id: WR568
 National 110 Drilling Rig - 1500hp - for Sale
Worldrigs ID: WR568 Drawworks :
National 110-UE 1500 HP, low low rated 605,000#, single line pull, w/10
lines, driven by (2) GE 752 DC motors, Wichita 336 air operated/water
cooled disc brake, 1 3/8” wire rope 6x19 IWRC
Prime Power :
Omron/SCR System, 3 generator bays, 4 SCR bays, (3) Caterpillar
3512B w/Kato 1365 KW gen sets
Auxiliary :
cold start air system, primary rig air supply, floor hoisting systems
Mast/Substructure :
DSI 142’ 1,000,000# hook load, slingshot design 27’ RBC, 25’
RKB, 600,000# set back, Crown Block 6-60” Sheaves 1 3/8” groove,
Fastline 1-60” 1 3/8” groove, hydraulic jack skidding system.
Top Drive – Traveling Block – Pipe Handling :
Varco TDS11SA VF AC 500 Ton, Continental Emsco 500 Ton Block,
SJ Petro 27 ½” rotary/independent driven.
Mud Pumps :
(2) RSF1600 1600HP Triplex, 5000#psi driven by (2) each, GE 752 DC
motors.
Mud System :
(3) tank system, 1200 bbl active capacity with 150 bbl TT, tandem
WFSI linear shale shakers, (8) NOV Max 2000 10HP mud agitators,
Derrick desander (2)12” cones with 6x8 centrifugal driven by 100 HP motor,
Derrick desilter (12) 4” cones with 6x8 centrifugal driven by 100 HP motor,
NOV D-1000 degasser and 48 x 20 gas buster.
BOP Equipment :
13 5/8” 5000# annular, 13 5/8” 10,000# double ram, Advanced
Pressure 3000 psi accumulator, 180 gal, 6 station with remote,
4 1/16” 10M x 3 1/16” 10M choke manifold.
Fuel tank : 18000 gal
Water tank : 500 bbl
Auxiliary Equipment :
Deadline Anchor, Weight indicator, pump SPM and PSI, top
drive control house, SCR system controls, VF House and MU/BO
torque, manual tongs, elevators, slips and clamps.
| |
| |
|
Id: WR887
 3000HP Electric Deep Drilling Rig - For Sale
Worldrigs ID: WR887 Rig Specifications
A. General Rig Specification :
The rig will be suitable for operation in the temperature range 0°C to 55°C
General Description :
- Drilling depth: 9000m(4-1/2"DP)
- Max hook load of mast and substructure: 6750KN
- Travelling system: 7×8
- Diameter of drilling line: 1-5/8"(42mm)
- Top drive: DQ90BS-JH
- 37 1/2" electric motor driven Rotary table
- Rated input power of drawworks: 3000HP
- Mud pump unit: 1600HPX3
- Mast type and effective height: K type, 49.5m
- Substructure type and clear height: Slingshot,42ft/12.8m
- Electric drive type: AC-VFD-AC
- Rig power system: 7xCAT3512B, 7X1101bKW 600V/60Hz & 1xCAT C18, 545KW/60Hz
- Voltage/Frequency/Phase: 600V/480V/110V 60HZ/3phase
- All electric equipments are in accordance with API RP505 standard.
- Main structure painting standard
- Explosion standard: ATEX/IECEX/UL/CNEX
A.1.1. Mast and Associated Equipment : Qty - 1 set
- To be API monogrammed, possessing valid API-4F certificate. Confirmed to API 4F
4th edition,PSL1,SSL: E2 U2.
- Nominal drilling depth: 6000-9000m(4-1/2"DP); 5000-8000m(5"DP);4000-7000m(5-1/2"DP)
- Max. Static hook load: 1,500,000 lbs/750ton/6750KN(7×8 strand,14 lines);
- Effective height:162.5'/49.5 m as per API approved Mast to safely accommodate top drive
and travelling system;
- Height of monkey board(from drill floor):80'4-1/2",83'8",86'11-1/4"(24.5m,25.5m,26.5m);
- Top span(front x side): 8'6-3/4"×7'10-1/2"(2.6m×2.4m);Bottom span(front): 32'9-3/4"(10m) .
- Steel material. Welding Procedure as per AWS.
The allowed wind speed of mast :
- Operating mode(Full stands and full hook load):16.5m/s (32knots)
- Working condition(Full hook load and full rotary beam load ):16.5m/s (32knots)
- Erection condition:16.5m/s (32knots)
- Unexpectable condition (Full rotary beam load and full stands): 30.7m/s (60knots)
- Expectable condition(Full rotary beam load ):38.6m/s (75knots)
- Equipped with two sets of buffer hydraulic cylinders, which can be used for raising and
lowering the mast.
- 2 mast ladders -without cage (one each to monkey board & crown block)
- With hange line for hanging travelling system(include Top drive) when drilling line cutting;
including wirelines,shackles.
- With levelling shims and two (2) 100 tons each hydraulic jacks with hand pumps.
- Four(4) 2t Derrick Hoist Blocks with secondary retention are used.
- Two(2) 4t Derrick Hoist Blocks with secondary retention are used.
- With Mast Raising Line Ø80mm（ 3 1/8"）
- With Mast Support Frame:Using for supporting mast during Rig-Up & Down
- 1 ea. SALA Self-retracting fall arresting devices & Derrick safety harness with frontal
pad for the derrick man to be installed above the derrick board for the derrickman(15m),
- 1 ea.SALA Self-retracting fall arresting devices & Derrick safety harness with frontal pad
for the derrick man to be installed above exit point from the mast ladder to the derrick board
platform at the mast ladder side(15m).
A.1.2. Monkey Board - Qty : 1 set
Monkey board to support :
- 286 stands of 5-1/2" Drill pipes(8000m);
- 6 stands of 8" D/Collars;
- 3 stands of 10" D/Collars;
- 2 stands of 14" D/Collars.
- With adjustable centre diving board and hinged extension. Adjustable 80'4-1/2",83'8",86'11-1/4"
(24.5m,25.5m,26.5m) above drill floor level complete with safety chains on all fingers.With
Mounting bracket to accommodate pullback air winch. Access platform with handrails and
escape line (with easy and safe access) . Logo on the monkey board can be painted as
clients' requirement.Without Wind Wall.
A.1.3. Tubing "Belly" Board - Qty : 1 set
- Tubing "belly" board.
- Features: Completed with walkway and handrails in the outside of tubing belly board.
A.1.4. Casing Stabbing Board - Qty : 1 set
- Pneumatic Casing stabbing board – adjustable from 20' - 50'above rig floor, having two braking devices with
one being failsafe. Both locking devices are independent of each other.
- Operations to be independent of casing tongs.
- The casing stabbing board is equipped with upper and lower limit switches.
- Guardrails and fall protection system will be installed（SALA Fall arrest 3400900）. Full body harness with lanyard
as per BS or ANSI or equivalent International Standards ( 1piece as SALA recommend)
- Adequate anchor points anchor point to be available for connecting the lanyard and Self-retracting fall arresting
devices with full body harness. Anchor points will be positioned independently from the movable stabbing board assembly.
- The stabbing board platform to be installed with one certified safety line,the safety line will connect stabbging board
with one padeye on Mast.
- Air winch on Casing stabbing board:
- Remote pendent control
- Control cord with emergency stop.
A.1.5. Mast Emergency Escape system - Qty : 1 set
- Mast Emergency Escape system with accessories and user manuals
- Mittelmann Mast emergency descent device RG 10D(EN standard)
- The models will be suitable as per the mast / monkey board height and as per manufacturer recommendations.
- The PPE & accessories used in the system for emergency escape willl be as per the manufacturer requirements,
included Satey Harness and anchor block
A.1.6. Derrick Climbers Assist Lines - Qty : 3 set
- Derrick climbers assist lines(one each to monkey board & crown block) complete with lines,certified snatch block.
climber assistor, 3 sets.
A.1.7. Crown Block - Qty : 1 set
- Crown block rated for 1,500,000 lbs/750ton/6750KN static hook load capacity with :
- Seven (7) sheaves cluster of 1524mm(60 inch) sheaves;
- One(1)fast line sheaves 1524mm(60 inch);
- All grooved for φ42mm (1 5/8") drilling line;
- Confirming to API Spec.8C 5th Edition and API Spec 4F latest Edition, PSL1, SSL: E2 U2;
- To be API monogrammed, Possessing valid API-4F and 8C certificate.
- Two (2) 4t Hoist Blocks with secondary retention are used.
- Two(2) 12t Hoist Blocks with secondary retention are used.
- One (1) 25t Hoist Blocks with secondary retention are used.
A.2. Subbase and Associated Equipment - Qty : 1 set
A.2.1 Subbase :
- Rated for 1,500,000 lbs/750ton/6750KN casing load capacity simultaneous with 800,000 lb./400ton/3600KN
setback capacity.
- Rig floor dimensions: 13m×14.8m/42.6ft×48.5ft
- To be API monogrammed, possessing valid API- 4F certificate.
- Confirmed to API 4F 4th edition, PSL1, SSL: E2 U2.
- Steel material
- Welding Procedure as per AWS.
- Drill floor height(from Ground to drill floor): 46.92ft/14.3m;
- Drill floor clear height(from bottom of rotary table beam to Ground): 42ft/12.8m;
- Sub base with clear height under BOP trolley beams：36'/10.97m(from bottom of BOP trolley beams to Ground).
- Substructure type: Sling shot.
- Two(2) Stairways for access from rig floor to ground level and One(1) Stairways for access from rig floor to mud tanks.
- One(1) 2' wide safety slide for emergency escape slide from rig floor to ground level.
- Equipped with two sets of buffer hydraulic cylinders, which can be used for raising and lowering the substructure.
- One stand pipe vertical skid.
- One hanger frame for 2*1.5m³ air receiver.
- Structure to be installed at lower floor position. After mast raised, substructure to be raised up with floor equipments
by two(2) hydraulic winch which are included.
- With Substructure Raising Line Ø38mm（ 1 1/2"）L=325m
- With Rig floor dog house(one air conditioner included),1 set;
- With tool house,1 set.
- With 2 ea. SALA Self-retracting fall arresting devices with Derrick safety harness with frontal pad to be installed under
the Fix anchor point around BOP beams (15m).
- With 1 set Antiskid floor mats for the rig floor, only for main working area of rig floor. (The area between the setback and
drawworks , inside left and right mast leg.)
- With 1 set Drilling Bell nipples for 29-1/2" diverter, 18-3/4" Bops.& 12" Flow line.
A.2.2. A Secondary BOP Retention System - Qty : 1 set
A secondary BOP retention system below the sub-structure with safe rated pad eyes along with accessories including
but not limited to wire rope slings, shackles, pins, chains, hooks etc for the holding the heaviest BOP stack shall be in
place to prevent BOP falls in case of failure of primary retention system (BOP hoist) system during casing slip setting,
casing cutting and other activities.
A.2.3. Drip Pan System under Rig Floor - Qty : 1 set
- Drip pan system under Rig Floor.
- Rig floor to be sealed with all drainage from the rig floor contained in a drain system for discharge to location.
A.2.4. The Safe Working Load (SWL)
The Safe Working Load (SWL) will be prominently marked for all Pad eyes on Mast and Substructure
A.2.5. Mouse Holes - Qty : 1 ea
Mouse holes, 12" OD and 16" OD.
A.2.6. Mechanical Conventional Catwalk - Qty : 1 set
- Mechanical Conventional catwalk size:18000mm(L) ×1500mm(W) ×1070mm(H), two sections.
- Catwalk fitted with 2 each cementing lines & kill lines of 2"IDx 15 M, having slide/ sling gate at Rig .
- The kill line is only fixed under catwalk, and won't lay to ramp and drill floor.
- Cementing Lines and Kill Lines on Catwalk are made by Chinese vendor, as per API 16C;
- Valves on cementing lines and kill lines are from western brand vendor.
A.2.7. Pipe Rack - Qty : 10 pcs
- Triangle pipe rack, length 9000mm, height 1070mm, end with retaining pin
A.2.8. BOP Lifting Hoist System - Qty : 1 set
- BOP lifting hoist system, 150-ton capacity
- Trolley beams mounted on the substructure under the drilling floor with travel of the BOP hoists is to cover
the entire length of sub base.
- Max. hoisting capacity:2×75ton
- Max. hoisting height:4.8m
- Max. hoisting speed:0.6m/min
- Max. lowering speed:1.0m/min
- Max. horizontally travelling speed:6m/min
- Max. working pressure of hydraulic system:21Mpa
- Max. flow rate of hydraulic system:120L/min
- Wireline diameter:44mm
- With One (1) Hydraulic Power unit (Electrical Motor Drive) is used for substructure up/down & BOP
lifting hoist system
A.2.9. Hydraulic Power Unit for Hydraulic Tools - Qty : 1 set
- Hydraulic power unit For hydraulic tools
- Hydraulic unit complete with two (2) hydraulic pumps each driven by electric motors mounted at derrick floor,
for use with rig-floor auxiliary equipment.
- Max.pressure: 3000psi/21MPa
- Rated pressure: 2320psi/16MPa
- Rated output flow: 120L/min
- Effective volume: 1000L
- Main power input: 55kW x 2
A.2.10. Drilling Line Spool for drill line complete with air/hydraulic motor. - Qty : 1 set
- Model:DSJ45Q
- Output drum speed : 0~13r/min
- Output torque:14000N.m
- Max.working air pressure: 0.8Mpa
- Max.load: 20000kg
- Suit wireline:42mm( 1-5/8'')×7500ft
A.3. Draw Works
A 3.1. AC Electric Draw Works
AC Electric Draw works - Qty : 1 set
- Rated for 2200KW(3000HP)input power;
- Nominal depth range up to 30,000 ft;
- Powered by two(2) 5GEB28, 1118kw/1500HP, 600V,Make: GE. With IECEX/ATEX
- Disk Brakes (PSK Model:PS295/6750D) on main drum as fail-safe emergency / parking brake.
- Standard Disc Brake System with air-cooled Discs, 6 x hydraulic service calipers, 4 x Spring-set safety calipers,
independent hydraulic power station , and Control Console.
- Working brake torque:295kN.m,Parking release brake: 190kN.m,Emergency brake: 485kN.m
- Max. fastline pulling capacity:141,000lbs/640KN
- Pulling capacity - 1,500,000/6750 Static hook load@ 14 lines.
- Drum size:Φ915mm×1836mm,The drum is casting part with lebus grooved for 42mm( 1-5/8'') wireline.
( welded,replacable after worn )
- The drum shaft is driven by two (2) sets of two-shift gear box.
Steps of speed: 2+2R(2 steps)
Gear Box ratio:High speed:8.056,Low speed:14.783
- Equipped with pneumatic toggle valve anti-collision device.
- Kinematics draw works brake monitor and control system (Crown saver and floor saver:This is refer to
Anti Collision System (ACS) Ingrated in VFD and Driller's Control - Cabinet system). Crown saver / Crown-O-Matic,
with emergency activator switch on Driller's console.
A 3.2. Auxiliary Brake System - Qty : 1 set
- AC –VFD Rig using regenerative braking, disc brake on main drum to be capable of being used as Auxiliary
brake which included in Item A.3.1
- Disk Brakes (PSK Model:PS295/6750D) on main drum as fail-safe emergency / parking brake.
- Standard Disc Brake System with air-cooled Discs, 6 × hydraulic service calipers, 4 × Spring-set safety calipers,
independent hydraulic power station , and Control Console.
- Working brake torque:295kN.m,Parking release brake: 190kN.m,Emergency brake: 485kN.m
- Rated pressure of hydraulic disc brake operating system: 8 MPa
- Hydraulic power station of disc brake（Air cooling） Model:PY-01F
- Rated pressure : 8Mpa
- Rated to suit minimum static hook load capacity 1,500,000 lbs of draw works.
A 3.3. Electronic Automatic Drilling System - Qty : 1 set
- Electronic automatic drilling system
- Achieved by Seperater Motor control, integrated in VFD system.
- Electronic feed for draw works controls to provide ROP control based on constant ROP, Weight on Bit., differential pump
pressure and torque.
- Four alternative modes include :
- ROP----rate of penetration
- WOB----weight on bit
- MPP----mud pump pressure
- DPT----drill pipe torque
- WEG Auto bit driller motor Model:W22Xd-75kW-4-280S Fundamental frequency power: 75kW
- Fundamental frequency torque : 401 N.m
- Cooling type: Forced air cooling,
- Protection degree of motor : IP56, with IEC explosion-proof certification.
A 3.4. Makeup/Spinning Cathead - Qty : 1 set
- Makeup/Spinning Cathead(Telescope Type)
- Rated working pressure:2320psi/16MPa;
- Rated flow rate:120L/min;
- Wireline pulling force:350,000lb/ 160KN;
- Norminal rope stroke 1500mm
A 3.5. Breakout Cathead - Qty : 1 set
- Breakout Cathead(Telescope Type)
- Rated working pressure:2320psi/16MPa;
- Rated flow rate:120L/min;
- Wireline pulling force:350,000lb/ 160KN;
- Norminal rope stroke 1500mm
A4 Travelling Equipment
A4.1. Travelling Block 750-ton Capacity - Qty : 1 set
- Travelling Block 750-ton/6750KN capacity .
- Number of sheaves:7
- Sheave diameter:φ1524(60")
- Grooved for φ42mm(1-5/8'') wireline.
- Conforming to API 8C 5th Edition PSL1
- To be API monogrammed, possessing valid API-8C certificate.
- With one(1)Hydraulic wireline cutter.
- Max. cutting diameter :48mm; Max.shearing force:20T;
- With six(6) Snake line for wireline stringing.
- Natural length 1600mm,Traction force 40KN.
A4.2. Weldless Elevator Links - Qty : 1 set
Weldless elevator links, 4-3/4" x 252", 750 ton capacity. Conforming to API 8C,PSL1
A4.3. Weldless Elevator Links - Qty : 1 set
Weldless elevator links, 3-1/2" x 144", 500 ton capacity. Conforming to API 8C,PSL1
A4.4. Weldless Elevator Links - Qty : 1 set
Weldless elevator links, 2-3/4" x 132", 350 ton capacity.Conforming to API 8C,PSL1
A4.5. Weldless Elevator Links - Qty : 1 set
Weldless elevator links, 2-3/4" x 252", 350 ton capacity. Conforming to API 8C,PSL1.
A4.6. Drilling Line - Qty : 7500ft
φ42mm(1-5/8'') Drilling line to suit minimum static hook load capacity.
Right hand, as per API Spec.9A.
A.5. Rotary Group and Top Drive
A.5.1. 37-1/2” Rotary Table - Qty : 1 set
- Heavy Load 37-1/2" rotary table:
- Max.Static Load:7250KN;
- Rated Speed:300RPM;
- Gear Ratio:3.62;
- Max.torque:45000N·M(@0-110RPM);
- Make: BOMCO,holding valid API-7K certificate.
- Main AC Motor: 5GEB22A5, 858KW, 600V,Make: GE. With IECEX/ATEX
- Rotary table independent drive device:
- Reducer: i=1.6920
- Coupling: BJS435A
- Cardan shaft:BHJ350F530
- Inertia brake:5022A
A.5.2. Rotary Table Master Bushing and Insert Bowl - Qty : 1 ea
- Complete with a ZP375 master bushing (MPCH), with the following insert bowl:
- Split insert bowl # 1 (11-3/4" – 13-3/8"),1 pc
- Modified Split insert bowl # 1 (to handle 14"tubulars),1 pc
- Split insert bowl # 2 (9-5/8" – 10-3/4"),1 pc
- Split insert bowl # 3 (2-3/8" – 8-5/8"),1 pc
- Lifting hook for removing and installing bushings and bowls( 2 hooks for bowls,4 hooks for bushing).
A.5.3. Casing Bushing - Qty : 1 ea
- Casing bushing, split type for 30",24" and 18-5/8" casing.
A.5.4. False Rotary Table - Qty : 1 set
- False rotary table suitable for running 5-1/2" drill pipe string inside 30" ,24" and 18-5/8" Casing.
- Rated load capacity 200 tons.
A.5.5. Electrical AC or DC powered Top Drive System - Qty : 1 set
- Electrical AC powered Top Drive System
- Model DQ90BS-JH
- Rated Hoisting capacity 750 tons.
- Power Supply 600VAC/50Hz
- Main Motor Rated Power 2X450KW(continuous)
- Drilling Torque 76KN·m
- Max. Break-out Torque 120KN·m
- Rotary Speed 0～220r/min
- Backup Tong Range φ87mm～φ230mm
- Mud Circulating ID Φ89mm
- Equipped with top drive body, top drive guide rail, top drive travelling cable, top drive
VFD room, driller control console.
B Mud System
B.1. High Pressure Mud System
B.1.1. Triplex Mud Pump Unit - Qty : 3 sets
- Triplex Mud Pump, Rated input 1600 HP
- Model ·F-1600HL
- Rated power：1600HP
- Rated stroke：120spm
- Stroke length : 12"
- Ratio：4.206:1
- Max. working pressure：52Mpa
- Valve cavity：API 7#
- Max. liner size：7"
- Inlet flange：12" (305mm)
- Outlet flange：5 1/8"
- Shear pin type safety valve：JA-3
- AC motor
- Qty.: 1 pc for each pump
- Rated power:1200kW
- Rated voltage:600V
- Explosion proof standard: CNEX
B.1.2. WP Rotary Hose - Qty : 2 pcs
- ·4" ID x 75' long x 7500 psi WP rotary hose,FSL Level 2,-20°C ~ 82°C, in accordance with API 7K
B.1.3. WP Bumper Hoses - Qty : 7 pcs
- ·4" ID x 15' long x 7500 psi WP bumper hoses ,FSL Level 2,-20°C ~82°C, in accordance with API 7K
B.1.4. WP Dual Stand Pipe Manifold - Qty : 1 set
- 5"ID x 7500 psi WP dual stand pipe manifold with 5" ID 7500 psi WP full opening gate values feeding with 2 independent
5" x 7500 psi WP mud pump discharge lines coming from a mud pump discharge manifold. Mud pump Discharge manifold
7500 psi WP, to be designed so that any of the 3 pumps can be lined up for 2 mud lines to sub base.
- 2" x 7500 psi valves from manifold to upper kill line, lower kill line, cellar jet and one for displacing cement, or other
general circulating from rig floor level.
- 2" x 7500 psi working pressure steel line with designated valve from rig floor to choke manifold for reverse circulating.
- Gate valve adopts welding valve.
- Stand pipe manifold include five(5) nos 5" gate valves and nine(9) 2" gate valve. Ground HP manifold include ten(10) nos
5" gate valves and one(1) 2" gate valve.
- Gate valve will be from Demco, Union will be from Kemper
B2. Low Pressure - Mud Pump
Design Principals for Mud System
Mud Tank System :
• Mud system total capacity 4990 Bbl (usable) with active Mud system capacity: 1990 Bbls and reserve tanks of 3000 Bbls.
The volume of tanks calculate decrease 150 mm from the top surface of Tanks.
• All the solid control equipments sized for handling 1500 GPM mud.
• Capable of handling mud up to 21 ppg.
• All reserve pits are to be connected to the mixing system so that mud can be transferred and treated in any pit independently
• As much as practical, tanks to have no internal piping or obstructions. Only suction pipe, mud guns, equalisers and dump valves
will enter the tank. Suction and Discharge lines to be run from all tanks for flexibility and rapid weight and for lining up as active tanks.
• Double deck top for tanks（ except shale shaker tank I ） Or a safe walkway to eliminate piping or other obstructions on top deck.
Sufficient service gates in top deck. Piping to be kept below grating.
• Mud trough sized for 1500 GPM（Mud trough on top of tank and below double deck）
• Where possible all valves to be outside the tanks and/or above mud level. All valve operators or handles to be below the grating level.
• All tanks to have 42" handrails.
• All tank compartments to have knife dumps and bottom feed to dump header.
• All tanks to have fixed, overhead sunshade cover with mist system coving all mud system area.
• All suction valves on the mud tanks will be accessible from the surface for repairs and contain high quality sealing components that
are oil based mud compatible.
• All the motors and control units to be explosion proof type
• One mud duty room is installed on the tank.
Low pressure mud system, Butterfly Valves and Unions.
B2.1. Centrifugal Pump - Qty : 11 set
- 6" x 8"-14 centrifugal pump with 75KW Explosion proof AC motor
B2.2. Centrifugal Pump - Qty : 4 set
- 2"×3"-13 centrifugal pump with 11KW Explosion proof AC motor
- Two(2) for trip tank, Two(2) for water cooling tank.
B2.3. Mud Processing /Treatment - Qty : 35 set
• Mud Agitators :
Impellar size 1140mm, Power 18.5KW, Qty 6 pcs
Impellar size 1040mm, Power 15KW, Qty 27 pcs
Impellar size 960mm, Power 11KW, Qty 1 pc
Impellar size 500mm, Power 2.2KW, Qty 1 pcs
B2.4. Mud Tanks
- Flat Bottom Tank, with slanted internal bottom.
B.2.4.1 Shaker Tank I - Qty : 1 set
- Shaker Tank I comprising of the following pit compartments :
a) Sand trap: 100 bbls. Capacity with provision for long tapered dump
B.2.4.2 Shaker Tank II - Qty : 1 set
- Shaker Tank II comprising of the following pit compartments :
a) De-sander /Degasser tank - 200 bbl. capacity.
b) De-silter pit - 200 bbl. capacity.
B.2.4.3 Intermediate Tank - Qty : 1 set
- Intermediate Tank comprising of the following compartments :
Compartment 1- 240 bbl.
Compartment 2 - 300 bbl.
B.2.4.4 Suction Tank - Qty : 1 set
- Suction Tank - 500 bbl. Tank is partitioned in two equal size compartment.
B.2.4.5 Mixing Tank - Qty : 1 set
- Mixing Tank comprising of the following compartments:
- Mix/Premix Tank for mixing -150 bbl.
- Mix/Premix Tank for mixing -200 bbl.
- Pill/Slug Tank -100 bbl.
B.2.4.6 Mud Reserve Tank - Qty : 1 set
- Mud reserve storage tanks, each of 500 bbl. capacities.
- Each tank divided into two (2) Compartments, each of 250 bbl.
B.2.4.7 Trip Tank& Water Cooling Tank - Qty : 1 set
Trip Tank& Water cooling tank are installed on the one skid. Trip tank - 120 bbl. capacity. There are two
compartments, each compartment is 60 bbl. 20m³ Water cooling tank is used for drawworks gearbox,
rotary gearbox, etc.
B.2.5. Shale Shaker
B.2.5.1 : Flow Dividers to the 4 shale shakers and 1 combo type shale shaker with flow bypass. Flow Divider box to
be capable to handle 1500 GPM of flow. - Qty : 1 set
B.2.5.2 :
- Derrick Hyperpool / 4-Panel High "G"
- Linear motion Shale shakers powered with vibrating motors that produces High G – 8 G force and with 4 panels with top
feeding wiers . Along with API-RP-13 C complaint replacement Screens (80 to 325 mesh sizes) to be suitable for flow line
temperature up to 200° F.
- Qty : 4 sets
B.2.5.3 : Screens type – Pyramid - Qty : 1 lot
Screen Size : 80 , Qty : 20
Screen Size : 100 , Qty : 20
Screen Size : 120 , Qty : 20
Screen Size : 140 , Qty : 40
Screen Size : 170 , Qty : 40
Screen Size : 200 , Qty : 40
Screen Size : 230 , Qty : 40
Screen Size : 270 , Qty : 40
Screen Size : 325 , Qty : 20
B.2.6 Mud Cleaner - Qty : 1 set
- Hyperpool / 4-Panel High "G" Combo type Linear motion shale shaker of same model as above shakers with combination of de sander
and de silter on top . (Combo type) to be lined up as 5th shale shaker) along with replacement screens of above sizes. Desander and
Desilter will be capable of handling 1500 gpm of mud.
- Three (3)-10" Desander Cones
- Twenty (20)-4" Desilter Cones
B.2.7 High Pressure low volume wash gun and mud ditch magnet at shakers - Qty : 1 ea
B.2.8 Decanting Centrifuge - Qty : 2 sets
- Variable Frequency Drive Centrifuge
- 50 horsepower (37kw/60HZ/460V) – Main Drive
- 20 horsepower (15kw) – Back Drive
- With feed pump,10HP/460V/60HZ
B.2.9 Degasser - Qty : 1 set
- Derrick Vacu-Flo for handling 1200 GPM.
B.2.10 Mud Gas Separator - Qty : 1
- Mud Gas Separator
- “Poor Buoy” vertical mounted mud gas separator, 48” OD x 15’ high with 6” OD inlet from choke manifold, 10” OD return line
to shale shakers with mud seal of 15 ft 8” OD vent line, 6” OD drain and all necessary piping to connect to choke manifold,
shale shaker tank and flare line.
- Detail information :
Type:HMGS1200-1.0A
Vessel dia.:1200m
Working pressure: 1.0MPa
Flow capacity:300~350m³/h
liquid inlet:DN150
liquid discharge outlet:DN250
With ignition device &70m flare line.
- To be certified by third party as per ASME
B.2.11 14"Augers - Qty : 3 sets
- 14"Augers– to carry cuttings from centrifuge, shakers &Desander/ Desilter to mud cutting waste pits eliminating water-jetting.
B.2.12 Mud Hoppers
B.2.12.1 Mud Shearing / Mixing / Blending Integrated system (Lobestar from Vortex Venture) - Qty : 2 sets
- Mud Shearing / Mixing / Blending Integrated system (Lobestar from Vortex Venture ), complete, incorporating shear flow loops,
mixing hopper and blending manifold. Flow rate of 1000 GPM each, 2000GPM in total.
B.2.12.2 6" mud mixer hoppers with 6" Venturi. - Qty : 2 sets
- Treatment Capacity:(200m3/h),
- Bore of inlet:6",Bore of outlet:6";
- Inlet pressure:0.3-0.6Mpa,Outlet pressure:0.1-0.2Mpa;
- Nozzle diameter:2"(50mm);
B.2.12.3 Hopper skid - Qty : 1 set
- Hopper skid has capacity to accommodate- four (4) Hoppers,
- Mud dock for material storage.
- Use the second floor of hopper skid as mud dock.
- Mud dock for material storage with jib crane capable to load chemical bags on all Hoppers .
- Air crane, Rated load: 3t , hositing height:6m
B.2.13 Mud Silo Table - Qty : 1 set
- Suitable stand / framework for installation of Deck Silos / Hammer Bins
- An indicative drawing of the Mud silo is enclosed.
B.2.14 Cellar jet - Qty : 1 ea
- Cellar jet constructed of 6" OD pipe with 2" NPT x 3/4" orifice jet nozzle nipple installed in 90° long radius ell. 6" line runs from cellar bottom
to mud tank with outlets to shale shaker and reserve/waste pit. Fluid is supplied to jet nozzle by 2" high pressure line from stand
pipe discharge manifold.
- With one FLYGT Submersible electrical explosion proof type pump,HT454 20HP added hose
C Power Package
C.1 Generator sets : - Qty : 7 sets
Model: CAT3512B+SR4B,7sets
Engine power: CAT3512B，1101 bkW@1200 RPM
Generator sets: SR4B, 600V/60HZ, 980EKW c/w fan.
Totally 8 sets, generator houses included.
C.2 Auxilliary Generator - Qty : 1 set
Model: CAT C18
480V/60HZ, 545KW c/w fan.
C.3 Rig VFD system - Qty : 1 set
- VFD system.
- Equipped with A/C control system, motor control panel, generator control equipment and lighting panel, all located in air-conditioned
control room with suitable roof mounted AC units.
C.4 WellSite Ex-proof circuit and lighting - Qty : 1 lot
- WellSite Ex-proof circuit and lighting
- Rated Voltage:600V/110V
- Rated frequency: 60Hz;
- UL/IEC/ATEX/CNEX explosion-proof standard.
- Explosion-proof requirement:The Ex e or Ex d explosion proof is used for the drilling floor area.
- Distribution Box and Magnetic Starter Box
- Lightings(Flourescent type)
- Cables (Exane or equivalent)
- Plus and socket
- Cable tray（including grasshopper and folding cable tray）.
- Includes the cable tray from VFD to solid control area, mud pump area, drilling floor area (including the mast), and generator houses
and to other support equipment.
D Rig Instrumentation, Control and Automation
D.1 Drillers Cabin cum Dog House - Qty : 1 set
- The cabin’s walls and the console are made of 304 stainless steel. The main frame and base are made of carbon steel. The middle of the
wall insulation filling rock wool,well insulated.
- Dog house and cabin dimensions is 2750mm(W)x 7500mm（L）x 2950mm(H)with attached cabin of 2700×2750mm.
- DCC designed to allow for ergonomics,positioned above the floor level with safety windows with wiper system to allow clear view of the rig
floor. Have a good sight of mud pumps, monkey board and drawworks. The windows are provided with safety nets and security bars. The
glass shall be made from Bullet-proof glass.
- The Driller's Cabin will have typical instrumentation/ equipment as listed below:
- Equipped with driller`s integrated chair. The drawworks operation and main operation of Top drive can be realized on the driller chair
and SIMATIC HMI.
- Draw works Joystick Controls,Top Drive Control.Drilling instruments and CCTV.
- One Ex-proof emergency lights .One Ex-proof power switch box.
- Driller’s cabin equiped with two sets of HVAC (Top mounted) which refrigerating capacity about 7kW. Doghouse equiped with two window
Air Conditioner which refrigerating capacity about 5kW.
- Ex telephones. Rig alarm horns, fire extinguisher.
- All plugs and receptacles for console connection.
- All operations are controlled from the Driller's Cabin.
D.2 Closed Circuit Television system (CCTV) - Qty : 1 set
- Closed Circuit Television system (CCTV) with recording and storage capabilities for 2 wells backup data(24months),colour remote control
camera system at below the Crown block, Monkey Board, stabbing board and under sub structure(all rotating camera,all explosion-proof type),
with explosion proof monitor(one display screen with four pictures) and controls at Driller's console.
and two monitors in both rig supervisor and toolpusher cabins.
- Working temperature:-30~60℃;
- Relative humidity:0-90%RH;
- Working voltage:120V-260V,47HZ-63HZ;
- The CCTV system consists of camera unit,controller,display screen,keyboard,connecting cables.
D.3 Rig Instrumentation System - Qty : 1 set
- Electronic, Computer controlled rig instrumentation system, MD Totco- Rig Sense3.21 control systems, incorporating real-time data acquisition
for usage at rig, display and logging of all rig, pump pressure, mud flow and volume information and alarm systems.
- Instrumentation system to be equipped with both Analog and Digital displays.
- Analog display is refer to Weight Indicator,pressure gause,etc.
- Suitable for area classification Class-1-Div-1.
- The system will provide for hard copy record of daily parameters and electronic database storage and retrieval of data to common Windows
based computer systems.
- System to cover the requirements under H.2.a to H 2.c through one system.
D.3.1 The system will provide for hard copy record of daily parameters and electronic database storage and retrieval of data to
common Windows based computer systems.
D.3.2 The system will include the following measurements :
• Hook Load
• Block Position
• Block Speed
• ROP
• Drilling Torque, Top Drive and Rotary
• Rotation speed, Top Drive and Rotary
• Tong line pull
• Mud Pumps; each pump & total all pumps
• Pump speed
• Pump strokes
• Total strokes
• Standpipe pressures
• Choke Manifold pressures
• Kill Line Pressure
D.3.3 MD Totco HMI as pit level (total 23nos mud leval sensors )and flow show monitor system with alarm device complete with
the following features :
• Total pit volume and individual tank volume for all active , mixing and reserve pits.
• Trip tank volume.
• Mud pit gain or loss in bbls.
• Mud flow as percentage of total flow.
• S. P. M. and continuous strokes for each mud pumps.
• Electronic digital monitoring/hard copy printout recording system for total volume and flow line
D.3.4 Will have Alarm Systems for
• Active Pit Level
• Mud return flow rate alarms; High/Low
• Rate of Penetration; High
• Pump Pressure; High/Low
D.3.5 The rig control system will be capable of automatic control of the following :
• Block Speed while running drill pipe, casing, tubing, etc., to rated maximum load.
• Block Proximity Limits; Crown & Floor
• Top Drive/Rotary Torque
D.3.6 Penetration rate while drilling, reaming, etc., based on;
• Bit Weight
• Pump Pressure differential. and
• ROP limits
• Torque
D.3.7 Data Monitor System
- Data Display Monitors, independently configured, networked to data storage system for real time or achieved
display of all rig data, with graphical, analogue and numerical display options :
• 1 Driller's Console（HMI)
• 1 Driller's Doghouse(HMI）
• 1 Contractor's Office(Rigsens cilinet）
• 1 Operator's Area Supervisor Office（Rigsens cilinet）
• 1 Operator's Rig Site Supervisor Office（rigsense server）
• 1 Mud Lab（LCD Screen）
D.3.8 Data printer systems for hard copy data record, configurable for digital or graphical output based on time or depth.
D.3.9 Data printer/recorder system dedicated to real time, 24 hour, continuous, 8 channel, graphical hard copy recording of critical rig data including;
• Hook Load
• Rate of Penetration
• Top Drive/Rotary Speed
• Top Drive/Rotary Torque
• Total Pump Speed
• Pump Pressure
• Return Flow Rate
• Pit Level
D.4 Deadline Anchor - Qty : 1 set
- Deadline Anchor JZG72E
- Max. deadline pulling force: 720KN;
- Output Pressure 9Mpa
- Output Pressure Error: ±1.0% FS
- Suit for M/D E551 Sensor
- With the MD Totco sensator and weight indicator.
D.5 Rig Intercom & Public Address System - Qty : 1 set
- Rig Intercom & Public Address System; Stations at all Operator's Offices, Mechanic Office, Senior Toolpusher's Office, Driller's Console, Driller's dog
house Shale Shaker w/hood, Mud Tanks, VFD Cabin, Mud Logger's Cabin, End of Catwalk for Cement Unit, Mud Engineer Lab, MWD unit, monkey
board, choke panel, and two spare units.
- Explosion proof suitable for use in Hazardous areas and to withstand harsh effects of environment
- Total of 17 stations required.
- Manufacturer Gaitronics
D.6 Rig Paging System - Qty : 1 set
Rig Paging System : For recording (the recording should be at lest 30days and be shared by the contractor.) the instructions passed between Driller
and Tool Pusher or between Company Man and Tool Pusher. Explosion proof suitable for use in Hazardous areas and to withstand harsh effects
of environment.
Manufacturer : Gai-Tronics USA
E Auxiliary Rig Equipment
E.1 Hoists
E.1.1 Rig Floor Winch - Qty : 3 sets
- Hoist, 10,000 lbs, one (2) located at drill floor, one (1) located at the end of catwalk.
Specification :
- Air pressure :116psi/0.8MPa;
- Max. pulling force :10,000 lbs/5T;
- Rope capacity :120m;
- Wireline Dia. :Ø20mm（3/4")
E.1.2 Winch - Qty : 1 set
- Hoist, 20,000 lbs, located at drill floor on driller side for Drill Collars/ Heavy lifts.
Specification :
- Max. lifting capacity:100KN
- Max. rope speed:20m/min
- Rated power:30KW
- Rated air inlet pressure:0.8MPa
- Rated air consumption:24m3/min
- Rope capacity:120m
- Wireline diameter:24mm
E.1.3 Man Rider Winch - Qty : 2 sets
- Winch on rig floor, 330lbs/150 Kg capacity, Certified Man rider includes external relief valve,operating valve, and testing ports.
- All on rig floor.
- Will be fail safe system.
- Man Rider Line Pull Rating: 330 lbs. (150 kg) on 2nd layer
- Man Rider Line Speed: Variable, 0 - 98 fpm (30 m/min) on 2nd layer
- Wire Rope Storage Capacity: 505 feet (154 m) with 7/16 inch (10mm) dia. wire rope on 5 layers
- ATEX Compliance: Standard. Includes drum guard, overload protection, emergency stop, limit switch, muffler and ATEX marking.
- Testing : Standard load test to 180% SWL
- Pressure: 75 psig (5 bar) – 105 (7 bar) at the air inlet (dynamic)
- Flow: 88 cfm (2.5 m3/min)
- 1ea on Rig floor and 1ea in Subbase
E.1.4 Racking Board Winch - Qty : 1 set
- 1-Tonne Utility Air Winch for Racking Board with remote operator pendant to function.
E.2 Air Compressors
E.2.1 Air Compressors - Qty : 3 sets
- Air Compressors for 535 CFM at 145 psi/1MPa each equipped with dual controls, including pipes valve fitting and two air receiver tanks of 600 gallons.
- Discharge Capacity: 535CFM(15.15m3/min)
- Rated Discharge Pressure:145psi(1.0MPa)
- Max.Working Pressure:154psi(1.06MPa)
- Cooling Type:Air cooling
- Max.Ambient Temperature:55℃
- Max.Dischage tepemerature:55℃+8~15℃
- Motor:90kW
- Air tank):four(4) total
- Two(2) 2.5m3 in Air house,two(2) 1.5m3 under sub-base
E.2.2 Air Dryer - Qty : 1 set
- Air Dryer to suit the air supply capacity of two air compressors working and one for spare.
- Model ï¼› HD-25HTF, capacity: 27m3/min
- C/W one prepositive filter and one postpositive filter.
E.2.3 Auxiliary Air Compressors - Qty : 1 set
- Quincy QT-7.5 Air Compressor –150 psi, driven by diesel engine for cold start application.
Features :
ACFM @ 175 psig: 22.0
RPM: 990
E.3 Water, Oil and Fuel System
E.3.1 Drill water Storage tank - Qty : 5 sets
- Drill water Storage tank 500 bbl each
- Flat bottom,Top Opened
- 2 pcs of Centrifugal pump included, 600V,60HZ
E.3.2 Four compartment oil lubster for storage of oil lubricants - Qty : 1 set
E.3.3 450 bbl Diesel Fuel Tank - Qty : 1 set
- 450 bbl diesel fuel tank complete with circulating and filtration system for rig engines and two (2) 1-1/2" x 2"
transfer pumps. Double skin and level indicator .
E.3.4 450 bbl. Mud-Diesel Storage Tanks - Qty : 2 sets
- 450 bbl. mud-diesel storage tanks. 2 pcs
- Fuel storage tank with doubled walled type construction.
The storage tanks will be fitted with :
• Level indicators to know the volume of the contents in the tank.
• Air breather with flash back arrestor
• Over flow line
• Access/egress ladder
• 1set 3" x 4" mud diesel transfer pump for two mud-diesel storage tanks.
E.4 Rig Floor Tools
E.4.1 General Assembly Parts - Qty : 1 set
Air winch support, location block for generator house, guard rail, rotary table cover plate, air tank bracket, mud umbrella, etc.
E.4.2 Hydraulic Wire Cutter - Qty : 1 pc
• Max. cutting diameter :48mm;
• Max.shearing force:20T;
E.4.3 Hydraulic Jack - Qty : 2 ea
30T，50T，100T
E.4.4 Wireline Stringing Unit : Ф42 - Qty : 6 pcs
| |
| |
|
|
|
Id: WR959
 Ingersoll-Rand DM25 SP Crawler Drilling Rig - For Sale
Worldrigs ID: WR959
Description :
1985 Ingersoll-Rand DM25 SP Crawler Drill Rig
Cummins KT1150 Deck Motor 450HP, recently full rebuild
New 2 7/8” Kelly Bar 48ft
IR 750/300 PSI Compressor “Builds excellent air”
New Compressor Regulators
Hot Box
Dust Box
New A/C
New Heater in cab
Drill does not have leaks and is in good running condition
Location : USA
| |
| |
|
Id: WR1032
 Ideco E-1200 Drilling Rig - For Sale
Worldrigs ID: WR1032
Description :
Drawworks
Manufacturer : IDECO
Model : E-1200
Power : 1200-HP
Motors : (2) Toshiba 900-HP DC Traction Motors
Serial Number : N/A (Asset DW011)
Hours : 13369
Engines
Manufacturer : Caterpillar
Model : 3512DITA Diesel Engines (x3)
Power : 1321-HP each
Features : Air Start, Skid Mount Enclosures with Generators
Generator Sets
Manufacturer : KATO, WEG
Model : 1050-680361111
Capacity : 1050-KW each (x3)
Features : Unitized with Engines, Includes VFD/SCR Skid
SCR House
Configuration : 3x4
Mast
Manufacturer : IRI
Type : 127ft Telescoping Mast
Serial Number : D5501271282
Capacity : 550,000-LB Hook Load
Features : Accommodates 275-Ton Top Drive, Hydraulic Lift Cylinders,
Geronimo Line, Mast Dolly
Substructure
Manufacturer : IRI
Type : 22ft Hydraulically Telescoping Substructure
Capacity : 550,000-LB Rotary Load, 300,000-LB Simultaneous Setback
Features : Integrated Drainage System for Fluid Containment,
(2) Braden Floor Winches
Rotary
Manufacturer : IDECO
Model : 27-1/2’’ Rotary
Drive : Independently driven by (1) 800-HP DC Traction Motor
Blowout Preventer (BOP)
Configuration :
(1) 11’’ 10M Shaffer Type Double Ram BOP
(1) 11’’ 10M Shaffer Type Single Ram BOP
(1) 11’’ 5M Shaffer Type Annular
(1) KPM Koomey 6 Station Accumulator, Model T15160-3, S/N 2430, API 16E
Mud Pumps
Manufacturer : BOMCO
Model : F-1600 Triplex Mud Pumps
Pressure Rating : 5000 PSI
Motors : EMD DC Traction Motors rated at 1600-HP
Mud System
Total Active Capacity : 848 Barrels
Components :
(2) Covered 424-Barrel Tanks with Round Bottoms and Electric Agitators,
each containing (2) 5x6x75-HP Centrifugal Pumps, Remote Hopper Skid
(1) Mud Processing Skid, Hydraulically Raised, with
(3) Brandt King Cobra Shakers, Brandt DG-10 Degasser, Brandt 16 Cone Desilter
(1) Trip Tank Skid, 106-Barrel Capacity, with 2x3x25-HP Centrifugal Pump
Suction Tank, 424-Barrel Capacity, (2) 6x5x14 Centrifugal Pumps,
includes 100-Barrel Slug Tank
Intermediate Tank, 424-Barrel Total Capacity, 3 Separate Tanks
at 141-Barrels each, (2)6x5x14 Centrifugal Pumps
Top Drive
Manufacturer : Canrig
Capacity : 275-Ton AC
Serial Number : 790
Features : "ROCKIT" Capability
Hours : 21033
Overhead String
Configuration : 300-Ton Five Sheave Block with a 10 Line String Up
Driller Controls
Type : Drillers Cabin Skid
Features : Varco Electronic Driller and Block Control System,
Block Speed Controls, Joystick Controlled Drawworks Speed,
Touch Screen and Manual Control of EDRILL and SCR
Auxiliary Equipment
Automatic Catwalk : Forum, Wrangler 3500, S/N 355P0108187AC89, 22.5ft Floor
Wireline Unit : Five Star Rig with 25,000ft of .092 Wireline
Motorized Drill Line Spool
Quarters : Toolpusher and Crew Quarters, Skidded, Furnished, Satellite System
Meeting and Change House Combo Skid
Hydraulic Power Unit Skid with Centrifugal Pumps and Reservoir
Pipe and Kelly Spinner : Hydraulic (Hawk, Spinmaster, Model 550)
Fuel Tank : 12,000-Gallons, Double Wall, Skidded with Pump
**Water Tank Skid with Centrifugal Pumps
Location : USA
| |
| |
|
Id: WR581
 MD Cowan Super Single Land Rig for Sale
Worldrigs ID: WR581
General
Rig Type or Model : Super Single
Year Built/Re-built : 2009 (Delivery 2010)
Operating Capabilities
Maximum Static Hook Load (lbs) : 550,000
Maximum Setback Load (lbs) : N/A
Maximum Rotary Load (lbs) : 550,000
Maximum Top Drive Load (lbs) : 500,000
Mast (on carrier)
Make/type : IDS 72’ 550,000
Height - ft : 72
Width of base - (ft x ft) : 8’-1” x 5’-4”
Width of top - (ft x ft) : 8’-1” x 5’-4”
Static hook load - (lbs) : 550,000
API Gross Nominal Capacity - (lbs) : 550,000
With rated set-back - (lbs) : N/A
Max rated hook load for 8 lines to travelling block (lbs) : 550,000
Substructure
Make/type : IDS
Height -(ft) : Height of drillfloor : 19’-6”
Width - (ft) : 12
Static setback capacity - (lbs) : Max rated setback : N/A
Casing load capacity - (lbs) : 550,000
Rotary Capacity - (lbs) : 550,000
Drawworks
Make/type : Rig Tech RT-400BE
Rated capacity - HP : 1000
Auxiliary brake : Eaton WCB424
Crown Block
Make/type : IDS
Rated capacity - lbs : 550,000
No. of sheaves : 7
Travelling Block
Make/type : MD Cowan
Rated capacity - lbs : 550,000
No. of sheaves : Integrated 4 Sheave
Hook
Make/type : N/A
Rated capacity - lbs : N/A
Drilling Line
Size - inches : 1-1/4 6 x 19 EEIPS
Make/Type : WireCo
Dead Line Anchor
Make/type : Hercules HA-119T
Load rating - lbs : 60,000
Rotary table
Make/type : N/A
Drive: (independent or driven from drawworks) : N/A
- Motor HP (if independent)
Maximum opening - inches : 27-1/2
Top Drive
Make & Type : VentureTech XK-250
Electric or hydraulic : Hydraulic
Rated capacity - lbs : 500,000
Test/working pressure - psi : 5,000
Rated power - HP : 24,000
Maximum rotary speed (RPM) : 165
Prime Movers (on trailers)
Quantity : 3
Make : Caterpillar
Type : 3512C
Continuous output power available HP each engine : 1830
AC- Generator
Quantity : 3
Make : Kato
Type : 6P6-3300
Continuous output power available HP each generator -
Output ratings :
- kW : 1225
- Volts : 600
SCR System (on trailer)
Number of SCR bays : 4
Make : Omron
Type : Ross Hill Style
Rig Service Air System
Air Compressors :
Quantity : 2
Make : Sullivan-Palatek
Model : H/25-D
Iron Roughneck
Make/Type : Gray EOT. Floorhand
Pipe handling range (inches) : 3-1/2” to 8-5/8”
BOP Annular
Quantity : 1
Make : Cameron or Equivalent
Type : Type 90
Size (inch) : 13-5/8”
WP (PSI) : 5,000
BOP Ram Type Preventer
Quantity : 1
Make : Cameron or Equivalent
Type : U
Single/double : Double
Size (inch) : 13-5/8”
WP (PSI) : 5,000
BOP Accumulator Unit
Make : Burnsco
Reservoir capacity liter : 795
No. of stations : 6
No. of bottles/banks installed : 12
Total bottle capacity liter : 484
Bottle working pressure (psi) : 3,000
Choke Manifold (on skid)
Make : Swaco or Equivalent
Size inch : 4”
Working Pressure (psi) : 5,000
Mud Pumps (on skids)
Quantity : 2
Make : Weatherford
Model : MP13
Power rating / pump (HP) : 1,300
Mud Tanks (on skids)
Quantity :
Total capacity Active: bbls / m3 : 1,006 / 160
Total capacity Reserve/Water: bbls / m3 : 1890 / 300
Shale Shaker
Quantity : 2
Make : Derrick
Type : Flo-Line Cleaner-504
Desander
Make / type : NOV
- Quantity : 3
- Diameter : 10”
Desilter
Make / type : NOV
- Quantity : 12
- Diameter : 4”
Mud/Gas Separator (on skid)
Make/type : Triple S Construction
Height of mud seal : 10ft
Vacuum Degasser
Make : Derrick
Type : Vacu Flo-500
Camp
Main Camp POB : 82
Fly Camp POB : 5
| |
| |
|
|
|
Id: WR949
 Ingersoll-Rand TH60 Drilling Rig - For Sale
Worldrigs ID: WR949
Description :
1977 Ingersoll-Rand TH60 Drill Rig
IR 600 cfm / 250 psi Air compressor
Myers water injection pump
Carsouel
Set up for 4-1/2" drill pipe (no pipe included)
Winch
3 Hydraulic Leveling Jacks
Mounted on an International Paystar
Detroit 8V71T diesel engine
Eaton Fuller Roadranger Transmission LoLo
Location : USA
| |
| |
|
Id: WR930
 Ingersoll-Rand Range II RD20 Drilling Rig - For Sale
Worldrigs ID: WR930 Description :
2000 Ingersoll-Rand Range II RD20 Drill Rig - Serial#: 6599
Cummins QSK19 Diesel Deck Engine
IR 1250 CFM - 350 PSI HR2.5 Air Compressor (Clutch)
110,000 lbs of Pullback
Hydraulic Leveling Jacks
Mounted on a CCC (Crane Carrier Chassis) Truck
Diesel Engine
4 Axle VIN#: 1CYDEM480YT044734
Tooling Included :
1 - 12" DTH Hammer
50 - Drill Pipe (30ft x 4-1/2" x 2-7/8" IF)
Fork Wrenches, Shocks and Elevator
Newer Paint
Location : North America
| |
| |
|
Id: WR817
 500HP National 5C Workover Rig
Worldrigs ID: WR817
General information
Single Drum D500 Drawworks with 1” drill line
104’ x 250,000# Derrick with rods & tubing racking boards
Detroit Diesel Series 60, 500 HP engine
Allison M5610H Transmission with drop box
Traveling Block, Ideco DS110, slotted speed kit design, 3 sheaves, 110 ton
Foundation, steel scissor beam on 3” x 12” timbers
Disc Assist Brake, Model 37.5 mounted at the drum
Tong, Gill Model 500 with back up head
Blowout Preventer, Townsend Type 81, 7-1/16”x 5000 psi. double stack
Stripper Head, Hall style 1500 psi.
Tubing Slips, Guiberson 60 ton, air operated
Rod Elevators, 5/8” to 1”
Tubing Elevators, 2-3/8” to 2-7/8” EUE
Wash Swivel, King 53GA
Hand tools
| |
| |
|
|
|
Id: WR993
 Ingersoll Rand TH60 Drilling Rig - For Sale
Worldrigs ID: WR993
Description :
1978 Ingersoll Rand TH60 Drill Rig
IR 750 cfm / 250 psi air compressor
(3) hydraulic leveling jacks
Rod rack
Water injection pump
7 rod carousel for handling 3-1/2" drill pipe
Around 60ft - 100ft of drill pipe included (will confirm soon)
Mounted on a 1978 International Paystar 5000 Truck
Detroit 8V92 Diesel Engine
Note: Owner says they drilled 2 wells with it & went down to about 425 ft
Note: Owner says a complete service has been done, replacing all the water,
oil, and air filters, changed the oils, new windshield, new truck compressor,
replaced several tires, new cables, replaced a bunch of air ines, funk box
totally rebuilt, 2 Charlynn motors rebuilt, break out wrench cylinder rebuilt,
just to list a few things. All the head bearings were replaced as well
Included with some tooling including bushings and some subs
Location : USA
| |
| |
|
Id: WR615
 Trailer Mounted Hydraulic Lift, Super Single Rig for Sale
Worldrigs ID: WR615
General Description
Year built/Rebuilt ; 2009
Estimated Drilling Depth : 12,000 ft
Estimated Rig Move Loads : 15
Estimated Camp Move Loads : 4
Rated HP : 550
Mast
Height : 72.00 ft
Static Hook Load Capacity: 500,000 lbs
Mast Racking Capacity : N/A
Substructure
Style : Box Type
Height : 14.80 ft
Clear Height : 10.60 ft
Casing Capacity : 500,000 lbs
Maximum Setback Load (lbs.) : N/A
Drawworks
Make: Rig Tech
Model : RT400B
Power Rating : 1000 hp
Input Power : 1 ea. Caterpillar C15
Brake Type- Band or Disc : Band
Drilling Line Size : 1 1/8"
Auxillary Brake : Eaton Airflex-WCBD
Top Drive / Power Swivel
Make : Venturetech
Model : xk-250
Capacity : 250 Ton
Torque-Continuous : 22,000 ft-lb
No Swivel
No Rotary
Power Generation
Engines : 2 ea. Caterpillar C 15
Generators : 2 ea. Caterpillar SR 4
SCR / VFD / DC/DC : Mechanical Rig
Enhancements
Fork Lift : Caterpillar 930 H
Iron Roughneck : Blohm & Voss Floorhand 9GF 1002
Pipe Arm : US Oil Tools
Mud System
Mud Pumps : 2 ea Weatherford Oil Tools MP-10, 1000 hp @ 140 spm
Reserve Mud Volume : 0 bbls
Pressure Rating : 5,000 psi
Active Mud Volume : 700 bbls
Shale Shakers : 2 ea. Derrick Corporation DP
Desander : Derrick Corporation 10" x 3 Cones
Desilter : Derrick Corporation 4" x 16 Cones
Mud Cleaner : N/A
Centrifuge : N/A
Well Control
Annular : 11" 5,000 psi, Townsend
Double Ram : 11" 5,000 psi, Townsend, Type 82
Choke Manifold : MD Cowan 3 1/8" 5,000 psi
BOP Closing Unit : Nurnsco 5 Station 3,000 psi
| |
| |
|
Id: WR622
 550HP Trailer Mounted Hydraulic Lift Drilling Rig For Sale
Worldrigs ID: WR622 General Description
Year built/Rebuilt ; 2009
Estimated Drilling Depth : 12,000 ft
Estimated Rig Move Loads : 15
Estimated Camp Move Loads : 4
Rated HP : 550
Mast
Height : 72.00 ft
Static Hook Load Capacity: 500,000 lbs
Mast Racking Capacity : N/A
Substructure
Style : Box Type
Height : 14.80 ft
Clear Height : 10.60 ft
Casing Capacity : 500,000 lbs
Maximum Setback Load (lbs.) : N/A
Drawworks
Model : RT400B
Power Rating : 1000 hp
Input Power : 1 ea. Caterpillar C15
Brake Type- Band or Disc : Band
Drilling Line Size : 1 1/8"
Auxiliary Brake : Eaton Airflex-WCBD
Top Drive / Power Swivel
Make : Venturetech
Model : XK-250
Capacity : 250 Ton
Torque-Continuous : 22K ft./lbs
No Swivel
Rotary Table
Power Generation
Engines : 2 ea. Caterpillar C 15
Generators : 2 ea. Caterpillar SR 4 B
SCR / VFD / DC/DC : Mechanical Rig
Enhancements
Fork Lift : Caterpillar 930 H
Iron Roughneck : Blohm & Voss Florrhand 9GF 1002
Pipe Arm : US Oil Tools
Mud System
Mud Pumps : 2 ea Hong Hua HHF-1000, 1000 hp @ 140 spm
Reserve Mud Volume : 0 bbls
Pressure Rating : 5,000 psi
Active Mud Volume : 700 bbls
Shale Shakers : 2 ea. Derrick Corporation FLC 504
Desander : Derrick Corporation 10" x 3 Cones
Desilter : Derrick Corporation 4" x 16 Cones
Mud Cleaner : N/A
Centrifuge : N/A
Well Control
Annular : 11" 5,000 psi, Shaffer, Spherical
Double Ram : 11" 5,000 psi, Shaffer, SLWS
Choke Manifold : MD Cowan Inc., 3 1/8" 5,000 psi
BOP Closing Unit : Bear Equipment Company, 5 Station 3,000 psi
| |
| |
|
|
|
Id: WR912
 Simco 2800 Drilling Rig - For Sale
Worldrigs ID: WR912
Description :
1987 SIMCO 2800 Drill Rig
Mounted on 1988 Ford truck
Short stroke mast (6ft stroke)
Top head looks to be 3900 ft. lbs. of torque
Powered by side mount PTO running off the Trucks Transmission & Truck Engine
Truck Engine needs replaced
Location : USA
| |
| |
|
Id: WR624
 Trailer Mounted Rack & Pinion, Super Single Rig for Sale
Worldrigs ID: WR624
General Description
Estimated Drilling Depth : 10,000 ft
Estimated Rig Move Loads : 22
Estimated Camp Move Loads : 4
Rated HP : 850
Mast
Height : 80.00 ft
Static Hook Load Capacity: 300,000 lbs
Mast Racking Capacity : N/A
Substructure
Style : Parallelogram
Height : 14.00 ft
Clear Height : 11.00 ft
Casing Capacity : 300,000 lbs
Maximum Setback Load (lbs.) : 300,000
No Drawworks
Top Drive / Power Swivel
Make : Tesco
Model : 250 HMI 475
Capacity : 250 Ton
Torque - Continuous : 21,000 ft-lb @ 56 rpm
No Swivel
Rotary Table
Power Generation
Engines : 2 ea. Detroit Diesel Series 60
Generators : 2 ea. Stamford Power System HCI534DIL
SCR / VFD / DC/DC : Rack & Pinion Rig
Enhancements
Iron Roughneck : Canrig Drilling Technology TM80-110-12-X-WX/PCS
Mud System
Mud Pumps : 2 ea Hong Hua HHF-1000
Power Rating : 1000 hp @ 140 spm
Reserve Mud Volume : 0 bbls
Pressure Rating : 5,000 psi
Active Mud Volume : 700 bbls
Shale Shakers : 2 ea. Derrick Corporation FLC 504
Desander : Derrick Corporation 10" x 3 Cones
Desilter : Derrick Corporation 4" x 16 Cones
Mud Cleaner : N/A
Centrifuge : N/A
Well Control
Annular : 11" 5,000 psi, Townsend, TM19012-11-508
Double Ram : 11" 5,000 psi, Townsend
Choke Manifold : Quality Valve and Machine Works Inc, 3 1/8" 5,000 psi
BOP Closing Unit : Burnsco, 6 Station 3,000 psi
| |
| |
|
Id: WR631
 Trailer Mounted Rack & Pinion, Super Single Rig
Worldrigs ID: WR631
General Description
Estimated Drilling Depth : 10,000 ft
Estimated Rig Move Loads : 22
Estimated Camp Move Loads : 4
Rated HP : 850
Mast
Height : 80.00 ft
Static Hook Load Capacity: 300,000 lbs
Mast Racking Capacity : N/A
Substructure
Style : Parallelogram
Height : 15.00 ft
Clear Height : 13.00 ft
Casing Capacity : 300,000 lbs
Maximum Setback Load (lbs.) : 300,000
No Drawworks
Top Drive / Power Swivel
Make : Tesco
Model : 250 HMI 475
Capacity : 250 Ton
Torque - Continuous : 21,000 ft-lb @ 56 rpm
No Swivel
No Rotary Table
Power Generation
Engines : 2 ea. Detroit Diesel Series 6063HV35
Generators : 2 ea. Stamford Power System HCI534D
SCR / VFD / DC/DC : Rack & Pinion Rig
Enhancements
Iron Roughneck : Canrig Drilling Technology TM80-110-12-W/PCS
Power Slip Frame : TTS Sense 83415-04
Mud System
Mud Pumps : 1 ea Hong Hua HHF-1000
Power Rating : 1000 hp @ 140 spm
Reserve Mud Volume : 0 bbls
Pressure Rating : 5,000 psi
Active Mud Volume : 700 bbls
Shale Shakers : 2 ea. Derrick Corporation FLC 504
Desander : Derrick Corporation 10" x 3 cones
Desilter : American Craftman 4" x 16 cones
Mud Cleaner : N/A
Centrifuge : N/A
Well Control
Annular : 11" 5,000 psi, Townsend, Type 90
Choke Manifold : Quality Valve & Machine Works Inc, 3 1/8" 5,000 psi
BOP Closing Unit : Burnsco Bison, 6 Station 3,000 psi
| |
| |
|
|
|
Id: WR1053
 Schramm T64HB Drilling Rig - For Sale
Worldrigs ID: WR1053
Description :
Schramm T64HB Drill Rig (Retrofitted in the early 1990s)
LeROI 600 CFM /350 PSI twin screw air compressor & Cooler
Detroit 8V71 NA Deck Engine (newer coolant pump) & Cooler
Mounted on 1978 GMC Truck
10 speed transmission
Includes a Newer Bean Water Injection Pump in a box (needs to be installed)
Main hydraulic pump (rebuilt with less than 10 hours)
Detroit 6V53 NA Diesel Engine
Hydraulic Leveling Jacks
Also piped for mud drilling & no tooling (cost extra)
Note: Rotation gearbox needs the pinion gear sockets remachined.
Top head needs to be rebuilt and motors replaced. No hammer lubricator.
Has Clean Title.
Location : USA
| |
| |
|
Id: WR962
 Sullivan TCD918E Drilling Rig - For Sale
Worldrigs ID: WR962
Description :
Sullivan TCD918E Drill Rig
Assembled by Furukawa, with Mitsutoyo Hydraulic Hammer
Year of manufacturer estimated around 1991
Diesel engine on deck
Is Hydraulic Drill With Blow Air (estimated approximately 150 CFM / 100 PSI)
Extendable boom, Takes maximum length 12 ft. drill rods, Drills 2.5 - 3.5" Holes
Location : USA
| |
| |
|
Id: WR1009
 Driltech D35K Drilling Rig - For Sale
Worldrigs ID: WR1009
Description :
1991 Driltech D35K Drill Rig
850 CFM / 350 PSI Air Compressor
Caterpillar 3406 diesel deck engine (has issues as machine has been parked for 5
years)
35,000 lbs of pullback
22" table opening
Included 23 pieces of 20ft x 4-1/2" OD drill pipe.
Mounted on a Ford L8000 truck
diesel engine
Location : Western Europe
| |
| |
|
|
|
Id: WR1020
 Drilling Rig for Sale-1.webp "Derex 1340-14 DR (Dual Rotary) Drilling Rig - For Sale") Derex 1340-14 DR (Dual Rotary) Drilling Rig - For Sale
Worldrigs ID: WR1020
Description :
Derex 1340-14 DR (Dual Rotary) Drill Rig
Truck
Peterbilt 567
Paccar 11 Litre
Allison 6 speed automatic
Air ride
Transfer Case
Namco (oilfield quality)
Safe Shift
Hydraulic System
Bosch Rexroth plus gear pump
Top Head
Variable torque and RPM with 2” thru-hole
0-125 rpm @ 3,500-lbf
Lower drive
Variable torque and RPM with 10” thru-hole
0-23 rpm @ 20,000-lbf
Diverter
Simple seal design with 4” NPT discharge
to control cuttings.
Derrick & Feed System
13ft top head stroke (handles 10ft x 3" OD drill pipe)
40,000-lbs pullback
20,000-lbs pulldown
100 FPM
Derrick slide/ dump
4ft Derrick slide for angles up to 45°
Main Winch
Manual jib
2,500 lb.
Remote on helpers side for winch
Control Panel
Straight hydraulic controls (no electrics to fail)
Marine grade electric switches (for lights)
Murphy engine monitor display
Twin platforms
Leveling Jacks
Four 36” stroke independently controlled
Night Lights
6 LED night lights
Toolboxes
30”x 18” x 18”
Overall Dimensions
Length: 24ft 11”
Width: 8ft 6”
Derrick up height: 24ft 6” – 28ft 6” with Derrick slide
Derrick down height: 11ft
Water Injection
9 gpm FMC injection pump
Gross Weight
34,000lbs - 36,000lbs
Casing
Diameter 4", 5" & 6" (with 8" & 10" option for surface casing)
Pre-Order Drill from EWDAdditional Options
4 – 6 Month Leadtime from Date Ordered
Sand Line Winch
1,500ft sand line
Mud Pump
3x2x13 centrifugal 300 gpm/300 psi
Centerline piston 150 gpm/600 psi
Air Compressor Options
Vanair / Sullair 600cfm / 250psi @ 1,800rpm
Vanair / Sullair 733cfm / 150psi @ 2,200 rpm
Line Oiler
Many oilers available
Water InjectionDrill Pipe Packages
18 gpm FMC injection pump
Wire Feeder and Box
Hydraulic or Gas Welders
Location : USA
| |
| |
|
Id: WR868
.jpg "450 t Hydraulic Land Drilling Rig for Sale") 450 t Hydraulic Land Drilling Rig for Sale
Worldrigs ID: WR868
Specifications
Mast
Type : Twin profile
Base : 8.9 m
Total Rig Height : 52 m max
Hoisiting Capacity : 450 mt
Substructure
Type : Box on Box
Height : 8.9 m
Casing Load : 450 mt
Set Back Load : Unlimited
Pipe Handling : Automated
Hoisting System
Type : Hydro Cylinders
Power : 1600 kW
Velocity :0.7 m.s-1
Tope Drive
Type : Hydraulic
Capacity : 450 mt
Torque : 40 k.N.m @ 150 rpm
Max Torq : 62 KNm @ 80 rpm
Max Speed : 220 rpm
Rotary Table
Table Opening : 37" 1/2
Static Load : 450 mt
BOP Equipment
Diverter : 29'' 1/2 - 500 psi
Mud Cross / Ball Valve : 29 1/2'' By 12 '' 900#
BOP : 20'' 3/4 3000 psi
Annular : 3000 psi ,
Double FLG : Ram 5'' 1/2 / 5'' / 13 5/8 /Blind ram
BOP : 13" 5/8 - 10 000 psi
Annular : 5000 psi
Double/Single : Ram 5'' / 5 1/2 '' / VBR 3 1/2 X 5 1/2, BSR / Ram 9 5/8'' / 7''
Manifold : 3'' x 10 000 psi
Chokes : 2 Hydro
Control Unit : 1536 l - 330 bar
Power Group
Electrical Transformers : 20 000 V - 50 Hz
Power Unit : To connect generators and or transformers (optionnal)
Transformers : 2x 3 150 kVA
Engine/Generator Type : MTU / LeroySomer
Generator Rating : 4x 1850 kVA
Hydraulic Power Unit
Electrical Motor : 4 500 Kw / 533 l/mn
Hydraulic Tank : 10000 I
Mud Pump
Type Triplex : Shäfer & Urbach
Power Rating : 3x 1600 HP
Standpipe Pressure : 7 500 psi
Liner Size : 4.5'' to 8''
Shale Shaker
BRANDT Type Cobra : 4
Mud Tank
Capacity : 360 m3
Hopper : 2
Drill Pipe
DP -
5'' 25,5# 4 1/2 if
5 1/2 '' 24.7# 5 1/2 fh
3 1/2'' 15,50# 3 1/2 if
BHA
DC/HWDP -
DC 9 1/2
DC 8 1/4
DC 6 1/2
DC 4 3/4
HWDP 5'' 50,61#
HWDP 5 1/2 '' 51,37#
HWDP 3 1/2 '' 26#
Additional Spec
Skidding equipment
Iron Roughneck
Automated pipe racks
Soundproof rig floor, generators ans pumps
Reduced footprint
CE, ATEX, and API compliant
Safety equipment
| |
| |
|
Id: WR961
 Sandvik Titan 600 Rock Dilling Rig for Sale
Worldrigs ID: WR961
Description :
2006 Sandvik Titan 600 Rock Dill
Self-Contained DTH Blast Hole Drill Rig
Track Mounted on 17" TBG
CAT C-15 Diesel Engine
Direct Coupled GHH 1000 CFM / 350 PSI High Pressure Air Compressor
(4) 20 ft Drill Pipe
Auto Carousel
Shock Sub
Auto Breakout Wrenches & Greaser
Water Injection with Tank
Dry type dust collector with pre-cleaner
Lubricator
ROPS/FOPS cab with heater and AC
Rear TV Camera with in-cab monitor
Night Lights
Good Appearance
11,600 Hours on engine
7596 Hours drilling time
Location : USA
| |
| |
|
|
|
Id: WR1037
 Atlas Copco L830 Crawler Drilling Rig - For Sale
Worldrigs ID: WR1037
Description :
2008 Atlas Copco Roc L8-30 Crawler Drill Rig
S/N: AVO08A1240
Set up for 4” drill pipe
4.5" - 8" DTH Class
CAT C15 Diesel Engine - Rebuilt on 3-21-20 at 15,132 hours
Current frame hours 17,863 Rotary head hours 8,987
High Pressure 995 CFM / 435 PSI Air Compressor - Rebuilt on 5-15-2017
Oil Cooler pack replaced on 10-31-2017
Break Out Table
Dust Collector
Cable Feed System
Aluminum Profile Guide shell
17,000+ Hour Machine
Location : USA
| |
| |
|
Id: WR982
 Driltech T25K2W Drilling Rig - For Sale
Worldrigs ID: WR982
Description :
1990 Driltech T25K2W Drill Rig
GHH 900 cfm / 350 psi Air Compressor
CAT 3406 Diesel Deck Engine (Rebuilt in 2018)
4 Piston Water Injection Pump
Includes basic tooling
Includes 800ft 4-1/2” X 20ft X 3-1/2 API REG Thread
New Feed Chains around 2017
Mounted on a Ford L8000 Truck
Ford 7.8 Diesel Engine
Location : USA
| |
| |
|
Id: WR920
 National 1320 2000 HP Drilling Rig - For Sale
Worldrigs ID: WR920 Description :
General Aspects
Brand : Pyramid
Capacity : 2,000HP.
Lines # : 12 lines
Structure Maximum Capacity : 1,000,000 lbs.(454 ton ).
Drilling Cable Range : 11/2".
Mast
Brand : Pyramid
Serial # : M-350455.
Capacity : 1,000,000 lbs. (454 ton ).
Crown
Brand : Pyramid
Model : PA-7/60.
Serial # : # of : 1DBC027.
Pulleys : 6 pulleys (1 fast), 60" x 1 1/2"
Capacity : 1,000,000 lbs. (454 ton ).
Drilling Cable (12 Lines)
Size : 1 1/2"
Description : Cable composed of 6 strands and 1 steel core (6x9),BOA type.
Rotarys Hose
Brand : Gates
DI : 3"
Working Pressure : 5,000psi
Testing Pressure : 10,000psi
Top Drive
Brand : Varco
Model : TDS11 500 TON.
Serial # : 230
Capacity : 500 ton.
Top Drives Control Room
Brand : National Oilwell Varco
Model : TDS11
Serial # : 30178435-2A150
Dead Line Anchor
Brand : National
Serial # : 649985
Stand Pipe
DI : 4.5"
Working Pressure : 5,000psi.
Sub-structure
Brand : Pyramid
Serial # : 5456S344
Draw-works
Brand : National
Model : 1320 - DE
Power : 2.000HP
Drilling Cable : 1 1/2"
Generators
Generator # 1 : 8
Generator # 2 : 9
Generator # 3 : 10
Generator # 4 : 11
Control and Power Room
Compressors
Compressor # 1 : 12
Compressor # 2 : 12
Air Dryer : 12
Air Tank #1 : 13
Air Tank # 2 : 13
Well Control Equipment
Double BOP : 13
Single BOP : 14
Annular BOP : 14
Strangulation Multiple : 14
Degasser : 15
Mud Pumps
Mud Pump # 1 : 15
Mud Pump # 2 : 16
Solids Control Equipment
Shale Shakers : 17
Desilter : 17
Tanks
Fuel Tank : 18
Water Tank : 18
Mud Tanks : 20
Staffs House : 27
Tools House : 27
Drilling Pipe : 28
Drillers Console : 28
Indicators and Pressure Gauges Console : 28
Gas/Mud Separator and Auxiliary Pit : 29
Connections Extension : 30
Burned Oil Tank : 30
Transformer : 30
Ramp, Stairs and Links Manifold : 31
Mixing System : 31
Mixing Tank : 31
Traveling Pulley and Hook : 34
Rotary Table : 34
Preventers Control Unit (KOOMEY) : 34
Links and Valves Container : 35
Pneumatic Draw-works : 35
12 Wood Boxes with Diverse Tools : 35
Drillers House with Preventers Control Unit Remote Control : 36
More details are available upon request.
| |
| |
|
|
|
Id: 9000-400
 National 1320 - 2000 hp SCR with Top Drive - Drilling Rig for Sale
Worldrigs ID: WR164 Description
National 1320 with Top Drive Drilling Rig
2000 HP SCR
Mast & Sub :
Lee C. Moore, 142’ High Cantilever Type Mast, S/N: T3851 with Cantilever
Substructure, 36’W X 25’H X 75’L, 1,000,000 LBS Gross Nominal Capacity with 12 lines.
Setback capacity 500,000 lbs. and 800,000 lbs. drill pipe capacity, complete with
Racking Board
Platform. Drillers and Off-Drillers Side Top Dog, Catwalk with (18) 18” High Pipe Racks
Draw works :
National 1320 UE, 2,000 HP, 1-3/8” Lebus Grooved Drum Draw Works with
(2) GE-752, 1,000 HP DC Traction Motors, complete with National Make-up and Break-out
Catheads, Over-running clutch, air drillers console and Baylor Elmagco Model 7838 Electric
Brake, S/N: 7340.
Rotary :
National C-275 27-1/2” Rotary Table with Independent Drive, with (1) GE-752,
1,000 HP DC Traction Motors, complete with emergency mechanical independent drive.
Hook & Block : Oilworks A-500, 500 Ton Traveling Block with (6) 60” Sheaves, 1-3/8” Line
Swivel : National Model P500, 500 TON
Top Drive : Varco TDS-9S Top Drive System with Omron Variable Frequency Drive House
Triplex Mud Pumps :
(1) National Model 10 P130, 1,300 HP Triplex Mud Pumps, with (2)
GE-752, 1,000 HP DC Traction Motors, (1) Hydril Model K-20-5000 Pulsation Dampener and
(1) 6 x 5, 11” Impeller, 1,200 rpm 30 HP centrifugal charge pump and (1) American Block K-
1300, 1,300 HP Triplex Mud Pumps, with (2) GE-752, 1,000 HP DC Traction Motors, (1) Hydril
Model K-20-5000 Pulsation Dampener and (1) 6 x 5, 11” Impeller, 1,200 rpm 30 HP centrifugal
charge pump
Generators Diesel / AC :
(3) Caterpillar 3512C, 1,476 BHP (1101 BKW) @ 1200 RPM,
2006 EPA/CARB Non-Road Mobile Tier 2 Emission & IMO certified, each with
KATO 6P6-3300 Generator, Rated: 1365 EKW, 1950 KVA, 0.7 PF, 600 Volt,
3 Phase, GT #3681H MB Radiator, Silencer MSA-1 Muffler with Spark Arrest,
(2) Sullivan Palatek Model 30DG 30HP Electric Air Compressors, radiators,
horizontal receiver tank, and (1) LEROI Model 770 cold start compressor,
diesel powered.
SCR House :
ROSS HILL, Model 1650, S/N: Job 5246 with (4) bays, 1800 AMP Capacity,
750 Volts DC, with AC Buss, including (1) General Electric 770 Line Motor Control Center,
Model 434X162003, 480 Volts, 3 Phase, 60 HZ., mounted in a 10’H x 10’W x 30’L
Temperature Controlled House.
Fuel Tank :
21,000 Gallon Capacity Fuel Tank with 5’L Skid extension, (2) ROPER 3611,
1”, 3 HP Fuel Transfer Pumps and (1) ALFA LAVAL Separator
Model MAB-1039-24-60, 1 HP
Water Tanks :
(1) 575 bbl. Water Tank, and (1) 450 bbl. Water Tank with 6’L Skid
extension with (2) 4 x 3, 30 HP Centrifugal Pumps
Mud Shaker Tank :
500 bbl. Flat Bottom, (2) Compartment Tank, Internal Plumbing, Mud
Jets, and 10’L covered Porch with (2) 6 x 5, 75 HP Centrifugal Pumps
Mud Trip Tank :
142 bbl. Flat Bottom, (1) Compartment Tank, Internal Plumbing, Mud Jets,
and 8’L covered Porch with (2) 4 x 3, 20 HP Centrifugal Pumps
Mud Intermediate Tank :
613 bbl., Flat Bottom, (3) Compartment Tank, Internal
Plumbing, Mud Jets, and (3) 7.5 HP Mud Agitators
Mud Suction Tank :
500 bbl., Flat Bottom, (3) Compartment Tank, Internal Plumbing,
Mud Jets, 10’L covered Porch with (2) 6 x 5, 100 HP Centrifugal Pumps, and
(3) 7.5 HP Mud Agitators
Desilter / Desander / Shaker :
(2) Brandt COBRA Linear Shale Shakers, Brandt
Desander with (2) 12” Cones, and Brandt Desilter with (16) 4” Cones
Degasser :
5’ Dia. x 20’H Mud/Gas Degasser with 10” Fill and Return Lines, (2) 4” Choke
Manifold Flow Lines and 10” Vent Line.
Blow Out Prevention Equipment :
Closing Unit: National Model BD 5762, 7-Station, 120 Gallon Capacity
Annular Preventer :
Cameron Type D, 13-5/8” X 5,000 psi Hydraulic Annular
Preventer
RAM Preventers :
Cameron Type U, 13-5/8” x 10,000 psi Double Ram Preventer, and
Cameron Type U, 13-5/8” x 10,000 psi Single Ram Preventer, 13-5/8”
Drilling Spool with 41/16” outlets
Choke Manifold :
Cameron 4-1/16” X 10,000 PSI with (8) 4-1/16”X 10,000 PSI Gate
Valves, (1) 4-1/16” X 10,000 psi CIW Positive Choke Valves and Surge
Chamber mounted on an adjustable height skid.
Auxiliary Equipment :
A) (10) 8” Slick Drill Collars
B) (16) 6-3/4” O.D. x 2-1/4” I.D Slick Drill Collars
C) 570 joints, 5” S-135, 19.50 Lb. Dill Pipe with Hard Band
D) Rig Floor Wind Walls
E) Mud House
F) Tool House
G) (2) Parts Houses
H) Change House
I) Junk Box
J) Lubester, Skidded
K) (2) Ingersoll-Rand Model K6U Air Hoists
L) Inter-American Model 1600 Wire Line Unit with 15,000’ wire
M) Electrical Suitcases
N) Steel Framed Rig Mats
O) Rig Manager Quarter
P) 12 Person Crew Quarter
| |
| |
|
Id: WR906
 Ingersoll-Rand ECM 370 Crawler Drilling Rig - For Sale
Worldrigs ID: WR906
Description :
Ingersoll-Rand ECM370 Crawler Drill Rig
Vertical
Hydraulic rock drill
VL140HR drifter
Cummins 8CT 8.3T 215HP engine
2-1/2" - 4" hole
Good undercarriage
S/N: R9546
Location : USA
| |
| |
|
Id: WR711
 2000HP VFD Land Drilling Rig for Sale
Worldrigs ID: WR711
General
Year Revamp / Certification : Q3-2018 (Built 2018)
Rated Drilling Depth
5 in. Drill Pipe : 18,000 ft (5,486 m)
4-1/2 in.Drill Pipe : 23,000 ft (7,010 m)
Mast
Make : Henan
Height : 149 ft (45.5m)
Max. Hookload : 1 million lbs
Racking Capacity : 5 in. drill pipe – 18,000 ft. (5,486 m)
Drawworks
Make : JC70DB
Rated Input : 1,470 kW (2,000 HP)
Input Power : Two (2) motors, each rated 1,000hp (746 kW)
Drilling Line : 1-1/2 in. (38.0mm)
Traveling Equipment
Traveling Block : YC 450 traveling block, to API 8A
Max. Load : 1 million lbs
Swivel : SL450 swivel in acc. to API 8A
Max. Load : 1 million lbs
Substructure
Make, Type : DZ450/10.5-S, to API 4F, swing up style Clear Drilling floor height: 10.5 m (34.5ft).
Rated setback load : 2,200 kN (494,500lbf)
Rotary Equipment
Top Drive : DQ70 BSC
Input Power : 1,100 hp (820 kW)
Rotary Table : ZP-375 in accordance to API 7K
Input Power : 720KW/AC Motor
Static Load Rating : 1.0 million lbs
BOP System
Annular Preventer : RongSheng
- One (1) 29 1/2” - 500 psi
- One (1) 20 ¾”- 3000 psi
- One (1) 13 5/8” 5000 psi
Ram Preventers : RongSheng
- One (1) 20 ¾” – 3000 psi double ram
- One (1) 13 5/8” 10000 psi single ram
- One (1) 13 5/8” 10000 psi double ram
Gensets
Engines : Five (5)
4 for Mitsubishi generators and 1 for caterpillar emergency generator package.
Generators
- Four (4) Mitsubishi MOG generators, 1.040 kW(1.600 kVA) and 1.500 RPM each
- One (1) Caterpillar emergency generator, continuous power : 320E kW 1.500 RPM
Power Distribution
Siemens VFD control cubicle,600V/400V transformer.
400VAC distribution system.
MCC system, PLC system
Mud Pumps
Pumps : Three (3) ZYF-1600 Mud triplex pumps; driven by 2 VF AC motors
Horse Power : 1,600 HP (1,180 kW
Mud Handling/Solids Control
Active Mud System : 2,230 bbls (355 m3)
Shale Shakers : Four (4) sets Derrick Model FLC 503
7G shaker process rate 560 gpm.
Degasser
HZCQ240 type; 1,000 gpm
| |
| |
|
|
|
Id: WR585
 1981 Built Fast Desert Moving Rig for sale
Worldrigs ID: WR585
General
Rig Type or Model : Fast Desert Moving Rig
Built/Re-Built :
1981 / upgraded in 2006 / Cat IV 2016,
Assembled with new and recertified equipment April 2016
Operating Capabilities
Maximum Static Hook Load (lbs) : 750,000
Maximum Setback Load (lbs) : 500,000
Maximum Rotary Load (lbs) : 800,000
Mast
Make/type : Union Industrially & Enterprise / K Style Single Structure
Height - ft : 147 ft Drillfloor to Water Table
Width of base - (ft x ft) : 30 x 8
Width of top - (ft x ft) : 6.5 x 6.5
Static hook load - (lbs) : 800,000
With rated set-back - (lbs) : 500,000
Max rated hook load for 12 lines to travelling block (lbs) : 750,000
Substructure (Desert Big Wheel Package)
Make/type : UIE
Height -(ft) : Height of drillfloor : 30
Width - (ft) : 43
Static setback capacity - (lbs) : Max rated setback : 500,000
Rotary Capacity - (lbs) : 1,300,000
Drawworks
Make/type : National UE110
Rated capacity - HP : 1500
Input power continuous - HP : GE752 DC Motors 2 (750HP each)
Auxiliary brake : Elmagco (Eddy Current)
Crown Block
Make/type : UIE
Rated capacity - lbs : 800,000
No. of sheaves : 6 + 1 Fast Line x 50"
Travelling Block
Make/type : Gardner Denver
Rated capacity - lbs : 800,000
No. of sheaves : 6 x 50"
Hook
Make/type : National H500
Rated capacity - lbs : 1,000,000
Drilling Line
Size - inches : 1 3/8”. 6x9 EEIP,RRL/IWRC.
Make/Type : 6x9 EEIP,RRL/IWRC
Dead Line Anchor
Make/type : National EB
Load rating - lbs : 100,000
Rotary table
Make/type : National Model C-375
Drive : (independent or driven from drawworks) : GE 752
- Motor HP (if independent) : 500
Maximum opening - inches : 37.5”
Top Drive
Make & Type : Global Drilling Support / GDM 500
Electric or hydraulic : Electric
Rated capacity - lbs : 1,000,000
Test/working pressure - psi : 7500 / 5000
Rated power - HP : 800 HP
- continuous torque : 45000
- intermittent torque : 75000
Maximum rotary speed (RPM) : 250
- low gear : 40
- high gear : 200
Make-up / Break-out torque - ft-lbs : 80,000
Prime Movers (Skids)
Quantity : 4
Make : Caterpillar
Type : 3512C
Continuous output power available HP each engine : 1476
AC- Generator
Quantity : 4
Make : Caterpillar
Type : SR4B
Continuous output power available HP each generator : 1401 Electric HP
Output ratings :
- kVa : 1492 kVa
- kW : 1045 kW
- Volts : 600 V
SCR System (Trailer)
Number of SCR bays : 4
Make : Rig Hill
Rig Service Air System
Air Compressors :
Quantity : 2
Make : Sullair
Model : 4509 P AC
Emergency Power
Quantity : 1
Make : Caterpillar
Model : C-15
Iron Roughneck
Make/Type : WR80 Wrangler Roughneck
Pipe handling range (inches) : 2-7/8” – 10”
Capacity : 80,000 Ft-lbs
BOP Annular
Quantity : 1
Make : Axon
Type : Type 52
Size (inch) : 13-5/8 5K
WP (PSI) : 5000 PSI
BOP Ram Type Preventer
Quantity : 1
Make : Axon
Type : Ram BOP Type50, Single
Single/double : Single
Size (inch) : 13 5/8"
WP (PSI) : 5000
BOP Ram Type Preventer
Quantity : 1
Make : Axon
Type : Ram BOP Type 50, Double
Single/double : Double
Size (inch) : 13 5/8"
WP (PSI) : 5000
BOP Accumulator Unit
Make : Top Oilfield
Reservoir capacity liter (gal) : 534
No. of stations : 8
No. of bottles/banks installed : 24
Total bottle capacity liter (gal) : 360
Bottle working pressure (psi) : 3000
Choke Manifold
Make : Woodgroup
Size inch : 3-1/16"
Working Pressure (psi) : 10,000
Mud Pumps (Skids)
Quantity : 2
Make : National
Model : 12-P-160
Power rating / pump (HP) : 1600
Mud pump driven by motors : no./type : 2Nos/DC Electrical
Continuous power rating of each motor : HP : 800Hp
Mud Tanks (Trailers)
Quantity : 3
Total capacity: bbls / m3 : 1720 BBL / 203.5 M³
Number of compartments : 9
Description/Capacity No. 1: bbl : Sand Trap - 170 BBL / 27.03 M³
Description/Capacity No. 2: bbl : Settling 50 BBL / 7.95 M³
Description/Capacity No. 3: bbl : Degasser 225 BBL / 35.77 M³
Description/Capacity No. 4: bbl : Desander 150 BBL / 23.84 M³
Description/Capacity No. 5: bbl : Desilter 150 BBL / 23.84 M³
Description/Capacity No. 6: bbl : Suction -1 , 115 BBL / 18.28 M³
Description/Capacity No. 7: bbl : Suction -2 , 210 BBL / 33.39 M³
Description/Capacity No. 8: bbl : Suction -2 / Mixing , 210 BBL / 33.39 M³
Description/Capacity No. Reserve: bbl Reserve 440 BBL / 69.95 M³
Shale Shaker
Quantity : 2
Make : NOV
Type : King Cobra Venom
Desander
Make / type : Brandt / SRS-2
Cones :
- Quantity : 2
- Type : Hydro Cyclone
- Diameter : 12"
Desilter
Make / type : Brandt / SE-16
Cones :
- Quantity : 16
- Type : Urethane Hydrocyclone
- Diameter : 4"
Mud/Gas Separator
Make/type : Velath / Closed Bottom
Height of mud seal : 140"
Vacuum Degasser
Make : MISWACO
Type : Horizontal
Maximum capacity : 1000 GPM
| |
| |
|
Id: WR1012
 Chicago Pneumatic 670 Drilling Rig - For Sale
Worldrigs ID: WR1012 Description :
1976 Chicago Pneumatic 670 Drill Rig
CAT 3406 Diesel Deck Engine
800 cfm / 200 psi Screw type Air Compressor
Mounted on a 1976 GMC 7500 Truck
Detroit V6 Diesel Engine
Note: Tower is Broken & Jack Cylinders Need Rebuilt
Location : USA
| |
| |
|
Id: WR579
 Schramm Rotadrill TDX 750hp for sale
Worldrigs ID: WR579
General
Rig Type or Model : Schramm Rotadrill TDX
Year Built/Re-built : 2008
Operating Capabilities
Maximum Static Hook Load (lbs) : 200,000
Maximum Setback Load (lbs) : N/A
Maximum Rotary Load (lbs) : 200,000
Maximum Top Drive Load (lbs) : 200,000
Mast (on carrier)
Make/type : Schramm Telecopic
Height - ft : 52’ 10”
Static hook load - (lbs) : 200,000
API Gross Nominal Capacity - (lbs) : 200,000
With rated set-back - (lbs) : N/A
Max rated hook load (lbs) : 200,000
Substructure
Make/type : Schramm
Height -(ft) : Height of drillfloor : 13’ (adjustable)
Static setback capacity - (lbs) : Max rated setback : N/A
Casing load capacity - (lbs) : 200,000
Rotary Capacity - (lbs) : 200,000
Drawworks
Make/type : N/A. Schramm Hydraulic
Rated capacity - HP : 750
Top Drive
Make & Type : Schramm Top Head
Electric or hydraulic : Hydraulic
Rated capacity - lbs : 200,000
Test/working pressure - psi : 3,000
Maximum rotary speed (RPM) : 0-90rpm @ 17,750 ft-lb and 0-180prm @ 7,670 ft-lb
Prime Movers
Quantity : 1
Make : Detroit
Type : DDC 12V-2000
AC- Generator
Quantity : 2
Make : Cummins
Type : OSK23 G7
Continuous output power available HP each generator :
Output ratings :
- kW : 725
- Volts : 480
Rig Service Air System
Air Compressors :
Quantity : 1
Make : Curtis
Model : R/530FA/EBSA-21
BOP Annular
Quantity : 1
Make : Shaffer
Size (inch) : 11”
WP (PSI) : 5,000
BOP Ram Type Preventer
Quantity : 1
Make : Shaffer
Single/double : Double
Size (inch) : 11”
WP (PSI) : 5,000
BOP Accumulator Unit
Make : CAD
Reservoir capacity gal : 210
No. of bottles/banks installed : 12 x 11 gal
Bottle working pressure (psi) : 3,000
Choke Manifold
Make : MCM
Working Pressure (psi) : 5,000
Mud Pumps
Quantity : 2
Make : Mud King
Model : MPK-1000 with Caterpillar 3508C Engines
Mud Tanks (on trailers)
Quantity : 2 x 480 bbl
Total capacity Active: bbls : 960
Total capacity Reserve/Water: bbls : 500
| |
| |
|
|
|
Id: WR956
 Reichdrill T-650-W Drilling Rig - For Sale
Worldrigs ID: WR956
Description :
1994 Reichdrill T-650-W Drill Rig
900 cfm / 350 psi air compressor
CAT 3406B diesel deck engine with newer turbocharger
Newer chains in 2021
Mounted on a 1994 Ford L9000 Truck
Cummins 8.3 diesel engine (Rebuilt with 2,000 miles since)
GVWR: 64,000 lb / GAWR 18,000 lb / RGAWR 46,000 lb
180 ft. of drill pipe (20ft x 3-1/2" Reg)
Newer pins and bushings in sprocket
Newer main rotation pump
Lincoln hydraulic welder
6-Rod carousel (uninstalled)
Weldco Beales casing hammer (uninstalled & needs to be rebuilt)
Drills weekly per seller
All newer seals in 10-spool
Both main cylinders rebuilt in 2021
Hammer oiler
Bean 18 GPM Water injection pump
30,000 lbs of pullback
18" Table Opening
Location : USA
| |
| |
|
Id: WR927
 Chicago Pneumatic CP650W Drilling Rig - For Sale
Worldrigs ID: WR927
Description :
Chicago Pneumatic CP650W Drill Rig
450 CFM / 250 PSI Piston Compressor
3306 CAT Deck Engine
Cummins Truck Engine
350 ft Drill Pipe
Table Bushings
Location : USA
| |
| |
|
Id: WR990
 Schramm T64HB Drilling Rig - For Sale
Worldrigs ID: WR990
Description :
1978 Schramm T64HB Drill Rig - S/N: T64HB-1186
Long Tower with jib boom
(9) 4-1/2" x 20ft drill rods included
Rod rack
Detroit Diesel Deck Engine
Schramm 425 cfm / 250 psi air compressor
Cat water injection pump
(3) leveling jacks
Table bushings
Drill collar and steel tooth tri-cone included
Mounted on a GMC 7500 Truck - VIN# TJV738V566193
13 Speed Transmission
6 Cylinder Detroit Diesel Engine
10.00-20 Tires
Shows 60,940 Miles
Note: Truck runs and drives when tested last
Location : USA
| |
| |
|
|
|
Id: WR936
 Watson Hopper Corsair 400 Drilling Rig - For Sale
Worldrigs ID: WR936
Description :
Recently inspected by Watson Hopper, recently replaced drilling
line Rig is complete with hand tools, wrenches, spares, etc.
Tee seal
2005 flow back 130 Bbl pit w/muffler
2006 Townsend 71/16" 5K double gate BOP with rams for 23/8,
27/8, 31/2" tubing, skid mtd. To a Hickman trailer w/4 bottle
accumulator
2005 WW enclosed dog house trailer 8ft x 16ft w/lockers tool
bench & tool storage, electrical panel w/lights & outlets, fully
insulated Near new
National J-250 quintaplex pump w/cat D353, twin disk clutch &
mission 6x5 charge pump
Tools :
Washington stripping head
hammer wrenches (7/8" - 1 7/8")
Extra BOP ram rubbers and 3K step bolts
5K twin choke manifold with 100ft of 2" 5K hard line
6ft elevator bails
8ft elevator bails
two rod BOPs (one manual and one hydraulic) w/spare bag rubbers
3" baash Ross slip bowl & slips w/3" ID elevators
2" 5K flow Tee w/3" lubricator pack off & pump
BJ rod tongs w/jaws for 5/8" - 1 5/16"
Oil Country Rod Elevators 5/8" - 1"
BJ open face tubing tongs w/23/8",27/8" & 3" heads
BJ 27/8 " elevators
BVM 23/8" elevators
Oil Country tubing air slips w/23/8" & 27/8" dies
3/4" & 1" rod wrenches
rod transfers 3/4", 7/8" & 1"
TIW valve 23/8"
TIW valve 27/8"
Other misc.consumables included
Location : USA
| |
| |
|
Id: WR829
 JC 50D SCR Drilling Rig - for Sale
Worldrigs ID: WR829 Description :
JC 50D - 1200HP Diesel Electric cantilever triple Drilling Rig regularly utilized
and ready to work. All components are Canadian & North American
stringent regulatory agency compliant,cold weather ready with recent
boiler recertification,plumbed for steam & electric heat.
Equipment summary :
Diesel Electric cantilever triple built in 2007.Depth rating 5000m
Box on Box sub structure, AER Class 4 or 5 BOP
ForumTM hydraulic cat walk system.
High Kelly JC 50 D DC powerd drawworks
10 line blocks strung to Tesco 350 ton Top Drive
Dual mud tanks c/w dual shale shakers,Integral hard top roof system
& mixing shack.
2-1300 HP triplex slush pumps DC powered (5000 PSI circulating system)
Dog house/water tank combination c/w tool shed
Change shack & accumulator building
#1,#2 & #3 Cummins powered DC gen sets
Power house SCR control building
2 pump houses
2 Generator houses
Boiler House
Mast Type :
High Kelly Beam Leg Cantilever Triple,315,000 daN 700,000# SHL w/12
Lines,racking capacity 5000m,16,000ft- 4-1/2" Drill Pipe.
Substructure Type :
Box on Box, with 20ft clear height, rotary capacity of 311,375 daN (350 ton).
Setback 311,375 daN (350 ton ). Forum TM Hydraulic catwalk. Moves without cranes
Drawworks :
RigmasterTM E90DC,90,000 Lbs Single Line Pull,745 kW (1200 hp), with Eaton
WC 1150 (Double 36"), and Yonge YZ - 208X2 drive. (Spare gear box available)
Elecrical Power Generation :
SCR unit power supplied by 3 Stamford 928 kW gens powered by
Cummins KTA 38-A (Spare KTA 38-A available)
Hoisting and Rotating Equipment
Top Drive :
Tesco EXI 600 HP 311,375 daN (350 ton)
Travelling Block : 5x42" 311,375 daN (350 ton)
Rotary Table : ZP - 275(National)
Pipe Spinner : Spinner Hawk Model 950 (Additionally Available)
Mud Tank :
187 m3 (1187 bbls), 6 Aagitators, 3-6"x5x11"centrifugal pumps,
2 Brandt King Cobra shale shakers,
Trip Tank Volume : 3.12 m3
Features : Integrel Hard top Lift roof w/tarps
Mud Pumps 2 - CSF - 1300(5000 PSI Circulating System) 12" stroke,
powered by 960kw (1300hp) GE 752 traction motots.
Well Control System :
Annular Preventor,11" 5000 psi double gate & single ram Shaffer type,
twin choke & kill lines
Choke Manifold :
Double wing 31/8" 35 mPa(5000 psi) Remote choke compatible
Accumulator :
Dong Su,7 station (Critical Sour compliant), 680 liters (180 Gal)
Degasser : Dual Poor-boy degassers & tank
Auxiliary Equipment :
Rig Manager accommodation, Tool shack,Simonneau 125 HP Boiler
Misc sub containers, Flare line rack,All pipe contained in tubs
Notes :
Major Component loads(Excluding pipe tubs,matting & misc.loads)=
@20 depending on move parameters @45 location move loads
BOP stack & Pipe Tubs negotiable
Tig Managers accommodations included
Drill pipe,Drill collars & HWDP not included
Tongs,Slips,Elevators,Bails & misc handling equipment negotiable
Location : USA
| |
| |
|
Id: WR820
 1500HP Lewco/Cameron LDW 750K Rig
Worldrigs ID: WR820
Specifications
Drawworks
Lewco/Cameron LDW 750K 1500 HP , Low low rated 648,000#,
single line pull, w/10 lines, w/2 AC 1150 input, gear drive. Hydraulic
Actuated, Parking disc brake, 1 3/8” wirerope 6x19 IWRC.
Prime Power
Omron/IDE 4 VFD System, (3) Cat 3512’s with Kato 1365KW AC Generators.
Auxillary
Cold start air system, primary rig air supply, floor hoisting systems.
Mast/Substructure
DSI 152’, 750,000# hook load, with 12 lines strung, Singshot design,
500,000# setback, Crown block (6) 50” sheaves 1 3/8” groove,
Fastline (1) 60” 1 3/8” grooved.
Top Drive/Traveling Block/Pipe Handling
CanRig 1250 500Ton AC Top Drive, American Block B60F500 Block,
RT 275, 27 ½” Rotary w/400HP AC input.
Mud Pumps
(2) Lewco WH-1612 1600HP, 5,000psi, each driven by (2)
1150HP AC input motors.
Mud System
(2) tank system, 1200 bbl capacity, (2) Swaco Mongoose shale
shakers, 6-Oil Works 15HP agitators, Derrick desander 2 12”
cones with 5x6 centrifugal driven by 100 HP electric motor,
NOV Derrick desilter 12 4” cones with 6x8 centrifugal driven by
100 HP electric motor, NOV Derrick Vaccu Flow 1200
Degasser, 48 x 20 gas buster.
BOP Equipment
13 5/8” 5000# annular, 13 5/8” 5000# double ram, 3000 PSI
accumulator, 120 gal, 5 station with remote, 4 1/16” 5000# x 2 1/16”
5000# choke manifold.
Fuel Tank : 18,000 gal
Water Tank : 500 bbl
Auxiliary
Deadline Anchor, Weight indicator, Pump SPM and PSI,
manual Tongs, elevators, slips and clamps
| |
| |
|
|
|
Id: 9000-439
 Continental Emsco D3 Type II Drilling Rig for Sale
Worldrigs ID: WR511 Drawworks
Continental Emsco D3 Type II 1000 HP, Low low rated 525,000#
single line pull, w/10 lines, with twin GE 752 DC motor input.
Wichita Air actuated water cooled 236 disc brake, 1 ¼” wirerope
6x19 IWRC.
Prime Power
Omron SCR System, (3) generator bays, (3) SCR bays, (3) Caterpillar
3512B with Kato 1365 KW AC gen sets.
Auxillary
Cold start air system, primary rig air supply, floor hoisting systems.
Mast/Substructure
Dreco 142’, 550,000# hook load, with 12 lines strung, 20’ Box on Box sub, 330,000# setback,
Crown block (6) 42” sheaves 1 ¼” groove, Fastline (1) 50” 1 ¼” grooved.
Top Drive/Traveling Block/Pipe Handling
CanRig Model 6027 VF AC 275 Ton Top Drive, Oilwell 250 Ton Block,
SJ Petro 27 ½” Rotary/drwks driven.
Mud Pumps
(2) Continental Emsco FB-1300, 5,000psi, each driven by (2) GE 752 DC motors.
Mud System
(2) tank system, 1200 bbl capacity, (2) National 285P linear motion shale shakers,
NOV Brandt desander 2 12” cones with 5x6 centrifugal driven by 100 HP electric motor,
NOV Brandt desilter 12 4” cones with 6x8 centrifugal driven by 100 HP electric motor,
NOV Brandt D-1000-C Degasser, 48 x 20 gas buster.
BOP Equipment
13 5/8” 5000# annular, 13 5/8” 5000# double ram, Church Energy 3000 PSI accumulator,
120 gal, 5 station with remote, 4 1/16” 5000# x 2 1/16” 5000# choke manifold.
Fuel Tank : 18000 gal
Water Tank : 500 bbl
Auxiliary
Deadline Anchor, Weight indicator, Pump SPM and PSI, Top Drive VF
Control house, SCR system controls, manual Tongs, elevators, slips and
clamps
| |
| |
|
Id: WR909
 Ingersoll-Rand 350 Crawler Air Drilling Rig - For Sale
Worldrigs ID: WR909 Description :
Ingersoll-Rand 350 Crawler Air Drill Rig
Updated system
Joy drifter
Note: Runs and drills but needs some oil leaks fixed
Location : USA
| |
| |
|
Id: 9000-375
 SK675 Carrier Mounted Drilling Rig for Sale
Worldrigs ID: WR29 Description
SK675 Carrier Mounted Drilling Rig
675 HP, 10,000’ Capacity
Rig : Service King SK-675 manufactured in 2010
Drawworks : 665 HP SK-675 - 42X12 water cooled drums with Hercules
Quick release deadline anchor
Power : Detroit Diesel Series 60 - 665 HP 4500OFS Allison Transmission
Mast : 109’ telescoping – 315,000# Static Hook Load with auto racking board
Substructure : 8’ – 14’ cantilever with Base Beam, 350,000# Setback Capacity
Brake : Double Disc Assist 48X8
Rotary Table : 20 ½” Rotary Table
Swivel : 175 Ton
Blocks : 150 Ton 4 sheave 8 line with spring hook
Mud pumps : 2- 2010 Sentry SI-1000HP Triplex Pumps powered by
Detroit Diesel 12V2000, 1050 HP each
Steel mud pits : 2 Tank 550 barrel skid mounted mud system.
580 GPM MCM shale/Odrill dual tandem shakers. Wired to
meet API electrical standards
Mud mixing pump : 60 HP Electric Mixer 5 X 6 X 14
Kelly : 40’ 4 ¼ Hex
Light plant : Generac SD500KW powered by 600 HP Volvo
16.0 DTA with 455KW Cat SR-5 powered by CAT 3456
B.O.P. : 11” x 3000 psi Annular & 11” x 3000 psi Double/Shaffer
Accumulator : 2010 Burnsco single station, 8 bottle 3000 lbs
spool with remote closing controls
Kelly Spinner : Hydraulic Forward & Reverse
Automatic Driller : Pason - Satellite
Recorder : Pason – Martin Decker 3 pin
Water tank : 500 Barrels
Water pump : 3” Honda
Fuel tank : 3500 gallons
Cathead : Hydraulic
Elevators : 4” BN, 4 ½ “ BN, 5 ½ , 7” , 9 5/8” Casing
Slips : 4”, 4 ½” DP, 5 ½” – 7” DC, Casing up to 9 5/8”
Special equipment :
Doghouse
Rig Manager Wellsite Trailer
PASON
20’ Steel skidded supply/storage building & supplies
All subs, hand tools, tongs & equipment for rig
| |
| |
|
|
|
Id: WR1056
 Driltech D40K Drilling Rig - For Sale
Worldrigs ID: WR1056
Description :
1977 Driltech D40K Drill Rig
Sullair 750 cfm / 350 psi Air Compressor (unknown hours)
CAT 3406B Diesel Deck Engine - rated 400 HP (Rebuilt 600 hours since)
Dual Carousels
Includes 300ft of 4.5" X 25ft Drill Pipe and Tooling
Mounted on a CCC (Crane Carrier Company) Truck
Cummins NTC 350 Diesel Engine
Note: New White color paint job completed in July 2024
Location : USA
| |
| |
|
Id: WR1016
 Derex 2630-22 Arthur Drilling Rig - For Sale
Worldrigs ID: WR1016 Description :
Derex 2630-22 Arthur (Air – Rotary – Top – Head) Drill Rig
Truck
Peterbilt 567
Paccar 13 Litre.
Allison 6 speed automatic
Air ride
Transfer Case
Namco (oilfield quality)
Safe Shift
Hydraulic System
Sundstrand, Bosch Rexroth plus gear pump
Top Head
Variable torque and RPM with 2” thru-hole
0-160 rpm @ 8,000-lbf torque
Derrick & Feed System
26ft top head stroke
30,000-70,000 lbs pullback
20,000-lbs pulldown
120 FPM
Air Compressor
Vanair/ Sullair 750 cfm / 350 psi @ 1,800 rpm and
1050 cfm / 350 psi @ 2,200 rpm
Main Winch
12,000 lbs
Hydraulic 135° jib
2,500 lbs
Remote on helpers side for winch
Control Panel
Straight hydraulic controls (no electrics to fail)
Marine grade electric switches (for lights)
Murphy engine monitor display
Twin platforms
Leveling Jacks
Four 36” stroke independently controlled
Night Lights
6 LED night lights
Toolboxes
30”x 18” x 18”
Overall Dimensions
Length: 38ft
Width: 8ft 6”
Derrick up height: 42ft
Derrick down height: 13ft 4”
Water Injection
9-GPM FMC injection pump
Gross Weight
44,000lbs - 46,000lbs
Pre-Order Drill from EWDAdditional Options
4 – 6 Month Leadtime from Date Ordered
Sand Line Winch
1,500ft sand line
Mud Pump
3x2x13 centrifugal 300 gpm/300 psi
Centerline piston 150 gpm/600 psi
Line Oiler
Many oilers available
Water InjectionOffsyder Rod Handling System
18 gpm FMC injection pump
Drill Pipe Packages
Wire Feeder and Box
Hydraulic or Gas Welders
Location : USA
| |
| |
|
Id: WR822
 Used K600 Dreco Rig for sale
Worldrigs ID: WR822 Specifications
Single Drum K600 draw works with 1” drill line
103’ x 231 # Dreco Derrick with rods & tubing racking boards
Detroit Diesel Series 60, 475 HP engine
Traveling block, Ideco DS110, slotted speed kit design, 2 sheaves, 110 ton
Foundation, iron stands on 3” x 12” timbers.
Non folding 12’ steel beam with iron stands
Allison Model M5610H transmission
Disc Assist brake, model 37.5 at the drum
Tong, Gill Model 500 with back up head
Blowout Preventer,
Townsend Type 81, 7-1/16” x 5000 psi. double stack
Stripper Head, Hall style 1500 psi.
Tubing Slips, Guiberson 60 ton air operated
Rod Elevators, 5/8” to 1”
Tubing Elevators, 2-3/8” to 2-7/8” EUE
Wash Swivel, King 53GA
Hand Tools
| |
| |
|
|
|
Id: WR986
 Ingersoll-Rand TH60 Drilling Rig - For Sale
Worldrigs ID: WR986
Description :
1985 Ingersoll-Rand TH60 Drill Rig - S/N: 0838
Mounted on an International Paystar 5000 Truck - VIN #2HTTGDWT6FCA161151985
Detroit 8V71 diesel engine (6673+ hours)
IR 750 cfm / 250 psi Air Compressor (6857+ hours)
6 Rod Carousel
15 Drill Pipe (20ft x 4-1/2") included
128,081+ Miles on Truck
Hydraulic Leveling Jacks
Pipe Rack
| |
| |
|
Id: WR811
 Cooper 350 Trailer Mounted Drilling Rig
Worldrigs ID: WR811
General Description
Make : Cooper
Estimated Drilling Depth : 5,000ft
Estimated Rig Move Loads : 38
Estimated Camp Move Loads : 35
Rated HP : 350
Mast
Height : 104.00 ft
Static Hook Load Capacity : 176,000 lbs
Mast Racking Capacity : 3,600 ft
Substructure
Style : Telescoping
Height : 12.92 ft
Clear Height : 9.82 ft
Casing Capacity : 176,000 lbs
Maximum Setback Load (lbs). : 132,000
Drawworks
Make : Cooper
Model : 4210-3808
Power Rating : 350 hp
Input Power : 1 ea Caterpillar
Drilling Line Size : 1"
Auxillary Brake : Parmac 122
Top Drive / power Swivel : No Top Drive
Swivel
Make : Upetrom
Model : CH 125
Capacity : 125 Ton
Rotary Table
Make : Ideco 17.5
Table Opening : 17 1/2
Maximum Load Rating : 150 ton
Power Generation
Mechanical Rig
Mud System
Mud Pumps : 1 ea Gardner Denver 1PY-172
Power Rating : 1,000 hp @ 130 spm
Pressure Rating : 5,000 psi
Active Mud Volume : 906 bbls
Reserve Mud Volume : 101 bbls
Shale Shakers : 1 ea Upetrom
Mud Cleaner : N/A
Desander : Upetrom 2" X 12 Cones
Desilter : Upetrom 3" X 6 Cones
Centrifuge : : N/A
Well Control
BOP Closing Unit : Upetrom
| |
| |
|
Id: WR989
 Schramm T300 Drilling Rig - For Sale
Worldrigs ID: WR989
Description :
2005 Schramm T300 Drill Rig
Mounted to a 2005 International Truck
DT466 Diesel Engine
42,000 miles
9,000 hours
Sullair 300 cfm / 200 psi Air Compressor
500 ft of drill pipe (20ft x 3-1/2”) included
| |
| |
|
|
|
Id: WR1049
 Gardner Denver 1500 Drilling Rig - For Sale
Worldrigs ID: WR1049
Description :
1978 Gardner Denver 1500 Drill Rig :
Mounted on a 1990 International Truck
Cummins Diesel Engine
W B J Air Compressor - 2 Stage
3 Leveling Jacks
Bean Water Injection Pump
Hydraulic Oil Cooler
8" Rotary Table
Set Up With A 5X6 Mud Pump
35 ft To 40 ft Derrick
52 Meters of used Drill Pipe & 2 Collar Pipes
Spare Parts For 5 X 6 Mud Pump
Location : Western Africa
| |
| |
|
Id: WR819
 Skytop Brewster Model TR-800 Rig
Worldrigs ID: WR819
Specifications
Drawworks
Reconditioned Model H14610-38 Dwks - S/N 178,
Clutch - Twin disc Model P0-230 AND PO-234,
Brakes - 46 X 10, New drum grooved for 1 1/8" drill
line (includes 3000 ft 1 1/8" 6X19 IWRC IPS drill line)
Sand Line Drum
Twin reconditioned twin disc Model PO-224,
Brakes 38 x 8 (includes 15,000 feet 9/16" new sandline)
Hydromatic Brake
New WWL V-80 hydromatic water assist brake
Compound
Rebuilt Skytop Brewster
Engines
Factory Detroit Diesel Model 60 Series rated at 475 hp each
@2100rpm
Transmission
Factory Allison Model CLT-5860-4 (5 speed)
Mast
Recertificed by Nove - 115ft clear working height - 410,000
#Telescoping Mast, Number of lines to block 8, API operating
hook load is 388,000 lbs, drill line size 1 1/8", Racking board
height 55ft, 58ft, or 70ft, Racking board capacity 10,080 ft -
4 1/2" drill pipe (doubles)
(Mast includes new crownomatic emergency stop system, also includes
stand pipe with gooseneck union and 4" 5000 psi gate valves, also
includes new geronimo derrick escape device with wireline/clamps
and anchor) - Mast is complete with category 4 repair and has OEM mfg.
certificate of repair and inspection.
New Crown Block
Certified by Nov - Crown block is set up for an 8 line string up. Crown
sheaves are grooved 1 1/8". All sheaves are mounted on tapered roller
bearings w/grease zerts. Crown includes (1) 42" fast line sheave and 3
ea 30" cross over sheaves, one dead man. New crownomatic installed.
Reconditioned Dead Line Anchor
Following items are new on carrier :
Suspension 100,000# Total axle and suspension along with tag axle.
Tires and rims are 10:00 x 20 "Desert Tread", Main hydraulic reservoir,
Hyd cylinder controls, drillers console w/hose bundle, air hyd hoses and
steel lines, telescoping cylinders, raising cylinders, mast locking cylinder,
hyd jack cylinders (4), Manual jacks (2), all new jack stands.
| |
| |
|
Id: WR1036
 IDM Drilling Rig - For Sale
Worldrigs ID: WR1036
Description :
Drawworks
Manufacturer : IDM Equipment
Model : IDM DC-1500
Power : 1500-HP (Powered by (2) GE/GM 800-HP DC Traction Motors)
Serial Number : N/A (Asset DW012)
Hours/Rebuild : 5629
Engines
Manufacturer : Cummins
Model : KTA50 Diesel Engines (x3)
Power : 1470-HP each (With Air Start)
Configuration : Skid Mount Enclosures with Generators
Engine Serial Numbers and Hours :
Engine 1 : S/N 3316778, Hours 50010
Engine 2 : S/N 33167782, Hours 49456
Engine 3 : S/N 33167860, Hours 49144
Generator Sets
Manufacturer : AVK, WEG
Capacity : 1050-KW (x3)
Configuration : Unitized with Engines, includes SCR Skid
Mast
Manufacturer : IDM
Type : 136ft Telescoping Mast
Serial Number : M-5699
Capacity : 750,000-LB Hookload
Features : Can Accommodate 350-Ton Drive, Geronimo Line, Hydraulic Lift Cylinders, Mast Dolly
Substructure
Manufacturer : IDM
Type : 22ft Hydraulically Telescoping Substructure
Capacity : 750,000-LB Rotary Load, 450,000-LB Simultaneous Setback
Features : Integrated Drainage System, (2) Braden Floor Winches
Rotary
Type : EMSCO Type 371⁄2 Rotary
Drive : Independently driven by (1) 800-HP Traction Motor
Blowout Preventer (BOP)
Configuration :
(1) 13-5/8" 10,000-LB Shaffer Type Double Ram BOP
(1) 13-5/8" 10,000-LB Shaffer Type Single Ram
(1) 13-5/8" 5,000-LB Shaffer Type Annular
Accessories :
(1) 6-Station Accumulator (Consolidated Pressure, Model 6S-3SF60-25, API 16E)
10,000-LB Flexible Choke Line
4ft x 4’’ 10,000-LB Choke Manifold
Mud Pumps
Manufacturer : BOMCO
Model : F-1600 Triplex Mud Pumps (x2)
Pressure Rating : 7500 PSI
Motors : EMD DC Traction Motors rated at 1600-HP
Mud Pump Serial Numbers and Hours :
MP 1 : Bomco 1600
MP 2 : Serial Number N/A (Asset MP008), Hours/Rebuild 9173
Mud System
Capacity : 848-Barrels Total Active Capacity
Components :
(2) Covered 424-Barrel Tanks with Electric Agitators
(1) Mud Processing Skid with Brandt Equipment (Shakers, Degasser, Desilter)
(1) Trip Tank Skid (106-Barrel Capacity) with Centrifugal Pump
Top Drive
Manufacturer : Canrig
Model : 350-Ton AC (Model 350)
Serial Number : 454
Features : "ROCKIT" Capability
Overhead String
Configuration : 400-Ton Six Sheave Block with a 12 Line String Up of 1-3/8’’
Driller Controls
Type : Drillers Cabin Skid
Features : Varco Electronic Driller and Block Control System, Block Speed
Controls, Joystick Controlled Drawworks Speed, Touch Screen and Manual
Control of EDRILL and SCR
Walking System
Manufacturer : Orion
Type : Hydraulic Walking System
Components : HPU Skid and Trailer
Auxiliary Equipment
Automatic Catwalk : Canrig, Model PO 3000-26-B-A-A-N-S, S/N 300368
Wireline Unit : Five Star Rig with 25,000’ of .092 Wireline
Motorized Drill Line Spool
Quarters : Toolpusher and Crew Quarters (Skidded, Furnished, Satellite System)
Meeting and Change House Combo Skid
Hydraulic Power Unit Skid with Centrifugal Pumps and Reservoir
Pipe and Kelly Spinner : Hydraulic (Hawk, Spinmaster, Model 550)
Fuel Tank : 12,000 Gallons, Double Wall, Skidded with Pumps
Water Tank Skid with Centrifugal Pumps
Hot Water Power Washer : N/A
Location : USA
| |
| |
|
|
|
Id: WR1055
 Geoprobe 54DT Soil Sample Drilling Rig - For Sale
Worldrigs ID: WR1055
Description :
2002 Geoprobe 54DT Soil Sample Drilling Rig - S/N: 7211T54
Track Mounted
Powered By a 4-Cylinder Kubota Diesel Engine
Used Rods And Bits Included
According To The Previous Owner: Geoprobe Rebuilt 1,213 Hours Ago
Rated for drilling to around 30 ft depth with 2.25” diameters tooling
54” stroke (normally runs 4 ft drill rod)
Width = 48" inches
Folded Height = 65" inches
Unfolded mast height = 123" inches
Length = 92" inches
Weight = 3700 lbs
Torque = 609 ft lb
Pulling power = 27,000 lbs
Reliable GH41 Soil Probing Hammer
Rear stabilization outriggers
Good operating drill when tested last
Location : USA
| |
| |
|
Id: WR435
 New 540hp Mobile Drilling / Heavy Workover Rig for Sale
Worldrigs ID: WR435
Specifications
Drawworks : ALCO 500DD (500 HP) 42” x 10” and 38” x 8” Drum Sizes
Drawworks Power : 1 Caterpillar C-15 (540 HP)
Transmission : Allison OFS 4700 with Namco Dropbox
Mast : Telescopic Double – 112 feet Internally Guided
Static Hook load Capacity 300,000 pounds
Well Servicing 2 7/8” 18,000 ft. (5,550 Meters)
Workover 3 1/2“ 11,000 ft. (3,350 Meters)
Drilling 4 ½” 9,000 ft. (2,740 Meters)
Substructure
16’ floor Height
Set back Capacity – 300,000 Lbs
Travelling Block : TSM 160 Ton
Swivel : TSM 150 Ton
Rotary Table : Hacker 17 ½” c/w bowl inserts
Mud Pump : One (1) Gardner Denver PZ-7
Mud Pump Power : Caterpillar C-15 – 540hp
Transmission : 1 Allison OFS 4700
Mud System
1 Tank System
Tank #1 – 500bbls
1 mixing hopper
Solids Control :
One (1) DFTS Mud Conditioner c/w Desilter & Desander
Centrifugal Pumps : One (3) 5 x 6 c/w 60 HP Motor
BOP Equipment
One (1) 11” x 3,000 psi Cameron Townsend Annular
One (1) 11’ x 3,000 psi – 11” x 5,000 psi Crossover Spool
One (1) 11” x 5,000 psi Cameron Townsend Double Gate
One Drilling Spool 11” x 5,000 psi x 11” x 5,000 psi
C/W Choke line valves and Kill line Valves
Choke Manifold
3 1/8” x 5,000 psi Choke Manifold
Two (2) Manual Choke
BOP Closing Unit
4 station, 3000 PSI, 120 Gallon
10 Bottles (12 gallon bottles)
Power Generation : Two (2) Caterpillar C-15 – (50 Hz) (355 kW)
Air Compressors : Two (2) 30HP Rotary Screw Air Compressors c/w filtration system
Instrumentation : Weight Indicator. Mud pump and Standpipe Pressure Gauge, Tong Line Torque
Water /Fuel / Change Room : 100 Barrel Water Tank c/w Two 4 x 3 Centrifugal water Pumps
Catwalk / V Door : 45’ Catwalk with V-door
Pipe Racks : One set of pipe racks
Casing Stabbing Board : Deckard manufactured
Combination Building
Contains – 4 Station Accumulator, two 30HP Rotary Screw Air Compressor units c/w
Filtration System, Two caterpillar C-15 – 355 kW Generators
Suitcases : Supply four (4) 10’ Suitcases
| |
| |
|
Id: WR580
 MD Cowan Super Single 1000hp SCR Rig for sale
Worldrigs ID: WR580
General
Rig Type or Model : Super Single
Year Built/Re-built : 2009 (Delivery 2010)
Operating Capabilities
Maximum Static Hook Load (lbs) : 550,000
Maximum Setback Load (lbs) : N/A
Maximum Rotary Load (lbs) : 550,000
Maximum Top Drive Load (lbs) : 500,000
Mast (on carrier)
Make/type : IDS 72’ 550,000
Height - ft : 72
Width of base - (ft x ft) : 8’-1” x 5’-4”
Width of top - (ft x ft) : 8’-1” x 5’-4”
Static hook load - (lbs) : 550,000
API Gross Nominal Capacity - (lbs) : 550,000
With rated set-back - (lbs) : N/A
Max rated hook load for 8 lines to travelling block (lbs) : 550,000
Substructure
Make/type : IDS
Height -(ft) : Height of drillfloor : 19’-6”
Width - (ft) : 12
Static setback capacity - (lbs) : Max rated setback : N/A
Casing load capacity - (lbs) : 550,000
Rotary Capacity - (lbs) : 550,000
Drawworks
Make/type : Rig Tech RT-400BE
Rated capacity - HP : 1000
Auxiliary brake : Eaton WCB424
Crown Block
Make/type : IDS
Rated capacity - lbs : 550,000
No. of sheaves : 7
Travelling Block
Make/type : MD Cowan
Rated capacity - lbs : 550,000
No. of sheaves : Integrated 4 Sheave
Hook
Make/type : N/A
Rated capacity - lbs : N/A
Drilling Line
Size - inches : 1-1/4 6 x 19 EEIPS
Make/Type : WireCo
Dead Line Anchor
Make/type : Hercules HA-119T
Load rating - lbs : 60,000
Rotary table
Make/type : N/A
Drive: (independent or driven from drawworks) : N/A
- Motor HP (if independent)
Maximum opening - inches : 27-1/2
Top Drive
Make & Type : VentureTech XK-250
Electric or hydraulic : Hydraulic
Rated capacity - lbs : 500,000
Test/working pressure - psi : 5,000
Rated power - HP : 24,000
Maximum rotary speed (RPM) : 165
Prime Movers (on trailers)
Quantity : 3
Make : Caterpillar
Type : 3512B
Continuous output power available HP each engine : 1830
AC- Generator
Quantity : 3
Make : Kato
Type : 6P6-3300
Continuous output power available HP each generator :
Output ratings :
- kW : 1225
- Volts : 600
SCR System (on trailer)
Number of SCR bays : 4
Make : Omron
Type : Ross Hill Style
Rig Service Air System
Air Compressors :
Quantity : 2
Make : Sullivan-Palatek
Model : H/25-D
Iron Roughneck
Make/Type : Gray EOT. Floorhand
Pipe handling range (inches) : 3-1/2” to 8-5/8”
BOP Annular
Quantity : 1
Make : Cameron or Equivalent
Type : Type 90
Size (inch) : 13-5/8”
WP (PSI) : 5,000
BOP Ram Type Preventer
Quantity : 1
Make : Cameron or Equivalent
Type : U
Single/double : Double
Size (inch) : 13-5/8”
WP (PSI) : 5,000
BOP Accumulator Unit
Make : Burnsco
Reservoir capacity liter : 795
No. of stations : 6
No. of bottles/banks installed : 12
Total bottle capacity liter : 484
Bottle working pressure (psi) : 3,000
Choke Manifold (on trailer)
Make : Swaco or Equivalent
Size inch : 4”
Working Pressure (psi) : 5,000
Mud Pumps (on trailers)
Quantity : 2
Make : Weatherford
Model : MP13
Power rating / pump (HP) : 1,300
Mud Tanks (on trailers)
Quantity :
Total capacity Active: bbls / m3 : 1,006 / 160
Total capacity Reserve/Water: bbls / m3 : 1890 / 300
Shale Shaker
Quantity : 2
Make : Derrick
Type : Flo-Line Cleaner-504
Desander
Make / type : NOV
- Quantity : 3
- Diameter : 10”
Desilter
Make / type : NOV
- Quantity : 12
- Diameter : 4”
Mud/Gas Separator (on trailer)
Make/type : Triple S Construction
Height of mud seal : 10ft
Vacuum Degasser
Make : Derrick
Type : Vacu Flo-500
Camp
Main Camp POB : 81
Fly Camp POB : 5
| |
| |
|
|
|
Id: WR1065
 Schramm T64HB Drilling Rig - For Sale
Worldrigs ID: WR1065
Description :
Used – 1978 Schramm T64HB Drill Rig
Retrofitted – S/N: 861208 & BM#: B102-0024
GHH 750 cfm / 300 or 850 cfm / 200 psi Air Compressor
Detroit 8V92 Diesel Deck Engine
280 ft of Drill Pipe (20ft x 4-1/2” x 2-7/8” IF), Tooling, a few spare parts included
Mounted on a 1978 GMC 7500 Truck – VIN#: TJV738V575982
Detroit 6V53 Diesel Engine 25,000 Miles
Location : USA
| |
| |
|
Id: WR1021
 Brand New Massenza Hydraulic Drilling Rig Model Mi8 Mounted On Tracks (Crawler)
Worldrigs ID: WR1021 Description :
Used for water well research, geological findings, mineral research and
geothermal applications.
Work Methods:
Rotary drilling with direct circulation by Water, Mud, Air or Foam
Down the Hole Hammer Drilling
Auger Drilling
Core Drilling
Main Framework:
Made out of electrically welded high quality steel structural members
and tubular pieces.
N°4 hydraulic stabilizers of which two are fixed and the other two
can be manually widened for the leveling and positioning of rig,
complete with check valve and support plate.
Stabilizers dimensions 3 3/4" x 3 5/32" x 2 3/8", stroke 1 ft 3 3/4",
lifting force 26,566 lbs each.
Pre-arrangement for drill pipe box.
Control Panel Fixed:
Unified type, complete with valves, distributors, pressure gauges, diesel
engine and rig control instrumentation and controls for rig positioning.
Diesel Fuel Tank:
Fuel tank 39.6 US Gallons.
Crawler Undercarriage:
Tracked crawler unit complete with hydraulic circuit of translation and
controls on the portable unit.
Steel tracks width 11 13/16"
Total width 5 ft 5 15/16"
Length 8 ft 4 9/16"
Traction force 15076 lbf
Speed 0.74 m/h (1.2 km/h)
Maximum Drilling Depth with mud pumps is : 260 mts (850 ft).
| |
| |
|
Id: WR926
 Atlas Copco T4BH Drilling Rig - For Sale
Worldrigs ID: WR926
Description :
2009 Atlas Copco T4BH Drill Rig
Serial Number: 9028 (US009028)
IR HR2.5 1070 cfm / 350 psi Air Compressor
Cummins QSX15 Diesel Deck Engine (Tier III)
Spur Gear Power Head
5 Rod Carousel
Hammer Oiler (DHD Lubricator)
Drillers Cab
Hydraulic Leveling Jacks
Mounted on a CCC (Crane Carrier Company) Truck
CAT Tier III Diesel Engine
Note: Can be converted to T4W and set up for water well drilling at an extra cost
Location : USA
| |
| |
|
|
|
Id: WR636
 850HP Super Single Rig for Sale
Worldrigs ID: WR636
General Description
Estimated Drilling Depth : 10,000 ft
Estimated Rig Move Loads : 22
Estimated Camp Move Loads : 4
Rated HP : 850
Mast
Height : 80.00 ft
Static Hook Load Capacity: 300,000 lbs
Mast Racking Capacity : N/A
Substructure
Style : Parallelogram
Height : 14.00 ft
Clear Height : 11.00 ft
Casing Capacity : 300,000 lbs
Maximum Setback Load (lbs.) : 300,000
No Drawworks
Top Drive / Power Swivel
Make : Foremost
Model : F 150 T
Capacity : 150 Ton
No Swivel
No Rotary Table
Power Generation
Engines : 1 ea. Detroit Diesel Series 60
Generators : 2 ea. Stamford Power System HCI534D
SCR / VFD / DC/DC : Rack & Pinion Rig
Enhancements
Iron Roughneck : NOV IR-3080
Mud System
Mud Pumps : 2 ea NOV F-800
Power Rating : 800 hp @ 150 spm
Reserve Mud Volume : 0 bbls
Pressure Rating : 5,000 psi
Active Mud Volume : 700 bbls
Shale Shakers : 2 ea. MI Swaco Mongoose
Desander : N/A
Desilter : N/A
Mud Cleaner : N/A
Centrifuge : N/A
Well Control
Choke Manifold : 2 1/16" 5,000 psi
BOP Closing Unit : Control Technology, 5 station 3,000 psi
| |
| |
|
Id: WR582
 1000hp SCR MD Cowan Super Single Rig for sale
Worldrigs ID: WR582
General
Rig Type or Model : Super Single
Year Built/Re-built : 2010 (Delivery 2011)
Operating Capabilities
Maximum Static Hook Load (lbs) : 550,000
Maximum Setback Load (lbs) : N/A
Maximum Rotary Load (lbs) : 550,000
Maximum Top Drive Load (lbs) : 500,000
Mast (on carrier)
Make/type : IDS 72’ 550,000
Height - ft : 72
Width of base - (ft x ft) : 8’-1” x 5’-4”
Width of top - (ft x ft) : 8’-1” x 5’-4”
Static hook load - (lbs) : 550,000
API Gross Nominal Capacity - (lbs) : 550,000
With rated set-back - (lbs) : N/A
Max rated hook load for 8 lines to travelling block (lbs) : 550,000
Substructure
Make/type : IDS
Height -(ft) : Height of drillfloor : 19’-6”
Width - (ft) : 12
Static setback capacity - (lbs) : Max rated setback : N/A
Casing load capacity - (lbs) : 550,000
Rotary Capacity - (lbs) : 550,000
Drawworks
Make/type : Rig Tech RT-400BE
Rated capacity - HP : 1000
Auxiliary brake : Eaton WCB424
Crown Block
Make/type : IDS
Rated capacity - lbs : 550,000
No. of sheaves : 7
Travelling Block
Make/type : MD Cowan
Rated capacity - lbs : 550,000
No. of sheaves : Integrated 4 Sheave
Hook
Make/type : N/A
Rated capacity - lbs : N/A
Drilling Line
Size - inches : 1-1/4 6 x 19 EEIPS
Make/Type : WireCo
Dead Line Anchor
Make/type : Hercules HA-119T
Load rating - lbs : 60,000
Rotary table
Make/type : N/A
Drive: (independent or driven from drawworks) : N/A
- Motor HP (if independent)
Maximum opening - inches : 27-1/2
Top Drive
Make & Type : VentureTech XK-250
Electric or hydraulic : Hydraulic
Rated capacity - lbs : 500,000
Test/working pressure - psi : 5,000
Rated power - HP : 24,000
Maximum rotary speed (RPM) : 165
Prime Movers (on trailers)
Quantity : 3
Make : Caterpillar
Type : 3512C
Continuous output power available HP each engine : 1830
AC- Generator
Quantity : 3
Make : Kato
Type : 6P6-3300
Continuous output power available HP each generator -
Output ratings :
- kW : 1225
- Volts : 600
SCR System (on trailer)
Number of SCR bays : 4
Make : Omron
Type : Ross Hill Style
Rig Service Air System
Air Compressors :
Quantity : 2
Make : Sullivan-Palatek
Model : H/25-D
Iron Roughneck
Make/Type : Gray EOT. Floorhand
Pipe handling range (inches) : 3-1/2” to 8-5/8”
BOP Annular
Quantity : 1
Make : Cameron or Equivalent
Type : Type 90
Size (inch) : 13-5/8”
WP (PSI) : 5,000
BOP Ram Type Preventer
Quantity : 1
Make : Cameron or Equivalent
Type : U
Single/double : Double
Size (inch) : 13-5/8”
WP (PSI) : 5,000
BOP Accumulator Unit
Make : Burnsco
Reservoir capacity liter : 795
No. of stations : 6
No. of bottles/banks installed : 12
Total bottle capacity liter : 484
Bottle working pressure (psi) : 3,000
Choke Manifold (on skid)
Make : Swaco or Equivalent
Size inch : 4”
Working Pressure (psi) : 5,000
Mud Pumps (on skids)
Quantity : 2
Make : Weatherford
Model : MP13
Power rating / pump (HP) : 1,300
Mud Tanks (on skids)
Quantity :
Total capacity Active: bbls / m3 : 1,006 / 160
Total capacity Reserve/Water: bbls / m3 : 1890 / 300
Shale Shaker
Quantity : 2
Make : Derrick
Type : Flo-Line Cleaner-504
Desander
Make / type : NOV
- Quantity : 3
- Diameter : 10”
Desilter
Make / type : NOV
- Quantity : 12
- Diameter : 4”
Mud/Gas Separator (on skid)
Make/type : Triple S Construction
Height of mud seal : 10ft
Vacuum Degasser
Make : Derrick
Type : Vacu Flo-500
Camp
Main Camp POB : 87
Fly Camp POB : 8
| |
| |
|
Id: WR921
 Schramm T450H Drilling Rig - For Sale
Worldrigs ID: WR921
Description :
Schramm T450H 1990
S/N : J102-3415
Compressor : GHH 750/300 750 SCFM at 300 psig & 2100 rpm, 4000 hours
Motor : Detroit 6V92 Silver 1800 hours and 1 spare motor and lots of pieces, Mini fract.
Truck : Ford FT900 1990 250 hp
| |
| |
|
|
|
Id: WR1000
 Failing CF-15 Drilling Rig - For Sale
Worldrigs ID: WR1000 Description :
Failing CF-15 Drill Rig
5-1/2” X 8“ Dupex Piston Mud Pump
7-1/2” Retractable Table
Air Clutches
Mounted on a 1982 BRIGADIER Truck
Detroit 6 53 T Diesel Engine PTO (with Paperwork from Rebuild 3-4
Years ago & a new radiator and cooling system was also installed
at time of engine rebuild)
The pump was recently rebuilt and the table is in great shape
Lovejoy style couplings were replaced with a drive shaft
400 ft of 2-3/8" IF (2-3/8" X 15ft)
Note: It does not have an air compressor
Hydraulic Leveling Jacks (2 on Rear, 1 on Front)
Notes from the seller: Rig was built brand new with extra heavy-duty
mast in 1982 for drilling wells on oil pads. Was stored until around
1990 before being put back into operation but rig has worked limited
hours since then. Reliable ready-to-work drill today
Location : USA
| |
| |
|
Id: WR947
 Gefco Speedstar 185K Drilling Rig - For Sale
Worldrigs ID: WR947
Description :
Gefco Speedstar 185K Drill Rig
Top Drive drilling unit
powered by a CAT L-18 Diesel Engine
mounted on a 2007 Kimball Chassis C3100 10x4 - 5 axle back in carrier
Speedstar 61ft foot high mast
185,000 static hook load
hydraulic raised with dual raising cylinders
rocking board and single joint pipe arm
Hydraulic Cylinders to raise and lower top drive
Hoist capacity of 30,000 lbs
Hoist speed to 140 ft per minute
Maximum pull down capacity of 30,000 lbs
Four 60” stroke leveling jacks, two at rear on centerline of bore hole and
two behind carrier cab, all independently controlled
11,667 ft. lbs. of drilling torque
rotation speeds of 0-100 rpm
3” diameter fluid course
Two 8,000 lbs capacity Braden Hydraulic winches substructure
10ft H x 10ft 6” W x 25ft L T-type substructure with two 5 ft wide folding walkways
50” H x 10ft 6” W x 40ft L back on ramp
2008 Ditch Witch Iron Roughneck
Support Equipment :
3000 ft of 3-1/2" Drill Pipe
3500 ft of 4-1/2" Drill Pipe
1500 ft of 4-1/2" heavyweight Drill Pipe
2007 Cherokee 8ft W x 40ft L Dog house trailer with knowledge box,
cabinets, workbench with vise, 12 lockers
2007 Stanton Dynamics Trailer with a marathon 50 kw generator powered
by a John Deere diesel engine and a 95 kw generator powered by a 6-71
Detroit diesel engine
Two MZ-9 Triplex Mud Pumps with Cat 389 diesel engine rated at 1,000 HP each,
type D pressure gauges, pulsation dampeners, charging pumps, quick change,
caps and flowline manifold. 5.5ft Liner – 9ft Stroke – 4274 PSI
5ft H x 8ft W x 36ft L - 255-Bbl Mud suction tank with 11” porch extension,
2 compartments, slant bottom, internal plumbing, 5”x6” centrifugal pump
powered by 50 HP electric motor, brand MA-10 10 HP mud agitator,
chemical hopper, mud hopper, mounted walkways, stairs, safety rails, skidded
5ft H x 8ft W x 40ft L - 285-Bbl shaker tank with 3 compartments, slant bottom,
internal plumbing, mounted walkways, stairs, safety rails, skidded
503 Derrick Equipment shale shaker mounted on pits, powered by
electric motors. With De- sander & De-silter
Regan Torus 9 1⁄2” ID 3000# annular blowout preventer with shafter
LWS 9” 3000# double ram blowout preventer, 16” H Drilling spool
with (3) 2 1/16” 5000# gate valves, and 2 1/16” check valve, koomy type 80,
3-station closing unit, (4) 10-gal accumulator bottles, triplex charging
powered by 10 HP electric motor
Skidded 5,000 gallon fuel tank with 10ft porch. 3 compartment lubester,
storage cabinet.
Location : USA
| |
| |
|
Id: WR934
 Schramm TXD 200 Trailer Mounted Drilling Rig - For Sale
Worldrigs ID: WR934
Description :
2011 Model Schramm TXD200 Unit 139 Ser # J135-0204 Rig Trailer 2011
Kimble Vin 1K9AD40C8B3268121
MTU 12V2000
Sub Base/Mud Boat 1 Piece
Tag Axle 2011 Model Kimble Vin 1K9AL10A7B3268126
Pipe Loader/Loadsafe 2007 Model Unit 6006 Vin 1K9AH54B172268003
Doghouse/Water Tank/Tool Room Unit 7166 2011 22.5 Ton 53ft x 10ft Vin/Ser
1D9SD5323B1664027
4.5" Drill Pipe Slips
6" Drill Collar Slips
8" Drill Collar Slips
A Few Misc Fittings
Location : USA
| |
| |
|
|
|
Id: WR940
 Schramm T450W RC Drill Rig & Support Package - For Sale
Worldrigs ID: WR940 Description :
Schramm T450W RC Drill Rig & Support Package
Reverse Circulation (set up for mineral exploration)
Cummins 200HP Diesel Engine (powers the hydraulic system)
1000 ft includes & handles 20ft x 6"
Extendable rod rack
Rod handling Boom and winch
Wireline winch
2 water injection pumps
Remote hydraulic cooler
Angle/Dump mast
Auto Blowdown
Cyclone
Rods, hammers, spare parts
3 leveling jacks
Mounted on a Ford Truck 6x4
Diff Locks
Note: All parts for compressor that was removed from drill
Also Available as part of the package:
Sullair Compressor 900HX & CAT 15 Diesel Engine
Sullair Compressor 750cfm/350psi DUX & Series 60 Diesel Engine
BM10179 Hurricane Air Booster 4T-276-41B (rated 1400cfm/1000psi)
BM10214 Hurricane Air Booster 4.5T 276-41B (rated 1400cfm/1000psi)
Chevrolet Model : Kodiak
Drill Rods : Metski Drill Rods : 10 | Remet Drill Rods : 29 | Remet Drill Rod Inner Tube : 29
Sample Splitter (Dry) : 2 each
Sample Splitter (Wet) : 1 each
Sullair Air Compressor DC 815/350 C19
20 foot shipping container with alot of parts included
Location : North America
| |
| |
|
Id: WR1023
 Drilling Rig for Sale-1.webp "Derex 1340-12X DR (Dual Rotary) Drilling Rig - For Sale") Derex 1340-12X DR (Dual Rotary) Drilling Rig - For Sale
Worldrigs ID: WR1023
Description :
Derex 1340-12X DR (Dual Rotary) Drill Rig
Truck
Acela Monterra 4×4
No Emission Controls
330HP Caterpillar 7.2L Turbo-Charged Diesel Engine
Full-Time All-Wheel Drive
Allison Automatic 7-Speed Transmission
U.S. Army “Ultra-Reliable” Certification
22″ Ground Clearance
Transfer Case
Namco (oilfield quality)
Safe Shift
Hydraulic System
Bosch Rexroth plus gear pump
Top Head
Variable torque and RPM with 2” thru-hole
0-125 rpm @ 3,500-lbf
Lower drive
Variable torque and RPM with 10” thru-hole
0-23 rpm @ 20,000-lbf
Diverter
Simple seal design with 4” NPT discharge
to control cuttings.
Derrick & Feed System
13ft top head stroke (handles 10ft x 3" OD drill pipe)
40,000-lbs pullback
20,000-lbs pulldown
100 FPM
Derrick slide/ dump
4ft Derrick slide for angles up to 45°
Main Winch
Manual jib
2,500 lb.
Remote on helpers side for winch
Control Panel
Straight hydraulic controls (no electrics to fail)
Marine grade electric switches (for lights)
Murphy engine monitor display
Twin platforms
Leveling Jacks
Four 36” stroke independently controlled
Night Lights
6 LED night lights
Toolboxes
30”x 18” x 18”
Overall Dimensions
Length: 24ft 11”
Width: 8ft 6”
Derrick up height: 24ft 6” – 28ft 6” with Derrick slide
Derrick down height: 11ft
Water Injection
9-GPM FMC injection pump
Gross Weight
28,000lbs - 30,000lbs
Casing
Diameter 4", 5" & 6" (with 8" & 10" option for surface casing)
Pre-Order Drill from EWDAdditional Options
4 – 6 Month Leadtime from Date Ordered
Sand Line Winch
1,500ft sand line
Mud Pump
3x2x13 centrifugal 300 gpm/300 psi
Centerline piston 150 gpm/600 psi
Line Oiler
Many oilers available
Water InjectionDrill Pipe Packages
18 gpm FMC injection pump
Wire Feeder and Box
Hydraulic or Gas Welders
Location : USA
| |
| |
|
Id: WR932
 Schramm TXD 200 Trailer Mounted Drilling Rig - For Sale
Worldrigs ID: WR932
Description :
2011 Model Schramm TXD200 Unit 139 Ser# J135-0204 Rig Trailer 2011
Kimble Vin 1K9AD40C8B3268121
MTU 12V2000
Sub Base/Mud Boat 1 Piece
Tag Azle 2011 Model Kimble Vin 1K9AL10A7B3268126
Pipe Loader/Loadsafe 2007 Model Unit 6006 Vin 1K9AH54B172268003
Doghouse/Water Tank/Tool Room Unit 7166 2011 22.5 Ton 53ft x 10ft Vin/Ser
1D9SD5323B1664027
4.5" Drill Pipe Slips
6" Drill Collar Slips
8" Drill Collar Slips
A Few Misc Fittings
Location : USA
| |
| |
|
|
|
Id: 9000-422
 Brewster N4 on Spencer Harris Drilling Rig for Sale
Worldrigs ID: WR563 Description
Drawworks :
Brewster, Model N-4, Single Drum Drawworks, 650Hp, Lebus Grooved
for 1-1/8" Line, Hydraulic Makeup & Breakout Catheads, Air Driller's Console,
Crown-O-Matic, 8” water cooled brakes,
Compound :
Brewster 2-Engine, In-Line Compound
Brake :
D & H 15" Double Hydromatic Brake With jaw clutch
Drawwworks Power:
No. 1 - CATERPILLAR 3306 Diesel Engine 361HP, S/N 64Z33301
w/ 24 Volt Electric Start, Radiator,Gauges,
ALLISON 955 Torque Converter.
No. 2 - CATERPILLAR 3306 Diesel Engine 361HP, S/N 64Z33298 w/
24 Volt Electric Start, Radiator,Gauges,
ALLISON 955 Torque Converter
Mast:
SPENCER HARRIS 97'H Cantilever Mast, 285,000 Lb. Static Hook Load,
Crown Block w/ (4) 30" Sheave Cluster & (1) 30" Fastline Sheave, 1-1/8" Line,
Racking Board, Tong Counter Weights, Ladder, DerrickClimber, Geronimo,
4" Standpipe & Manifold
Carrier:
SPENCER HARRIS 40'L, Tri-Axle, Dual Wheel Trailer w/ Leveling
Jacks, 57'8"L Back-On-Ramp, Fold Out Walkways, Deadline Anchor,
Safety Rails.
Substructure:
SHOPBUILT 11'6"W x 16'H x 23'6"L Swing Up Substructure w/
Rotary Beams, (Refurbished in 2009)With Certifications, V Door Ramp,
Stairs Safety Rails, Skidded.
Pump: (Primary)
GARDNER DENVER PZ9 Triplex Mud Pump, 1000 Hp. W / Forged
Steel Fluid End, Quick Change Valve & Cylinder Head Caps, HYDRIL
Pulsation Dampener, OTECO 3" Shear Relief Valve, Pressure Gauge,
Charging Pump, V-Belt Drive Assembly, Master Skidded w/ Engine
Pump Power:
CATERPILLAR D-398 Diesel Engine S/N 6685860 w/ Air Start,
Radiator, Gauges, Mounted Pump Master Skid.
Pump: (Standby)
NATIONAL N1100 Duplex Mud Pump, 500 Hp. w/ Forged Steel
Fluid End, Quick Change Valve & Cylinder Head Caps,
HYDRIL Pulsation Dampener, OTECO 3" Shear Relief Valve, Pressure Gauge,
Charging Pump, V-Belt Drive Assembly, Master Skidded w/ Engine
Pump Power:
CATERPILLAR D-398 Diesel Engine S/N 66B5860 w/ Air Start,
Radiator, Gauges, Mounted Pump Master Skid.
Rotary Table
Gardner Denver 27 -1/2" Rotary Table w/ Split Master Bushings,
with raised floor
Swivel
BREWSTER 6S 220 Ton Swivel
Kelly
Kelly, Square drive , 5-1/4" x 37', with Kelly bushing
Kelly Valves
Upper Kelly Valve.
Lower Kelly Valve
Traveling Block / Hook
BREWSTER 175 Ton Block/Hook Combination, with elevator links
Blowout Preventer and Valves
SHAFFER LWS Double gate, Blowout Preventer 13 5/8" X 3,000 psi
13 5/8"Dia. x 30"H x 3 M Drilling Spools. 3,000 Psi. Choke Manifold.
Choke Valves- Kill Valves-
Closing Unit
Closing Unit., 6 station, with drillers control panel
120 Gal 5 station accumulator w/remote
Rig Houses:
Dog House, 10'W x 50'L Doghouse w/ (4) Lockers, Knowledge Box,
Parts Room, Bench Storage, (1) Heater, Air Conditioner, Lights,
Skidded
Shopbuilt 8'W x 25'L Mud House w/ Pump parts Room, Mud Hopper,
Heater, Lights, Skidded.
Utility Houses/Generators:
Utility House, 10'W x 50'L, Electrical Panel, Air Compressor, Transformer
No. 1 - DETROIT 350 Kw. AC Generator
Powered By DETROIT Series 60 Diesel Engine w/ Electric Start, Radiator, Gauges.
No. 2 - CATERPILLAR 234 Kw. AC Generator
Powered By Caterpillar, 3306, Diesel Engine w/ Electric Start, Radiator, Gauges
All above Mounted 12'W x 50'L Utility House w/ Parts Room, Lights, Skidded
Mud System:
Shopbuilt, 10'W x 6'H x 42'L, 432 Bbl. Suction Tank w19' Porch,
(3) Compartment, (3) OILWORKS Pit boss 10 Hp.
Mud Agitators p/b BALDOR 10 Hp. Electric Motors,
Slant Bottom, Internal Plumbing,
Top Mounted Walkways, Safety Rails, Lights, Skidded.
MISSION 5" x 6" Centrifugal Pump p/b TECO 50 Hp. Electric Motor
Shopbuilt 10'W x 6'H x 42'L, 432 Bbl. Shaker Tank w/ 9'
Covered Porch, (4) Compartment,
(1) OILWORKS Pitboss 10 Hp. Mud Agitator S/N 2143 p/b BALDOR 10 Hp.
Electric Motor, Slant Bottom,
Internal Plumbing, Top Mounted Walkways, Safety Rails, Lights, Skidded.
FIVE STAR 5" x 6" Centrifugal Pump p/b TECO 50 Hp. Electric Motor
FIVE STAR 5" x 6" Centrifugal Pump p/b TECO 50 Hp. Electric Motor
FLUID SYSTEMS, Single Screen, Linear Motion Shale Shaker S/N 2314
O'DRILL / MCM, Desilter w/ (8) 4" Cones
O'DRILL / MCM, Desander w/ 2 10" Cones
Water Tank
Shopbuilt 10'W x 8'H x 40'L, 549 Bbl. Water Tank w/Parts Room, Parts
Bins, Lubester, Lights, Centrifugal Water Pump, with Dog house stand
inside, Oilfield Skidded
Fuel Tank
Shopbuilt 8'W x 8'H x 30'L, 13,837 Gallon Fuel Tank w/ (2) Fuel Transfer
Pumps, Oilfield Skidded
Trailers
20' Office trailer w/furniture
Miscellaneous Equipment Including
Approx. 6' X 20' Bubble buster flash tank
1 set type C tongs w/heads
12" x 400 x 10" crossover spool
41 Misc. handling and crossover subs
Wire line unit XCE serial # 01 006N4
2 pin ROP and weight indicator
2 sets slips
400K weight indicator
2 sets elevators
3" Marlow trash pump
| |
| |
|
Id: WR996
 CME 55 Drilling Rig - For Sale
Worldrigs ID: WR996
Description :
CME 55 Drill Rig - Serial Number: 130085
Moyno-type Water Pump
Cathead
Winch
Auto Hammer Driver installed by CME
Ford Gas Deck Engine
Hydraulic operator controls
Hydraulic Leveling Jacks
Mounted on single-axle 1978 International 1600 truck - VIN: D0512HHB33188
Gas engine
manual transmission
Location : USA
| |
| |
|
Id: WR1022
 Brand New Massenza Hydraulic Drilling Rig Model Mi5 Mounted On Tracks (Crawler)
Worldrigs ID: WR1022 Description :
Used for water well research, geological findings, mineral research
and geothermal applications.
Work Methods:
Rotary drilling with direct circulation by Water, Mud, Air or Foam
Down the Hole Hammer Drilling
Auger Drilling
Core Drilling
Main Framework:
Made out of electrically welded high quality steel S 355 JR.
N°4 hydraulic stabilizers of which two are fixed and the other
two can be manually widened for the levelling and positioning
of rig, complete with check valve.
Control Panel:
Fixed control panel, complete with valves, distributors, pressure
gauges, reading gauges for pull-up, pressure thrust on drill battery,
balancing system, diesel engine control.
Diesel Fuel Tank: capacity 30,4 US Gallon.
Maximum Drilling Depth with mud pumps is : 210 mts (690 ft).
| |
| |
|
|
|
Id: 9000-295
 National 1625 New Drilling Rig - 3000 hp - for Sale
Worldrigs ID: WR24 Description :
National 1625 30,000' Drilling Rig
New Build 3000 HP, SCR, 30,000' Drilling Rig
I. Hoisting Equipment
The OEM (original equipment manufacturer) 1,500,000 lb low lift cantilever mast and winch
raising parallelogram substructure has a 3000 hp rating and can transport in less than 10 loads.
A. OEM 1,500,000# Cantilever Type Mast :
152' X 30' -0" Base beam cantilever mast. Mast hook load capacity of 1,500,000 lb
with14 lines strung to traveling block. Mast designed per A.P.I. Specification 4F.
- Crown block complete with 7-60" fabricated cluster sheaves and 1-60"
fabricated fast line sheave, tapered roller bearing. Shaft drilled for grease
fittings, line guards, crown safety platform and handrails.
- Adjustable racking board with a capacity of 363 stands of 5" drill pipe and 12
stands of 9" drill collars, complete with working platform, floor slab and 7'
high handrails. Racking board complete with Emergency escape.
- Full-length ladder assembly.
- Two (2) derrick boom kits designed to support 5,000 lb load, complete with
boom, attachments, and 8" sheaves (2 per kit) grooved for 9/16" wire line.
- Set of tong counter weights (2 per set) complete with buckets, guide, blocks
and lines.
- Raising line set complete with sling line equalizer.
- Set of standpipe clamps to accommodate 5 1/2" O.D. standpipes.
- Set of shim-type adjustable front and rear shoes, complete with shims
- Leg mounted deadline anchor with 100,000# deadline load with brass for drill
line size.
- Set of assembly bolts and pins.
B. "New" OEM 30' -0" Parallelogram Substructure :
The substructure has a 30' -0" working floor height, a rotary capacity of 1,500,000 lb
and a setback capacity of 1,000,000 lb. It is manufactured with a rigid box type
design with eight legs to insure stability.
- The substructure transports in three compact loads.
- Substructure to accommodate a cantilever type mast.
- Clear height under rotary beams to be approximately 25' -0".
- Substructure complete with :
- Diamond plate flooring on working floor area not covered by
machinery or setback pad.
- Flooring and handrails surround working floor.
- Substructure accommodates a 37½ ." rotary table with
independent drive. The independent rotary table is built into the
center steel and does not have to be removed during rig moves.
C. Drawworks :
- Model - "Rebuilt" National 1625 UE
- Rated Horsepower - 3000
- Drilling Line - 1-5/8"
- Sand Line - Not Required
- Auxiliary Brake - Baylor 7838
- Crown Protection - Crown-0-Matic
- Power - Three (3) DC Motors GE 752 (1000 HP each intermittent, 750 HP
continuous)
- Brake Radiator - Heat Exchangers & Brake
- EZ-Torque Type -1
- Circulation Tank
- Automatic Driller - Martin Decker Satellite
D. Substructure Accessories :
- B.O.P Handling System - Tracking beams mounted in the substructure
with two (2) Ingersol-Rand 25 Ton Air Hoists
- 32' Telescoping Headache Rack
- Rig Floor Stairways - All stairs to meet OSHA standards with no slip
grip strut stair treads.
- Three (3) 30' -0" stairways from substructure floor to ground
level. Stairs to be built on a 45-degree angle.
- One (1) 20' -6" stairway from top of the substructure to top of
trip tank. Stairs to be built on a 45 degree angle.
- V-Door Ramp - Ramp to be fabricated to work with a 30-0" floor
height substructure and a 42" catwalk. Ramp to be fabricated with ½"
plate and 3" pipe guides.
- Doghouse - House to be fabricated on an oilfield type skid with
loading hitches on both ends for tailboarding. House to have checker
plated flooring, v-crimped wall construction, and an arched type roof.
House complete with the following :
- 4' -0" porch on both ends
- 2' -0" walkway on the back side of the doghouse running to full
length.
- Handrails around house perimeter.
- One sliding doorway to rig side.
- Two swing type doorways on both ends with windows built in.
- Two (2) windows on the back side wall
- Knowledge box
- Four compartment work bench
- Self Sufficient Diesel Electric Hydraulic Power Unit
- 70 GPM @ 3000 PSI CAPABLE
i. Heavy duty steel skid and frame (with 7' x 6' x 18" storage
basket); lifting eyes, loading hitches (both ends), and fork pockets.
Skid is 7' - 6" wide x 16' long x 86" tall.
ii. 450 gallon reservoir, clean out cover, sight level gauge, vent
breather filter, and thermometer.
iii. 75 gallon diesel tank, clean out cover, vent breather filter. (Supply
diesel engine)
iv. 145 hp John Deere Diesel engine / 70 gpm pressure compensated
piston pump. (Main pump backup)
v. 125 hp - 1800 rpm - Electric motor / 70 gpm pressure
compensated piston pump. (Main pump)
vi. 20 gpm vane pump. (Filter / Heater circulation pump)
vii. Heavy duty Nema 4 combination motor starter / disconnect and
DC to DC converter for operating the valve controls. (100 hp)
viii. Pressure - Return - and - Circulation Filters w/ visual indicator -
5 micron high efficiency synthetic elements.
ix. 2 kw - 110 vac circulation heater.
x. Suction ball valves / outlet check valves for pump isolation.
xi. In line hydraulic flow meter and pressure gauges for diagnostics.
xii. System safety relief valve.
xiii. Circuit breaker panel for heater / valve stand operation.
xiv. All hoses / fittings 3000 psi operating pressure rated.
xv. Quick disconnect panel (utilizing Stucchi threaded style) for easy
connection from HPU to Rig.
xvi. System is pre-ran and tested, with a documented cleanliness level
of ISO 17/15/13 as a minimum.
xvii. Description of "Heavy Duty" Winch up rig Hydraulic Controls
1. Custom valve stand (attached and integral to the HPU) with
(2) station manifold and all associated valving for the
following functions:
1) (2) Substructure Raise / Lower (winch control with
individual proportional speed adjust)
2) (2) Supply and Return Connections for accessory
functions.
3) Electrical control panel w/ Power supply, and all
other required electrical components.
4) Radio remote control and hard wired selector
switches for back-up control.
2. Substructure will raise and lower level and system will allows for
individual winch operation if they are out of level. Sub will raise in
12 - 15 minutes. All functions have adjustments for speed control,
if a different speed is desired.
D. 750 Ton Traveling Block (as per API SPEC. 8A / 8C) :
i. Canrig Model B-7-60-750.
1. API load rating: 750 ton.
2. Sheaves grooved for 1½" wire.
3. Number of sheaves: 7
4. Diameter of sheaves 60".
E. Drilling Line
7500 ft of 1 5/8" class 6 x 19 EIPS-IWRC cable c/w hospel
F. Drill Line Spool
a. One (1) Air operated drill line spool complete with air motor, gear system and
chain guard.
II. Prime Mover Drive
A. SCR System (5 Bay) :
One (1) International Electric Company SCR House. The I- Drive System will be
manufactured by IEC Systems LLC and designed and equipped to control and power
the following loads:
- Five (5) A/C Engine/generator sets
- One (1) 3000 hp Drawworks, driven by three (3) x 1000 hp (Series) DC Motor
- Three (3) x 1600 hp Mud Pumps, each driven by two (2) x 1000 hp (Series)
DC Motors
- One (1) 1000 HP Independent Rotary Drive
- Top Drive Feeder
B. Lighting System :
Heavy Duty explosion proof Fluorescent and Mercury Vapor Lightning System
designed to use with Mast and Substructure, Mud System, complete with Plug,
Receptacles, Cable, Cable Clamps and all necessary Leads and fitting. Lighting
System consist of: Mast and Racking Platform, Substructure Lighting, Mud Tanks
and Mud Pumps, and Utility House, including Battery emergency light at Driller' s
console certified for Class 1 Division 2.
C. Engine/Generator Package :
Engine/Generators - Five (5) New Mustang/Caterpillar Model 3512C with Direct
Injection Turbocharged and Separate Circuit After cooled Land Electric Diesel
Engine, Rated 1476 H.P. at 1200 R.P.M. 2007 EPA Non-Road Emission Certified,
with the following standard attachments as listed below :
- Air Inlet System
- Aftercooler core, corrosion resistant
- Air cleaner, regular duty, with soot filter
- Service indicators
- Control System
- ADEM II or US Equivalent Electronic engine control, left hand.
- Requires 24V DC 10 AMP continuous, 20 AMP intermittent, clean
electrical power.
- Radiator Cooled Land Based:
- Outlet controlled thermostat and housing
- Jacket water pump gear driven
- Dual outlet
- Aftercooler fresh water cooling pump (SCAC), gear driven centrifugal.
- SCAC pump circuit contains a thermostat to keep the aftercooler
coolant from falling below 30 deg C (85 F).
- Exhaust System
- Exhaust fittings, flexible, 203 mm (8 in)
- Exhaust flange, weldable, 356 mm (12 in)
- Exhaust manifolds, dry
- Dual turbochargers with w/c bearings
- Flywheels and Flywheel Housings
- Flywheel, SAE No. 00
- Flywheel housing, SAE No. 00
- SAE standard rotation
- Fuel System
- Fuel filter
- Fuel transfer pump
- Flexible fuel lines
- Fuel priming pump, left hand
- Electronically controlled unit injectors
- Instrumentation
- Electronic Instrument Panel, left hand
- Analog gauges with digital display data for:
- Engine oil pressure gauge
- Engine water temperature gauge
- Fuel pressure gauge
- System DC voltage gauge
- Air inlet restriction gauge
- Exhaust temperature (prior to turbochargers) gauge
- Fuel filter differential pressure gauge
- Oil filter differential pressure gauge
- Service meter (digital display only)
- Tachometer (digital display only)
- Instantaneous fuel consumption (digital display only)
- Total fuel consumed (digital display only)
- Engine start-stop (off, auto start, manual start, cooldown timer)
- Lube System
- Crankcase breather, Oil cooler, Oil filter, Shallow oil pan
- Oil pan drain valve, 2' NPT female connection
- Lubricating oil, SAE 10W30, Caterpillar DEO (CG4) 643L or
equivalent.
- Mounting System
- Rails, mounting, floor type, 254 mm (10 in)
- Power Take-Offs
- Accessory Drives
- Upper RH, Lower left-hand Front (available for PTO usage)
- Front Housing, Two-sided
- Protection System
- ADEM II or Equivalent monitoring system provides engine de-ration,
alarm, or shutdown strategies to protect against adverse operating
conditions. Selected parameters are customer programmable.
- Status available on engine-mounted instrument panel and can be
broadcast through the optional customer communications module or
programmable relay control modules(s). Initially set as follows :
- Safety shutoff protection, electrical - oil pressure, water
temperature, overspeed, crankcase pressure, and aftercooler
temperature.
- Air inlet shutoff, activated on overspeed or emergency stop.
- Alarms, electrical - ECM voltage, oil pressure, water
temperature (low and high), overspeed, crankcase pressure,
aftercooler temperature, low water level (sensor is optional
attachment), air inlet restriction, exhaust stack temperature,
filter differential pressure (oil and fuel).
- Derate, electrical:
- High water temperature, Crankcase pressure, Aftercooler
temperature, Air inlet restriction, Altitude, Exhaust
temperature.
- Emergency stop push button, located on instrument panel.
- Alarm switches (oil pressure and water temperature) for
connection to customer supplied alarm panel. Unwired.
- Starting System
- Air starting motor, right hand, 620 to 1034 kPa (90 to 150 psi),
left hand control.
- Air silencer
- General
- Paint, Caterpillar Yellow
- Vibration damper and guard
- Lifting eyes
b. Generator - Caterpillar SR4B 1750 KVA or Volvo generator, two bearing,
1225 KW, 867 frame, .7 PF, 600 volt complete with Stator RTD' s, Space
heater, Bus bar and cable access box.
c. Radiators - Conventional style Split Core Radiator (56 sq. ft.) with two
circuits for engine jacket water and after-cooler. Includes: 78" Blower fan, fan
drive, fan pulleys, belt guard, fan guard, fuel cooler and Water connections.
d. Master Skids - Five (5) Two-runner oilfield type skids (40' x 10' -0" x
18") with loading hitches on both ends for tail boarding. Skids to
consist of the following:
- Completely covered with ." check plate
- Drilled and tapped plates for removable arched type roof
connections.
- Drilled and tapped plates for removal of engine pony skid.
e. Roofs - Removable arched type roofs (38' -0" x 10' -0" x 12"). Roofs
to consist of the following:
- Six (6) T.S. 4" x 4" x ¼" support legs with bolt hole patterns to
fit tapped holes on skids. Leg supports complete with square
tubing diagonal supports for stabilization.
- Two (2) hinged channel running the length of the roof to
prevent rain run off. Channels cut in 5' -0" sections for easy
handling and located between each engine package.
III. Rotating Equipment
A. "New" 37½" Rotary Table and Accessories :
i. American Block Model RK-375. Rotary table with 37½" table opening,
Complete with:
1. HMB Hinged Pin Drive Master Bushing assembly, complete with
API No. 3 (33) insert bowl, bit breaker adapter plate and sling for
37½".
2. No. 1 bowl for 13 3/8" and 11¾" pipe.
3. No. 2 bowl for 10¾" & 9 5/8" pipe.
4. 27 RPH Kelly Bushing complete with wrench less wiper assembly
for 5¼" hex.
5. 3½" RPH/RSH square kelly roller assembly.
6. 37½" X 20 & 18 5/8" SCB split casing bushing for 37½" .
7. 20" CL casing slip complete with buttons.
8. 13 3/8" CL casing slip complete with buttons.
9. 9 5/8" CL casing slip complete with buttons.
10. 5½" RDL extra long rotary slip complete with inserts.
11. 3½" X 2 7/8" medium long rotary slip complete with inserts.
ii. Independent Rotary Drive
1. National C-700 Transmission
2. One (1) 752 Traction Motor
3. Chain Driven
4. Incorporated into the one-piece center steel.
IV. Circulating Systems
A. Mud Pumps :
i. Three (3) "New" Gardner Denver PZ-11 Mud Pumps, 1600 HP, Liners 6¼" x 12", 643 gpm
each @ 3200 psi driven by 6 each GE-752, 1000 hp
traction motors, furnished with:
1. Unitized on a two-runner oilfield type skid with loading hitches on
both ends for tailboarding.
2. Steel traction motor subbase with two (2) adjustable motor base
plates.
3. Two (2) "New" 752 Series wound DC traction motors. Each motor
to include a 15 HP Blower and junction box with lock out switch.
4. High pressure pulsation dampener, 5000 psi.
5. 3" Relief Valve, manual reset, 1500-5000 PSI with flange
connection.
6. SPM meter (0-200)
7. Pressure gauge, 0-5000 PSI range with flange connection.
8. Pressure and Suction Manifold
9. Discharge strainer block.
10. Suction Strainer.
11. Centrifugal charging pump 5 x 6 with mechanical seal and hard
iron material, all mounted on a mission fabricated steel base with
woods style coupling, OSHA type coupling guard and a 75 HP
1750 RPM, 3 PH, 230/460 Volt, 60 Hz explosion proof electric
motor.
B. 2500 BBL Round Mud System(1500 Active System: 1000 BBL Reserve
System)
a. 2500 bbl, Five (5) tank round bottom mud system with all piping
valves and fittings for standard operation. Mud System complete with:
- Active and Reserve System
- Mud Mixing System
- Interconnecting Piping for the Following Equipment:
- Six (6) Mission Magnum 6 x 5 x 14 magnum with a
10.5 inch impeller, mechanical seal and hard iron
material, all mounted on a mission fabricated steel base
with woods style coupling, OSHA type coupling guard
and a 75 HP 1750 RPM, 3 PH, 230/460 Volt, 60 Hz
explosion proof electric motor.
- Nineteen (19) Derrick DE-AG-10 Agitators complete
with 10 HP, 1800 RPM explosion proof C-face motor
bolted to a gear box. Including shaft stabilizer, shaft
and impeller.
- Two (2) Derrick DE-AG-15 Agitators complete with 15
HP, 1800 RPM explosion proof C-face motor bolted to
a gear box. Including shaft stabilizer, shaft and
impeller.
- One (1) Derrick 503 Mud Cleaner complete with :
a. One (1) 3 cone desander
b. One (1) 20 cone desilter
- Two (2) Hopper with venturi.
- One (1) Derrick Vacuum degasser 1200 GPM. Skid
mounted with heavy duty 3 HP explosion proof
230/460 volt, 60 Hz, 3 Ph, 1800 RPM motor and
manual starter with heavy duty vacuum pump.
- Three (3) Derrick Flo-Line Cleaner 503 Shale Shakers
with Weir Feed complete with three panel screen frame,
support structure, and explosion proof electrics with the
following options :
a. A.W.D. (+7 deg uphill to - 1 deg downhill)
b. Standard Screen Underflow hopper
c. Weir Feed
d. Super G Vibrations Motors
e. Single side tensioning system
C. Combo Skid
a. Combo skid to be fabricated on a three-runner oilfield type skid with
loading hitches on both ends for tailboarding. Skid to include the
following:
- Trip Tank - One (1) 100 bbl trip tank. Tank to include the
following :
- Galvanized grating on top of tank.
- Skid porch with provisions for mounting:
- One (1) 2 x 3 x 30 HP centrifugal pump
- Brake Water Tank - One (1) break water tank. Tank to have the
following :
- Tank bottoms to be 3/8" plate.
- Tanks constructed with ¼" v-crimp.
- Tank rims to be 4" square tubing.
- Top of tanks, overhead walkway, top of skid
covered with ¼" plate.
- Cleanout, access ladder, and man way
- Provisions to mount:
- Two (2) 2 x 3 x 25 H.P. centrifugal pumps
- Heat exchanger
- Safety alarm package.
- Choke Manifold Skid
Provisions to mount one choke manifold.
D. 48" Mud Gas Seperator
a. Mud gas separator complete with:
- 48" Pipe with weld caps on both ends.
- Internal baffles.
- All piping and pipe brackets.
- Gas buster to elevate to working condition to allow operation
under half full conditions.
- Gas buster to be mounted in lay down position for transport
and to be raised by truck for operation.
V. Blow Out Preventer
A. Choke and Kill Manifold :
a. Choke and Kill Manifold Assembly, Kill Line Valve Assembly, and Choke
Line Valve Assembly
b. (3) Gate Valve, 4-1/16''10,000psi, Cameron Style, FC, Manual Operated.
c. Gate Valve, 4-1/16'' 10,000psi, Hydraulically Operated, DFC
d. (9) Gate Valve, 2 1/16" 10,000psi, Cameron Style, Manually Operated,
Flanged End
e. Studded Cross, 2 X 2 X 2 X 2, 10,000psi
f. Studded 5-Way Cross, 4-1/16" 10,000psi X 4-1/16" 10,000psi X 2-1/16"
10,000psi X 2-1/16" 10,000psi X 2-1/16" 10,000psi, with B7 Studs and Grade
2H Nuts.
g. Spacer Spool, 2 1/16" 10,000psi Flanged x 2 1/16" 10,000psi flanged.
h. Adapter Spool, 2-1/16" 10,000psi, Flanged End X 2-9/16"10,000psi, Flanged
End.
i. Check Valve, 2-1/16" 10,000psi, DVI, Model R, DD Trim, Temperature Class
P-U, PSL 2, PR1, Flanged End.
j. Adjustable Choke, 2-1/16" 10,000psi, DVI, Model H2, Manually Operated,
EE Trim, Temperature Class P-U, PSL 2, PR1, 2" Maximum Orifice, Flanged
End, Stainless Steel Lined Ring Grooves.
k. Double Studded Adapter, 2-9/16" 10,000psi X 2-1/16" 10,000psi, with B7
Studs and Grade 2H Nuts.
l. Double Studded Adapter, 4-1/16" 10,000psi X 2-1/16" with B7 Studs and
Grade 2H Nuts.
m. Hydraulic Choke, 2-9/16'' 10,000psi, SWACO Style, Super Choke, EE Trim ,
Temp Class P-U, Flanged End with Stainless Steel Lined Ring Grooves.
n. Spacer Spool, 4-1/16" 10,000psi X 4-1/16" 10,000psi 12" Tall.
o. Buffer Tank Assembly, Shell Test 15,000psi, Working Pressure
10,000psi,Main Tube 9" OD X 7" ID 4130 Mechanical Tubing, with two 4-
1/16" 5,000psi Studded End Caps, two 2-1/16" 10,000psi. Flanged Inlets, One
4-1/16" 10,000psi Flanged Inlet connected to a 4-1/16" 5,000psi Flanged
Outlet by utilizing 6" OD X 4" ID Tube that isolates this" Panic Line" from
the remainder of the buffer tank, Two 2-1/16" 5,000psi Extended Flanged
Outlet. Heat Treated.
p. Flanged Mud Gauge, 2 1/16" 10,000psi, Cameron Style, Model F, Range 0-
10,000psi.
q. (2) Adapter Flange, 2-1/16", 10,000psi X 2" Figure 1502 Female Threaded
Half with Seal.
r. (2) Blind Flange, 4-1/16" 5,000psi.
s. Blind Flange, 2-1/16" 10,000psi
t. (2) Target Flange, 2-1/16'' 5,000psi, Lead Filled.
u. Blank-n Plug, 2-1/16'' 10,000psi X 1502 Union, Male Half.
v. Hammer Nut, 2'' 1502 Union
w. (5) Ring Gasket, BX155, Stainless Steel.
x. (19) Ring Gasket BX152, Stainless Steel
y. (2) Ring Gasket RX153
z. (2) Ring Gasket R39 Stainless Steel
aa. (88) Stud, 3/4'' X 5-1/2'' B7, w/ 2 Grade 2H Nuts Each,2-1/16" 10M
bb. (24) Stud, 1-1/8'' X 8- 1/4'', B7 w/ 2 Grade 2H Nuts Each, 4-1/16" 10M
o. (24) Stud, 7/8'' X 6-1/4'' B7, w/ 2 Grade 2H Nuts, 2-9/16" 10M, 2-1/16" 5M
B. B.O.P. Stack (All items are rebuilt at an API certified facility. Data books and
test charts included. These BOP are NON-H2S SERVICE)
a. 13 5/8" x 10M Shaffer SL Double with 4 x 4 1/16" outlets
b. 13 5/8" x 10M Shaffer SL Single with 2 x 4 1/16" outlets
c. 13 5/8" x 5M Shaffer spherical annular with 10M flanged bottom and studded
top.
C. Accumulator Unit - 7 station closing unit with 2 remotes, 1 each 150' and 1 each 60'
umbilical for 10K Stack.
i. 24 each new 11 gallon accumulator
ii. 3 each new 60:1 pneumatic pumps
iii. 1 each new triplex pump with 1 ." plungers
iv. 1 each new 30 HP Motor
v. 1 each new Barksdale electric hydraulic pressure control switch.
vi. 2 each new 1500 PSI pressure regulators
vii. 7 each new 1" Barksdale selector valves
viii. 1 each new 1" Barksdale bypass valve (high/low pressure)
ix. 8 each new 3 x 4 air cylinders (select valves)
x. 3 each new 6" glycerin filled pressure gauges (1 x 3000psi, 2 x
6000psi)
xi. 1 each new pneumatic/hydraulic pressure switch
xii. 3 each new directional check valves (1 x 1", 2 x ½")
xiii. 2 each new 3500 psi pressure relief valves
xiv. 1 each 16-function fixed plate
xv. 5 each new 1" 3000 psi ball valves
1 each new moisture separator and oiler (air inlet)
VI. Utilities
A. Air Compressor & Receiver :
a. Two (2) Gardner Denver, ST-50, Electra-Saver II, rotary screw air
compressor, Model EBE99Q. 50 HP, 460 volts, 3 phase, 60 HZ, TEFC,
with NEMA 4 Control Enclosure.
b. Two (2) Steel Fab, 400 gallon, vertical air receivers with full skirt, 200 psi
working pressure. Part # A12614. Unit is California Coded.
c. One (1) Gardner Denver - 9 HP Cold Start.
d. One (1) RNC250 air dryer for 250 CFM.
B. Air Hoist - Two main rig hoists for rig floor.
a. Ram Winch Model K10UL20MX1G - 8000lb Rig Winch
b. Ram Winch Model K5UR50DML14AM1G - 5000 lb. Man Rider Winch.
C. Derrick Board Winch
a. Derrickman winch, 2500 lbs working capacity.
D. BOP Handling System
a. Ingersoll-Rand - 50 Ton BOP Handling System consisting of 2-25 Ton Air Hoists
equipped with hand geared trolleys, 30' of lift.
VII. Instrumentation
A. Drift Indicator - Totco Double Recording Drift 0 to 8° and 0 to 14°. Clock
complete with following:
i. 1 ea. Godevil Kit
ii. 1 ea. Chart tool & Chart Reader
iii. 1 ea. Tool Maintenance Box w/ Tool
iv. 100 ea. Chart 0 to 8° and 0 to 14°
v. 10 ea. Rubber Finger Stabilizer
vi. Fishing Tool 7 rope sockets
B. Indicator/Gauge & Counter - EMS-2 Rotary Torque indicator, Weight
indicator, Tong torque gauge, Circulating pressure gauge, two (2) ea.
Pump stroke counter.
C. Drilling Recorder - EMS-2 Drilling recorder, 5 pen (weight, torque,
penetration rate, pump pressure, rotary rpm). (ada di 103 dan kurang 6
buah Printed Circuit Board).
D. PVT - EMS-2 Pit volume totalizer, single channel with audio alarm and
warning lights, four pit transmitters totalizing relay, gain and loss gauge
with gauge zero device. Full digital instrumentations.
E. Flow-Shoe-Device - EMS-2 Device complete with recorder and alarm
system.
VIII. Fabrications
A. "New" Accumulator/Junk Box
Material and labor to fabricate one (1) accumulator/pipe bend skid as per our
conversations. OEM to fabricate a three runner oilfield type skid (40' x 10' x 12")
covered with ¼" check plate. Pipe bend fabricated out of customer furnished drill
pipe. Piping to be done during rig up. Skids complete with:
b. One (1) arched type roof with T.S. 4"x 4"x ¼" legs and gussets plates welded
on roof and flooring for support
B. "New" Warehouse/Workshop
Material and labor to fabricate one (1) Warehouse/Workshop. Shop fabricated on
oilfield type skids with loading hitches on both ends for tailboarding. Skid to be
covered with ¼" check plate. Workshop complete with the following:
c. Work Table
d. Work Bench
e. Storage Compartments
f. Storage Shelves.
C. One (1) 500 bbl Water Tank
Material and labor to fabricate one (1) 500 bbl water tank as per our conversation.
Tanks fabricated on oilfield type skids with loading hitches on both ends for
tailboarding. Skid ends to be covered with ¼" check plate. Tanks complete with the
following :
- Two (2) 3 x 2 x 11 Centrifugal pumps with 25 HP Motors
- Suction and Discharge Piping.
- Two (2) ladder rung to top of tank (In and Out)
- 4" Fill cap
- 2" Outlet
- 1" Drain
D. Two (2) 12,000 Gallon Fuel Tank
Material and labor to fabricate two (2) 12,000 gallon fuel tank as per our
conversation. Tanks fabricated on oilfield type skids with loading hitches on both
ends for tailboarding. Skid ends to be covered with ¼" check plate. Tanks complete
with the following:
g. Two (2) fuel transfer pumps
h. One (1) filter system. Raycor or equivalent
i. Suction and Discharge Piping.
j. Two (2) ladder rung to top of tank (In and Out)
k. Top and Side man ways, 4" Fill cap, 2" Outlet, and 1 ½" Drain
E. "New" One (1) Catwalk
Material and labor to fabricate one (1) catwalk as per our conversations. OEM
to fabricate catwalk (50' x 5' -0" x 18") with 18" channel main runners, 6"
channel cross members, and covered with ½" plate. Catwalks complete with
3' drill pipe screwed in on one end.
F. "New" Cable Trays
Material and labor to fabricate one (1) lot of cable trays as per the following:
Cable trays to be fabricated as follows:
l. Two (1) 40' -0" sections from substructure to fuel tank
m. One (1) 35' -0" section from mud tanks to main tray
n. One (1) 20' -0" section from substructure to main stairs
o. Cable trays complete with the following:
- Hinged doors in 5' -0" sections with chain for each doorway
- Flat expanded metal running the length of each tray
- ½" round bar at each end of cable tray to provide protection
when pulling wires.
H. "New' Vibrator Hoses
i. Four (4) 3 ½" x 12' long, 5000 psi wp with 4" welded connections. For
connection of mud pumps to substructure high pressure line.
I. "New" Rotary Hose
ii. One (1) 3 ½" x 75' , 5000 psi wp with 4" welded connections. Complete
with safety clamps, chains and hammer unions on each end.
J. "New" Wire Line Unit
iii. Five Star surveyor wireline unit with 15 HP, 1800 rpm, 480 volt, 3-phase,
60 HZ Explosion proof motor, complete with one (1) line guard , counter
and 20,000' of .108 wireline.
IX. Rig up and Testing
A. Structural set and assemble :
a. Mast and Substructure
i. Mast accessories.
ii. Install flooring, handrails, v-door, stairs, etc.
iii. Fabricate and install flow line.
b. Rotary Table and independent drive
c. Drawworks
d. Doghouse
e. SCR control panel, foot pedal and drawworks console.
f. Mud Pumps
g. Brake water/trip tank
h. Fuel Tanks
i. Cable Trays
j. Engine package.
k. Accumulator/Junk basket
B. Piping, Fittings, hoses, valves, etc.
a. Water Supply
i. Rig Floor
ii. Brake water system
iii. Feed and return lines from brake water tank to drawworks drum
and brake.
b. Fuel System
i. Feed and return lines from tank to engine set.
c. Air System
i. Air Supply for accumulator unit and rig floor
ii. Hose connections from rig floor air manifold to drawworks control
console and air hoist.
iii. Miscellaneous
1. Two (2) rig floor air hoists and stands.
d. High Pressure piping.
i. Supply and Install dual standpipe, standpipe manifold and all
necessary high-pressure lines and hoses.
ii. Cameron or equivalent 5000 psi wp dual stand pipe manifold
complete with gate valves, pressure gauge of 5000 psi rating and
other standard fittings.
iii. 5" x 5000 psi wp dual stand pipe of suitable length with clamps
installed on the off-drillers side. Complete with gooseneck,
hammer union or unibolt couplings for making up a rotary hose
with the safety clamp attached. All weld type fittings.
iv. 5" x 5000 psi wp dual stand pipe manifold with connections for
pressure gauge, kill line, cellar jet line with two (2) 2" x 5000#
valves and one (1) 5000 psi pressure gauge. All welded type
fittings.
v. Rig pump delivery manifold shall be connected to the vibrator
hoses through a rigidly supported strainer cross.
vi. A 5000 psi working pressure gate valve on each mud delivery
manifold. From each pump delivery manifold, a suitable bleed line
and valve should be provided.
vii. Necessary anchoring arrangement of all high-pressure delivery
lines to be provided.
e. Electrical Rig Up
f. Testing
i. Fill mud tanks with water
ii. Provide lube products to all machinery
iii.Provide 1000 gallons diesel fuel
iv. Run drawworks
v. Run rotary table
vi. Circulate water throughout mud system
vii. Run air compressors and pressure test air manifold
viii.Pressure test all high pressure lines and connections to
working pressure
ix. Pressure test all low pressure line to working pressure
x. Circulate through high pressure system for minimum of four hours
xi. Run all solids control equipment
xii. Load test generators
xiii. Run all generator sets in parallel
xiv. Test all SCR assignments
xv. Rig-down and load-out customer-furnished trucks.
xvi. Drilling rig components to be blasted, primed with
epoxy primed and top coated rig down
X. Documentation, Manuals, Warranty Certificates, and API Certifications
All manufacturers' warranties for each individual component will be included with the rig upon
delivery.
XI. Options :
A. "New" Portable 750 TON AC Top Drive Drilling System
Top Drive Unit - CanRig Model 1275AC
- Local Blower System
- Control Console c/w Advanced Diagnostic System
- TO Support Unit - Standard Compact - 150ft standard cable allowance
- Electrical Interface Materials for TDSU Applications
- TDSU Supply Cables - 100 ft standard
- Torque Guide - Folding
- Services, Self-Contained
- Interface Materials - Mechanical:
- Crown Hanger
Note: CanRig to supply required hardware materials.
- Harpoon
- Torque Reaction Assembly
- Control Valve Configuration
- Tool Joint & Stabbing Guide Kit,
- Remote Actuated Lower Well Control Valve Assembly (4")
- Complete Assembly M&M Valve and Can rig Actuator
Delivery: Ninety to One Hundred Twenty (90-120) days from receipt of purchase order and
down payment.
| |
| |
|
Id: WR957
 Ingersoll-Rand DM50 Crawler Drilling Rig - For Sale
Worldrigs ID: WR957
Description :
1980 Ingersoll-Rand DM50 Crawler Drill Rig
S/N: 20194R
Detroit 12V71 N Diesel Engine - Rebuilt 1000 Hours ago
IR XL1050 cfm / 150 psi Air Compressor
T5 Top Head Power Drive
Gold Cup Main Pumps
10 GPM Water Injection
Dust Collector
4 of 5-1/2” Drill Pipe
Rebuilt By Ingersoll-Rand
Note: Currently being parted out, let us know if you want part prices
Location : USA
| |
| |
|
Id: WR813
 Victory Trailer Mounted Telescopic Mast, Double Rig for Sale
Worldrigs ID: WR813 General Description
Make : Victory
Year Built/Rebuilt : 2009
Estimated Drilling Depth : 12,000 ft
Estimated Rig Move Loads : 48
Estimated Camp Move Loads : 4
Rated HP : 850
Mast
Height : 105.00 ft
Static Hook Load Capacity : 350,000 lbs
Mast Racking Capacity : 12,000 ft
Substructure
Style : Telescoping
Height : 20.00 ft
Clear Height : 17.00 ft
Casing Capacity : 440,000 lbs
Maximum Setback Load (lbs) : 375,000
Drawworks
Make : TSM
Power Rating : 850 hp
Brake Type - Band or Disc : Disc
Drilling Line Size : 1 1/8"
Auxillary Brake : TSM 236H SSB 90#RL W/CVCP
Top Drive / Power Swivel
Make : Victory Rig Equipment
Model : VRT200H
Capacity : 200 Ton
Torque - Continuous : 16,000 ft-lb
Swivel
No Swivel
Rotary Table
Make : TSM 17.5
Table Opening : 17 ½"
Maximum Load Rating : 150 Ton
Power Generation
Engines : 3 ea Caterpillar C 32
Generators : 3 ea Caterpillar SR 4 B
SCR / VFD / DC/DC : VFD Rig
Mud System
Mud Pumps :
2 ea Weatherford Oil Tools MP-10
1,000 hp @ 140 spm
Model : TSM 850
Pressure Rating : 5,000 psi
Reserve Mud Volume : 0 bbls
Shale Shakers : 2 ea MI Swaco Mongoose
Mud Cleaner : N/A
Desander : Brandt 10" X 2 Cones
Desilter : Brandt 5" X 16 Cones
Centrifuge : N/A
Well Control
Annular : 11" 5,000 psi, Doyles Valves,
Single Ram Preventer :
11" 10,000 psi,
Doyles Valves, Type-U
Choke Manifold :
Weatherford oil tools
4 1/16" 10,000 psi
BOP Closing Unit :
T3 Energy Services
6 Station 3,000 psi"
Enhancements
Forklift : Caterpillar 930 H
Iron Roughneck : NOV ST-80 C
| |
| |
|
|
|
Id: WR914
 Gus Pech KH-48 Super George Drilling Rig - For Sale
Worldrigs ID: WR914
Description :
Gus Pech KH-48 Super George Drill Rig
Tandem Axle
Day Cab
Mack Diesel Engine
Camel Back Suspension
Double Pump Unit
Tilt Mast
SN: 41KSG48A1076
Maxitorque 13 Speed Transmission
Mounted on a 1993 Mack RB688S Truck
Average Tires
4-Point Stabilizers
Location : USA
| |
| |
|
Id: WR922
 Speedstar SS-210 Rotary Drilling Rig - For Sale
Worldrigs ID: WR922
Description :
1974 Speedstar Model SS-210 Rotary Drill Rig
Mounted on a 1974 CCC (Crane Carrier) Truck that has less than 10,000 Miles
Diesel Engine
Gardner - Denver Air Compressor WEJ 1009 - 7.75 & 5.5 X 6
Also has Stabilizes
Subs
Assorted Drill Bits
Hammer 10" & 8" & 6"
200 ft drill rods on Rotary Rig
1,000 ft extra drill rods
Fishing Tools
Original Book / Catalogs with info & parts numbers
Location : USA
| |
| |
|
Id: WR1029
 Drilling Rig for Sale-1.webp) Atlas Copco T4BH (Blasthole) Drilling Rig - For Sale
Worldrigs ID: WR1029
Description :
2010 Atlas Copco T4BH (Blasthole) Drill Rig - S/N: 9089
Cummins QSK19 Diesel Deck Engine - rated 755HP & 1800 RPM (11.3 Hours on Meter)
IR HR2.5 1250 cfm / 350 psi Air Compressor
2 Motor Spur Gear Power Head
37,500 LBS of Pullback
5 Rod Carousel Set Up for (3) 7” Drill Pipe
Hammer Lubrication
2 Piston Bean Water Injection
2010 Mounted on a CCC (Crane Carrier Company) Truck - VIN#1CYDCV580AT049672
Caterpillar C13 Diesel Engine - rated 325 HP
Jake Brakes
8LL Speed Transmission
Note: Can be converted to T4W or T4W DH for water well drilling for an extra cost
Note: Bill of sale only
Location : USA
| |
| |
|
|
|
Id: WR908
 Joy MS-4E Top Hammer Air Driven Drilling Rig - For Sale
Worldrigs ID: WR908
Description :
Joy MS-4E Top Hammer Air Driven Drill Rig
Mounted on a crawler carrier
Ideal for small blastholes, estimated range 2-1/2" to 4" OD
Runs
Joy Drifter.
Pneumatically powered,
Can be set up with tow behind or nearby air compressor for both crawling and drilling
Location : USA
| |
| |
|
Id: WR1063
 Bucyrus Erie 60L Cable Tool Drilling Rig - For Sale
Worldrigs ID: WR1063
Description :
Bucyrus Erie 60L Cable Tool Drill Rig
Has A Casing Strut
Iveco 4-Cylinder Diesel with 1,000 Hours
Extendable Bumper Outriggers to Fasten Guide Wires to
Replaced Shock on Mast 2-Years Ago
Cable need to be replaced
Rope Socket & 3-3/4" Jars
Mounted on a newer 1999 Sterling Truck
734,138 Miles Showing on Meter
Powered by a Caterpillar 3406 Diesel Engine
Eaton Fuller 10 Speed Transmission
Air Ride, Cruise, Tilt, Power Windows
GVWR 52,000 lbs
Location : USA
| |
| |
|
Id: WR1015
 Derex 2630-22 MATH Drilling Rig - For Sale
Worldrigs ID: WR1015
Description :
Derex 2630-22 MATH (Mud – Air – Top – Head) Drill Rig
Truck
Peterbilt 567
Paccar 13 Litre.
Allison 6 speed automatic
Air ride
Transfer Case
Namco (oilfield quality)
Safe Shift
Hydraulic System
Sundstrand, Bosch Rexroth plus gear pump
Top Head
Variable torque and RPM with 2” thru-hole
0-160 rpm @ 8,000-lbf torque
Derrick & Feed System
26ft top head stroke
30,000-70,000 lbs pullback
20,000-lbs pulldown
120 FPM
Main Winch
12,000 lbs
Hydraulic 135° jib
Remote on helpers side for winch
Control Panel
Straight hydraulic controls (no electrics to fail)
Marine grade electric switches (for lights)
Murphy engine monitor display
Twin platforms
Leveling Jacks
Four 36” stroke independently controlled
Night Lights
6 LED night lights
Toolboxes
30”x 18” x 18”
Overall Dimensions
Length: 38”
Width: 8ft 6”
Derrick up height: 42ft
Derrick down height: 13ft 4”
Water Injection
9-GPM FMC injection pump
Gross Weight
44,000lbs - 46,000lbs
Pre-Order Drill from EWDAdditional Options
4 – 6 Month Leadtime from Date Ordered
Sand Line Winch
1,500ft sand line
Mud Pump
3x2x13 centrifugal 300 gpm/300 psi
Centerline piston 150 gpm/600 psi
Line Oiler
Many oilers available
Water InjectionOffsyder Rod Handling System
18 gpm FMC injection pump
Drill Pipe Packages
Wire Feeder and Box
Hydraulic or Gas Welders
Location : USA
| |
| |
|
|
|
Id: WR1001
 Failing 1500 Holemaster Drilling Rig - For Sale
Worldrigs ID: WR1001
Description :
Failing 1500 Holemaster Drill Rig
Table Drive Rotary
Kelly Bar
Draw works
Mounted on a GMC Truck 6x6
PTO Drive from Truck Engine
Hydraulic Operators Controls
Failing FM-45 Duplex Mud Pump
FMC (Bean) Water Injection Pump
Moyno Water Pump
Hydraulic Leveling Jacks
Location : USA
| |
| |
|
Id: WR835
 LTO 350 & 550 Cooper Copy Workover Rig - For Sale
Worldrigs ID: WR835
Description :
Carrier :
New Tear 3 emmision – 14 liter 475- 525 HP Detroit 6 cylinder diesel engine.
Allison CLT5861 transmission with 680 torque converter.
Single man cab, 18ft x 60 lbs. I – beam, 39ft 10” long.
Walkway 2/3 down drillers side.
20,000 lbs tandem front axels, FL941 Meritor 50,000lbs independent
rear axels with a 6.14 ratio and a 20,000lbs drag axel air ride suspension.
All independent & Anti lock breaks.
Tires are 65R-445 front super singles and 1100-24.5 rear duels.
4 hydraulic leveling jacks.
C/W Polished aluminium wheels, (note inside wheels are steel outside wheels
are polished aluminum on rear duals) one 8,000lbs & one 5,000lbs hydraulic
winches.
Drawworks (350 Class Rig) :
LTO 350 Cooper Copy 42 X 12 main drum 224 PTI (Wichita copy) out board clutch,
38 X 08 sand drum 124 PTI (Wichita copy) out board clutch sand drum. Drum holds
14,000ft of 9/16" line, main drum grooved for 1" drill line,550 R/A gear box.
48.5" disc assist brake.
Drawworks (550 Class Rig) :
LTO 550 Cooper Copy 42 X 12 main drum 324 PTI (Wichita copy) out board clutch,
42 X 08 sand drum 224 PTI (Wichita copy) out board clutch sand drum. Drum holds
16,500ft of 9/16" line, main drum grooved for 1" or 1 1/8" drill line. 550 R/A
gear box.
Mast (350 Class Rig) :
200,000lbs X 103ft Harold Lee style mast. 4"X4"1/4"(A-36) square leg material
double tubing board and triple rod basket, hydraulic raised and scoped.
Mast (550 Class Rig) :
250,000lbs X 103ft Harold Lee style mast. 5"X5"3/8"(A36) square leg material
double tubing board and triple rod basket, hydraulic raise and scoped.
Weight :
350 Class Rig weight approx. 84,300lbs. with no tools, blocks or lines.
550 Class Rig weight approx. 88,800lbs. with no tools, blocks or lines.
Location : USA
| |
| |
|
Id: WR960
 Atlas Copco ECM-660 III Rock Drilling Rig - For Sale
Worldrigs ID: WR960
Description :
2006 Atlas Copco ECM-660 III Rock Drill Rig
Montabert Hydraulic Drifter
HC160 Reverse Percussion Top Hammer
Carousel Rod Changer
Air Compressor
Cummins Diesel Engine
Location : USA
| |
| |
|
|
|
Id: WR402
 Drillmec HH 300 Drilling Rig for Sale
Worldrigs ID: WR402 This rig has 2ea. 1600 HP Electric Weatherford pumps, Drilled 4 wells.
1ea. 1000 HP additional pump
Rig Characteristics & General Data :
Type : Hydraulic
Design : Drillmec
Year of Construction : 2011
Number of Joints per Trip Stand : 1
Nominal capacity with 5" DP : 12,8000 ft DP 5"
Power type : Electric
Number of Loads (rig + camp) : 65
Nominal Drilling depth range 12,000 feet with 5” drill pipes
Equipment configuration pipes 3 axle Semi-Trailer Land Rig
Drilling Equipment :
Carrier : Drillmec HH300, Truck dual traction.
Telescopic Mast : Drillmec Telescopic mast raised and lowered by two chrome- plated
double-acting hydraulic cylinders. 92’ high.
Vertical Pipe rack
Max. static hook capacity : 600,000 lbs
Hydraulic Unit, Rated input power 1500HP. Hydraulic auxiliary brake
Pipe Handler : Automatic
Power : Three (3) CAT 3512 Diesel Engine, 1321HP-1200RPM, driving
with one Generator SR4B 1000KVA each.
Mud pumps : Three (3) Drillmec TF-1000, 1.000 HP, , triplex pumps, driven y DC electric motors.
Rotary table : DRILLMEC HYDR (27½” opening), independent motor. Rated
load capacity 400’000lbs.
Substructure : DRILLMEC 22’ high, 17 section pipe rack, rotary beams capacity 600’000 lbs.
Crown block : DRILLMEC with 8 x 42” sheaves grooved for 1 5/8” drilling line.
Rated load capacity 300tons.
BOP :
HYDRIL GK 13 5/8” x 5000 psi WP annular preventer,
CAMERON 13 5/8” x 5000 psi WP double rams.
Top Drive Drilling System : DRILLMEC HYDRAULIC M14V, 600’000 lbs hoisting capacity,
375KW power drilling, hydraulic drive, Drilling Speed range 0 to 200 RPM, 36,140 LB/FT @ 70 rpm
Fully hydraulic allow higher safety and improved control of drilling parameters
Hydraulic Power Tong : DRILLMEC HYDRAULIC Power Tong
PCR : 3x3 IEC SYSTEMS, 600VAC input, 0-750VDC output.
Down Hole Tubular Material : DP 5” G105 R3 19.5lb/ft; DP 3 ½” S135 13.3 lb/ft
Mud System : Active System tank volume 1600bbls (intermediate, suction, pill tank), one water
tank 500bbls, One 500bbls collecting fluids Three King Cobra Shaker 500 GPM, one mud conditioner
One atmospheric Degasser
| |
| |
|
Id: WR985
 Atlas Copco RD20 Range III Drilling Rig - For Sale
Worldrigs ID: WR985
Description :
2005 Atlas Copco RD20 Range III Drill Rig - S/N:6923
CUMMINS QSK19 Diesel Deck Engine - S/N: 60604066
IR 1250 cfm / 350 psi Rotary Screw Air Compressor with Cooler
FMC Triplex Mist Pump
Compound with (4) Hydraulic Pumps
Mounted on a CCC (Crane Carrier Company) Truck - VIN: 1CYDGV5875T046700
CAT C-13 Diesel Engine
FULLER 8-Speed Transmission
(4) Hydraulic Leveling Jacks
Drillers Control Console
(2) Hydraulic Mast Raising Rams
425/65R22.5 Front & 11R-22.5 Rear Tire
Note: Can be purchased with or without mounting the Range III Tower with
120,000 lbs of pullback & table at EWD cost extra
| |
| |
|
Id: WR635
 Rack & Pinion, Super Single Drilling Rig for sale
Worldrigs ID: WR635 General Description
Estimated Drilling Depth : 10,000 ft
Estimated Rig Move Loads : 22
Estimated Camp Move Loads : 4
Rated HP : 850
Mast
Height : 80.00 ft
Static Hook Load Capacity: 300,000 lbs
Mast Racking Capacity : N/A
Substructure
Style : Parallelogram
Height : 14.00 ft
Clear Height : 11.00 ft
Casing Capacity : 300,000 lbs
Maximum Setback Load (lbs.) : 300,000
No Drawworks
Top Drive / Power Swivel
Make : Tesco
Model : 250 HMI 475
Capacity : 250 Ton
Torque - Continuous : 21,000 ft-lb @ 56 rpm
No Swivel
No Rotary Table
Power Generation
Engines : 3 ea. Detroit Diesel Series 6063HV35
Generators : 3 ea. Stamford Power System HCI534D
SCR / VFD / DC/DC : Rack & Pinion Rig
Enhancements
Iron Roughneck : NOV IR-3080-55-AHM
Mud System
Mud Pumps : 2 ea NOV F-800
Power Rating : 800 hp @ 150 spm
Reserve Mud Volume : 0 bbls
Pressure Rating : 5,000 psi
Active Mud Volume : 700 bbls
Shale Shakers : 2 ea. MI Swaco
Desander : N/A
Desilter : N/A
Mud Cleaner : N/A
Centrifuge : N/A
Well Control
Choke Manifold : 2 1/16" 5,000 psi
BOP Closing Unit : Control Technology, 5 station 3,000 psi
| |
| |
|
|
|
Id: WR937
 8T Pump Hoist Rig for Sale
Worldrigs ID: WR937
Description :
2008 Smeal 8T Pump Hoist Rig
Mounted on a 2008 Ford F-650 Super Duty 4x2
Truck has a Cummins 6.7 Diesel engine
Hydraulic Brakes
124,478 Miles on gauge
Location : USA
| |
| |
|
Id: WR995
 Schramm T64HB Drilling Rig - For Sale
Worldrigs ID: WR995
Description :
1977 Schramm T64HB Drill Rig
Mounted on a GMC truck
Odometer 63,913 miles
425 cfm / 250 psi piston air compressor
Included with bushings, tooling, (2) hammers 6" and 5" just bought
a long with 3 brand new bits 8", 6" and a 5"
Lazy Susan Carousel
Has 540 ft of drill pipe
Owner have drilled 9 wells with it including 2 that went 505 ft and one that went 405 ft
Mud pump shown in photo is “NOT” included.
Location : USA
| |
| |
|
Id: WR955
 Mobile B-53 Drilling Rig - For Sale
Worldrigs ID: WR955 Description :
1990s Mobile B-53 Drill Rig
Moyno progressive cavity pump
SPT Auto Hammer
Rod clamp and more as can be seen in pictures
Numerous augers and other tooling included
Drill showing 4031 hours, appears to be ready to go to work today
Mounted on Ford F800 diesel truck
20560 miles on gauge
Location : USA
| |
| |
|
|
|
Id: WR1069
 Ingersoll-Rand TH60 Drilling Rig - For Sale
Worldrigs ID: WR1069
Description :
Mid-1976 Ingersoll-Rand / Cyclone TH60 Drill Rig
Mounted on a newer 2012 International Workstar Truck
Rated 425hp Diesel Engine
10 Speed Eaton transmission
Centrifugal 4x3x13 Mud Pump (hydraulic driven)
280 ft of Drill Pipe (20ft x 4-1/2” x 2-7/8” IF) & Tooling
Note: no air compressor on board
Location : USA
| |
| |
|
Id: WR923
 Generic 913 Cubex Drilling Rig - For Sale
Worldrigs ID: WR923 Description :
1997 913 Cubex Drill Rig
Caterpillar C15 Diesel Deck Engine - rated 600+HP with only 737 low hours
Sullair 900/350 Air Compressor
It is setup for reverse circulation
Has a Masabi Cooling System
Drills with 13 ft Rod
Comes with All Tooling
The rig is in good running condition
Location : North American Region
| |
| |
|
Id: WR1041
 Chicago Pneumatic T650WS Drilling Rig - For Sale
Worldrigs ID: WR1041 Description :
1978 Chicago Pneumatic T650WS Drill Rig
GHH 825 cfm / 300 psi Air Compressor
CAT 3406 Diesel Deck Engine (recently install reman head on deck engine)
2 Piston Bean water injection pump
Hammer lubricator
300 Ft of drill pipe (20ft mix) - 4” & 4-1/2” mixed & 20 ft 3-1/2" Thread
Mounted on Ford Truck - VIN#: U81QVCC9241
CAT 3208 Diesel Engine
Note: Bill of Sale only & no title available
Location : USA
| |
| |
|
|
|
Id: 9000-389
 F200-DEC Drilling Rigs 1780 hp for Sale
Worldrigs ID: WR33 Description
F200-DEC (Two Available) Drilling Rigs
1780 HP Mechanical Land Drilling Rigs
Drawworks :
Upetrom type TF25, Rated input power 1780HP, Drilling line
guide Upetrom, Upetrom Make-up cathead & Break-out cathead,
FH 46 Brake, 175 bbl Brakes cooling system capacity, water
cooled, DAAS Automatic drilling control, Upetrom Crown-O-matic
device, powered by (1) Faur motor and (1) MB820 motor 890 HP each.
Mast :
MA 200 Upetrom mast, 137’, 441,000# SHL, 10 lines, racking capacity
of 10,499’ of 5”
Crown Block : Upetrom 240 ton with 6 sheaves grooved for OD 1-1/4” line
Substructure : Upetrom 26’7” x 32’3”, 715,000# setback, 16’4” drill floor height, ,
Clear height between rotary beams and ground level , 3.8
Travelling Block : Upetrom 5-32-MC 200, 200 Ton block, 5 sheaves
grooved for OD
1-1/4” line
Hook Block : Upetrom 200 Ton
Air Winches : (2) Upetrom TP1200, 2400# rated
Drilling Line : Mechel Campia Turzil, 1-1/4" x 1900'
Deadline Anchor : Martin Decker 131T, 75,000# static capacity
with OD 1-1/4” drill
Rotary Table : Upetrom MRL 275, 27 ½”, 500 Ton, powered by
FAUR MB 820 motor (890 HP)
Master Bushing : Upetrom, two sided, 27 ½”
Kelly Bushing : Sterom hexagonal/square
Swivel : Upetrom CH200, 200 Ton capacity, 5000psi
Kelly Spinner : Upetrom DIBA
Mud Pump No. 1 : Upetrom 2PN700, 700 HP, with AP-210
pulsation dampeners powered by Electroputure Craiova
MCF 550 KW motor, 737 HP
Mud Pump No. 2 : Upetrom 2PN700, 700 HP, with AP-210
pulsation dampeners powered by Electroputure
Craiova MCF 550 KW motor, 737 HP
Mud Pump Suction Lines : (2) 10” suction lines with (2) Upetrom line
Mud Discharge Lines (Each pump have separate line) : (2) 4” flexible line section
vibrating hose, 5000psi
Stand Pipe Manifold : RON 4 x 5000 connection ends, Cameron valves, 4”Dia, 5000 psi
Stand Pipe : (1) 60’ stand pipe, 4”Dia, 5000 psi
Rotary Hose / Circulating Hose : (2) Phoenix Oradea, 60’, 5000 psi
Engine Generator Sets : (2) Caterpillar 3512, 1725HP
AC Generators : Caterpillar CAT 1750, 1750 KVA, 380 V, 50 Hz
DC Generators/Emergency Generator(S) : (1) Caterpillar GEP 150, 150 KVA, 380V, 50Hz
Air Compressor(S) : (2) Timpuri NOI model
Mud Tanks General : (7) tank system, 2100 bbl total capacity, total usable volume of 1890 bbls
Mud tank No. 1 – 300 bbl : Sand/Trip tank, Neptun SA/2NB16-VO5 electrical agitator
powered by 10HP electric motor, 403x108x102 33’6” x 9’ x 8’6”
Mud tank No. 2 – 300 bbl : Cleaning tank, (3) Neptune SA/2NB16-VO5 agitators
powered by 10HP electric motor, 26’3” x 9’ x 8’6”
Mud tank No. 3 – 300 bbl : Mud tank, (2) Neptun SA/2NB16-VO5 electrical agitators
powered by 10 HP electric motor, 26’3” x 9’ x 8’6”
Mud tank No. 4 – 300 bbl : Mud Tank, (2) Neptun SA/2NB16-VO5 electrical agitators
powered by 10 HP electric motor, 26’3” x 9’ x 8’6
Mud tank No. 5 – 300 bbl : Mud Tank, (2) Neptun SA/2NB16-VO5 electrical agitators
powered by 10 HP electric motor, 26’3” x 9’ x 8’6
Mud tank No. 6 – 300 bbl : Reserve Tank, 26’3” x 9’ x 8’6
Mud tank No. 7 – 300 bbl : Reserve Tank, 26’3” x 9’ x 8’6
Hoppers And Agitators : (2) mud hoppers, (9) Neptun Campina mud agitators p/b 10HP electric
Shale Shaker : (2) Swaco ALS shakers incl. ditch magnet
Mud Cleaner : SWACO (12) 4”cone D-silter, (2) 12” cone D-sander, Aversa Bucuresti centrifugal pump
Degasser : Upetrom vacuum, Aversa Bucuresti centrifugal pump p/b 75 HP motor, mud-gas separator
Trip tank : 300 bbl
Annular Preventer : Upetrom 13 3/8” x 5000, 9” x 5000, 5000 psi
Ram Type Preventer : Upetrom 13 58/8”, 9”, 5000 psi, single or double
Accumulator : (1) 1000 gallon, 2000 psi with Upetrom P6U remote control panel
Choke Manifold : 3'' X 5000
Ancillary Equipment : Drill pipe elevators, pipeslips, pipe casing protectors, collar elevators,
collar slips, safety clamps, elevator links, bit breakers, bit gauges, casing slips for rotary table,
casing elevators, casing tongs casing circulating heads, thread protector, fishing tools
Instrumentation : Weight Indicator, mud pump pressure gauges, rotary speed tachometer,
tong torqueindicator, mud pump stroke indicator & totalizers, mud pit volume indicators,
mud flow volume indicator, drill parameter recorder, drilling drift, mud testing equipment,
Miscellaneous : gas maske, air breathing apparatus spare bottles, first aid equipment, sour gas
monitoring system, portable combustible gas detector, fire fighting equipment
Camp Site : Senior sleeper with attached bath, junior sleeper, (2) recreation rooms, Kitchens and
Mess rooms, camp spares, laundry container, dry store container, showers, toilets, water tank,
generator and
| |
| |
|
Id: WR1013
 Schramm T450M Drilling Rig - For Sale
Worldrigs ID: WR1013
Description :
2005 Schramm T450M Drill Rig
Note: Set up for core drilling
Mounted to a 2006 AWD International Truck
10-speed transmission
300 HP DT466 with 7400 miles
Sullair 300 cfm / 200 psi air compressor (locked up)
5 x 6 Gardner Denver mud pump
Moyno pump
Centrifugal pump
Winch
Sand line
UDR KL400
Sandvik hands-free table
Have table bushings and breakout fork for normal rod
Rod loader
Rig was used for core drilling but no core barrels included
Location : USA
| |
| |
|
Id: WR954
 Diedrich D120 Drilling Rig - For Sale
Worldrigs ID: WR954
Description :
1991 Diedrich D120 Drill Rig
John Deer inline 6 (rebuilt less than 7 years ago with minimum hours)
Engine Serial #: T06059D473497
1235.1 Hours
Rebuilt transmission 2/21/17
Moyno 3L8 Pump
500 gallon water tank
Cathead
Fluted kelly
(2) auger racks Tool boxes,
(4) outriggers, 3k, 7k, 10k Winches
Duel mounted swinging auger racks
Mounted on a 1996 Freightliner FLD120 Truck
Rockwell 10 speed transmission
151,777 Miles showing on dash
Location : USA
| |
| |
|
|
|
Id: WR911
 Ingersoll Rand DM30 Drilling Rig for Sale
Worldrigs ID: WR911
Description :
Truck : Navistar international 7600.
Year of the truck : 2012.
Truck miles : 72.000 miles
Drilling Rig Hours reader : 7923 (5) x 1/10
Engine : Cummins KAT19 550 HP
Compressor : Simma Sullair mounted over truck 1050 CFM – 350 PSI.
Fully equipped Drilling Rig
The equipment is fully operating and under drilling contract right now
Aditionals included: FMC WaterPum, 2 heavy duty operational winch.
Additional not included: 120 meters of drilling rods 4 ½ api
Location : Santiago, Chile
| |
| |
|
Id: WR814
 National 650HP Drilling Rig for Sale
Worldrigs ID: WR814
General Description
Year Built/Rebuilt : 1985/2011
Estimated Drilling Depth : 8,200 ft
Estimated Rig Move Loads : 39
Estimated Camp Move Loads : 35
Rated HP : 650
Mast
Height : 113.00 ft
Static Hook Load Capacity : 286,000 lbs
Mast Racking Capacity : 10,000 ft
Substructure
Style : Telescoping
Height : 14.10 ft
Clear Height : 11.22 ft
Casing Capacity : 286,000 lbs
Maximum Setback Load (lbs) : 198,000
Drawworks
Make : National
Model : 4226D
Power Rating : 650 hp
Input Power : 1 ea Caterpillar D 3412
Drilling Line Size : 1 1/8"
Auxillary Brake : Parmac V-80
Top Drive / Power Swivel
No Top Drive
Swivel
Make : Upetrom
Model : CH 125
Capacity : 125 Ton
Rotary Table
Make : Upetrom MRS205
Table Opening : 20 ½
Maximum Load Rating : 350 Ton
Power Generation
Mechanical Rig
Mud System
Mud Pumps : 1 ea Upetrom 3PN-1000
Power Rating : 1,000 hp @ 150 spm
Pressure Rating : 5,000 psi
Active Mud Volume : 906 bbls
Reserve Mud Volume : 101 bbls
Shale Shakers : No Shale Shake, Mongoose
Mud Cleaner : N/A
Desander : N/A Brandt 10" X 2 Cones
Desilter : N/A
Centrifuge : N/A
Well Control
Annular : 9" 3,000 psi, Upetrom
Choke Manifold : Upetrom
| |
| |
|
Id: WR1082
 Portadrill / Winterweiss Drilling Rig for Sale
Worldrigs ID: WR1082
Description :
1974 Portadrill / Winterweiss Drill Rig
Mounted on a 1974 Ford F700 Truck
Gas Engine Ford 390
Three Line Rig with A Drill Line
Winch Line
Sand Line
4 Speed Table with No Issues
Tri Drive In Great Shape
Additional Clutch To Run An Additional Mud Pump Or Air Compressor
Multiple Drilling Bits
Multiple Subs To Run Different Size Drill Stem
Comes With 400 ft-500 ft of Newer Drill Stem With A Collar
Trailer and Hoses
Comes With Trimme Pipe
Bunch Of Tools And Spare Parts That Go With It
Duetz Air Cooled Motor with Twin Disc Clutch
3x4 Mission Magnum Centrifugal Mud Pump
Location : USA
| |
| |
|
|
|
Id: WR939
 CME 55 Drilling Rig - For Sale
Worldrigs ID: WR939
Description :
1998 CME 55 Drill Rig - Serial: 287885
Length : 14ft / Width : 96" / Mast height : 30ft
Moyno Pump
Safety hammer
Cat Head
Slide base and wiggle tail
Cummins B3.9c 110 HP 4 Cylinder 3.9L Diesel Engine - Serial: 45680855
Hours : 12,632
Poly tank
Capacity : 940L
Mounted on a 1998 GMC C7500 Truck - VIN: 1GDM7H1C2WJ515925
Miles : 289,463 on odometer
Caterpillar 3126 Diesel 6 Cylinder 7.2L Diesel Engine
Eaton Fuller Manual 9 Speed Transmission
Suspension : Spring
Brakes : Air
GVWR : 33,000 lbs
Wheelbase : 190"
AC, Heat
Front : 11R22.5, Rear Duals, Ironman Tires
Location : USA
| |
| |
|
Id: 9000-379
 Gardner Denver 500 - Mechanical Drilling Rig 700 hp - for Sale
Worldrigs ID: WR17 Description
Drawworks :
Gardner Denver 500
Powered by
Auxiliary Brake : Hydromatic Parmac V-80
Power :
2 Caterpillar D353TA 910HP Engines
Main Pump :
National, National 9-P-100
Powered by : Compound Driven
Standby Pump :
Oilwell 850 PT
Powered by : Caterpillar 3508 Engine
Mast :
131' Lee C. Moore 375,000# HL 8 lines
Substructure : 48' x 25' x 9'; 13' GL to KB
Traveling :
Block :
Brewster 5 sheaves
250 ton Combination
1 1/8" drilling line
Equipment :
Hook
Swivel : Skytop 5SX
Rotary Table :
Ideco 2350 23 1/2" Opening
Generators :
1 Caterpillar SR4 100 KW
1 Caterpillar SR4 180 KW
Powered by : 2 Caterpillar D3306 Engines
BOP Equipment :
Ram Preventor : 11" 3000 psi Double
Annular Preventor : 11" 3,000 psi annular
Closing Unit : 5 station 180 gallons
Mud System :
Working Pits:
Shale : 45' x 8' x 4'
Suction : 45' x 8' x 4'; 500 bbl
Premix Pit : 80 bbl
Mud Mixing Pump : 5" x 6"
Powered by : 50 HP Centrifugal
Solids Control Equipment :
Shale Shaker : Single Screen
Auxiliary Equipment :
Water Tank : 500 bbl
Fuel Tank : 6,000 gallons
Survey Instrument : Wireline unit
Mud House : 40' x 8' x 8'
Water Pump : 4" x 6" Duplex
| |
| |
|
Id: 9000-442
 National 610-E 750 HP Drilling Rig for Sale
Worldrigs ID: WR514 Drawworks
National 610-E 750 HP, Low low rated 405,000#, single
line pull, w/10 lines, and one GE 752 DC motor input.
Wichita Air actuated water cooled 325 disc brake,
1 ¼” wirerope 6x19 IWRC.
Prime Power
Ross Hill SCR System, (3) generator bays, (4) SCR bays,
(3) Detroit/MTU 12V2000 with Baylor 900 KW AC gen sets.
Auxillary
Cold start air system, primary rig air supply, floor hoisting
systems.
Mast/Substructure
DSI 142’, 650,000# hook load, with 12 lines strung, Singshot
design, 400,000# setback, Crown block (6) 50” sheaves 1 ¼”
groove, Fastline (1) 60” 1 ¼” grooved, hydraulic jack skidding
system.
Top Drive/Traveling Block/Pipe Handling
Varco TDS10SA VF AC 250Ton Top Drive, YC225 250 Ton Block,
Emsco 27 ½” Rotary/drwks driven.
Mud Pumps
(2) RSF 1000 triplex, 5,000psi, each driven by (2) GE 752 DC
motors.
Mud System
(2) tank system, 1000 bbl capacity, (2) Derrick FLC-504 shale
shakers, Derrick desander 2 12” cones with 5x6 centrifugal driven
by 100 HP electric motor, NOV Derrick desilter 12 4” cones with
6x8 centrifugal driven by 100 HP electric motor, NOV Derrick Vaccu
Flow 1200 Degasser, 48 x 20 gas buster.
BOP Equipment
11” 5000# annular, 11” 5000# double ram, 3000 PSI accumulator, 120
gal, 5 station with remote, 4 1/16” 5000# x 3 1/8” 5000# choke
manifold.
Fuel Tank : 18000 gal
Water Tank : 500 bbl
Auxiliary
Deadline Anchor, Weight indicator, Pump SPM and PSI, Top Drive VF
Control house, SCR system controls, manual Tongs, elevators, slips
and clamps
| |
| |
|
|
|
Id: WR1030
 Drilling Rig for Sale-1.webp) Atlas Copco T4BH (Blasthole) Drilling Rig - For Sale
Worldrigs ID: WR1030
Description :
2009 Atlas Copco T4BH (Blasthole) Drill Rig - S/N: 8887
Cummins QSK19 Diesel Deck Engine - rated 755HP & 1800 RPM
IR HR2.5 1250 cfm / 350 psi Air Compressor
Hour meter shows 3157.3 Hours
2 Motor Spur Gear Power Head with Foremost float sub
37,500 Lbs of Pullback
5 Rod Carousel set up for (3) 7” drill pipe
Hammer lubrication
2 Piston Bean water injection
2009 Mounted on CCC (Crane Carrier Company) Truck - VIN#1CYDCV58X9T048815
Caterpillar C13 Diesel Engine - rated 325 HP
Jake brakes
8LL Speed Transmission
Note: Can be converted to T4W or T4W DH for water well drilling for an extra cost
Location : USA
| |
| |
|
Id: WR584
 1500hp Top Oilfield Triple SCR Land Drilling Rig for Sale
Worldrigs ID: WR584
General
Rig Type or Model : Fast Desert Moving Rig
Built / Re-built :
Year Built/Re-built: 1981 / upgraded in 2007 / Cat IV 2013,
Assembled with new and recertified equipment April 2015
Operating Capabilities
Maximum Static Hook Load (lbs) : 750,000
Maximum Setback Load (lbs) : 500,000
Maximum Rotary Load (lbs) : 800,000
Mast
Make/type : Union Industrially & Enterprise / K Style Single Structure
Height - ft : 147 ft Drillfloor to Water Table
Width of base - (ft x ft) : 30 x 8
Width of top - (ft x ft) : 6.5 x 6.5
Static hook load - (lbs) : 800,000
With rated set-back - (lbs) : 500,000
Max rated hook load for 12 lines to travelling block (lbs) : 750,000
Substructure (Desert Big Wheel Package)
Make/type : UIE
Height -(ft) : Height of drillfloor 30
Width - (ft) : 43
Static setback capacity - (lbs) : Max rated setback 500,000
Rotary Capacity - (lbs) : 1,300,000
Drawworks
Make/type : National UE110
Rated capacity - HP : 1500
Input power continuous - HP : GE752 DC Motors 2 (750HP each)
Auxiliary brake : Elmagco (Eddy Current)
Crown Block
Make/type : UIE
Rated capacity - lbs : 800,000
No. of sheaves : 6 + 1 Fast Line x 50"
Travelling Block
Make/type : Gardner Denver
Rated capacity - lbs : 800,000
No. of sheaves : 6 x 50"
Hook
Make/type : National H500
Rated capacity - lbs : 1,000,000
Drilling Line
Size - inches : 1 3/8”. 6x9 EEIP,RRL/IWRC.
Make/Type : 6x9 EEIP,RRL/IWRC
Dead Line Anchor
Make/type : National EB
Load rating - lbs : 100,000
Rotary table
Make/type : National Model C-375
Drive : (independent or driven from drawworks) : GE 752
- Motor HP (if independent) : 500
Maximum opening - inches : 37.5”
Top Drive
Make & Type : Global Drilling Support / GDM 500
Electric or hydraulic : Electric
Rated capacity - lbs : 1,000,000
Test/working pressure - psi : 7500 / 5000
Rated power - HP : 800 HP
- continuous torque : 45000
- intermittent torque : 75000
Maximum rotary speed (RPM) : 250
- low gear : 40
- high gear : 200
Make-up / Break-out torque - ft-lbs : 80,000
Prime Movers (Tandem Trailers)
Quantity : 4
Make : Caterpillar
Type : 3512C
Continuous output power available HP each engine : 1476
AC- Generator
Quantity : 4
Make : Caterpillar
Type : SR4B
Continuous output power available HP each generator : 1401 Electric HP
Output ratings :
- kVa : 1492 kVa
- kW : 1045 kW
- Volts : 600 V
SCR System (Trailer)
Number of SCR bays : 4
Make : Rig Hill
Rig Service Air System
Air Compressors -
Quantity : 2
Make : Sullair
Model : 4509 P AC
Emergency Power
Quantity : 1
Make : Caterpillar
Model : C-15
Iron Roughneck
Make/Type : WR80 Wrangler Roughneck
Pipe handling range (inches) : 2-7/8” – 10”
Capacity : 80,000 Ft-lbs
BOP Annular
Quantity : 1
Make : Axon
Type : Type 52
Size (inch) : 13-5/8 5K
WP (PSI) : 5000 PSI
BOP Ram Type Preventer
Quantity : 1
Make : Axon
Type : Ram BOP Type50, Single
Single/double : Single
Size (inch) : 13 5/8"
WP (PSI) : 5000
BOP Ram Type Preventer
Quantity : 1
Make : Axon
Type : Ram BOP Type 50, Double
Single/double : Double
Size (inch) : 13 5/8"
WP (PSI) : 5000
BOP Accumulator Unit
Make : Top Oilfield
Reservoir capacity liter (gal) 534
No. of stations : 8
No. of bottles/banks installed : 24
Total bottle capacity liter (gal) : 360
Bottle working pressure (psi) : 3000
Choke Manifold
Make : Woodgroup
Size inch : 3-1/16"
Working Pressure (psi) : 10,000
Mud Pumps (Trailers)
Quantity : 2
Make : National
Model : 12-P-160
Power rating / pump (HP) : 1600
Mud pump driven by motors: no./type : 2Nos/DC Electrical
Continuous power rating of each motor : HP : 800Hp
Mud Tanks (Trailers)
Quantity : 3
Total capacity : bbls / m3 : 1720 BBL / 203.5 M³
Number of compartments : 9
Description/Capacity No. 1: bbl : Sand Trap - 170 BBL / 27.03 M³
Description/Capacity No. 2: bbl : Settling 50 BBL / 7.95 M³
Description/Capacity No. 3: bbl : Degasser 225 BBL / 35.77 M³
Description/Capacity No. 4: bbl : Desander 150 BBL / 23.84 M³
Description/Capacity No. 5: bbl : Desilter 150 BBL / 23.84 M³
Description/Capacity No. 6: bbl : Suction -1 , 115 BBL / 18.28 M³
Description/Capacity No. 7: bbl : Suction -2 , 210 BBL / 33.39 M³
Description/Capacity No. 8: bbl : Suction -2 / Mixing , 210 BBL / 33.39 M³
Description/Capacity No. Reserve : bbl : Reserve 440 BBL / 69.95 M³
Shale Shaker
Quantity : 2
Make : NOV
Type : King Cobra Venom
Desander
Make / type : Brandt / SRS-2
Cones :
- Quantity : 2
- Type : Hydro Cyclone
- Diameter : 12"
Desilter
Make / type : Brandt / SE-16
Cones :
- Quantity : 16
- Type : Urethane Hydrocyclone
- Diameter : 4"
Mud/Gas Separator
Make/type : Velath / Closed Bottom
Height of mud seal : 140"
Vacuum Degasser
Make : Miswaco
Type : Horizontal
Maximum capacity : 1000 GPM
| |
| |
|
Id: WR987
 Atlas Copco RD20 Range III Drilling Rig - For Sale
Worldrigs ID: WR987 Description :
2006 Atlas Copco RD20 Range III Drill Rig - S/N-21013
IR 1250 cfm / 350 psi Air Compressor with In & Out box
Cummins QSK-19 Diesel Deck Engine (7187 Hours since rebuilt around 2022)
120,000 lbs of Pullback
Bean Triplex Mist Pump
17-1/2" Table Opening
Mounted on a CCC (Crane Carrier Company) 5-Axle Carrier - VIN#:1CYDGV5806T047236
CAT C13 Diesel Engine
FULLER 8-Speed Transmission
(5) Hydraulic Leveling Jacks
425/65R22.5 Front & 11R-22.5 Rear Tires
Base Beams Main Hydraulic pump rebuilt in 2022
Note : Upgraded Atmospheric Downhole Pump Valve & HUSCO Valve Hydraulic
Actuated Controls
Note : No carousel
| |
| |
|
|
|
Id: WR1002
 Ingersoll-Rand T4W Drilling Rig - For Sale
Worldrigs ID: WR1002
Description :
1982 Ingersoll-Rand T4W Drill Rig
IR 900 CFM / 350 PSI Air Compressor
Detroit 12V71 diesel deck engine
Spur Gear top head (single motor)
8 pieces drill pipe (25ft x 4-1/2")
Working order
Location : Western Asia
| |
| |
|
Id: 9000-289
 Wilson Mogul 42 Double Trailer Mounted Rig for Sale
Worldrigs ID: WR23 Description :
Wilson Mogul 42 Double Trailer Mounted Rig
550 HP, Mechanical, +/- 6,000' Trailer Mounted Drilling Rig
A. Draw Works :
Single Drum Draw Works
Foster Model 27 AH break out Cat heads (serial # 1404)
Manual Braking System
1,500’ 1” drilling line, spooled, never used, still in protective coating
Driller’s console, with controls
B. Power :
Detroit Model 12V71 diesel engine
Engine rated for 550 peak Horse Power
Radiator and Electric starter
Allison Model TC955 torque converter
C. Substructure :
10’ Height
16’ Width (with walkways extended)
12’ Length
2 piece substructure
Box type structure, with rotary table beams
10’ W x 40’L back on ramp
Removable Stairways
Folding walkways
Safety railings
Lighting
Includes rat hole / mouse hole digger
D. Mast :
Wilson 102’ Height hydraulic derrick (serial #991-102-300)
Hydraulically raised with multiple scooping raising arm
Crown Block and Safety Platform
Pipe racking board
Standpipe
3” (ID) x 50’ long Kelly hose
Tong counterweights
Vapor proof lighting
Martin – Decker weight indicator
E. Rig Mounted Equipment :
Hydraulic Break Out Cylinder
Winch
Hydraulic Storage Tanks
Fuel tanks
Air compressor – Bendix Westinghouse Model TUFLO 1000
Deadline anchor
Hydraulic leveling jacks
Folding walkways, with stairs and safety railings
Rig Mounted on Tri Axle Trailer
Travelling and Rotating Equipment:
- Chain Driven Rotary Table - Gardner Denver Model 175
- Split Master Bushing
- Swivel - Gardner Denver Model SW 125
- Kelly - Brand New 40’Length x 4 1/4” Square Kelly
- Drive Bushing
- Travelling Blocks - 3 sheave blocks, grooved for 1” line
- WEBB-WILSON Hydra Hook Elevator Bales
- Rig set up to add an extra travelling block to increase all capacities
- Air Head Oiler
F. Casing, Pipe and Equipment :
7,000’ +/- 3 ½ OD drill pipe
3 ½ ” IF connection
4 ¾ ” OD flush drill collars, 3 ½” IF connections, slip recessed
6 ¼ ” OD with 4 ½ “ X-hole connection drill collars
2 Standard 32’ pipe trailers
1 Extended 35’ center trailer
G. Well Control Equipment :
Williams 11” annular BOP
Washington Rotating head assembly, complete with 16 ¾” air bowl
Assortment of Flanges including
Companion flange 13 5/8 x 13 3/8
Companion flange 13 5/8 x 9 5/8
Companion flange 13 5/8 x 7 inch
H. Custom Rig Doghouse :
8’W x 24’L trailer mounted dog house
Easy Access Front Porch
Rear porch where generator is mounted
Custom Built House for all tools
Storage areas
Breezeway
3000 gal fuel cell
Geolograph
Work Bench
Drilling Supplies
Night work lights
All mounted on 40’ trailer
I. Generator :
Stateline 10 KV generator with all necessary Switching gear, gauges and controls, mounted on Rig Doghouse Porch
Miscellaneous Equipment and Parts:
- Tool Trailer
- Soap tank with MYERS Model C20-8CR injection pump and 1 ¼ “ lubricator
- Soap pump powered by Waukesha Engine
- Assortment of casing elevators and single side door elevators
- 2” air pump
- Assortment of change over subs
- Dead man stakes and cable for rig tie down and secure lines
- Webb Wilson Type B tongs with assortment of tong jaws
- 4 ½ “ bottleneck drill pipe elevators
- Drill collar slips
J. Air System (available at additional cost) :
2001 Ingersoll Rand Airpac:
- Model number XHP1170
- Twin air compressors included
- Trailer Mounted
- Cat powered C15 engines capable of 525 HP
- Twin air units rated for 350 PSI and 1170 Cubic Feet each
- Both air unit have approx 7,600 hrs
- All units plumbed together
- compressor, complete with all necessary collers, gauges, valving and controls
| |
| |
|
Id: WR1072
 Atlas Copco T4W DH Drilling Rig - For Sale
Worldrigs ID: WR1072
Description :
2016 Atlas Copco T4W DH Drill Rig
IR HR2.5 1250 CFM x 350 PSI Air Compressor
Cummins QSK19 (rated 750 HP) Diesel Deck Engine
DH 70,000 lbs of Pullback Deep Hole
18 GPM Bean Water Injection Pump
7 Gallon DHD Oiler
Mounted on a CCC (Crane Carrier) Truck
Cummins ISM 410 (410 HP) Diesel Engine
Jake Brake
8LL with Full Locking Rears
Spur Gear Rotary Head
Main 7 Rod Carousel and 2 - 4 Rod Carousels (400 ft on the drill with a Starter Rod)
Angle Package
20" Table
All Aluminum Wheels, Fenders and Tool Boxes
All Engines are Pre-Emissions
Miles- 20,712
Hours- 2,629
Note: Currently in use every day
Location : USA
| |
| |
|
|
|
Id: WR948
 Speedstar Drilling Rig - For Sale
Worldrigs ID: WR948
Description :
1973 Speedstar Drill Rig
Cummins 350 Big Cam Diesel Engine
New Rig to Road Diverter Installed
Hydraulic Brakes Recondidtioned
New Hydraulic Control Lines
Single Double to 1,000 Meters
Convertible to Pulling Rig
Note: Driller says it Runs Good & potential for 1,000 Meters Drill Depth
Location : USA
Note: More pictures and information will be available soon
| |
| |
|
Id: WR1035
 IDM Drilling Rig - For Sale
Worldrigs ID: WR1035
Description :
Drawworks
Manufacturer : IDM Equipment
Model : IDM-1500
Power : 1500-HP
Motors : (2) Gulf Electroquip 800-HP DC Traction Motors
Serial Number : N/A (Asset DW005)
Hours : 11405
Engines
Manufacturer : Cummins
Model : KTA50DR Diesel Engines (x3)
Power : 1470-HP each
Features : Air Start, Skid Mount Enclosures with Generators
Generator Sets
Manufacturer : AVK, WEG
Model : DSG 86 L1-6W
Capacity : 1050-KW each (x3)
Features : Unitized with Engines, Includes SCR Skid
SCR House
Configuration : IDM SCR 3x4
Mast
Manufacturer : IDM
Type : 136ft Telescoping Mast
Model : QDS-1500
Serial Number : M-5698
Capacity : 750,000-LB Hook Load
Features : Can Accommodate 350-Ton Drive, Geronimo Line,
Hydraulic Lift Cylinders, Mast Dolly
Substructure
Manufacturer : IDM
Type : 22ft Hydraulically Telescoping Substructure
Capacity : 750,000-LB Rotary Load, 450,000-LB Simultaneous Setback
Features : Integrated Drainage System, (2) Braden Floor Winches
Rotary
Manufacturer : EMSCO
Model : Type 371⁄2 Rotary
Drive : Independently driven by (1) Hydraulic Drive Motor
Blowout Preventer (BOP)
Configuration :
(1) 11’’ 10M Shaffer Type Double Ram BOP
(1) 11’’ 10M Shaffer Type Single Ram BOP
(1) 11’’ 5M Shaffer Type Annular
(1) 6 Station Accumulator, Beijing Petroleum, Model FXQ720-6, API 16E
10,000-LB Flexible Choke Line and 4ft x 4’’ 10,000-LB Choke Manifold
Mud Pumps
2X Mud Pumps - FB1600 Continentail EMSCO
Mud System
Total Active Capacity : 848 Barrels
Components :
(2) Covered 424-Barrel Tanks with Round Bottoms and Electric Agitators,
each containing (2) 5x6x75-HP Centrifugal Pumps, Remote Hopper Skid
(1) Mud Processing Skid, Hydraulically Raised, with (3) Brandt King
Cobra Shakers, Brandt DG-10 Degasser, Brandt 16 Cone Desilter
(1) Trip Tank Skid, 106-Barrel Capacity, with 2x3x25-HP Centrifugal Pump
Top Drive
1 X 350 T Top Drive Canrig
Overhead String
Configuration : 400-Ton Six Sheave Block with a 12 Line String Up of 1-3/8’’
Driller Controls
Type : Drillers Cabin Skid
Features : Varco Electronic Driller and Block Control System, Block
Speed Controls, JoystickControlled Drawworks Speed, Touch Screen and
Manual Control of EDRILL and SCR
Auxiliary Equipment
Automatic Catwalk : Forum, S/N LW09072189PWC51 PW
Wireline Unit : Five Star Rig with 25,000’ of .092 Wireline
Motorized Drill Line Spool
Quarters : Toolpusher and Crew Quarters, Skidded, Furnished, Satellite System
Meeting and Change House Combo Skid
Hydraulic Power Unit Skid with Centrifugal Pumps and Reservoir
Pipe and Kelly Spinner : Hydraulic (Hawk, Spinmaster, Model 550-H)
Fuel Tank : 12,000 Gallons, Double Wall, Skidded with Pump
Water Tank Skid with Centrifugal Pumps
Hot Water Power Washer
Location : USA
| |
| |
|
Id: WR1042
 CME 850 Drilling Rig - For Sale
Worldrigs ID: WR1042
Description :
1999 CME 850 Drill Rig - Serial: 292492
Hours : 8,683 on meter
Cummins 4BT Diesel Engine with 4 Cylinders
Transmission : Hydrostatic 5-speed with reverse
Features : Mast height: 23 ft
Pump : Moyno 3L8, Size: 3" diameter
Mounted on a Track Carrier
Tracks Width : 33" Rubber/Steel
Auto hammer
Front winch
28,275 lbs of Pullback
Notes : Runs and drives when tested last
Location : USA
| |
| |
|
|
or call +65 97571950. 
